Post-capillary affinity detection of protein microheterogeneity in capillary zone electrophoresis

On-line wall-free cell for laser-induced fluorescence detection in capillary electrophoresis

A wall-free detection method based on liquid junction in a capillary gap was proposed for laser-induced fluorescence (LIF) of capillary electrophoresis (CE). The capillary gap of the wall-free cell was fabricated by etching a 10-mm x 50-microm I.D. fused-silica capillary to obtain a polyimide coating sleeve, decoating about 6mm at one end of both 50 microm I.D. separation and liquid junction capillary, inserting the treated capillary ends into the coating sleeve oppositely, fixing the capillaries with a gap distance of 140 microm by epoxy glue and removing the coating sleeve by burning. The theoretical model, experimental results and wall-free cell images indicated that the gap distance and applied voltage were main influence factors on the wall-free detection. Since the wall-free cell increased the absorption light path and avoided the stray light from the capillary wall, it improved the ratio of signal to noise and limit of detection (LOD) of CE-LIF. Three flavin compounds of riboflavin (RF), flavin mononucleotide sodium (FMN) and flavin adenine dinucleotide disodium (FAD) were used to evaluate the wall-free detection method. Compared with on-column cell, the LODs of the wall-free cell were improved 15-, 6- and 9-fold for RF, FMN and FAD, respectively. The linear calibration concentrations of the flavins ranged from 0.005 to 5.0 micromol/L. The column efficiency was in the range from 1.0 x 10(5) to 2.5 x 10(5) plates. The wall-free detection of CE-LIF was applied to the analysis of the flavins in spinach and lettuce leaves.

Laser ablation construction of on-column reagent addition devices for capillary electrophoresis

A simple and reproducible technique for constructing perfectly aligned gaps in fused-silica capillaries has been developed for postcolumn reagent addition with capillary electrophoresis. This technique uses laser ablation with the second harmonic of a Nd:YAG laser (532 nm) at 13.5 mJ/pulse and a repetition rate of 15 Hz to create these gaps. A capillary is glued to a microscope slide and positioned at the focal point of a cylindrical lens using the focused beam from a laser pointer as a reference. Gaps of 14.0 +/- 2.2 microm (n = 33) at the bore of the capillary are produced with a success rate of 94% by ablation with 400 pulses. This simple method of gap construction requires no micromanipulation under a microscope, hydrofluoric acid etching, or use of column fittings. These structures have been used for reagent addition for postcolumn derivatization with laser-induced fluorescence detection and have been tested for the separation of proteins and amino acids. Detection limits of 6 x 10(-7) and 1 x 10(-8) M have been obtained for glycine and tranferrin, respectively. Separation efficiencies obtained using these gap reactors range from 38,000 to 213,000 theoretical plates.

On-line post-capillary affinity detection of immunoglobulin G for capillary zone electrophoresis

To address the quality issues of antibody manufacturing, post-capillary affinity detection of immunoglobulin G (IgG) is developed for capillary zone electrophoresis. In analogy to a two-dimensional separation system, capillary zone electrophoresis (CZE), as the first dimension, resolves IgG variants based on their differences in molecular structure. IgG variants separated by CZE are discriminated against other serum and cellular proteins by affinity complex formation with protein A binding fragment in a post-capillary reactor. The analytical power of post-capillary affinity detection is demonstrated for rapid and selective heterogeneity analysis of human IgG subclasses and monoclonal antibodies in complex sample matrices. By comparing with pre-capillary formation of affinity complexes between IgG and protein A, post-capillary affinity detection clearly exhibit greater resolving power for examining IgG microheterogeneity. Affinity complex formation prior to CZE analysis, however, has the advantage of lower detection limits. Detection limits suffer with post-capillary affinity detection because of the high fluorescence background contributed by the fluorescently labeled protein A in the post-capillary reactor, and the need to determine a small change in the background level upon complex formation.

