The AO distal locking aiming device: an evaluation of efficacy and learning curve

Observational prospective unblinded case-control study to evaluate the effect of the Gamma3® distal targeting system for long nails on radiation exposure and time for distal screw placement

PURPOSE

To determine if the DTS decreases radiation exposure (primary outcome measure), fluoroscopy time (secondary outcome measure), and time to distal screw placement (secondary outcome measure) compared to the freehand "perfect circles" method when used for locking of cephalomedullary nails in the treatment of femur fractures METHODS: Fifty-eight patients with hip or femoral shaft fractures that were treated with a long cephalomedullary nail were enrolled in this study. Cohorts were determined based on the method of distal interlocking screw placement into either the "Perfect Circles" or "Distal Targeting" cohort. Time from cephalad screw placement to placement of final distal interlocking screw (seconds), radiation exposure (mGy), and fluoroscopy time (seconds) were compared between groups. Hospital quality measures were compared between cohorts.

RESULTS

Use of the DTS resulted in 77% (4.3x) lower radiation exposure (p < 0.001), 64% (2.7x) lower fluoroscopy time (p < 0.001), and 60% (1.7x) lower intraoperative time from end of cephalad screw placement to end of distal interlocking screw placement (p < 0.001) compared to the freehand "perfect circles" method. There was no difference in 30-day or 90-day complication rates between cohorts.

CONCLUSION

The Stryker Gamma3® Distal Targeting System is a safe, effective and efficient alternative to the freehand "perfect circles" method.

Intramedullary nail holes laser indicator, a non-invasive technique for interlocking of intramedullary nails

Interlocking of intramedullary nails is a challenging procedure in orthopedic trauma surgery. Numerous methods have been described to facilitate this process. But they are exposed patient and surgical team to X-rays or involves trial and error. An accurate and non-invasive method has been provided to easily interlocking intramedullary nails. By transferring a safe visible light inside the nail, a drilling position appears which use to drilling bone toward the nail hole. The wavelength of this light was obtained from ex-vivo spectroscopy on biological tissues which has optimal transmission, reflectance, and absorption properties. Moreover, animal and human experiments were performed to evaluate performance of the proposed system. Ex-vivo performance experiments were performed successfully on two groups of cow and sheep samples. Output parameters were procedure time and drilling quality which there were significant differences between the two groups in procedure time (P < 0.05). But no significant differences were observed in drilling quality (P > 0.05). Moreover, an In-vivo performance experiment was performed successfully on a middle-aged man. To compare the provided method, targeting-arm, and free-hand techniques, two human experiments were performed on a middle-aged and a young man. The results indicate the advantage of the proposed technique in the procedure time (P < 0.05), while the drilling quality is equal to the free-hand technique (P = 0.05). Intramedullary nail holes laser indicator is a safe and accurate method that reduced surgical time and simplifies the process. This new technology makes it easier to interlocking the intramedullary nail which can have good clinical applications.

A New Accurate, Simple and Less Radiation Exposure Device for Distal Locking of Femoral Intramedullary Nails

Background

Due to the metal elasticity of intramedullary nails (IMs) and irregularities of the long bone marrow cavity and other reasons, one of the greatest challenges for surgeons is to position the distal locking screw. Therefore, a novel laser guiding navigation device was designed for the distal locking of femoral IMs. The purpose of this study was to compare the effectiveness of the novel device and freehand technique for distal locking of IMs in the femoral model.

Methods

The laser guiding navigation device (laser group) and freehand technique (freehand group) were used in the distal locking of the IMs in the femoral model. All operations were performed by surgeons of the same level. The differences between the two groups were compared in terms of operative time, radiation exposure time, first success rate, deviation angle between ideal trajectory and actual trajectory, and learning curve.

Results

The distal locking of the IMs in the femoral model was performed 40 times in each group. The results showed that the laser group was better than the freehand group in terms of operative time (345±165 VS 212±105 seconds, t=4.27, P<0.001), radiation exposure time (164±57 VS 41±15 seconds, t=13.15, P<0.001) and first successrate (χ ²=21.36, P<0.001). Compared with the freehand group, the actual trajectory of the laser group was closer to the ideal trajectory in coronal and horizontal planes. Furthermore, the learning curve time of the laser group was shorter.

Conclusion

Compared with traditional freehand technique, the novel laser guiding navigation device can shorten the operative time and reduce radiation exposure invitro. In addition, it is easy to master with more accuracy and a higher first success rate in vitro.

