Comparison of reversed-phase liquid chromatography and hydrophilic interaction/cation-exchange chromatography for the separation of amphipathic α-helical peptides with l- and d-amino acid substitutions in the hydrophilic face

In situ photoinitiated fabrication of phosphorylcholine-functionalized polyhedral oligomeric silsesquioxane hybrid monolithic column for mixed-mode capillary electrochromatography

A phosphorylcholine-functionalized POSS hybrid monolithic column was synthesized via UV curing. It exhibits hydrophilic interaction and weak cation exchange chromatography retention mechanism for the separation of typical polar and charged compounds.

Characterization of intact neo-glycoproteins by hydrophilic interaction liquid chromatography

In this study, an HPLC HILIC-UV method was developed for the analysis of intact neo-glycoproteins. During method development the experimental conditions evaluated involved different HILIC columns (TSKgel Amide-80 and ZIC-pHILIC), and water-acetonitrile mixtures containing various types of acids and salts. The final selected method was based on a TSKgel Amide-80 column and a mobile phase composed of acetonitrile and water both containing 10 mM HClO4. The influence of temperature and sample preparation on the chromatographic performances of the HILIC method was also investigated. The method was applied to the separation of neo-glycoproteins prepared starting from the model protein RNase A by chemical conjugation of different glycans. Using the method here reported it was possible to monitor by UV detection the glycosylation reaction and assess the distribution of neo-glycoprotein isoforms without laborious sample workup prior to analysis.

Structure-guided RP-HPLC chromatography of diastereomeric α-helical peptide analogs substituted with single amino acid stereoisomers

An α-helical model peptide (Ac-EAEKAAKE-X-EKAAKEAEK-amide) was used as a template to examine the efficacy of conventional reversed-phase high-performance liquid chromatography (RP-HPLC) in separating peptide analogs with single substitutions (at position X) of diasteromeric amino acids Ile, allo-Ile, d-Ile and d-allo-Ile. We compared differences in peptide retention behavior on a C8 column and a C18 column at different temperatures. We demonstrated how subtle differences in peptide secondary structure affected by the different substitutions of amino acids with identical overall hydrophobicity enabled effective resolution of these peptide analogs. We also demonstrated the ability of RP-HPLC to separate Ile- and allo-Ile-substituted analogs of a 26-residue α-helical antimicrobial peptide (AMP), with the substitution site towards the C-terminus of the α-helix. These peptides show different values of antibacterial activity and hemolytic activity, and different selectivity against bacteria and human cells. Our results underline the ability of RP-HPLC to resolve even difficult diasteromeric peptide mixtures as well as its value in monitoring very subtle hydrophobicity changes in de novo-designed AMP.

Toward reading the sequence of short oligonucleotides from their retention factors obtained by means of hydrophilic interaction chromatography and ion-interaction reversed-phase liquid chromatography

Retention characteristics of selected synthetic 5'-terminal phosphate absent penta-nucleotides containing adenine, guanine, and thymine were studied in relation to their sequence by hydrophilic interaction chromatography and ion-interaction reversed-phase liquid chromatography. The organic solvent content, pH, and buffer concentration in mobile phases were evaluated as influential separation conditions. Data demonstrate that both compared chromatographic modes can be used to separate synthetic penta-nucleotides according to their nucleotide composition. Moreover, reversed-phase liquid chromatography allows separation according to their sequence. We have found a simple linear additive model to describe the retention order in both separation modes in regard to their sequence. In hydrophilic interaction chromatography, the retention behavior is controlled primarily by the hydrophilicity of involved nucleotides and minimally by their sequence position. For reversed-phase liquid chromatography, the nucleotide hydrophobicity plays an important role in their retention properties and the influence of their location in sequence on the retention increases toward the center and decreases toward the termini. Our results show that the penta-nucleotide sequence, and thus its spatial arrangement induced by the surrounding environment, is highly related to the retention properties, so it may be hypothetically used to read the sequence from the retention properties acquired under particular separation conditions.

