Bone growth factors

Challenges and Innovations in Alveolar Bone Regeneration: A Narrative Review on Materials, Techniques, Clinical Outcomes, and Future Directions

This review explores the recent advancements and ongoing challenges in regenerating alveolar bone, which is essential for dental implants and periodontal health. It examines traditional techniques like guided bone regeneration and bone grafting, alongside newer methods such as stem cell therapy, gene therapy, and 3D bioprinting. Each approach is considered for its strengths in supporting bone growth and integration, especially in cases where complex bone defects make regeneration difficult. This review also looks at different biomaterials, from bioactive scaffolds to nanomaterials, assessing how well they encourage cell growth and healing. Personalized treatments, like customized 3D-printed scaffolds, show promise in enhancing bone formation and tissue compatibility. Additionally, signaling molecules, like bone morphogenetic proteins, play a crucial role in guiding the process of bone formation and remodeling. Despite these advances, challenges remain-particularly with severe bone loss and with refining biomaterials for more reliable, long-term outcomes. This review proposes combining advanced materials, regenerative technologies, and personalized approaches to achieve more effective and consistent outcomes in oral and maxillofacial surgery.

Enhancing Bone Formation Through bFGF-Loaded Mesenchymal Stromal Cell Spheroids During Fracture Healing in Mice

This study aimed to evaluate the osteogenic potential of mesenchymal stromal cell (MSC) spheroids combined with the basic fibroblast growth factor (bFGF) in a mouse femur fracture model. To begin, MSC spheroids were generated, and the expression of key trophic factors (bFGF Bmp2, and Vegfa) was assessed using quantitative PCR (qPCR). A binding assay confirmed the interaction between the bFGF and the spheroids' extracellular matrix. The spheroid cultures significantly upregulated bFGF, Bmp2, and Vegfa expression compared to the monolayers (p < 0.001), and the binding assay demonstrated effective bFGF binding to the MSC spheroids. Following these in vitro assessments, the mice were divided into five groups for the in vivo study: (1) no treatment (control), (2) spheroids alone, (3) bFGF alone, (4) bFGF-loaded spheroids (bFGF-spheroids), and (5) non-viable (frozen) bFGF-loaded spheroids (bFGF-dSpheroids). Bone formation was analyzed by a micro-CT, measuring the bone volume (BV) and bone mineral content (BMC) of the mice four weeks post-fracture. A high dose of the bFGF (10 µg) significantly promoted bone formation regardless of the presence of spheroids, as evidenced by the increases in BV (bFGF, p = 0.010; bFGF-spheroids, p = 0.006; bFGF-dSpheroids, p = 0.032) and BMC (bFGF, p = 0.023; bFGF-spheroids, p = 0.004; bFGF-dSpheroids, p = 0.014), compared to the controls. In contrast, a low dose of the bFGF (1 µg) combined with the MSC spheroids significantly increased BV and BMC compared to the control (BV, p = 0.012; BMC, p = 0.015), bFGF alone (BV, p = 0.012; BMC, p = 0.008), and spheroid (BV, p < 0.001; BMC, p < 0.001) groups. A low dose of the bFGF alone did not significantly promote bone formation (p > 0.05). The non-viable (frozen) spheroids loaded with a low dose of the bFGF resulted in a higher BV and BMC compared to the spheroids alone (BV, p = 0.003; BMC, p = 0.017), though the effect was less pronounced than in the viable spheroids. These findings demonstrate the synergistic effect of the bFGF and MSC spheroids on bone regeneration. The increased expression of the BMP-2 and VEGF observed in the initial experiments, coupled with the enhanced bone formation in vivo, highlight the therapeutic potential of this combination. Future studies will aim to elucidate the underlying molecular mechanisms and assess the long-term outcomes for bone repair strategies.

Comparison In Vitro Study on the Interface between Skin and Bone Cell Cultures and Microporous Titanium Samples Manufactured with 3D Printing Technology Versus Sintered Samples