Preliminary Results with the Shape Memory Nail: A Self-contained Distal Locking Mechanism for Diaphyseal Femur Fractures

Distal interlocking of intramedullary nails can be challenging if not done regularly and can be associated with a prolonged operating time and excessive radiation exposure. Multiple techniques have been developed to overcome these problems but all still rely on conventional distal locking methods. Between December 2011 and March 2013, 18 patients with diaphyseal femur fractures were treated with the shape memory nail (Orthofix, Verona, Italy). These nails use self-contained nitinol memory metal ‘wings’ at the distal aspect of the nail to provide rotational and longitudinal stability. We observed fracture union in all 18 cases with no non-unions, rotational malalignments or peri-prosthetic infections. Median theatre time was 35 (18–71) minutes and median total radiation time was 50 (20–209) seconds. The shape memory nail (Orthofix, Verona, Italy) is an attractive alternative to conventional interlocking femoral nails. It provides sufficient stability to allow fracture union while decreasing theater time and limiting radiation exposure.

Pre-planning of intramedullary nailing procedures: A methodology for predicting the position of the distal hole

Inserting the distal locking screws is a challenging step of the intramedullary nailing procedures due to the nail deformation that makes the proximally mounted targeting systems ineffective. A pre-planning methodology is proposed, based on an analytical model of the nail-bone construct, to predict the nail deformation during surgery using orthogonal preoperative radiographs. Each of the femoral shaft and the nail was modeled as a curved tubular Euler-Bernoulli beam. The unknown positions and forces of the nail-bone interaction were found using a systematic trial and error approach, which minimized the total strain energy of the system while satisfying the force and geometrical constraints. The predictions of the model for the nail deformation were compared with the experimental results of five cadaver specimens in 15 test conditions. Relatively large displacements (up to 13 mm) were found for the distal hole in sagittal plane only. The model predictions were in close agreement with the experimental results, with a root mean square error of 1.2 mm. It was concluded that the proposed pre-planning methodology is promising for practical clinical use in intramedullary nailing operations, in order to provide the compensatory information that is required for tuning of proximally mounted targeting systems.

A distal-lock electromagnetic targeting device for intramedullary nailing: Suggestions and clinical experience

PURPOSE

To describe our clinical experience with a system named SureShot? Distal Targeting (Smith & Nephew, Memphis, USA) based on magnetic field presence and discuss our suggestions on this technique.

METHODS

We analysed prospectively 47 patients affected by humeral, tibial or femoral fractures, treated in our institution during a 3-year period of time (August 2010 to September 2013). We considered the following parameters: the time to set up, the time to position a single screw, the effectiveness of the system (drilling ad screwing), the irradiation exposure time during distal locking procedure and surgical complications.

RESULTS

A total number of 96 screws were inserted. The mean preparation time of the device was 5.1 min ± 2 min (range 3-10 min). The mean time for single screw targeting was 5.8 min ± 2.3 min (range 4-18 min). No major complications occurred. Only a few locking procedures were needed to be practiced in order to obtain the required expertise with this targeting device.

CONCLUSION

According to our results, this device is reliable and valid whenever the correct technique is followed. It is also user friendly, exposes to lower radiation and needs less surgical time compared to relative data from the literature. However, the surgeon should always be aware of how to use the free hand technique in case of malfunctioning of the system.

Fluoroscopic freehand and electromagnetic-guided targeting system for distal locking screws of humeral intramedullary nail

PURPOSE

The current techniques used to lock distal screws for the nailing of long bone fractures expose the surgeons, radiologists and patients to a hearty dose of ionizing radiation. The Sureshot™ Distal Targeting System is a new technique that, with the same results, allows for shorter surgery times and, consequently, less exposure to radiation.

MATERIALS AND METHODS

The study was performed on 59 patients (34 males and 25 females) with a simple humerus fracture diagnosis, type 1.2.A according to the AO classification, who were divided into two groups. Group 1 was treated with ante-grade intramedullary nailing with distal locking screws inserted with a freehand technique. Group 2 was treated with the intramedullary nail using the Sureshot™ Distal Targeting System. Two intra-operative time parameters were evaluated in both groups: the time needed for the positioning of the distal locking screws and the time of exposure to ionizing radiations during this procedure.

RESULTS

Group 2 showed a lower average distal locking time compared to group 1 (645.48″ vs. 1023.57″) and also a lower average time of exposure to ionizing radiation than in group 1 (4.35″ vs. 28.96″).

CONCLUSION

The Sureshot™ Distal Targeting System has proven to be equally effective when compared to the traditional techniques, with the added benefits of a significant reduction in both surgical time and risk factors related to the exposure to ionizing radiation for all the operating room staff and the patient.