Stationary and mobile phases in hydrophilic interaction chromatography: a review

Hydrophilic interaction chromatography (HILIC) is valuable alternative to reversed-phase liquid chromatography separations of polar, weakly acidic or basic samples. In principle, this separation mode can be characterized as normal-phase chromatography on polar columns in aqueous-organic mobile phases rich in organic solvents (usually acetonitrile). Highly organic HILIC mobile phases usually enhance ionization in the electrospray ion source of a mass spectrometer, in comparison to mobile phases with higher concentrations of water generally used in reversed-phase (RP) LC separations of polar or ionic compounds, which is another reason for increasing popularity of this technique. Various columns can be used in the HILIC mode for separations of peptides, proteins, oligosaccharides, drugs, metabolites and various natural compounds: bare silica gel, silica-based amino-, amido-, cyano-, carbamate-, diol-, polyol-, zwitterionic sulfobetaine, or poly(2-sulphoethyl aspartamide) and other polar stationary phases chemically bonded on silica gel support, but also ion exchangers or zwitterionic materials showing combined HILIC-ion interaction retention mechanism. Some stationary phases are designed to enhance the mixed-mode retention character. Many polar columns show some contributions of reversed phase (hydrophobic) separation mechanism, depending on the composition of the mobile phase, which can be tuned to suit specific separation problems. Because the separation selectivity in the HILIC mode is complementary to that in reversed-phase and other modes, combinations of the HILIC, RP and other systems are attractive for two-dimensional applications. This review deals with recent advances in the development of HILIC phase separation systems with special attention to the properties of stationary phases. The effects of the mobile phase, of sample structure and of temperature on separation are addressed, too.

Separation of purine and pyrimidine bases and nucleosides by hydrophilic interaction chromatography

The separation of 12 model compounds chosen among purine and pyrimidine bases and nucleosides was studied by using hydrophilic interaction chromatography (HILIC). The compounds investigated were small molecules with relevant properties for biomedical and pharmaceutical studies. The mixture of pyrimidines and purines was applied on a ZIC-HILIC 150 x 2.1 mm, 5 microm, and two TSKgel Amide-80 150 x 2.0 mm, 5 microm and 3 microm particle size columns. The retention of the analytes was studied by varying ACN%, ammonium formate concentration, pH, and column temperature. The results obtained confirmed the elution order of nucleobases, nucleosides, and nucleotides based on their hydrophobicity. The retention mechanism of the columns was studied considering the models used for describing partitioning and surface adsorption. The influence on retention of chromatographic conditions (ACN%, salt concentration, pH, and temperature) was described and discussed for both columns. The optimization of the conditions studied allowed to assess a gradient method for the separation of the 12 analytes. The developed method is a valuable alternative to existing methods for the separation of the compounds concerned.

Mixed-mode hydrophilic interaction/cation-exchange chromatography (HILIC/CEX) of peptides and proteins

This review represents a summary of the development and application of a novel mixed-mode HPLC approach to the separation and analysis of peptides and proteins termed hydrophilic interaction/cation-exchange chromatography (HILIC/CEX). This approach combines the most advantageous aspects of two widely different separation mechanisms, i.e. a separation based on hydrophilicity/hydrophobicity differences between polypeptides overlaid on a separation based on net charge. Applications described include HILIC/CEX separations of cyclic peptides, alpha-helical peptides, random coil peptides and modified or deletion products of synthetic peptides. In addition, the excellent resolving ability of HILIC/CEX for modified histone proteins is described. This approach is shown to represent an excellent complement to RP chromatography (RPC), as well as being a potent analytical tool in its own right.

