Development of simultaneous purification methodology for multiple synthetic peptides by reversed-phase sample displacement chromatography

Sample displacement chromatography of monoclonal antibody charge variants and aggregates

The rise of biosimilar monoclonal antibodies has renewed the interest in monoclonal antibody (mAb) charge variants composition and separation. The sample displacement chromatography (SDC) has the potential to overcome the low separation efficiency and productivity associated with bind-elute separation of mAb charge variants. SDC in combination with weak cation exchanging macroporous monolithic chromatographic column was successfully implemented for a separation of charge variants and aggregates of monoclonal IgG under overloading conditions. The charge variants composition was at-line monitored by a newly developed, simple and fast analytical method, based on weak cation exchange chromatography. It was proven that basic charge variants acted as displacers of IgG molecules with lower pI, when the loading was performed 1 to 1.5 pH unit below the pI of acidic charge variants. The efficiency of the SDC process is flow rate independent due to a convection-based mass transfer on the macroporous monolith. The productivity of the process at optimal conditions is 35 mg of purified IgG fraction per milliliters of monolithic support with 75-80% recovery. As such, an SDC approach surpasses the standard bind-elute separation in the productivity for a factor of 3, when performed on the same column. The applicability of the SDC approach was confirmed for porous particle-based column as well, but with 1.5 lower productivity compared to the monoliths.

Separation of proteins from human plasma by sample displacement chromatography in hydrophobic interaction mode

Sample displacement chromatography (SDC) in reversed-phase and ion-exchange modes was introduced approximately 20 years ago. This method was first used for the preparative purification of peptides and proteins. Recently, SDC in ion-exchange mode was also successfully used for enrichment of low-abundance proteins from human plasma. In this paper, the use of SDC for the separation of plasma proteins in hydrophobic interaction mode is demonstrated. By use of two or more columns coupled in series during sample application, and subsequent elution of detached columns in parallel, additional separation of bound proteins was achieved. Further low-abundance, physiologically active proteins could be highly enriched and detected by ESI-MS/MS.

Sample displacement chromatography as a method for purification of proteins and peptides from complex mixtures

Sample displacement chromatography (SDC) in reversed-phase and ion-exchange modes was introduced approximately twenty years ago. This method takes advantage of relative binding affinities of components in a sample mixture. During loading, there is a competition among different sample components for the sorption on the surface of the stationary phase. SDC was first used for the preparative purification of proteins. Later, it was demonstrated that this kind of chromatography can also be performed in ion-exchange, affinity and hydrophobic-interaction mode. It has also been shown that SDC can be performed on monoliths and membrane-based supports in both analytical and preparative scale. Recently, SDC in ion-exchange and hydrophobic interaction mode was also employed successfully for the removal of trace proteins from monoclonal antibody preparations and for the enrichment of low abundance proteins from human plasma. In this review, the principals of SDC are introduced, and the potential for separation of proteins and peptides in micro-analytical, analytical and preparative scale is discussed.

Selectivity of monolithic supports under overloading conditions and their use for separation of human plasma and isolation of low abundance proteins

Human serum albumin (HSA) and immunoglobulin G (IgG) represent over 75% of all proteins present in human plasma. These two proteins frequently interfere with detection, determination and purification of low abundance proteins that can be potential biomarkers and biomarker candidates for various diseases. Some low abundance plasma proteins such as clotting factors and inhibitors are also important therapeutic agents. In this paper, the characterization of ion-exchange monolithic supports under overloading conditions was performed by use of sample displacement chromatography (SDC). If these supports were used for separation of human plasma, the composition of bound and eluted proteins in both anion- and cation-exchange mode is dependent on column loading. Under overloading conditions, the weakly bound proteins such as HSA in anion-exchange and IgG in cation-exchange mode are displaced by stronger binding proteins, and this phenomenon was not dependent on column size. Consequently, small monolithic columns with a column volume of 100 and 200 μL are ideal supports for high-throughput screening in order to develop new methods for separation of complex mixtures, and for sample preparation in proteomic technology.

