Moderation of the electroosmotic flow in capillary electrophoresis by chemical modification of the capillary surface with tentacle-like oligourethanes

Electrophoretic separation of neurotransmitters on a polystyrene nano-sphere∕polystyrene sulphonate coated poly(dimethylsiloxane) microchannel

In this paper, a poly(dimethylsiloxane) microchip with amperometric detector was developed for the electrophoretic separation and determination of neurotransmitters. For increasing the separation efficiency, the microchannel is modified by polystyrene sulphonate∕polystyrene nano-sphere self-assembly coating. A stable electro-osmotic flow (EOF) and higher separation efficiency are obtained in proposed modified microchannel. Under optimized conditions, dopamine, epinephrine, catechol, and serotonin are acceptably baseline separated in this 3.5 cm length separation channel with the theoretical plate number from 4.6 × 10(4) to 2.1 × 10(5) per meter and resolution from 1.29 to 12.5. The practicability of proposed microchip is validated by the recovery test with cerebrospinal fluid as real sample which resulted from 91.7% to 106.5%.

Microfluidic flow control on charged phospholipid polymer interface

A type of charged phospholipid polymer biointerface was constructed on a quartz microfluidic chip to control the electroosmotic flow (EOF) and to suppress non-specific protein adsorption through one-step modification. A negatively charged phospholipid copolymer containing 2-methacryloyloxyethyl phosphorylcholine (MPC), n-butyl methacrylate (BMA), potassium 3-methacryloyloxypropyl sulfonate (PMPS) and 3-methacryloxypropyl trimethoxysilane (MPTMSi) moieties (referred to as PMBSSi) was synthesized to introduce such phosphorylcholine segments as well as surface charges onto the silica-based microchannels via chemical bonding. At neutral pH, the homogenous microchannel surface modified with 0.3 wt% PMBSSi in alcoholic solution, retained a significant cathodic EOF ((1.0 +/- 0.1) x 10(-4) cm(2) V(-1) s(-1)) with approximately one-half of the EOF of the unmodified microchannel ((1.9 +/- 0.1) x 10(-4) cm(2) V(-1) s(-1)). Along with another non-charged copolymer (poly(MPC-co-MPTMSi), PMSi), the regulation of the surface charge density can be realized by adjusting the concentration of PMBSSi or PMSi initial solutions for modification. Coincidently, the zeta-potential and the EOF mobility at neutral pH showed a monotonically descending trend with the decrease in the charge densities on the surfaces. This provides a simple but feasible approach to controlling the EOF, especially with regard to satisfying the requisites of miniaturized systems for biological applications requiring neutral buffer conditions. In addition, the EOF in microchannels modified with PMBSSi and PMSi could maintain stability for a long time at neutral pH. In contrast to the EOF in the unmodified microchannel, the EOF in the modified microchannel was only slightly affected by the change in pH (from 1 to 10). Most importantly, although PMBSSi possesses negative charges, the non-specific adsorptions of both anionic and cationic proteins (considering albumin and cytochrome c, respectively, as examples) were effectively suppressed to a level of 0.15 microg cm(-2) and lesser in the case of the 0.3 wt% PMBSSi modification. Consequently, the variation in the EOF mobility resulting from the protein adsorption was also suppressed simultaneously. To facilitate easy EOF control with compatibility to biomolecules delivered in the microfluidic devices, the charged interface described could provide a promising option.

Co-electroosmotic capillary electrophoresis determination of phenolic acids in commercial olive oil

Fourteen phenolic acids have been selectively determined in olive-oil samples using the co-electrosmotic capillary electrophoresis mode with UV detection after the LLE extraction system. A polycationic surfactant (hexadimetrine bromide, HDB), which dynamically coats the inner surface of the capillary and causes a fast anodic electroosmotic flow, was added to the electrolyte. The main factors affecting co-electroosmotic flow (EOF) such as type of modifier, concentration, and influence of organic solvents have been studied. Other parameters such as pH, type, and concentration of buffer, applied voltage, and injection time were also optimised using hydrodynamic injection for 8 s and UV detection at 210 nm. The composition optimum of the running buffer used was a 20% 2-propanol, 0.001% HDB, and 50 mM sodium borate at a pH value of 9.6. The method has been applied to determination and quantification of fourteen phenolic acids at ppb levels in olive oil samples after a liquid-liquid extraction.

Approach to quasi stationary electrokinetic chromatography

A partial filling (PF) electrokinetic chromatography (EKC) system in combination with the application of weak counter pressures was built up by the combination of an UV-active polymeric dye, Poly R-478, used as additive in the separation buffer (SB) zone and an UV-permeable borate background buffer (BB). The electroosmotic flows of the buffers were equalized by matching their ionic strengths to achieve best efficiency. The influence of the pressure for the injection of the separation buffer and the effect of the counter pressure on the breakthrough of the separation buffer zone was investigated. The quasi stationary state of the separation buffer zone was evaluated by recording breakthrough curves. Based on these data the counter pressure was manipulated so that the separation buffer zone became quasi stationary and a large interference-free migration time window results. The system was optimized using a mixture of amino/nitroaromatics as test compounds.

