Functionality of the dnaA protein binding site in DNA replication is orientation-dependent

Phage Lambda P protein: trans-activation, inhibition phenotypes and their suppression

The initiation of bacteriophage λ replication depends upon interactions between the oriλ DNA site, phage proteins O and P, and E. coli host replication proteins. P exhibits a high affinity for DnaB, the major replicative helicase for unwinding double stranded DNA. The concept of P-lethality relates to the hypothesis that P can sequester DnaB and in turn prevent cellular replication initiation from oriC. Alternatively, it was suggested that P-lethality does not involve an interaction between P and DnaB, but is targeted to DnaA. P-lethality is assessed by examining host cells for transformation by ColE1-type plasmids that can express P, and the absence of transformants is attributed to a lethal effect of P expression. The plasmid we employed enabled conditional expression of P, where under permissive conditions, cells were efficiently transformed. We observed that ColE1 replication and plasmid establishment upon transformation is extremely sensitive to P, and distinguish this effect from P-lethality directed to cells. We show that alleles of dnaB protect the variant cells from P expression. P-dependent cellular filamentation arose in ΔrecA or lexA[Ind^-] cells, defective for SOS induction. Replication propagation and restart could represent additional targets for P interference of E. coli replication, beyond the oriC-dependent initiation step.

Current view on phytoplasma genomes and encoded metabolism

Phytoplasmas are specialised bacteria that are obligate parasites of plant phloem tissue and insects. These bacteria have resisted all attempts of cell-free cultivation. Genome research is of particular importance to analyse the genetic endowment of such bacteria. Here we review the gene content of the four completely sequenced ‘Candidatus Phytoplasma' genomes that include those of ‘Ca. P. asteris' strains OY-M and AY-WB, ‘Ca. P. australiense,' and ‘Ca. P. mali'. These genomes are characterized by chromosome condensation resulting in sizes below 900 kb and a G + C content of less than 28%. Evolutionary adaption of the phytoplasmas to nutrient-rich environments resulted in losses of genetic modules and increased host dependency highlighted by the transport systems and limited metabolic repertoire. On the other hand, duplication and integration events enlarged the chromosomes and contribute to genome instability. Present differences in the content of membrane and secreted proteins reflect the host adaptation in the phytoplasma strains. General differences are obvious between different phylogenetic subgroups. ‘Ca. P. mali' is separated from the other strains by its deviating chromosome organization, the genetic repertoire for recombination and excision repair of nucleotides or the loss of the complete energy-yielding part of the glycolysis. Apart from these differences, comparative analysis exemplified that all four phytoplasmas are likely to encode an alternative pathway to generate pyruvate and ATP.

Molecular characterization of the minimal replicon and the unidirectional theta replication of pSCM201 in extremely halophilic archaea

A 3,463-bp plasmid, pSCM201, was isolated from a halophilic archaeon, Haloarcula sp. strain AS7094. The minimal replicon that is essential and sufficient for autonomous replication and stable maintenance in Haloarcula hispanica was determined by deletion analysis of the plasmid. This minimal replicon ( approximately 1.8 kb) consisted of only two functionally related segments: (i) a putative origin (ori201) containing an AT-rich region and sets of repeats and (ii) an adjacent gene encoding a putative replication initiation protein (Rep201). Electron microscopic observation and Southern blotting analysis demonstrated that pSCM201 replicates via a theta mechanism. Precise mapping of the putative origin suggested that the replication initiated from a fixed site close to the AT-rich region and proceeded unidirectionally toward the downstream rep201 gene, which was further confirmed by electron microscopic analysis of the ClaI-digested replication intermediates. To our knowledge, this is the first unidirectional theta replication plasmid experimentally identified in the domain of archaea. It provides a novel plasmid system to conduct research on archaeal DNA replication.

