Chromatographic separation of proteins on metal immobilized iminodiacetic acid-bound molded monolithic rods of macroporous poly(glycidyl methacrylate-co-ethylene dimethacrylate)

In situ functionalization of HPLC monolithic columns based on divinylbenzene-styrene-4-vinylbenzyl chloride

The properties of chromatographic columns are largely determined by functional groups located on the sorbent surface. For monolithic columns, surface functional groups can be created during synthesis stage or by chemical bonding with the complete surface of the sorbent. One of sorbent modification approach is to use on-column click reactions with surface reactive groups. In this study, the surface treatment of monolithic sorbent based on divinylbenzene (DVB), styrene (St) and 4-vinylbenzyl chloride (4VBC) copolymer by heterocyclic nitrogen-containing compounds 1-methylimidazole (1MI), 2-methylimidazole (2MI), 2-methylpyridine (2 MP) and 4-methylpyridine (4 MP) is described. The reaction of nitrogen-containing heterocycles with chloromethyl fragments on the surface results in formation of ion pairs and significantly changes the selectivity of monolithic columns. The chromatographic properties of prepared columns are studied. Modified columns can be operated in reversed-phase (RP) chromatography or in hydrophilic interaction liquid chromatography (HILIC) with different composition of the mobile phase. Separation examples of various chemical substances classes are given.

Construction of polymer monolithic columns in polypropylene ink-pen tubes for separation of proteins by cation-exchange chromatography

We describe the synthesis of polymer monoliths inside polypropylene tubes from ink pens. These tubes are cheap, chemically stable, and resistant to pressure. UV-initiated grafting with 5 wt% benzophenone in methanol for 20 min activated the internal surface, thus enabling the covalent binding of ethylene glycol dimethacrylate, also via photografting. The pendant vinyl groups attached a poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) monolith prepared via photopolymerization. These tubes measured 100-110 mm long, with 2 mm of internal diameter. The parent monoliths were functionalized with Na₂ SO₃ or iminodiacetate to produce strong and weak cation exchangers, respectively. The columns exhibited permeabilities varying from 2.7 to 3.3 × 10^-13  m² , which enabled the separation of proteins at 500 µL/min and back pressures <2.8 MPa. Neither structure collapse nor monolith detachment occurred at flow rates as high as 2.0 mL/min, which produced back pressures between 6.9 and 9.0 MPa. The retention times of ovalbumin, ribonuclease A, cytochrome C, and lysozyme in salt gradient at pH 7.0 followed the order of increasing isoelectric points, confirming the cation exchange mechanism. Separation and determination of lysozyme in egg white proved the applicability of the columns to the analysis of complex samples.

Various Strategies in Post-Polymerization Functionalization of Organic Polymer-Based Monoliths Used in Liquid Phase Separation Techniques

This review article is aimed at summarizing the various strategies that have been developed so far for post-polymerization functionalization (PPF) of organic polymer-based monoliths used in liquid phase separation techniques, namely HPLC at all scales and capillary electrochromatography (CEC). The reader will find the organic reactions performed on monolithic columns for grafting the chromatographic ligands needed for solving the separation problems on hand. This process involves therefore the fabrication of template monoliths that carry reactive functional groups to which chromatographic ligands can be covalently attached in a post-polymerization kind of approach. That is, the template monolith that has been optimized in terms of pore structure and other morphology can be readily modified and tailor made on column to fit a particular separation. The review article will not only cover the various strategies developed so far but also describe their separation applications. To the best of our knowledge, this review article will be the first of its kind.