(Micellar) electrokinetic chromatography: an interesting solution for the liquid phase separation dilemma

High-performance liquid chromatography (HPLC) is a well-established method in modern analysis. The method is simple, very robust and is applicable to the majority of components to be analyzed in contrast to gas chromatography. Low efficiency and small peak capacity are sore points of HPLC when complex mixtures have to be separated. The reason for this dilemma is the small diffusion coefficient of the analytes in the liquid mobile phase compared to a gaseous phase. This review, complemented by exemplary calculated data and some latest results of our own research, illustrates the dilemma of liquid phase chromatography to achieve high efficiencies under reasonable conditions. It is shown that (micellar) electrokinetic chromatography, offering fast and efficient separations, is a very promising solution for this dilemma. Additional features of this method are possibilities of on-line analyte concentration, coupling to mass spectrometry and the easy change of selectivities by applying various separation additives. The pros and cons of electrokinetic chromatography are pointed out and some application examples are given.

Improvement of the long-term stability of polyimide-coated fused-silica capillaries used in capillary electrophoresis and capillary electrochromatography

Swelling of the polyimide coating of fused-silica capillaries in acetonitrile-containing buffers was found to be the reason for several problems in capillary electrophoresis (CE) and capillary electrochromatography (CEC). Scanning electron microscopy photographs of the ends of raw fused-silica tubing showed that the coating becomes soft and increases its volume after longer contact with such buffers. As a consequence, separation efficiency can deteriorate, the capillary ends can clog or break off. To prevent swelling of the polyimide coating, fused-silica capillaries used in CE or CEC were heated at 300 degrees C for a longer period of time which improved their long-term stability in comparison to raw fused-silica tubing.

Cycloaliphatic epoxy resin coating for capillary electrophoresis

Coating the interior surface of a fused-silica capillary with a polymeric material has long been used in capillary electrophoresis (CE) to reduce or eliminate electroosmotic flow and suppress adsorption. A cycloaliphatic epoxide-based resin was bonded to silane treated capillaries and crosslinked with a curing agent. The epoxy resin coating significantly reduced electroosmotic flow over a pH range of 3-10. This coating was sufficiently hydrophilic to suppress protein adsorption. The epoxy resin coated capillary was used to separate several acidic and basic proteins and peptides. Separation efficiencies greater than 400,000 theoretical plates were achieved. The relative standard deviations in migration times for proteins were <0.8%. Speed and simplicity are important advantages of the coating procedure compared to other published coating methods.

Migration of (hydroxy)carboxylic acids in coelectroosmotic capillary electrophoresis. Influence of the electrolyte composition

This work focused on the way several electrolyte components could affect the electroosmotic flow and the capillary electrophoretic migration of aliphatic or aromatic (hydroxy)carboxylic acids. The effects exerted by the electroosmotic flow modifier, hexadecyltrimethylammonium bromide, the addition of metal salt to the electrolyte and the absorbance provider (chromophore) used for indirect detection were investigated. A retention of the organic acids was demonstrated. Its magnitude was shown to depend on the amount of cationic surfactant adsorbed onto the capillary walls. The addition of sodium nitrate led to a remobilization of all the acids except glycolic acid. Moreover, the presence of the chromophore was shown to influence mainly the migration of the glycolic acid.

Capillary electrophoresis of proteins 1999-2001

This review article with 223 references describes recent developments in capillary electrophoresis (CE) of proteins and covers papers published during last two years, from the previous review (V. Dolnik, Electrophoresis 1999, 20, 3106-3115) through Spring 2001. It describes the topics related to CE of proteins including modeling of the electrophoretic properties of proteins, sample pretreatment, wall coatings, improving selectivity, detection, special electrophoretic techniques, and applications.

Recent developments in chiral capillary electrophoresis and applications of this technique to pharmaceutical and biomedical analysis

This paper provides an overview of the current status of chiral capillary electrophoresis (CE). The emphasis is placed on the application of CE in chiral separation of various racemic compounds. During the last two years about 280 papers, several review articles, and two entire issues, edited by S. Fanali (Electrophoresis 1999, 20, 2577-2798, and H. Nishi and S. Terabe (J. Chromatogr. A 2000, 879, 1-471.) have been devoted to chiral CE. Enantiomeric separations of various compounds, e.g., pharmaceuticals, drug candidates, drugs and related metabolites in biological fluids, amino acids, di- and tri peptides, pesticides and fungicides, have been performed using different chiral selectors. Native and derivatized cyclodextrins continue to be the most widely used chiral selectors. Other chiral selectors such as natural and synthetic chiral micelles, crown ethers, chiral ligands, proteins, oligo- and polysaccharides, and macrocyclic antibiotics have also been applied to chiral CE separations.