Replication and control of circular bacterial plasmids

An essential feature of bacterial plasmids is their ability to replicate as autonomous genetic elements in a controlled way within the host. Therefore, they can be used to explore the mechanisms involved in DNA replication and to analyze the different strategies that couple DNA replication to other critical events in the cell cycle. In this review, we focus on replication and its control in circular plasmids. Plasmid replication can be conveniently divided into three stages: initiation, elongation, and termination. The inability of DNA polymerases to initiate de novo replication makes necessary the independent generation of a primer. This is solved, in circular plasmids, by two main strategies: (i) opening of the strands followed by RNA priming (theta and strand displacement replication) or (ii) cleavage of one of the DNA strands to generate a 3'-OH end (rolling-circle replication). Initiation is catalyzed most frequently by one or a few plasmid-encoded initiation proteins that recognize plasmid-specific DNA sequences and determine the point from which replication starts (the origin of replication). In some cases, these proteins also participate directly in the generation of the primer. These initiators can also play the role of pilot proteins that guide the assembly of the host replisome at the plasmid origin. Elongation of plasmid replication is carried out basically by DNA polymerase III holoenzyme (and, in some cases, by DNA polymerase I at an early stage), with the participation of other host proteins that form the replisome. Termination of replication has specific requirements and implications for reinitiation, studies of which have started. The initiation stage plays an additional role: it is the stage at which mechanisms controlling replication operate. The objective of this control is to maintain a fixed concentration of plasmid molecules in a growing bacterial population (duplication of the plasmid pool paced with duplication of the bacterial population). The molecules involved directly in this control can be (i) RNA (antisense RNA), (ii) DNA sequences (iterons), or (iii) antisense RNA and proteins acting in concert. The control elements maintain an average frequency of one plasmid replication per plasmid copy per cell cycle and can "sense" and correct deviations from this average. Most of the current knowledge on plasmid replication and its control is based on the results of analyses performed with pure cultures under steady-state growth conditions. This knowledge sets important parameters needed to understand the maintenance of these genetic elements in mixed populations and under environmental conditions.

The ColE1 unidirectional origin acts as a polar replication fork pausing site

Co-orientation of replication origins is the most common organization found in nature for multimeric plasmids. Streptococcus pyogenes broad-host-range plasmid pSM19035 and Escherichia coli pPI21 are among the exceptions. pPI21, which is a derivative of pSM19035 and pBR322, has two long inverted repeats, each one containing a potentially active ColE1 unidirectional origin. Analysis of pPI21 replication intermediates (RIs) by two-dimensional agarose gel electrophoresis and electron microscopy revealed the accumulation of a specific RI containing a single internal bubble. The data obtained demonstrated that initiation of DNA replication occurred at a single origin in pPI21. Progression of the replicating fork initiated at either of the two potential origins was transiently stalled at the other inversely oriented silent ColE1 origin of the plasmid. The accumulated RIs, containing an internal bubble, occurred as a series of stereoisomers with different numbers of knots in their replicated portion. These observations provide one of the first functional explanations for the disadvantage of head-to-head plasmid multimers with respect to head-to-tail ones.

DnaA-dependent assembly of the ABC primosome at the A site, a single-stranded DNA hairpin containing a dnaA box

The ABC primosome is assembled from DnaA, DnaB and DnaC proteins at a stem-and-loop structure containing a dnaA box within its stem (A site), and catalyses primer RNA synthesis for DNA chain elongation. The DnaA protein can bind to the A site and the A-site-DnaA-protein complex can be isolated by gel-filtration chromatography in the absence of nucleotides. Mutations within the dnaA box completely abolish the binding of DnaA protein. Point mutations within the stem region outside the dnaA box also severely reduce the affinity of DnaA protein for the A site. These results indicate that not only the dnaA box but also other nucleotides and/or secondary structure features of the stem are important for proper recognition of the A site by DnaA protein. The preprimosome, which is able to synthesize RNA primers upon addition of primase, can be isolated by gel-filtration chromatography in the presence of ATP or adenosine 5'-[gamma-thio]triphosphate, a non-hydrolyzable analogue of ATP. The preprimosome can translocate along Escherichia coli single-stranded-DNA-binding protein-coated single-stranded DNA, utilizing the energy released by hydrolysis of ATP, as indicated by its helicase activity. dATP, as well as dCTP, can support the helicase activity of the preprimosome to some extent, while they are inert in helicase assays with DnaB protein in the absence of E. coli single-stranded DNA-binding protein. In keeping with this result, the isolated preprimosome, which appears to contain DnaA and DnaB proteins, is capable of hydrolyzing dATP as well as ATP and GTP. In a reconstituted replication assay, addition of excess dATP restores replication activities which have been inhibited by addition of adenosine 5'-[gamma-thio]triphosphate. The ability of dATP to support helicase and replicative activities of the ABC primosome indicates that the formation of the complex somehow modulates the structures of its component(s) so that they can utilize otherwise inert nucleotides. On the basis of these results, a scheme for the assembly of the ABC primosome at the A site is presented.

