Electrochemical characterization of new electric double layer capacitor with polymer hydrogel electrolyte

Biorenewable Calcite as an Inorganic Filler in Ionic Liquid Gel Polymer Electrolytes for Supercapacitors

Supercapacitors play a crucial role in the global shift toward cleaner, renewable energy and away from fossil fuels. Ionic liquid electrolytes have a larger electrochemical window than some organic electrolytes and have been mixed with various polymers to make ionic liquid gel polymer electrolytes (ILGPEs), a solid-state electrolyte and separator combination. One way to improve the conductivity of these electrolytes is to add inorganic materials such as ceramics and zeolites to increase their ionic conductivity. Herein, we incorporate a biorenewable calcite from waste blue mussel shells as an inorganic filler in ILGPEs. ILGPEs composed of 80 wt % [EMIM][NTf₂] and 20 wt % PVdF-co-HFP are prepared with various amounts of calcite to determine the effect on the ionic conductivity. The optimal addition of calcite is 2 wt % based on the mechanical stability of the ILGPE. The ILGPE with calcite has the same thermostability (350 °C) and electrochemical window (3.5 V) as the control ILGPE. Symmetric coin cell capacitors were fabricated using ILGPEs with 2 wt % calcite and without calcite as a control. Their performance was compared using cyclic voltammetry and galvanostatic cycling. The specific capacitances of the two devices are similar, 110 and 129 F g^-1, with and without calcite, respectively.

Electrical and Capacitive Response of Hydrogel Solid-Like Electrolytes for Supercapacitors

Flexible hydrogels are attracting significant interest as solid-like electrolytes for energy storage devices, especially for supercapacitors, because of their lightweight and anti-deformation features. Here, we present a comparative study of four ionic conductive hydrogels derived from biopolymers and doped with 0.1 M NaCl. More specifically, such hydrogels are constituted by κ-carrageenan (κC), carboxymethyl cellulose (CMC), poly-γ-glutamic acid (PGGA) or a phenylalanine-containing polyesteramide (PEA). After examining the morphology and the swelling ratio of the four hydrogels, which varies between 483% and 2356%, their electrical and capacitive behaviors were examined using electrochemical impedance spectroscopy. Measurements were conducted on devices where a hydrogel film was sandwiched between two identical poly(3,4-ethylenedioxythiophene) electrodes. The bulk conductivity of the prepared doped hydrogels is 76, 48, 36 and 34 mS/cm for PEA, PGGA, κC and CMC, respectively. Overall, the polyesteramide hydrogel exhibits the most adequate properties (i.e., low electrical resistance and high capacitance) to be used as semi-solid electrolyte for supercapacitors, which has been attributed to its distinctive structure based on the homogeneous and abundant distribution of both micro- and nanopores. Indeed, the morphology of the polyestermide hydrogel reduces the hydrogel resistance, enhances the transport of ions, and results in a better interfacial contact between the electrodes and solid electrolyte. The correlation between the supercapacitor performance and the hydrogel porous morphology is presented as an important design feature for the next generation of light and flexible energy storage devices for wearable electronics.

Fundamental Concepts of Hydrogels: Synthesis, Properties, and Their Applications

In the present review, we focused on the fundamental concepts of hydrogels-classification, the polymers involved, synthesis methods, types of hydrogels, properties, and applications of the hydrogel. Hydrogels can be synthesized from natural polymers, synthetic polymers, polymerizable synthetic monomers, and a combination of natural and synthetic polymers. Synthesis of hydrogels involves physical, chemical, and hybrid bonding. The bonding is formed via different routes, such as solution casting, solution mixing, bulk polymerization, free radical mechanism, radiation method, and interpenetrating network formation. The synthesized hydrogels have significant properties, such as mechanical strength, biocompatibility, biodegradability, swellability, and stimuli sensitivity. These properties are substantial for electrochemical and biomedical applications. Furthermore, this review emphasizes flexible and self-healable hydrogels as electrolytes for energy storage and energy conversion applications. Insufficient adhesiveness (less interfacial interaction) between electrodes and electrolytes and mechanical strength pose serious challenges, such as delamination of the supercapacitors, batteries, and solar cells. Owing to smart and aqueous hydrogels, robust mechanical strength, adhesiveness, stretchability, strain sensitivity, and self-healability are the critical factors that can identify the reliability and robustness of the energy storage and conversion devices. These devices are highly efficient and convenient for smart, light-weight, foldable electronics and modern pollution-free transportation in the current decade.