Mixed-mode hydrophilic interaction/cation-exchange chromatography: separation of complex mixtures of peptides of varying charge and hydrophobicity

Mixed-mode hydrophilic interaction/cation-exchange chromatography (HILIC/CEX) was applied to the separation of two mixtures of synthetic peptide standards: (i) a 27-peptide mixture containing three groups of peptides (each group containing nine peptides of the same net charge of +1, +2 or +3), where the hydrophilicity/hydrophobicity of adjacent peptides within the groups varied only subtly (generally by only a single carbon atom); and (ii) peptide pairs with the same composition but different sequences, where the sole difference between the peptides was the position of a single amino acid substitution. HILIC/CEX is essentially CEX chromatography in the presence of high levels of organic modifier (generally ACN). The present study demonstrated the dramatic effect of increasing ACN concentration (optimum levels of 60-80%, depending on the application) on the separation of both mixtures of peptides. The greater the charge on the peptides, the better the separation achievable by HILIC/CEX. In addition, HILIC/CEX separation of both the peptide mixtures used in the present study was shown to be superior to that of the more commonly applied RP-HPLC mode. Our results highlight again the efficacy of HILIC/CEX as a peptide separation mode in its own right as well as an excellent complement to RP-HPLC.

Stationary phases for hydrophilic interaction chromatography, their characterization and implementation into multidimensional chromatography concepts

Hydrophilic interaction chromatography (HILIC) is becoming increasingly popular for separation of polar samples on polar columns in aqueous-organic mobile phases rich in organic solvents (usually ACN). Silica gel with decreased surface concentration of silanol groups, or with chemically bonded amino-, amido-, cyano-, carbamate-, diol-, polyol-, or zwitterionic sulfobetaine ligands are used as the stationary phases for HILIC separations, in addition to the original poly(2-sulphoethyl aspartamide) strong cation-exchange HILIC material. The type of the stationary and the composition of the mobile phase play important roles in the mixed-mode HILIC retention mechanism and can be flexibly tuned to suit specific separation problems. Because of excellent mobile phase compatibility and complementary selectivity to RP chromatography, HILIC is ideally suited for highly orthogonal 2-D LC-LC separations of complex samples containing polar compounds, such as peptides, proteins, oligosaccharides, drugs, metabolites and natural compounds. This review attempts to present an overview of the HILIC separation systems, possibilities for their characterization and emerging HILIC applications in 2-D off-line and on-line LC-LC separations of various samples, in combination with RP and other separation modes.

Hydrophilic interaction chromatography of small metal species in plants using sulfobetaine- and phosphorylcholine-type zwitterionic stationary phases

Hydrophilic interaction chromatography (HILIC) was applied for the separation of small, noncovalent metal species, and free ligands in plants, using two different zwitterionic stationary phases at pH 7.3. Ligands ranged from amino acids and phytosiderophores to organic acids and synthetic chelators like EDTA. Our results confirmed the suitability of zwitterionic stationary phases for the separation of such ligands and their metal complexes. In particular, the chromatographic behavior of phytosiderophore complexes of copper, nickel, and zinc on a sulfobetaine-type material was compared to that on a phosphorylcholine-type material under otherwise identical conditions. A compression of the usable retention range for phytosiderophore species on the latter phase was found, which can be traced back to the reversed charge orientation of the zwitterionic functionalities. Differences were also found for the integrity of more labile metal chelates during separation on the two columns. In particular, Ni-malate could only be analyzed on the sulfobetaine phase, and Cu-glutathione, Ni-aspartate, and Ni-citrate complexes were only stable on the phosphorylcholine stationary phase at pH 7.3. Ni-histidine species were only found after lowering the pH to 4-5. The identification of separated species is possible by online ESI-MS in the negative ionization mode.

Separation efficiencies in hydrophilic interaction chromatography

Hydrophilic interaction chromatography (HILIC) is important for the separation of highly polar substances including biologically active compounds, such as pharmaceutical drugs, neurotransmitters, nucleosides, nucleotides, amino acids, peptides, proteins, oligosaccharides, carbohydrates, etc. In the HILIC mode separation, aqueous organic solvents are used as mobile phases on more polar stationary phases that consist of bare silica, and silica phases modified with amino, amide, zwitterionic functional group, polyols including saccharides and other polar groups. This review discusses the column efficiency of HILIC materials in relation to solute and stationary phase structures, as well as comparisons between particle-packed and monolithic columns. In addition, a literature review consisting of 2006-2007 data is included, as a follow up to the excellent review by Hemström and Irgum.