Mutations in Escherichia coli dnaA which suppress a dnaX(Ts) polymerization mutation and are dominant when located in the chromosomal allele and recessive on plasmids

Extragenic suppressor mutations which had the ability to suppress a dnaX2016(Ts) DNA polymerization defect and which concomitantly caused cold sensitivity have been characterized within the dnaA initiation gene. When these alleles (designated Cs, Sx) were moved into dnaX+ strains, the new mutants became cold sensitive and phenotypically were initiation defective at 20 degrees C (J.R. Walker, J.A. Ramsey, and W.G. Haldenwang, Proc. Natl. Acad. Sci. USA 79:3340-3344, 1982). Detailed localization by marker rescue and DNA sequencing are reported here. One mutation changed codon 213 from Ala to Asp, the second changed Arg-432 to Leu, and the third changed codon 435 from Thr to Lys. It is striking that two of the three spontaneous mutations occurred in codons 432 and 435; these codons are within a very highly conserved, 12-residue region (K. Skarstad and E. Boye, Biochim. Biophys. Acta 1217:111-130, 1994; W. Messer and C. Weigel, submitted for publication) which must be critical for one of the DnaA activities. The dominance of wild-type and mutant alleles in both initiation and suppression activities was studied. First, in initiation function, the wild-type allele was dominant over the Cs, Sx alleles, and this dominance was independent of location. That is, the dnaA+ allele restored growth to dnaA (Cs, Sx) strains at 20 degrees C independently of which allele was present on the plasmid. The dnaA (Cs, Sx) alleles provided initiator function at 39 degrees C and were dominant in a dnaA(Ts) host at that temperature. On the other hand, suppression was dominant when the suppressor allele was chromosomal but recessive when it was plasmid borne. Furthermore, suppression was not observed when the suppressor allele was present on a plasmid and the chromosomal dnaA was a null allele. These data suggest that the suppressor allele must be integrated into the chromosome, perhaps at the normal dnaA location. Suppression by dnaA (Cs, Sx) did not require initiation at oriC; it was observed in strains deleted of oriC and which initiated at an integrated plasmid origin.

The solution conformation of a trisdecanucleotide containing the consensus binding site of the dnaA initiation protein

The solution structure of a trisdecanucleotide, d(CCTGTGGATAACA).d(TGTTATCCACAGG) containing the consensus binding site of the dnaA initiation protein has been determined by two-dimensional NMR techniques and restrained molecular dynamics calculations. Interproton distances were obtained by an iterative complete relaxation matrix algorithm, MARDIGRAS. During molecular dynamics runs, the backbone was restricted with the assistance of experimentally derived distance constraints. A family of refined structures with small pairwise root-mean-square deviation values (approximately 0.08 nm) was obtained. All but one of the pyrimidines were found to adopt the C1'-exo conformation while the purines were found to adopt the C2'-endo or C1'-exo conformation. The six-membered rings of the purines were found to stack over the six-membered rings of the pyrimidines while there is virtually no overlap of the pyrimidines over the purines. 5'-purine-purine-3' and 5'-pyrimidine-pyrimidine-3' stacking resembles the observed stacking of these bases in other NMR and X-ray structures of oligonucleotides. The final refined structure exhibited a small curvature and was slightly longer than canonical B-DNA. The variation of twist angle, proposed as a recognition element for proteins, exhibited symmetry about the centre of the consensus binding site.