Complications of Wrist Arthroscopy: A Multicenter Study Based on 10,107 Arthroscopies

Background Wrist arthroscopy is now a routine procedure, regarded as safe. Complications are reported in the literature as being rare and mostly minor. Purpose The two goals of this study were to evaluate the incidence and nature of complications based on a very large multicenter retrospective study, and to investigate about a potential learning curve. Methods The authors sent a detailed questionnaire to all members of the European Wrist Arthroscopy Society (EWAS), inquiring about the number and types of complications encountered during their practice of wrist arthroscopy, and about their experience with the technique. Results A total of 36 series comprising 10,107 wrist arthroscopies were included in the study. There were 605 complications (5.98% of the cases), of which 5.07% were listed as serious and 0.91% as minor. The most frequent ones were failure to achieve the procedure (1.16%), and nerve lesions (1.17%). Cartilage lesions and complex regional pain syndrome each occurred in 0.50% cases. Other complications (wrist stiffness, loose bodies, hematomas, tendon lacerations) were less frequent. Breaking down of the data according to each surgeon's experience of the technique showed a significant relationship with the rate of complications, the threshold for a lower complication rate being approximately 25 arthroscopies a year and/or greater than 5 years of experience. Conclusion Although the global incidence of complications was in keeping with the literature, the incidence of serious complications was much higher than previously reported. There is a significant learning curve with the technique of wrist arthroscopy, both in terms of volume and experience.

Interlocking screws placed with freehand technique and uni-planar image intensification: the "dip-stick" technique

OBJECTIVE

To report our experience with a novel alternative method of freehand interlocking of intramedullary nails. This method requires the use of only anterior-posterior image intensification and an intramedullary guide wire to verify screw placement. Our results are compared with historical results in the literature.

METHODS

A total of 815 patients were treated using this technique from January 2008 to December 2012; 603 patients had fractures of the tibia and 212 had fractures of the femur.

RESULTS

The mean duration of surgery for tibial shaft fractures was 55.6 minutes (range 42-60 minutes) and that for fractures of the femur was 78 minutes (range 50-90 minutes). The mean time for each distal locking was 3.8 minutes (2.5-5.1 minutes), with 7.65 seconds of exposure to radiation during each block.

CONCLUSIONS

The surgical technique is simple, easy and reproducible. Mean time of surgery and radiation exposure was less than that in the literature. A comparative study should be performed.

Distal targeting device for long Gamma nail(®). Monocentric observational study

INTRODUCTION

Intramedullary nail distal locking screws make it possible to control length and rotation but include an increased risk of radiation exposure. A distal targeting device was recently developed for long Gamma(®) nails (Stryker(®)). The aim of this practical observational study was to evaluate the reliability of this system. Our hypothesis was that the targeting device would be systematically used without conversion or complications.

MATERIALS AND METHODS

All of the long Gamma(®) nails implanted between November 2011 and October 2012 were recorded: 91 nails (59W/32M, mean age 73.5years old) for 68 traumatic fractures, 14 preventive nailings and nine pathological fractures. A junior surgeon performed the procedure in 45 cases and a senior in 46 cases. The number of times the device was used, the difficulties and complications encountered, the duration of fluoroscopy and the dose of radiation were noted. Risk factors were looked for.

RESULTS

The targeting device was used 79 times (the surgeon chose not to use it 11 times, and it was not available in one case). There was a measurement error in one case, therefore 78 nails could be evaluated. Three wrong positions of the distal locking screw occurred. No statistically significant risk factors were identified. Distal locking screw corresponded to 18% of the entire procedure at a radiation dose of 7.44% (this was higher with titanium nails and pathological fractures). Total fluoroscopy time was longer with junior than with senior surgeons but the dose and duration for distal locking were not different.

DISCUSSION

The hypothesis was not confirmed. The device was not systematically used and the risk of complications was not null. No risk factors were identified. The distal locking screw is a difficult step but the use of the targeting device can limit the dose of radiation. This device is effective and allows young surgeons to perform distal locking without increasing the dose of radiation compared to senior surgeons.

LEVEL OF EVIDENCE

Level IV, cohort study, observational prospective follow-up.

Does the magnetic-guided intramedullary nailing technique shorten operation time and radiation exposure?

AIM

The aim of this study is to show whether a new magnetic-guided locking technique is superior to a standard freehand technique in terms of operation time and radiation exposure. This treatment will be used for distal locking of the tibia during intramedullary nailing.

METHODS

This randomized trial is done through 80 patients having tibial fractures with a mean age of 25 years (range 16-67 years). In the magnetic locking group, there were 20 fractures of the distal third, 16 of the shaft, and 4 of the proximal tibia; in the freehand group, these numbers were 15, 20, and 5, respectively. The parameters like operation time, distal locking time, radiation exposure duration, and dose were compared.