HPLC analysis and purification of peptides

High-performance liquid chromatography (HPLC) has proved extremely versatile over the past 25 yr for the isolation and purification of peptides varying widely in their sources, quantity and complexity. This article covers the major modes of HPLC utilized for peptides (size-exclusion, ion-exchange, and reversed-phase), as well as demonstrating the potential of a novel mixed-mode hydrophilic interaction/cation-exchange approach developed in this laboratory. In addition to the value of these HPLC modes for peptide separations, the value of various HPLC techniques for structural characterization of peptides and proteins will be addressed, e.g., assessment of oligomerization state of peptides/proteins by size-exclusion chromatography and monitoring the hydrophilicity/hydrophobicity of amphipathic alpha-helical peptides, a vital precursor for the development of novel antimicrobial peptides. The value of capillary electrophoresis for peptide separations is also demonstrated. Preparative reversed-phase chromatography purification protocols for sample loads of up to 200 mg on analytical columns and instrumentation are introduced for both peptides and recombinant proteins.

Preparative reversed-phase high-performance liquid chromatography collection efficiency for an antimicrobial peptide on columns of varying diameters (1mm to 9.4mm I.D.)

The present study examines the effect of reversed-phase high-performance liquid chromatography (RP-HPLC) column diameter (1mm to 9.4mm I.D.) on the one-step slow gradient preparative purification of a 26-residue synthetic antimicrobial peptide. When taken together, the semi-preparative column (9.4mm I.D.) provided the highest yields of purified product (an average of 90.7% recovery from hydrophilic and hydrophobic impurities) over a wide range of sample load (0.75-200mg). Columns with smaller diameters, such as narrowbore columns (150x2.1mm I.D.) and microbore columns (150x1.0mm I.D.), can be employed to purify peptides with reasonable recovery of purified product but the range of the crude peptide that can be applied to the column is limited. In addition, the smaller diameter columns require more extensive fraction analysis to locate the fractions of pure product than the larger diameter column with the same load. Our results show the excellent potential of the one-step slow gradient preparative protocol as a universal method for purification of synthetic peptides.

One-step purification of a recombinant protein from a whole cell extract by reversed-phase high-performance liquid chromatography

We have developed a one-step facile, flexible and readily scalable purification method for a recombinant protein, TM 1-99 (113 amino acid residues; 12,837 Da) based on reversed-phase high-performance liquid chromatography (RP-HPLC) from an E. coli cell lysate. Following cell lysis, the cell contents were extracted with 0.1% aqueous trifluoroacetic acid (TFA), applied directly under conditions of high sample load to a narrow bore RP-HPLC C(8) column (150 mm x 2.1 mm I.D.) and eluted by a shallow gradient of acetonitrile (0.1%/min). Loads of 23 and 48 mg of lyophilized crude cell extract produced 2.4 and 4.2mg of purified product (>94% pure), respectively, at >94% recovery. Our results show the excellent potential of one-step RP-HPLC for purification of recombinant proteins from cell lysates, where high yields of purified product and greater purity are achieved compared to affinity chromatography. Such an approach was also successful in purifying just trace levels (<0.1% of total contents of crude sample) of TM 1-99 from a cell lysate.

Sample displacement chromatography of Atlantic Salmon (Salmo salar) thrombin

A modified method of sample displacement chromatography (SDC) was used to purify active salmon thrombin on a heparin-coupled matrix to near homogeneity in milligram amounts from 117 ml plasma. This was achieved by combining a low-pressure multi-column affinity chromatography system with non-homogenous sample application in the order of increasing affinity to Heparin Sepharose. The results suggest that this modified method could be useful in protein purification. Some characteristics of salmon thrombin are presented.

Affinity chromatography techniques based on the immobilisation of peptides exhibiting specific binding activity

Affinity chromatography is one of the powerful techniques in selective purification and isolation of a great number of compounds. New challenges in scientific research, such as high-throughput systems, isolation procedures that allow to obtain a single substance from a complex matrix in high degree of purity, low costs and wide availability, have led to the discovery of new tailor-made synthetic recognition systems. In this review the design, synthesis, purification and characterisation of peptides with recognition properties are discussed. Applications of peptide ligands are described and analytical tools mentioned.