Synthesis of a poly(sulfobetaine-co-polyhedral oligomeric silsesquioxane) hybrid monolith via an in-situ ring opening quaternization for use in hydrophilic interaction capillary liquid chromatography

An in-situ approach is described for synthesis of poly(sulfobetaine-co-polyhedral oligomeric silsesquioxane) [poly(sulfobetaine-co-POSS)] that can be used in a hybrid monolithic column as a hydrophilic liquid chromatography (HILIC) stationary phase. Synthesis involves (a) radical polymerization of octa(propyl methacrylate)-polyhedral oligomeric silsesquioxane (MA-POSS) and organic monomers such as dimethylaminopropyl methacrylate or vinyl imidazole, and (b) in-situ ring-opening quaternization between 1,4-butane sultone and the organic monomers. The sulfobetaine groups are generated in-situ monolith. This obviates the need for synthesis of sulfobetaine monomer previously. The pore size and permeability of the material can be tuned by using a binary porogenic system (polyethyleneglycol 600 and acetonitrile) and via the composition of the polymerization mixture. The optimized hybrid monolith owns its merits to the presence of POSS and sulfobetaine groups with good mechanical stability, the lack of residual silanol groups, and adequate hydrophilicity. The column filled with the monoliths was evaluated as a stationary phase for HILIC. Several kinds of polar compounds (including nucleosides, bases, phenols, aromatic acids and amides) were separated by using mobile phases with high organic solvent fractions in capillary liquid chromatography. Graphical abstractAn in-situ approach is described for synthesis of poly(sulfobetaine-co-polyhedral oligomeric silsesquioxane) hybrid monolithic column for use in hydrophilic liquid chromatography. The optimized monolith owns good mechanical stability, the lack of residual silanol groups and adequate hydrophilicity. Baseline separation of several kinds of polar compounds is achieved on the column. MA-POSS: octa(propyl-methacrylate) polyhedral oligomeric silsesquioxane; DMAEMA: dimethylaminoethyl methacrylate; AIBN: azodiisobutyronitrile. Poly(DMABS-co-POSS): poly(N-(4-sulfobutyl)-N-methacryloxypropyl- N,N-dimethylammonium-betaine-co-polyhedral oligomeric silsesquioxane).

(E)-Propyl α-Cyano-4-Hydroxyl Cinnamylate: A High Sensitive and Salt Tolerant Matrix for Intact Protein Profiling by MALDI Mass Spectrometry

Low-abundance samples and salt interference are always of great challenges for the practical protein profiling by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). Herein, a series of carboxyl-esterified derivatives of α-cyano-4-hydroxycinnamic acid (CHCA) were synthesized and evaluated as matrices for MALDI-MS analysis of protein. Among them, (E)-propyl α-cyano-4-hydroxyl cinnamylate (CHCA-C3) was found to exhibit excellent assay performance for intact proteins by improving the detection sensitivity 10 folds compared with the traditional matrices [i.e., super2,5-dihydroxybenzoic acid (superDHB), sinapic acid (SA), and CHCA]. In addition, CHCA-C3 was shown to have high tolerance to salts, the ion signal of myoglobin was readily detected even in the presence of urea (8 M), NH4HCO3 (2 M), and KH2PO4 (500 mM), meanwhile sample washability was robust. These achievements were mainly attributed to improved ablation ability and increased hydrophobicity or affinity of CHCA-C3 to proteins in comparison with hydrophilic matrixes, leading to more efficient ionization of analyte. Furthermore, direct analysis of proteins from crude egg white demonstrated that CHCA-C3 was a highly efficient matrix for the analysis of low-abundance proteins in complex biological samples. These outstanding performances indicate the tremendous potential use of CHCA-C3 in protein profiling by MALDI-MS. Graphical Abstract ᅟ.

Novel in-capillary polymeric monoliths arising from glycerol carbonate methacrylate for flow-through catalytic and chromatographic applications

In-capillary reactive polymer monoliths have been prepared from glycerol carbonate methacrylate functional monomer, suitably functionalized and further applied to separation science and flow-through catalysis, respectively.

Protein adsorption by a high-capacity cation-exchange membrane prepared via surface-initiated atom transfer radical polymerization

A weak cation-exchange membrane was prepared via surface-initiated atom transfer radical polymerization of glycidyl methacrylate and subsequent two-step derivation, and then two new parameters were used to explain the protein adsorption behavior.