Ion-interaction CZE: the presence of high concentrations of ion-pairing reagents demonstrates the complex mechanisms involved in peptide separations

We have furthered our understanding of the separative mechanism of a novel CE approach, termed ion-interaction CZE (II-CZE), developed in our laboratory for the resolution of mixtures of cationic peptides. Thus, II-CZE and RP-HPLC were applied to the separation of peptides differing by a single amino acid substitution in 10- and 12-residue synthetic model peptide sequences. Substitutions differed by a wide range of properties or side-chain type (e.g., alkyl side-chains, polar side-chains, etc.) at the substitution site. When carried out in high concentrations (400 mM) of pentafluoropropionic acid (PFPA), II-CZE separated peptides in order of increasing hydrophobicity when the substituted side-chains were of a similar type; when II-CZE was applied to the mixtures of peptides with substitutions of side-chains that differed in the type of functional group, there was no longer a correlation of electrophoretic mobility in II-CZE with relative peptide hydrophobicity, suggesting that a third factor is involved in the separative mechanism beyond charge and hydrophobicity. Interestingly, the hydrophobic PFPA- anion is best for separating peptides that differ in hydrophobicity with hydrophobic side-chains but high concentrations of the hydrophilic H2PO4- anion are best when separating peptides that differ in polar side-chains relative to hydrophobic side-chains. We speculate that differential hydration/dehydration properties of various side-chains in the peptide and the hydration/dehydration properties of the hydrophilic/hydrophobic anions as well as the electrostatic attractions between the peptide and the anions in solution all play a critical role in these solution-based effects.

HPLC analysis and purification of peptides

High-performance liquid chromatography (HPLC) has proved extremely versatile over the past 25 yr for the isolation and purification of peptides varying widely in their sources, quantity and complexity. This article covers the major modes of HPLC utilized for peptides (size-exclusion, ion-exchange, and reversed-phase), as well as demonstrating the potential of a novel mixed-mode hydrophilic interaction/cation-exchange approach developed in this laboratory. In addition to the value of these HPLC modes for peptide separations, the value of various HPLC techniques for structural characterization of peptides and proteins will be addressed, e.g., assessment of oligomerization state of peptides/proteins by size-exclusion chromatography and monitoring the hydrophilicity/hydrophobicity of amphipathic alpha-helical peptides, a vital precursor for the development of novel antimicrobial peptides. The value of capillary electrophoresis for peptide separations is also demonstrated. Preparative reversed-phase chromatography purification protocols for sample loads of up to 200 mg on analytical columns and instrumentation are introduced for both peptides and recombinant proteins.

Hydrophilic interaction chromatography

Separation of polar compounds on polar stationary phases with partly aqueous eluents is by no means a new separation mode in LC. The first HPLC applications were published more than 30 years ago, and were for a long time mostly confined to carbohydrate analysis. In the early 1990s new phases started to emerge, and the practice was given a name, hydrophilic interaction chromatography (HILIC). Although the use of this separation mode has been relatively limited, we have seen a sudden increase in popularity over the last few years, promoted by the need to analyze polar compounds in increasingly complex mixtures. Another reason for the increase in popularity is the widespread use of MS coupled to LC. The partly aqueous eluents high in ACN with a limited need of adding salt is almost ideal for ESI. The applications now encompass most categories of polar compounds, charged as well as uncharged, although HILIC is particularly well suited for solutes lacking charge where coulombic interactions cannot be used to mediate retention. The review attempts to summarize the ongoing discussion on the separation mechanism and gives an overview of the stationary phases used and the applications addressed with this separation mode in LC.

