Influence of buffer zone concentrations on efficiency in partial filling micellar electrokinetic chromatography

Approach to quasi stationary electrokinetic chromatography

A partial filling (PF) electrokinetic chromatography (EKC) system in combination with the application of weak counter pressures was built up by the combination of an UV-active polymeric dye, Poly R-478, used as additive in the separation buffer (SB) zone and an UV-permeable borate background buffer (BB). The electroosmotic flows of the buffers were equalized by matching their ionic strengths to achieve best efficiency. The influence of the pressure for the injection of the separation buffer and the effect of the counter pressure on the breakthrough of the separation buffer zone was investigated. The quasi stationary state of the separation buffer zone was evaluated by recording breakthrough curves. Based on these data the counter pressure was manipulated so that the separation buffer zone became quasi stationary and a large interference-free migration time window results. The system was optimized using a mixture of amino/nitroaromatics as test compounds.

(Micellar) electrokinetic chromatography: an interesting solution for the liquid phase separation dilemma

High-performance liquid chromatography (HPLC) is a well-established method in modern analysis. The method is simple, very robust and is applicable to the majority of components to be analyzed in contrast to gas chromatography. Low efficiency and small peak capacity are sore points of HPLC when complex mixtures have to be separated. The reason for this dilemma is the small diffusion coefficient of the analytes in the liquid mobile phase compared to a gaseous phase. This review, complemented by exemplary calculated data and some latest results of our own research, illustrates the dilemma of liquid phase chromatography to achieve high efficiencies under reasonable conditions. It is shown that (micellar) electrokinetic chromatography, offering fast and efficient separations, is a very promising solution for this dilemma. Additional features of this method are possibilities of on-line analyte concentration, coupling to mass spectrometry and the easy change of selectivities by applying various separation additives. The pros and cons of electrokinetic chromatography are pointed out and some application examples are given.

Improved separation of microheterogeneities and isoforms of proteins by capillary electrophoresis using segmental filling with SDS and PEO in the background electrolyte

To improve the separation efficiency while achieving high sensitivity for the analysis of proteins' microheterogeneity, a segmental-filling technique has been developed and tested in capillary electrophoresis with laser-induced native fluorescence using a pulsed Nd:YAG laser. Using a short plug of SDS applied to the capillary and the anticonvectant poly(ethylene oxide) (PEO), the microheterogeneities of a number of proteins with pI values ranging from 4.5 to 11.1 could be detected. This high resolving power is due to reduced adsorption on the capillary wall, sieving, and the interaction with SDS. Consequently, the length and the concentration of the SDS plug play a significant role in determining the resolution and sensitivity. The method has been applied to the analysis of salivary and cerebrospinal fluid (CSF) samples. Without any sample pretreatment, using a 10-s 1x SDS plug, six alpha-amylase isoforms in a salivary sample were resolved in 17 min and three more peaks were detected in a CSF sample. With simplicity, high resolving power, and rapidity, the method has shown great potential for proteomics.

Study of flow profile distortions and efficiency in counter pressure moderated partial filling micellar electrokinetic chromatography in relation to the relative buffer zone lengths

The influence of the relative buffer zone lengths on the efficiency was investigated in partial filling micellar electrokinetic chromatography using sodium dodecyl sulfate as separation additive. Varying relative zone lengths were obtained by applying identical initial separation zone lengths but different total lengths of the capillaries. Plate numbers of a homologous series of omega-phenylalcohols were measured to indicate the effect of both a changing relative zone length during the run and a counter pressure applied on the cathodic buffer reservoir. The magnitude and the course of these plate numbers are discussed on the basis of models for flow profile superposition and flow profile deformation which are caused by an intersegmental pressure arising at the boundary between the two buffer zones with different electroosmotic flow velocities. Calculation of the intersegmental pressure and of the resulting laminar flow components in the buffer zones on the basis of some equations for electroosmotic and hydrodynamic flow supported the interpretation that a long background buffer zone should be avoided

Partial filling micellar electrokinetic chromatography optimization studies of ibuprofen, codeine and degradation products, and coupling to mass spectrometry

Studies have been performed to evaluate whether an on-line partial filling-micellar electrokinetic chromatography (PF-MEKC) system could be applied to a recently developed MEKC method for the separation of ibuprofen, codeine and one of the degradation products. Attempts to couple the PF-MEKC system to MS have also been performed. SDS concentration, micellar zone length and concentration of acetonitrile in the buffer were optimized using factorial design. When a small micelle zone was injected directly after the sample introduction, the results improved markedly. The MS parameters have not been optimized, but the studies show promising results for the use of PF-MEKC-mass spectrometry for identification of the degradation products.