RESULTS

We placed 100 distal locking screws in the magnetic locking group and 95 in the freehand group. Fluoroscopy was necessary only in the freehand group. All screws were correctly positioned the first time in both groups. The magnetic locking group had a shorter mean surgical time (52 ± 6.2 vs 70 ± 10.9 min; P < 0.01), a shorter mean distal locking time (5 ± 1.1 vs 16 ± 2.0 min; P < 0.01), and a shorter mean placement time for each screw (2 ± 0.5 vs 7 ± 1.2 min; P < 0.01). The magnetic locking group had lower mean radiation exposures (8 ± 4.5 vs 40 ± 7.6 s; P < 0.01) and mean radiation exposure (5.4 ± 2.5 vs 25 ± 6.8 mGy range; P < 0.01).

CONCLUSIONS

For distal locking during tibial intramedullary nailing, the magnetic locking system is as accurate as the standard freehand technique, but it has lower operative times and radiation exposures compared to the standard freehand technique. Therefore, the magnetic locking system should be preferred to current standard freehand techniques.

Radiation-free distal locking of intramedullary nails: evaluation of a new electromagnetic computer-assisted guidance system

Distal locking of intramedullary nails (IMNs) is a difficult part of intramedullary nailing (IMN) that could be time-consuming and expose the surgeon, the surgery personnel and the patient to a considerable amount of radiation as fluoroscopy is usually guiding the procedure. Utilization of electromagnetic fields for that purpose offers an attractive alternative. The SURESHOT™ Distal Targeting System (Smith & Nephew, Inc., Memphis, TN, USA) is a novel commercially available radiation-free aiming system that utilizes computerized electromagnetic field tracking technology for the distal locking of IMNs. In order to evaluate the efficacy of the system we conducted the present study. Nineteen patients (six females-thirteen males, mean age 39.5 years, range 17-85 years) with closed diaphyseal fracture of the femur (eight patients) or the tibia (eleven patients) were treated with IMN using the SURESHOT™ Distal Targeting System for the distal interlocking. All targeting attempts were successful at first try and followed by correct positioning of the screws. Mean time for distal locking of tibial IMNs (two screws) was 219sec (range 200-250sec). Mean time for distal locking of femoral IMNs (two screws) was 249 (range 220-330sec). In the current study the SURESHOT™ Distal Targeting System proved to be accurate, fast and easy to learn.

Is a magnetic-manual targeting device an appealing alternative for distal locking of tibial intramedullary nails?

Background

In order to enable a radiation-free, accurate and simple positioning of distal locking screws, a combined magnetic and manual targeting system has been developed by Sanatmetal®. Where a low-frequency magnetic field is initially used to detect the position of the first drill hole and three more holes can be found with a mechanical template.

Objectives

Our cadaver study was performed to evaluate the accuracy and efficiency of this device.

Materials and Methods

In two runs, 30 probands (group 1: 10 students; group 2: 10 residents; group 3: 10 attendings), none of who being familiar with the device, tested the radiation-free system using 60 intact cadaver tibias. Each proband performed the surgical procedure twice in succession.

Results

Referring to the first attempts, 9.6, 7.2 and 7.1 minutes were the time periods required to insert the four distal screws and the relevant values for the second attempts were 8.6, 6.3 and 6.2 minutes; in both cases revealing a significant difference between group 1 and 2 and group 1 and 3. Furthermore, the mean values within each group indicated a significant decrease of the test duration. Out of the 240 drillings, only one failure (group 1) occurred, representing an accuracy of 99.58 %. Of the probands, 90 % rated the targeting device better than the free-hand technique and 77 % at least attested a high user-friendliness.

Conclusions

Due to our satisfactory test results, the brief training, the steep learning curve and the radiation-free technique the new device has to be considered an appealing alternative for distal locking.

Is proximal femoral nailing a good procedure for teaching in orthogeriatrics?

BACKGROUND

Proximal femoral nailing is a common operation in orthogeriatrics and a highly standardized procedure. For teaching purposes, this operation is often performed by residents and supervised by attending physicians. The objective of this study is to investigate if teaching this operation influences the surgical in-house complication rate.

PATIENTS AND METHODS

All patients who received a proximal femoral Targon PF nail (Aesculap AG, Tuttlingen, Germany) for trochanteric fractures were included in a cohort at our urban academic teaching hospital between 1998 and 2010. To evaluate potential effects of patient age, we separately analyzed several age groups. Complications including wound infection, hematoma, intraoperative malreduction or implant malpositioning causing revision, pain, cut-out and readmission due to nonunion were recorded.

