Optimization of tandem columns for the isomer and enantiomer selective separation of toxaphenes

Dynamic Control of Gas Chromatographic Selectivity during the Analysis of Organic Bases

A novel method for controlling selectivity during the gas chromatographic (GC) analysis of organic bases is presented. The technique employs tandem stainless steel capillary columns, each coated with a pH adjusted water stationary phase. The first is a 0.5 m trap column coated with a pH 2.2 phase, while the second is an 11 m analytical column coated with a pH 11.4 phase. The first column traps basic analytes from injected samples, while the remaining components continue to elute and separate. Then, upon injection of a volatile aqueous ammonia solution, the basic analytes are released as desired to the analytical column where they are separated and analyzed. Separations are quite reproducible and demonstrate an average RSD of 1.2% for analyte retention times in consecutive trials. Using this approach, the retention of such analytes can be readily controlled and they can be held in the system for periods of up to 1 h without significant erosion of peak shape. As such, it can provide considerable control over analyte selectivity and resolution compared to conventional separations. Further, by employing a third conventional GC column to the series, both traditional hydrocarbon and enhanced organic base separations can be performed. The method is applied to the analysis of complex mixtures, such as gasoline, and much less matrix interference is observed as a result. The findings indicate that this approach could be a useful alternative for analyzing such samples.

Advances in the environmental analysis of polychlorinated naphthalenes and toxaphene

Recent advances in the analysis of the chlorinated environmental pollutants polychlorinated naphthalenes (PCNs) and toxaphene are highlighted in this review. Method improvements have been realized for PCNs over the past decade in isomer-specific quantification, peak resolution, and the availability of mass-labeled standards. Toxaphene method advancements include the application of new capillary gas chromatographic (GC) stationary phases, mass spectrometry (MS), especially ion trap MS, and the availability of Standard Reference Materials that are value-assigned for total toxaphene and selected congener concentrations. An area of promise for the separation of complex mixtures such as PCNs and toxaphene is the development of multidimensional GC techniques. The need for continued advancements and efficiencies in the analysis of contaminants such as PCNs and toxaphene remains as monitoring requirements for these compound classes are established under international agreements.

Separation of toxaphene by high resolution gas chromatography

A summary is given about the separation of toxaphenes by high resolution gas chromatography (HRGC). The suitability of different stationary phases for isomer and/or enantiomer-selective separations is compared. Multidimensional and tandem techniques are also presented. In addition, problems caused by thermal degradation in the injector and on the column are addressed. Furthermore, a brief survey is included about detection methods such as electron capture detection and different mass spectrometric methods.