Hydrogel-Polymer Electrolyte for Electrochemical Capacitors with High Volumetric Energy and Life Span

AC/AC (AC=activated carbon) electrochemical capacitors (ECs) were designed with a 1 mol L^-1 lithium sulfate hydrogel- polymer electrolyte (HPE) based on carboxymethyl cellulose sodium salt (CMC). The electrochemical performance of the ECs was compared with that of cells composed of common separators such as a polyolefin membrane (Celgard 3501, polypropylene separator coated by surfactant) and a glass microfiber membrane (Whatman GF/A). The ECs with Celgard 3501 and home-made CMC-HPE demonstrated a higher volumetric energy than that with Whatman GF/A. However, after 120 h of floating at 1.5 V, the capacitance of the EC with Celgard 3501 decreased dramatically by 25 %, whereas with CMC-HPE and Whatman GF/A, the decrease was only 4 and 6 %, respectively. Post-mortem observations of the Celgard 3501 separator after floating suggested that the surfactant layer was removed, which caused a decrease of separator wettability, as confirmed by the slow evolution of the electrolyte contact angle on its surface. Hence, CMC-HPE is a very attractive option to develop aqueous-electrolyte-based ECs with an excellent life span and high volumetric energy density.

Designing a Novel Polymer Electrolyte for Improving the Electrode/Electrolyte Interface in Flexible All-Solid-State Electrical Double-Layer Capacitors

A novel copolymer, polyurethane-poly(acrylic acid) (PAA), is successfully synthesized from poly(acrylic acid) (PAA) backbone cross-linked with waterborne polyurethane (WPU). This sticky polymer, which is neutralized with 1 M KOH and then soaked in 1 M KOH (denoted as WPU-PAAK-K), provides an ionic conductivity greater than 10^-2 S cm^-1 and acts as a gel electrolyte perfectly improving the electrode/electrolyte interfaces in a flexible all-solid-state electrical double-layer capacitor (EDLC). The PAA backbone chains in the copolymer increase the amount of carboxyl groups and promote the segmental motion. The carboxyl groups enhance the water-uptake capacity, which facilitates the ion transport and promotes the ionic conductivity. The cross-linked agent, WPU chains, effectively maintains the rich water content and provides mechanical stickiness to bind two electrodes together. An acid-treated carbon paper (denoted as ACP) combining with such a gel polymer electrolyte demonstrates excellent capacitive behavior with a high areal capacitance of 211.6 mF cm^-2 at 10 mV s^-1. A full cell consisting of ACP/WPU-PAAK-K/ACP displays a low equivalent series resistance of 0.44 Ω from the electrochemical impedance spectroscopic results. An all-solid-state ACP/WPU-PAAK-K/ACP EDLC provides an areal specific capacitance of 94.6 mF cm^-2 at 1 mA cm^-2. This device under 180° bending shows a capacitance retention over 90%, revealing its remarkable flexibility.

Micropatterned Pyramidal Ionic Gels for Sensing Broad-Range Pressures with High Sensitivity

The development of pressure sensors that are effective over a broad range of pressures is crucial for the future development of electronic skin applicable to the detection of a wide pressure range from acoustic wave to dynamic human motion. Here, we present flexible capacitive pressure sensors that incorporate micropatterned pyramidal ionic gels to enable ultrasensitive pressure detection. Our devices show superior pressure-sensing performance, with a broad sensing range from a few pascals up to 50 kPa, with fast response times of <20 ms and a low operating voltage of 0.25 V. Since high-dielectric-constant ionic gels were employed as constituent sensing materials, an unprecedented sensitivity of 41 kPa^-1 in the low-pressure regime of <400 Pa could be realized in the context of a metal-insulator-metal platform. This broad-range capacitive pressure sensor allows for the efficient detection of pressure from a variety of sources, including sound waves, a lightweight object, jugular venous pulses, radial artery pulses, and human finger touch. This platform offers a simple, robust approach to low-cost, scalable device design, enabling practical applications of electronic skin.