Post-capillary reaction detection in capillary electrophoresis based on the streptavidin-biotin interaction. Optimization and application to single cell analysis

A class-selective post-capillary reaction detection method for capillary electrophoresis is described in which a streptavidin-fluorescein isothiocyanate (streptavidin-FITC) conjugate is used to detect biotin moieties. The selective binding of biotin moieties to the streptavidin-FITC conjugate causes an enhancement of fluorescence proportional to the concentration of biotin present. After capillary electrophoresis the separated analytes react with streptavidin-FITC in a coaxial reactor and are then detected either by a benchtop spectrofluorometer (2.5 microM detection limit) or by an epi-fluorescence microscope (1 x 10(-7) M detection limit). The method is used to examine biotinylated species in a crude mammalian cell lysate which was found to contain 83+/-3 fmol in 3600 cell volumes. In addition, it is used to examine the uptake of biotin by individual sea urchin oocytes. The results indicate that, in the oocytes, biocytin is the prevalent form of biotin and its concentration varies widely between cells (mean=2+/-2 microM).

Use of a partial-filling technique in affinity capillary electrophoresis for determining binding constants of ligands to receptors

This work evaluates the concept of a partial-filling technique in affinity capillary electrophoresis (ACE) using two model systems: vancomycin from Streptomyces orientalis and carbonic anhydrase B (CAB, EC 4.2.1.1). In this technique the capillary is first partially-filled with ligand followed by a sample of receptor and non-interacting standard and electrophoresed. Analysis of the change in the mobility ratio, M, of the receptor, relative to the non-interacting standard, as a function of the concentration of the ligand, yields a value for the binding constant. These values agree well with those estimated using other binding and ACE techniques. Data demonstrating the quantitative potential of this method is presented.

Post-column derivatization for fluorescence and chemiluminescence detection in capillary electrophoresis

Instrumental developments and applications of post-column derivatization for fluorescence and chemiluminescence detection in capillary electrophoresis (CE) are reviewed. Various systems to merge the reagent solution with the separation medium have been developed, including coaxial capillary reactors, gap reactors and free solution or end-column systems. For all reactor types the geometry of the system, as well as the method to propel the reaction mixture (by pressure or by voltage) appeared to be critical to preserve the separation efficiency. Plate numbers of over 100,000 could be realised with different reactors. The strict requirements on the rate of post-column derivatization reactions to be applied in CE limit the number of different reagents that have been used. For fluorescence detection, with laser or lamps as the excitation source, so far mainly o-phthalaldehyde and its naphthalene analogue have been used as reagent. Derivatization systems that are based on complexation reactions also showed good promise for application in CE. Detection limits could be obtained that were comparable to those obtained after pre-column derivatization. Various reagents for chemiluminescence detection (e.g. the luminol and peroxyoxalate systems) have been studied. The often complicated chemistry involved made application of these reagents in CE even more difficult. Results obtained so far, in terms of sensitivity, have not been up to expectation, with detection limits usually in the order of micromol l(-1).

On-line post-capillary affinity detection of immunoglobulin G subclasses and monoclonal antibody variants for capillary electrophoresis

Human immunoglobulin G (IgG) subclasses each play a unique role in an immune response to foreign antigens. Three of the human IgG subclasses have distinct electrophoretic mobilities and are resolved by capillary zone electrophoresis (CZE). A post-capillary reactor is constructed to allow on-line addition of fragment B (of protein A)-fluorescein to form affinity complexes with separated IgG subclasses. Post-capillary affinity detection provides selective identification of human IgG subclasses and illustrates the effect of affinity binding constant on detection sensitivity. Additionally, post-capillary affinity detection for CZE facilitates rapid and selective heterogeneity analysis of mouse monoclonal anti-(human-alpha 1-antitrypsin) and anti-human follicle stimulating hormone in complex sample matrices. A constant mobility difference is observed between the antibody isoforms, likely the result of charge heterogeneity due to deamination, degradation or variation in sialic acid content.

Affinity capillary electrophoresis

The application of affinity capillary electrophoresis (ACE) to the study of molecular interactions is reviewed. ACE appears to be a sensitive, versatile and convenient tool to obtain reliable data on binding constants and stoichiometries of interacting systems using the Hummel-Dreyer method and variants thereof. A powerful feature is the possibility to analyze simultaneously the affinity of a large number of compounds for the same ligand, making it a promising tool for the screening of large combinatorial libraries.