Highly specific phosphopeptide enrichment by titanium(IV) cross-linked chitosan composite

Natural chitosan was applied as supporting material for Ti(IV) based immobilized metal ion affinity chromatographic (IMAC) material (Ti-CTS). Compared with other polymer based IMAC, Ti-CTS can save the cockamamie synthesis procedures and be easy to obtain. The morphology, surface area, pore volume and elemental composition of Ti-CTS were revealed by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) method and X-ray photoelectron spectroscopy (XPS). Tryptic digest products from several standard proteins and two real samples (non-fat milk and serum) were enriched using Ti-CTS to demonstrate the efficiency of this method. The results showed that this composite enables high sensitive and selective phosphopeptide enrichment from casein variants, non-fat milk and human serum. Furthermore, multi-phosphorylated peptides with three serine phospholated sites (S*S*S*) demonstrated high affinity to Ti-CTS. Hence, this method had great potential for future studies of complex phosphoproteomes and especially multi-phosphorylated peptides.

Preparation of Concanavalin A-Chelating Magnetic Nanoparticles for Selective Enrichment of Glycoproteins

In this work, a soft and nondestructive approach was developed to prepare concanavalin A-chelating magnetic nanoparticles (Con A-MNPs) for selective enrichment of glycoproteins. Ethylenediamine tetraacetic acid-modified-MNPs (EDTA-MNPs) were prepared by a one-pot chemical coprecipitation method first, and then, Cu(II) cations were used as bridge groups to immobilize Con A on EDTA-MNPs. The as-prepared absorbents with a mean diameter of 15 nm showed a strong magnetic response to an externally applied magnetic field. The results of thermogravimetric analysis showed the content of immobilized Con A was up to 28 wt %. For glycoprotein ovalbumin, the maximum capacity and equilibrium constant were 72.41 mg/g and 0.6035 L/mg, respectively. The as-prepared nanocomposites exhibited a remarkable selectivity for glycoproteins and can enrich glycoproteins specifically from a mixture of glycoprotein and nonglycoprotein even at a molar ratio of 1:600. It was also successfully applied for the enrichment of glycoproteins from real egg white samples. We expect that our finding will serve as a helpful template for others to design new adsorbents for enriching glycoproteins.

Dynamic Electrochemical Membranes for Continuous Affinity Protein Separation

A membrane system with nm-scale thick electrodes is able to selectively bind genetically modified proteins and pump them across the membrane with sequential voltage pulses. The electrodes are located at the first 20nm of pore entrances to specifically capture targeted proteins and block non-specific protein transport through the pores during the binding cycle. During the release cycle, concentration of imidazole is controlled to keep the pore blocked while releasing proteins at the bottom edge of the electrode. A separation factor for GFP:BSA of 16 was achieved with observed GFP electrophoretic mobility of 2.54×10^-6cm²v^-1S^-1. This non-optimized system with a membrane area of 0.75 cm² has the same throughput as 1ml of commercially available chromatography columns showing viability as a continuous process. This system will enable continuous separation of expressed proteins directly from fermentation broths dramatically simplifying the separation process as well as reducing biopharmaceutical production costs.

Production of novel polymer monolithic columns, with stationary phase gradients, using cyclic olefin co-polymer (COC) optical filters

Polymer monolithic columns with controlled surface ligand density, providing stationary phase gradients within monolithic capillary columns, have been developed using photo-grafting through optical filters. Utilising commercially available cyclic olefin co-polymer (COC) films, the production of an optical filter capable of attenuating UV irradiation, in a tailored manner, was investigated. This novel optical filter was successfully applied to the surface modification of poly(BuMA-co-EDMA) monolithic columns in a multi-step grafting procedure. Fabricated columns were subjected to scanning capacitively coupled contactless conductivity (sC(4)D), to determine the distribution of the grafted functional groups, axially along the column. Further modification to produce a chelating stationary phase gradient of iminodiacetic acid (IDA) was demonstrated. To demonstrate the distribution of the IDA sites, a metal cation (Cu(2+)) was complexed to the IDA forming a chelate. Upon the formation of a complex of IDA with Cu(2+), an overall drop in conductive response was observed. The COC optical filter was also used in the fabrication of a grafted gradient of strong cation exchanger (SCX), sulphopropyl methacrylate (SPM) upon a polymer monolith, demonstrating the broader applicability of such a filter.