Investigation into Pseudo-Capacitance Behavior of Glycoside-Containing Hydrogels

Electrochemical pseudocapacitors are an attractive choice for energy storage applications because they offer higher energy densities than electrostatic or electric double layer capacitors. They also offer higher power densities in shorter durations of time, as compared to batteries. Recent efforts on pseudocapacitors include biocompatible hydrogel electrolytes and transition metal electrodes for implantable energy storage applications. Pseudocapacitive behavior in these devices has been attributed to the redox reactions that occur within the electric double layer, which is formed at the electrode-electrolyte interface. In the present study, we describe a detailed investigation on redox reactions responsible for pseudocapacitive behavior in glycoside-containing hydrogel formulations. Pseudocapacitive behavior was compared among various combinations of biocompatible hydrogel electrolytes, using carbon tape electrodes and transition metal electrodes based on fluorine-doped tin oxide. The hydrogels demonstrated a pseudocapacitive response only in the presence of transition metal electrodes but not in the presence of carbon electrodes. Hydrogels containing amine moieties showed greater energy storage than gels based purely on hydroxyl functional groups. Furthermore, energy storage increased with greater amine content in these hydrogels. We claim that the redox reactions in hydrogels are largely based on Lewis acid-base interactions, facilitated by amine and hydroxyl side groups along the electrolyte chain backbones, as well as hydroxylation of electrode surfaces. Water plays an important role in these reactions, not only in terms of providing ionic radicals but also in assisting ion transport. This understanding of redox reactions will help determine the choice of transition metal electrodes, Lewis acid-base pairs in electrolytes, and medium for ionic transport in future biocompatible pseudocapacitors.

Hydrogel microphones for stealthy underwater listening

Exploring the abundant resources in the ocean requires underwater acoustic detectors with a high-sensitivity reception of low-frequency sound from greater distances and zero reflections. Here we address both challenges by integrating an easily deformable network of metal nanoparticles in a hydrogel matrix for use as a cavity-free microphone. Since metal nanoparticles can be densely implanted as inclusions, and can even be arranged in coherent arrays, this microphone can detect static loads and air breezes from different angles, as well as underwater acoustic signals from 20 Hz to 3 kHz at amplitudes as low as 4 Pa. Unlike dielectric capacitors or cavity-based microphones that respond to stimuli by deforming the device in thickness directions, this hydrogel device responds with a transient modulation of electric double layers, resulting in an extraordinary sensitivity (217 nF kPa(-1) or 24 μC N(-1) at a bias of 1.0 V) without using any signal amplification tools.

Energy transfer cascade in bio-inspired chlorophyll-a/polyacrylamide hydrogel: towards a new class of biomimetic solar cells

Efficient solar energy harvesting in natural photosystem inspired chlorophyll-a/hydrogel based soft, simple system, revealing the effect of coherence-dephasing interpaly.

Printable thin film supercapacitors using single-walled carbon nanotubes

Thin film supercapacitors were fabricated using printable materials to make flexible devices on plastic. The active electrodes were made from sprayed networks of single-walled carbon nanotubes (SWCNTs) serving as both electrodes and charge collectors. Using a printable aqueous gel electrolyte as well as an organic liquid electrolyte, the performances of the devices show very high energy and power densities (6 W h/kg for both electrolytes and 23 and 70 kW/kg for aqueous gel electrolyte and organic electrolyte, respectively) which is comparable to performance in other SWCNT-based supercapacitor devices fabricated using different methods. The results underline the potential of printable thin film supercapacitors. The simplified architecture and the sole use of printable materials may lead to a new class of entirely printable charge storage devices allowing for full integration with the emerging field of printed electronics.

A high-voltage dye-sensitized photocapacitor of a three-electrode system

A high-voltage photo-rechargeable capacitor (photocapacitor) of three-electrode configuration, comprising a dye-sensitized mesoporous TiO2 electrode, two carbon-coated electrodes, and two liquid electrolytes, attained a charge-state voltage of 0.8 V and high energy density per area of 47 microW h cm(-2) which is five times larger than the previous two-electrode photocapacitor.