Preparative reversed-phase liquid chromatography of proteins from rabbit skeletal troponin, a multi-protein complex

A reversed-phase high-performance liquid chromatography protocol for purification of all proteins in a multi-protein (TnI, TnC, TnT, tropomyosin) complex from rabbit skeletal muscle has been developed, enabling efficient purification of sample amounts ranging from 43 mg of protein complex on a standard analytical column, to 1400 mg on a column of 21.2 mm I.D. and finally, to 5700 mg on a column of 50 mm I.D. Due to problems associated with scale-up procedures for these proteins (e.g. aggregation and/or solubility issues), an initial sample fractionation was devised whereby 50% of the TnC component was precipitated with acetonitrile prior to sample introduction on the RPLC column. By subsequently taking advantage of sample overload conditions to enhance the displacement effect between sample components, coupled with very slow gradient conditions (0.1% acetonitrile/min), we were able to achieve excellent protein separations at high yields of purified proteins.

Preparative reversed-phase liquid chromatography of peptides. Isocratic two-step elution system for high loads on analytical columns

We have developed further our novel sample displacement chromatography (SDC) methodology to carry out preparative separations on analytical equipment and 15-cm analytical columns for sample loads < or = 200 mg. Thus, a two-step isocratic SDC protocol was developed and applied to the purification of important biologically active peptides, i.e. bradykinin antagonists of 10 and 11 residues. Following sample loading in 100% aqueous solvent at a concentration of approximately 7-10 mg/ml (with sample loads varying from 67 to 200 mg) onto a small C18 column (150 x 4.6 mm I.D., made up of three 50-mm columns attached in series), we applied isocratic elution with aqueous acetonitrile at two concentrations, the first (lower concentration) to displace hydrophilic impurities off the column and the second (higher concentration) to displace pure product from the column; hydrophobic impurities remain trapped on the column. This modified SDC approach promises to allow great flexibility in purifying peptides, at high yield of pure product (> 99% purity), and encompassing a range of sample hydrophobicities as well as sample loads (< or = 200 mg) varying by as much as a factor of three.

High-throughput peptide synthesis and peptide purification strategy at the low micromol-scale using the 96-well format

The increasing demand for short- and medium-sized peptides in many fields of biological, medical and pharmaceutical research requires optimized and universally applicable high-throughput synthesis and purification techniques at the low-micromol scale. Here, we describe a continuous peptide synthesis/purification approach using the 96-well format. First, a micromol scale peptide synthesis on resin beads was optimized on a novel miniaturized 96-reaction vessel block employing standard Fmoc/tBu-chemistry. Almost 90% of the synthesized peptides contained the target sequence as the main component, as judged from matrix-assisted laser desorption/ionization (MALDI) mass spectra. Impurities were mostly related to partially protected peptides. Second, we tested the applicability of ion pair reversed-phase solid-phase extraction (IP-RP-SPE) to purify individual peptides. Depending on the length and predicted hydrophobicity of the peptides, elution was performed with 25 or 35% aqueous acetonitrile in the presence of 0.1% trifluoroacetic acid (TFA). Thus, scavengers used during TFA cleavage and partially protected peptides carrying very hydrophobic protecting groups were effectively removed. Using a narrow step gradient, the target peptides were even separated from deleted sequences and protected peptides with similar hydrophobicities. Third, we combined the micromol-scale synthesis in the 96-well format with purification by IP-RP-SPE on a 96-well micro-extraction plate format. This simple, fast and parallel approach was tested on 12-mer and 15-mer peptides to map epitopes of T- and B-cell clones, respectively. Approximately 80% of all peptides were obtained at purities > 90% without purification by RP-HPLC. In summary, this novel approach has several advantages: (i) the micromol-scale reduced the cost of peptide synthesis, (ii) large numbers of peptides were purified faster, (iii) the volumes of eluents and waste were significantly reduced, and (iv) the RP-HPLC column was not contaminated with hydrophobic impurities.