RESULTS

Our collective consists of 1,516 patients (m/f: 410/1,106). The mean age was 78.7 years (range: 19-103 years). The overall complication rate was 7.9 %. In 857 cases operated by attending physicians, the complication rate was 6.9 %. However in the 659 operations performed by residents, we found a higher complication rate of 9.3 %. Further investigating this difference by χ(2) test, we found no significance (p = 0.09). Whilst analyzing the complication rates for the different age groups, we did not find a statistically significant difference except in the age group between 71 and 80 years, for which the odds ratio indicated a 2.6-fold increased complication risk for operations performed by residents (p = 0.01). Further analysis revealed that this increased complication rate was mainly due to increased numbers of cut-out.

CONCLUSION

We conclude that proximal femoral nailing is an operation suitable for teaching purposes. However, patients between 71 and 80 years of age seem to be at an increased risk for cut-out if operated by a resident.

Surgical technique: static intramedullary nailing of the femur and tibia without intraoperative fluoroscopy

BACKGROUND

On a recent mission directed at definitive care for victims of the Haitian earthquake, the orthopaedic team developed a technique for freehand distal locking of femoral and tibial nails without intraoperative fluoroscopy or proximally mounted targeting jigs.

DESCRIPTION OF TECHNIQUE

After performing open antegrade or retrograde nailing by standard techniques, the freehand lock must be obtained before doing standard outrigger locking. This allows the surgeon to control the nail and deliver the locking hole in the nail to a unicortical drill hole in the femur. Before nail insertion, the distance of the desired locking hole is measured from the outrigger in a standard way such that it can be reproduced after the nail is inserted. Through a unicortical drill hole, the nail is palpated with the tip of a Kirschner wire and systematic maneuvers allow the Kirschner wire to palpate and fall into the locking hole. The Kirschner wire is tapped across the second cortex before drilling. The screw is inserted, and the ball-tipped insertion guidewire is placed back into the nail to palpate the crossing screw confirming position.

PATIENTS AND METHODS

We treated 16 patients with 18 long bone fractures using the described technique. We assessed patients clinically and radiographically immediately postoperatively.

RESULTS

A total of 19 blind freehand interlocks were attempted, and 17 were successful as assessed by direct intraoperative observations and by postoperative radiographs.

CONCLUSIONS

We describe a simple technique for performing static locked intramedullary nailing of the femur and tibia without fluoroscopy. This technique was successful in most cases and is intended for use with any nailing system only when fluoroscopy or specialized systems for nailing without fluoroscopy are not available.

Factors influencing neck anteversion during femoral nailing: a retrospective analysis of 220 torsion-difference CTs

BACKGROUND

Rotational malalignment is a well-known complication following intramedullary nailing of femoral shaft fractures. The hypothesis of this study is that various modifiable factors, such as position on the surgical table or nailing technique, influence the incidence of torsional abnormalities.

METHODS

For this retrospective study, we analysed the data of 220 consecutive patients with femoral shaft fractures and postoperative torsion-difference computed tomographies (CTs), performed from 2001 to 2009 in our institution. Mean age of the patients was 33±15 years. Average delay to surgery was 8±11 days. The average postoperative neck anteversion difference between both sides was 11±8°. A p value <0.05 was considered to be statistically significant.

RESULTS

The average postoperative neck anteversion difference between both sides was not significantly affected from the position of the patient on the surgical table (supine or lateral, p=0.698), the delay till surgery (p=0.989), the nailing technique (antegrade or retrograde, p=0.793; reamed or unreamed, p=0.930), the type of the implant (p=0.885) and the experience of the surgeon (p=0.055). Furthermore, the learning curve regarding this complication was long and not predictable.

CONCLUSIONS

We could not identify any risk factors that are associated with an increased incidence of torsional deformities, and thus our hypothesis could not be confirmed. The inability to identify such risk factors renders the prevention of this complication particularly problematic. The invention of new techniques for better intra-operative control of the torsion is probably the only solution to further reduce the incidence of postoperative malrotational deformities.

Are there any advantages in using a distal aiming device for tibial nailing? Comparing the Centro Nailing System with the Unreamed Tibia Nail

INTRODUCTION

The distal locking of an intramedullary tibial nail can be challenging and time consuming when performed freehand. This study was conducted to evaluate if a distal aiming device would reduce surgical time.

MATERIALS AND METHODS

A case-controlled study was performed between 2007 and 2009 with 30 patients receiving a reamed tibial nail (Centronail) with the use of a distal aiming device and 30 patients who were treated with an Unreamed Tibia Nail (UTN), with freehand distal locking, in the same period. The primary outcome in this study was operative time. Secondary outcomes were the need for fluoroscopy, time to consolidation and complications.

