Analytical magnetapheresis of magnetically susceptible particles

Integrating the QCM detection with magnetic separation for on-line analysis

We investigate the feasibility of coupling the quartz crystal microbalance (QCM) with magnetic separation for on-line analysis. A flow cell was integrated with QCM and magnetic force for the analysis of magnetic and nonmagnetic samples. The resonant frequency change ((Delta)f) of QCM was related to the amount of deposited magnetic nanoparticles. This experiment demonstrates that QCM can be used as an on-line detector for magnetic separation. The QCM also gives a characteristic response of the binding between the streptavidin and biotin labeled on the magnetic nanoparticles. Biotin-labeled magnetic nanoparticles were flowed through a gold electrode of QCM to deposit as a matrix for selective capturing streptavidin. The resonant frequency change of QCM was proportional to the amounts of streptavidin captured by biotin. This technique can provide a simple, economic, and automatic method for on-line detection of biomarkers.

Separation method based on affinity reaction between magnetic and nonmagnetic particles for the analysis of particles and biomolecules

A separation method is reported for particle and biochemical analysis based on affinity interactions between particle surfaces under magnetic field. In this method, magnetic particles with immunoglobulin G (IgG) or streptavidin on the surface are flowed through a separation channel to form a deposition matrix for selectively capturing nonmagnetic analytes with protein A or biotin on the surface due to specific antigen (Ag)--antibody (Ab) interactions. This separation method was demonstrated using model reactions of IgG--protein A and streptavidin-biotin on particle surface. The features of this new separation method are (1) the deposited Ag-Ab complex can be examined and further analyzed under the microscope, (2) a kinetic study of complex binding is possible, and (3) the predeposited matrix can be formed selectively and changed easily. The detection limits were about 10(-11) g. The running time was less than 10 min. The selectivities of studied particles were 94% higher than those of label-controlled particles. This method extends the applications of analytical magnetapheresis to nonmagnetic particles. Preliminary study shows that this separation method has a great potential to provide a simple, fast, and selective analysis for particles, blood cells, and immunoassay related applications.

New method of blood typing using analytical magnetapheresis

We report a new method of blood typing based on the agglutination of red blood cell (RBC) with serum-treated magnetic particles in analytical magnetapheresis. Blood typing of ABO was demonstrated. The agglutination patterns of RBCs are different for different blood types and can be used to determine the ABO blood typing in analytical magnetapheresis. Six samples can be tested in each run. The running time was less than 10 min. Magnetic particles were prepared in the laboratory. The amount of RBCs needed for the agglutination test was about 1.0 microl of adult blood. The blood typing of ABO was used to illustrate the capable applications of analytical magnetapheresis to nonmagnetic samples like cells without magnetic labels. Analytical magnetapheresis has a great potential for cell related analysis.

Determination of magnetic susceptibility of various ion-labeled red blood cells by means of analytical magnetapheresis

Analytical magnetapheresis is a newly developed technique for separating magnetically susceptible particles. The magnetically susceptible particles are deposited on a bottom plate after flowing through a thin (< 0.05 cm) separation channel under a magnetic field applied perpendicular to the flow. Particles with various magnetic susceptibilities can be selectively deposited and separated by adjusting the applying magnetic force and flow rates. Magnetic susceptibility is an important parameter for magnetic separation. Magnetic susceptibility determination of various ion-labeled red blood cells (RBCs) using analytical magnetapheresis with a simple theoretical treatment is reported in this study. Susceptibility determination is based on the balance between maximal channel flow rate and magnetically induced flow rate for deposition. We tried a new approach to determine particle magnetic susceptibilities using a balance of magnetic and drag forces to control magnetically induced particle velocities. The Er3+, Fe3+, Cu2+, Mn2+, Co2+, and Ni2+ ions were used to label RBC at various labeling concentrations for susceptibility determination. The susceptibilities determined for various ion-labeled RBC under two magnetic field intensities fell within a 10% range. The average viabilities of various ion-labeled RBCs were 96.1 +/- 0.8%. The susceptibility determination generally took less than 10 min. Determined susceptibilities from analytical magnetapheresis differed by 10% from reference measurements using a superconducting quantum interference device (SQUID) magnetometer. The cost and time for analysis is much less using analytical magnetapheresis. This technique can provide a simple, fast, and economical way for particle susceptibility determinations.

High-magnetic-field electromagnetophoresis of micro-particles in a capillary flow system

The electromagnetophoretic migration of micro-particles in a capillary flow system was demonstrated using a homogeneous magnetic field applied at right angles to an electric current. We utilized a high-magnetic-field of 10 T for observing this phenomenon. When the direction of the electric current was alternatively changed, polystyrene latex particles in a flowing aqueous medium migrated zigzag affected by a Lorentz force exerted on the medium. Carbon particles also migrated in the same manner with polystyrene particles. Further, we tried the electromagnetophoretic migration of biological particles, such as yeasts and human red blood cells. The migration velocity component perpendicular to the flow was proportional to both the electric current and the magnetic flux density. These results proved that the dominant force of the zigzag migration was an electromagnetophoretic buoyancy generated in the flowing medium. Moreover, it was found that the force exerted on the particles in the magnetic field of 10 T was sufficient for the desorption of particles adsorbed on the capillary wall.