[Advance of stir bar sorptive extraction]

Stir bar sorptive extraction (SBSE) is an environmentally-friendly technology of sample preparation which combines extraction, cleanup and enrichment together, and it has been developed rapidly and widely applied to the trace enrichment of various target analytes in environmental, food and biological samples. Based on our research, the advance of SBSE, especially, the development of new coatings, are reviewed. At the same time, the possible development orientations of SBSE are discussed.

Iron oxide nanoparticle coating of organic polymer-based monolithic columns for phosphopeptide enrichment

A new monolithic capillary column with an iron oxide nanoparticle coating has been developed for selective and efficient enrichment of phosphopeptides. Iron oxide nanoparticles were prepared by a co-precipitation method and stabilized by citrate ions. A stable coating of nanoparticles was obtained via multivalent electrostatic interactions of citrate ions on the surface of iron oxide nanoparticles with a quaternary amine functionalized poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolith. A high dynamic binding capacity of 86 μmol/mL column volume was measured with an adenosine-5'-triphosphate. Performance of the monolithic column was demonstrated with the efficient and selective enrichment of phosphopeptides from peptide mixtures of α-casein and β-casein digests and their MALDI/MS characterization in off-line mode.

Reduction of protein concentration range difference followed by multicolumn fractionation prior to 2-DE and LC-MS/MS profiling of serum proteins

This article is concerned with the reduction of protein concentration range differences by the peptide beads library technology (ProteoMiner™ or "equalizer" technology), which in principle allows the enrichment of proteins to the same concentration level (i.e. protein equalizer) regardless of the original protein abundance in a given biological fluid such as human serum, which is the subject of our investigation. After the equalization step, the captured proteins from human serum were fractionated on a series of tandem monolithic columns with surface-bound iminodiacetic acid ligands to which three different metal ions, namely, Zn²+, Ni²+ and Cu²+ were immobilized to yield the so-called immobilized metal affinity chromatography columns. These three monolithic columns were connected to a reversed-phase column packed with polystyrene divinyl benzene beads. Aliquots taken from the four collected fractions from the four tandem columns were subsequently fractionated by 2-DE. Also, aliquots from the four collected fractions were tryptically digested and analyzed by LC-MS/MS. The strategy of subsequent fractionation on the four tandem columns after equalization allowed the identification of more proteins than simply using the equalization by ProteoMiner™ . The equalizer technology was compared to the immuno-subtraction approach. While the ProteoMiner™ technology is superior in terms of the overall number of captured proteins, it only complements the immuno-subtraction approach since the latter can capture the proteins that were not captured by the former.

Bioaffinity chromatography on monolithic supports

Affinity chromatography on monolithic supports is a powerful analytical chemical platform because it allows for fast analyses, small sample volumes, strong enrichment of trace biomarkers and applications in microchips. In this review, the recent research using monolithic materials in the field of bioaffinity chromatography (including immunochromatography) is summarized and discussed. After giving an introduction into affinity chromatography, information on different biomolecules (antibodies, enzymes, lectins, aptamers) that can act as ligands in bioaffinity chromatography is presented. Subsequently, the history of monoliths, their advantages, preparation and formats (disks, capillaries and microchips) as well as ligand immobilization techniques are mentioned. Finally, analytical and preparative applications of bioaffinity chromatography on monoliths are presented. During the last four years 37 papers appeared. Protein A and G are still most often used as ligands for the enrichment of immunoglobulins. Antibodies and lectins remain popular for the analysis of mainly smaller molecules and saccharides, respectively. The highly porous cryogels modified with ligands are applied for the sorting of different cells or bacteria. New is the application of aptamers and phages as ligands on monoliths. Convective interaction media (epoxy CIM disks) are currently the most used format in monolithic bioaffinity chromatography.