RESULTS

Operation time was longer in the Centronail group compared with the UTN group (126 min vs. 96 min, p=0.000). Use of fluoroscopy for distal locking was needed in half of the cases (n=16) using a distal aiming device. No differences were found regarding time to consolidation, time to removal of the nail and complications.

CONCLUSION

The use of an aiming device for distal locking of a tibia nail lengthens operation time rather than reducing it. Fluoroscopy was still needed in about half of the cases. No difference was seen in clinical outcomes. The use of a distal aiming device to lock a tibial nail appears to have no benefit.

Tunnel positioning in anterior cruciate ligament reconstruction: how long is the learning curve?

The purpose of this study is to investigate the effect of the learning curve on radiographic tunnel position. A consecutive series of the first 200 procedures of an orthopaedic surgeon over his initial 4years of independent practice were analysed for tunnel placement, based on radiographic appearance. An arthroscopic-assisted technique using patella tendon as graft material was performed in all cases. To establish femoral tunnels, a transtibial guide pin was used. The graft was secured with bioabsorbable screws. A Frik tunnel view and a strictly lateral radiograph were used to assess tunnel placements. Tunnel positioning was assessed using a computer-aided design, 2D software (Auto CAD2000(®)). To minimize measurement bias, radiographs were assessed three times or until deviations in all three measurements were less than 10%, and the three measurements were then averaged. Sagittal femoral tunnel placement improved significantly (P = 0.01) after the first 100 cases. Significant improvement (P = 0.05) in coronal femoral tunnel placement was observed after the first 75 cases. Significant improvement (P = 0.01) in sagittal tibial tunnel position was observed after the first 100 cases. Mean coronal tibial tunnel did not improve. Critical analysis in this consecutive series suggests that a caseload of approximately 100 procedures were necessary for this surgeon to refine his surgical technique beyond that acquired during formal training.

Learning curves in hip fracture surgery

The aim of this study was to identify and characterise learning curves in hip fracture surgery. Operating times were collected and related to the number of procedures done by residents performing closed reduction and internal fixation using cannulated screws for intracapsular fractures of the hip and cephalomedullary nailing for trochanteric fractures, as well as hemiarthroplasty for displaced intracapsular fractures. The mean operating times decreased significantly for all four procedures studied, though at different rates. For cannulated screws, the mean duration of surgery decreased from 47.8 minutes to 30.1 minutes for procedures 21-25. For cephalomedullary nailing without distal locking, the mean operating time decreased from 73.3 minutes to 36.3 minutes. For cephalomedullary nailing with distal locking, the mean operating time decreased from 81.7 minutes to 56.9 minutes. The mean operating time for hemiarthroplasty decreased from 97.3 minutes to 66.0 minutes. Mean operating times decreased significantly for all procedures studied, though at different rates, indicating a unique learning curve for each procedure.

Reducing radiation exposure in intra-medullary nailing procedures: intra-medullary endo-transilluminating (iMET)

The purpose of the study was to reduce the level of radiation exposure during intra-medullary nailing procedures. A visible light source was inserted into the medullary bone cavity in order to detect the distal interlocking screw holes. The light penetrates out of the bone surface, revealing the position of the screw hole, and this allows the subsequent drilling and placing of the interlocking screw to be free of fluoroscopy. Among the 19 consecutive tibia-fracture patients recruited for this study, no repetition of the drilling procedure or insertion of a transverse interlocking screw was needed. The average time to finish the insertion of one distal interlocking screw was 4.1+/-1.8 min. It was extrapolated that 13-41% of previous radiation exposure levels could be saved. The non-fluoroscopic approach thus decreases the health hazards that the patients are experiencing as well as those of the surgical team who need to perform such intra-medullary nailing operations on a routine basis.

Efficacy of an aiming device for the placement of distal interlocking screws in trochanteric fixation nailing

INTRODUCTION

Locked intramedullary nailing continues to be the surgical treatment of choice for most long bone fractures. Performing distal interlocks can be a technical challenge. Free hand (FH) technique remains to be most popular. Radiation exposure, particularly to the surgeon still remains a concern with this technique.

METHOD

A prospective randomized analysis of 20 patients undergoing operative fixation with long trochanteric fixation nailing for intertrochanteric or subtrochanteric fractures was performed. The groups were randomized into (1) aiming arm group (AA) and (2) FH group by computer generated randomization technique. Two distal interlocking screws were placed in every case. Various parameters were analyzed including total operating time, distal interlocking time, total fluoroscopy time, distal fluoroscopy time and nail dimensions. The variables in two groups were compared to each other using Fischer's exact test.

