Titanium made the EDO way should see prices drop

Thermal Properties of TiO₂NP/CNT/LDPE Hybrid Nanocomposite Films

This work aims to investigate the effect of hybrid filler concentration on the thermal stability of low-density polyethylene (LDPE) matrices. LDPE-based composite films were synthesized by melt mixing, followed by compression molding, to study the influence of titanium oxide nanoparticles (TONPs) and/or multi-walled carbon nanotubes (CNTs) on the thermal properties of LDPE matrices. Fourier transform infrared (FTIR) spectroscopy confirmed the slight increase in the band intensities after TONP addition and a remarkable surge after the incorporation of CNTs. The value of crystallization temperature (Tc) was not modified after incorporating TONPs, while an enhancement was observed after adding the hybrid fillers. The melting temperature (Tm) was not changed after introducing the CNTs and CNT/TONP hybrid fillers. The percentage crystallinity (Xc %) was increased by 4% and 6%, after incorporating 1 wt % and 3 wt % CNTs, respectively. The TONP incorporation did not modify the Xc %. Moreover, thermal gravimetric analysis (TGA) thermograms confirmed the increased thermal stability after introducing CNTs and hybrid fillers compared to TONP incorporation.

Mechanical examinations on dental implants with porous titanium coating

Due to its good biocompatibility, porous titanium is an interesting material for biomedical applications. Bone tissue can grow inside the porous structure and maintain a long and stable connection between the implant and the human bone. To investigate its long term stability, the mechanical behavior of porous titanium was tested under static and dynamic conditions and was compared to human bone tissue. A promising application of this material is the coating of dental implants. A manufacturing technique was developed and implants were produced. These implants were fatigue tested according to modified ISO 14801 and the micro structural change was examined. The fatigue test was statically modeled using finite element analysis (FEA). The results show that the implants resist a continuous load which is comparable to the loading conditions in the human jaw. The experiments show that the porous titanium has bone-like mechanical properties. Additionally the porous titanium shows an anisotropic behavior of its mechanical properties depending on the alignment of the pores. Finally, other potential applications of porous titanium are outlined.