A hydrophilic interaction chromatography coupled to a mass spectrometry for the determination of glutathione in plant somatic embryos

An electrospray ionization mass spectrometric (ESI-MS) determination of glutathione (GSH), a sulfur-containing tripeptide (gamma-Glu-Cys-Gly) with regulation and detoxication functions in metabolisms of most living organisms, from nanomolar to micromolar levels is described. A hydrophilic interaction chromatography (HILIC) with an isocratic elution using a mobile phase containing acetonitrile and an aqueous 0.00005% solution of trifluoroacetic acid (60/40%, v/v) was applied for the separation of GSH. The peptide detection was achieved in the presence of L-ascorbic acid which significantly enhanced the signal intensity of the molecular ion GSH [M+H]+ (m/z 308). The calibration curve was linear (R2=0.9995) in the concentration range from 2 nM to 10 microM with a detection limit (LOD, S/N=3) of 0.5 nM. The excellent detection limit, and the excellent selectivity and high reproducibility of this method enabled determination of GSH in a single plant somatic embryo of a Norway spruce (Picea abies). The average amount of GSH in the single somatic embryos (n=18) was 9 pmol per embryo. Owing to our results, it can be supposed that the proposed HILIC/ESI-MS analysis might be used for GSH determination in microscopic cell structures and in single cell analyses.

The perchlorate anion is more effective than the trifluoroacetate anion as an ion-pairing reagent for reversed-phase chromatography of peptides

The addition of salts, specifically sodium perchlorate (NaClO4), to mobile phases at acidic pH as ion-pairing reagents for reversed-phase high-performance liquid chromatography (RP-HPLC) has been generally overlooked. To demonstrate the potential of NaClO4 as an effective anionic ion-pairing reagent, we applied RP-HPLC in the presence of 0-100 mM sodium chloride (NaCl), sodium trifluoroacetate (NaTFA) or NaClO4 to two mixtures of synthetic 18-residue peptides: a mixture of peptides with the same net positive charge (+4) and a mixture of four peptides of +1, +2, +3 and +4 net charge. Interestingly, the effect of increasing NaClO4 concentration on increasing peptide retention times and selectivity changes was more dramatic than that of either NaCl or NaTFA, with the order of increasing anion effectiveness being Cl- << TFA- < C104-. Such effects were more marked when salt addition was applied to eluents containing 10 mM phosphoric acid (H3PO4) compared to 10 mM trifluoroacetic acid (TFA) due to the lesser starting anion hydrophobicity of the former mobile phase (containing the phosphate ion) compared to the latter (containing the TFA- ion).

Orthogonal method development using hydrophilic interaction chromatography and reversed-phase high-performance liquid chromatography for the determination of pharmaceuticals and impurities

A hydrophilic interaction chromatography (HILIC) method has been developed and validated as a secondary or orthogonal method complementary to a reversed-phase HPLC (RP-HPLC) method for quantitation of a polar active pharmaceutical ingredient and its three degradation products. The HILIC method uses a diol column and a mobile phase consisting of acetonitrile/water and ammonium chloride. The compounds of interest show significant differences in retention behaviors with the two very different chromatographic systems, which are desired in developing orthogonal methods. The HILIC method is validated and has met all validation acceptance criteria for the support of drug development activities.

Stereoselective peptide analysis

The stereochemistry of a peptide determines its spatial features and can profoundly influence its chemical properties and biological activity. Thus, the analysis of the stereochemical properties of a peptide is an important aspect of its characterisation. For such investigations a "selector" that engages in stereoselective interactions with the peptide analytes is often used. A substantiated knowledge of the underlying molecular recognition mechanism will therefore be helpful in understanding existing and developing new stereoselective analysis systems. After a short introduction concerning the fundamentals of peptide stereoisomers and their biological implications, the stereoselective peptide analysis methods described in the literature are comprehensively reviewed. The characteristics and applications of the employed methods based on various techniques including chromatography (pressure- and electrokinetically driven), capillary electrophoresis, nuclear magnetic resonance spectroscopy and mass spectrometry are discussed. The various selectors that have been utilised to discriminate peptide enantiomers and/or diastereomers are described concurrently. The review concludes with an overview of combinations and comparisons of techniques that have been applied to the analysis of peptide stereoisomers and constitute a trend for further developments.