RESULT

The mean distal interlock time was 7.1 +/- 2.4 and 12.1 +/- 3.2 min for AA and FH techniques respectively. There was a 41.3% decrease in the distal interlock time with the device, which was statistically significant (P < 0.001). The distal interlock fluoroscopy time was 9.2 +/- 4.9 and 28.9 +/- 16.4 s with AA technique and the FH technique respectively. This 68.2% reduction in time taken for distal fluoroscopy was statistically significant (P < 0.001). However, the reduction in the total fluoroscopy time was statistically not significant.

CONCLUSION

The AA is very efficient and user friendly and also reduces the radiation exposure.

Evaluation of the Stryker S2 IM Nail Distal Targeting Device for reduction of radiation exposure: a case series study

Distal locking is one challenging step during intramedullary nailing of femoral shaft fractures that can lead to an increase of radiation exposure. In the present study, the authors describe a technique for the distal locking of femoral nails, implementing a new targeting device in an attempt to reduce radiation exposure and operational time. Over a 2-year period, 127 consecutive cases of femoral shaft fractures were included in the study. All cases were treated with nailing of femoral shaft fractures with an unslotted reamed antegrade femoral nail and distal locking was performed with the use of a proximally mounted aiming device. Mean duration of the procedure was 63.5 18.1 min while the duration for distal locking was 6.6 +/- 2.6 min. In all successful cases, exposure from intraoperative fluoroscopy was 17.2 +/- 7.4 s for the whole operative procedure, and for distal locking was 2 shots, 1.35 s (range, 0.9-2.2 s) and 1.9 mGy (range, 1.1-2.9 mGy). Five cases (3.9%) were unsuccessful, but overall no intraoperative complications were encountered from the application of this technique. The ability of the device to correspond to the level of nail deformation and to properly identify the distal holes, reduced exposure to radiation compared to other published reports, and should be considered as a valuable tool for distal locking of femoral fractures.

Nail over nail technique for distal locking of femoral intramedullary nails

The free hand technique remains the most popular method for distal locking; however, radiation exposure is a major concern. In an endeavour to overcome this concern, distal locking with the nail over nail technique is evaluated. Seventy patients with femoral diaphyseal fractures treated by intramedullary nailing were divided in two groups for distal locking: either using the free hand technique (group I) or with the nail over nail technique (group II). The average number of images taken to achieve nail insertion without locking, for distal locking, and for the complete procedure in group I was 25.8, 24.2, and 50.08, respectively, compared with 24.8, 4.1, and 28.9, respectively, in group II (statistically extremely significant decrease in radiation). The nail over nail technique appears to be a reliable solution for decreasing radiation exposure during closed femoral intramedullary nailing. However, over-reaming of 1.5 mm is the key to the success of the technique.

Targeting device for intramedullary nails: a new high-stable mechanical guide

One of the most demanding steps of an intramedullary nailing is the distal locking. The aim of this study is to evaluate clinically and prospectively a new targeting guide. Twenty-five patients were treated consecutively in two different trauma centres (level one and one general hospital) by two different surgeons who were instructed on using the new device. Reduction of the fracture, intramedullary nailing and proximal locking are performed according to standard procedures. Then the new targeting device is used for distal locking. Evaluations are focused on the time it takes to perform the distal locking, the duration of the irradiation exposure and the duration of the complete procedure. In terms of duration, our results are comparable to those reported in the literature but this new device has more advantages than any other system. This new device is fully mechanical and is solidly linked to the patient. It can be used with any existing radioscopic equipment in any hospital. The guide is manually adjustable out of the X-ray field avoiding the surgeon being irradiated. The procedure is easy to learn and reproducible.

Distal locking of tibial nails : a new device to reduce radiation exposure

The indications for intramedullary nailing have expanded to include most tibial shaft fractures. Nail design has improved since their first introduction, but distal locking remains a difficult part of the procedure, resulting in radiation exposure to the patient and the surgeon and increased operation time. To address these issues, we describe an alternative surgical technique using a newly designed distal targeting device that consists of a proximally mounted aiming arm, and we report the preliminary data from its use in all tibial shaft fractures amenable to surgery for a 2-year period. Sixty-three tibial shaft fractures were treated with this method. The mean duration of the distal locking was 6.5 minutes, and in all successful cases, radiation exposure for distal locking was two shots (one shot before targeting and another for the confirmation of proper screw insertion). Radiation exposure was on average 0.85 seconds (range, 0.4-1.2 seconds) and 1.4 mGy (range, 0.8-1.9 mGy). There were no major intraoperative complications related to the technique. The method has certain advantages and can reduce radiation exposure and operation time. Nonetheless, familiarity with the instrumentation is a prerequisite for accurate distal locking.