Binding of DnaA protein to a replication enhancer counteracts the inhibition of plasmid R6K gamma origin replication mediated by elevated levels of R6K pi protein

Replication of the gamma origin of Escherichia coli plasmid R6K requires pi protein, encoded by the R6K pir gene, and many host factors, including DnaA protein. Pi has dual roles, activating replication at low levels and inhibiting replication at high levels. The inhibitory function of pi is counteracted by integration host factor and a specific sequence of the origin called the enhancer. This 106-bp DNA segment contains a binding site for DnaA protein (DnaA box 1). In this study, we mutated this site to determine if it was required for the enhancer's function. Using gamma origin derivative plasmids with the DnaA box 1 altered or deleted, we show that this site is necessary to protect the origin against levels of wild-type pi protein that would otherwise inhibit replication. To show that the base substitutions in DnaA box 1 weakened the binding of DnaA, we developed a new application of the agarose gel retardation assay. This quick and easy assay has broad applicability, as shown in binding studies with DNA fragments carrying a different segment of the R6K origin, the chromosomal origin (oriC), or the pUC origin. The gel retardation assay suggests a stoichiometry of DnaA binding different from that deduced from other assays.

DnaA protein/DNA interaction. Modulation of the recognition sequence

In the active orientation the DnaA protein/dnaA box complex blocks transcribing RNA polymerase. The extent of transcription termination at different dnaA boxes was used to determine in vivo their various affinities to the DnaA protein. The rate of transcription distal to the respective dnaA box was monitored by the expression of the reporter gene galK. The dnaA boxes (5'-TTATACACA and 5'-TTATCCAAA), present in oriC, showed the strongest binding affinity. The dnaA box 5'-TTTTCCACA was mutated at eight positions such that the boxes differed from the consensus sequence, 5'-TT(A/T)T(A/C)CA(A/C)A, defined so far. Based on the different properties of the dnaA boxes, a new consensus sequence was derived: 5'-(T/C)(T/C)(A/T/C)T(A/C)C(A/G)(A/C/T(A/C).

Replication of plasmids in gram-negative bacteria

Replication of plasmid deoxyribonucleic acid (DNA) is dependent on three stages: initiation, elongation, and termination. The first stage, initiation, depends on plasmid-encoded properties such as the replication origin and, in most cases, the replication initiation protein (Rep protein). In recent years the understanding of initiation and regulation of plasmid replication in Escherichia coli has increased considerably, but it is only for the ColE1-type plasmids that significant biochemical data about the initial priming reaction of DNA synthesis exist. Detailed models have been developed for the initiation and regulation of ColE1 replication. For other plasmids, such as pSC101, some hypotheses for priming mechanisms and replication initiation are presented. These hypotheses are based on experimental evidence and speculative comparisons with other systems, e.g., the chromosomal origin of E. coli. In most cases, knowledge concerning plasmid replication is limited to regulation mechanisms. These mechanisms coordinate plasmid replication to the host cell cycle, and they also seem to determine the host range of a plasmid. Most plasmids studied exhibit a narrow host range, limited to E. coli and related bacteria. In contrast, some others, such as the IncP plasmid RK2 and the IncQ plasmid RSF1010, are able to replicate in nearly all gram-negative bacteria. This broad host range may depend on the correct expression of the essential rep genes, which may be mediated by a complex regulatory mechanism (RK2) or by the use of different promoters (RSF1010). Alternatively or additionally, owing to the structure of their origin and/or to different forms of their replication initiation proteins, broad-host-range plasmids may adapt better to the host enzymes that participate in initiation. Furthermore, a broad host range can result when replication initiation is independent of host proteins, as is found in the priming reaction of RSF1010.

Functions of the DnaA protein of Escherichia coli in replication and transcription

The function of DnaA protein as a replisome organizer in the initiation of DNA replication is reviewed. A model is presented showing the construction of two basic types of DnaA-dependent replication origin. New data demonstrate that the dnaA box-DnaA protein complex is a transcription terminator. Only one orientation of the dnaA box results in termination of transcription. Mutation of the dnaA box within the dnaA reading frame shows that DnaA-mediated transcription termination has a role in the autoregulation of the dnaA gene.