LEVEL OF EVIDENCE

Level IV Therapeutic study.

The effectiveness of the external distal aiming device in intramedullary fixation of tibial shaft fractures

INTRODUCTION

Intramedullary nailing has become a popular and effective procedure for the treatment of most fractures of the tibial diaphysis. However, distal interlocking screw placement under fluoroscopic control is responsible for the majority of the radiation exposure and a significant loss of surgical time in the entire nailing procedure. To limit fluoroscopy use, during distal interlocking screw placement, Orthofix has developed a distal targeting device which compensates for the inevitable deformation of the nail in the sagittal plane during its insertion. This prospective clinical study evaluates the efficacy of this distal targeting device for distal locking.

MATERIALS AND METHODS

One hundred and fifteen fresh tibial fractures in the same number of patients with a mean age of 37.5 years (17-85 years) were treated with operative stabilization using the Orthofix tibial nailing system.

RESULTS

The mean duration of the operation was 38 min (20-55 min). A mean of four intra-operative plain X-rays (2-6 X-rays) were used in 103 cases to confirm guide wire placement, final nail insertion and accuracy of screws placement. The mean duration of the use of the image intensifier utilized in the remaining 12 fractures was 5 s (3-8 s). The distal targeting device failed in 12 (5.2%) distal locking screws.

CONCLUSION

This study demonstrates that distal locking can be performed easily and successfully with minimal exposure to radiation, once the surgeon develops a reasonable experience with the use of this distal targeting device.

Literature review of current techniques for the insertion of distal screws into intramedullary locking nails

The procedure for distal interlocking of intramedullary nails can be difficult and time consuming. Following nail insertion, the problems associated with the location of the distal holes and correct screw placements are well known. Numerous techniques and devices have been proposed to aid distal targeting, in attempts to overcome some of the associated problems. The development of the techniques and devices continues. A review of the literature is therefore timely, in order to provide awareness of the current situation. An overview is presented of the various distal targeting methods reported in the literature.

Distal intramedullary nail interlocking: the flag and grid technique

Distal interlocking in intramedullary nailing of long bone fractures accounts for a significant proportion of the total fluoroscopy and operative time. We describe a modification of the "perfect circles" freehand technique employing a metallic grid temporarily attached to the skin of the lateral surface of the femur or to the medial surface of the tibia that acts as a fixed "navigational" aid. The position of the distal nail holes in relation to the grid is fluoroscopically ascertained. Subsequently, under fluoroscopic control, a modified Steinmann pin with a metallic handle attached to its blunt end ("flag") is used to accomplish targeting and to create the screw holes, affording improved visualization. This technique was compared with the traditional freehand technique in 2 groups of patients. Use of the modified technique led to reduction of radiation exposure and total distal interlocking time, and there were no significant complications related to the technique.

Arthroscopic rotator cuff repair: the learning curve

PURPOSE

The purpose of this study was to answer the question: How many cases are required for a surgeon to become proficient in performing arthroscopic rotator cuff repair? We hypothesize that as surgical experienced is gained, learning can be quantitatively shown by a significant decrease in operative time.

TYPE OF STUDY

Prospective case series.

METHODS

Rotator cuff repair time (RCRT) in minutes (as well as other time components comprising total surgical time) was recorded for 100 consecutive patients having arthroscopic rotator cuff repair performed by a single surgeon beginning with his first case in private practice. Mean RCRTs for consecutive blocks of 10 cases were compared. Learning is graphically represented by plotting the RCRT by case number and generating a logarithmic trend curve. A best-fit linear equation (y = mx + b) allows comparison of the initial 10 cases with the subsequent 90 cases, where m , the slope, represents the rate of decrease in RCRT (learning).

RESULTS

Mean RCRT decreased significantly (P < .05) from the first block of 10 cases to the second block of 10 cases. There were no significant changes in mean RCRT when comparing other consecutive blocks of 10 cases. The slope of the line fitting the first block of 10 cases is -8.75; the slope (m) of the line fitting the subsequent 90 cases is -0.23. There is no significant difference in mean RCRT when cases are stratified by tear size.

CONCLUSIONS

Graphic representation of RCRT by case number generates a learning curve whereby learning is quantitatively shown as a significant decrease in operative time as surgical experience is gained.

CLINICAL RELEVANCE

Qualification of the learning curve for arthroscopic rotator cuff repair provides a guide for orthopaedic surgeons contemplating the expected time line for acquiring proficiency in this technique.