Percutaneous implants osseointegrated into the residuum of a person with limb amputation need to provide mechanical stability and protection against infections. Although significant progress has been made in the biointegration of percutaneous implants, the problem of forming a reliable natural barrier at the level of the surface of the implant and the skin and bone tissues remains unresolved. The use of a microporous implant structure incorporated into the Skin and Bone Integrated Pylon (SBIP) should address the issue by allowing soft and bone tissues to grow directly into the implant structure itself, which, in turn, should form a reliable barrier to infections and support strong osseointegration. To evaluate biological interactions between dermal fibroblasts and MC3T3-E1 osteoblasts in vitro, small titanium discs (with varying pore sizes and volume fractions to achieve deep porosity) were fabricated via 3D printing and sintering. The cell viability MTT assay demonstrated low cytotoxicity for cells co-cultured in the pores of the 3D-printed and sintered Ti samples during the 14-day follow-up period. A subsequent Quantitative Real-Time Polymerase Chain Reaction (RT-PCR) analysis of the relative gene expression of biomarkers that are associated with cell adhesion (α2, α5, αV, and β1 integrins) and extracellular matrix components (fibronectin, vitronectin, type I collagen) demonstrated that micropore sizes ranging from 200 to 500 µm of the 3D printed and sintered Ti discs were favorable for dermal fibroblast adhesion. For example, for representative 3D-printed Ti sample S6 at 72 h the values were 4.71 ± 0.08 (α2 integrin), 4.96 ± 0.08 (α5 integrin), 4.71 ± 0.08 (αV integrin), and 1.87 ± 0.12 (β1 integrin). In contrast, Ti discs with pore sizes ranging from 400 to 800 µm demonstrated the best results (in terms of marker expression related to osteogenic differentiation, including osteopontin, osteonectin, osteocalcin, TGF-β1, and SMAD4) for MC3T3-E1 cells. For example, for the representative 3D sample S4 on day 14, the marker levels were 11.19 ± 0.77 (osteopontin), 7.15 ± 0.29 (osteonectin), and 6.08 ± 0.12 (osteocalcin), while for sintered samples the levels of markers constituted 5.85 ± 0.4 (osteopontin), 4.45 ± 0.36 (osteonectin), and 4.46 ± 0.3 (osteocalcin). In conclusion, the data obtained show the high biointegrative properties of porous titanium structures, while the ability to implement several pore options in one structure using 3D printing makes it possible to create personalized implants for the best one-time integration with both skin and bone tissues.

Bone Regeneration Capabilities of Scaffolds Containing Chitosan and Nanometric Hydroxyapatite-Systematic Review Based on In Vivo Examinations

In this systematic review, the authors aimed to investigate the state of knowledge on in vivo evaluations of chitosan and nanometric hydroxyapatite (nanohydroxyapatite, nHAp) scaffolds for bone-tissue regeneration. In March 2024, an electronic search was systematically conducted across the PubMed, Cochrane, and Web of Science databases using the keywords (hydroxyapatite) AND (chitosan) AND (scaffold) AND (biomimetic). Methodologically, the systematic review followed the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) protocol to the letter. Initially, a total of 375 studies were screened, and 164 duplicates were removed. A further 188 articles were excluded because they did not correspond to the predefined topics, and an additional 3 articles were eliminated due to the inability to obtain the full text. The final compilation included 20 studies. All publications indicated a potential beneficial effect of the scaffolds in in vivo bone defect repair. A beneficial effect of hydroxyapatite as a scaffold component was observed in 16 studies, including greater mechanical resistance, cellular differentiation, and enhanced bone damage regeneration. The addition of chitosan and apatite ceramics, which combined the strengths of both materials, had the potential to become a useful bone-tissue engineering material.

Bioactive Materials for Bone Regeneration: Biomolecules and Delivery Systems

Novel tissue regeneration strategies are constantly being developed worldwide. Research on bone regeneration is noteworthy, as many promising new approaches have been documented with novel strategies currently under investigation. Innovative biomaterials that allow the coordinated and well-controlled repair of bone fractures and bone loss are being designed to reduce the need for autologous or allogeneic bone grafts eventually. The current engineering technologies permit the construction of synthetic, complex, biomimetic biomaterials with properties nearly as good as those of natural bone with good biocompatibility. To ensure that all these requirements meet, bioactive molecules are coupled to structural scaffolding constituents to form a final product with the desired physical, chemical, and biological properties. Bioactive molecules that have been used to promote bone regeneration include protein growth factors, peptides, amino acids, hormones, lipids, and flavonoids. Various strategies have been adapted to investigate the coupling of bioactive molecules with scaffolding materials to sustain activity and allow controlled release. The current manuscript is a thorough survey of the strategies that have been exploited for the delivery of biomolecules for bone regeneration purposes, from choosing the bioactive molecule to selecting the optimal strategy to synthesize the scaffold and assessing the advantages and disadvantages of various delivery strategies.

HSP70 inhibitors upregulate prostaglandin E1-induced synthesis of interleukin-6 in osteoblasts

Interleukin-6 (IL-6) is a pro-inflammatory and bone-resorptive cytokine that also regulates bone formation. We previously showed that prostaglandin E1 (PGE1) induces the synthesis of IL-6 by activating p44/p42 mitogen-activated protein kinase (MAPK), stress-activated protein kinase/c-Jun N-terminal kinase (SAPK/JNK), and p38 MAPK in osteoblast-like MC3T3-E1 cells. In the present study, we investigated whether heat shock protein 70 (HSP70), a molecular chaperone that coordinates protein folding and homeostasis, affects PGE1-stimulated IL-6 synthesis in MC3T3-E1 cells through the MAPK activation. The osteoblast-like MC3T3-E1 cells were treated with HSP70 inhibitors-VER-155008 and YM-08-, PD98059, SB203580 or SP600125 and then stimulated with PGE1. IL-6 synthesis was evaluated using an IL-6 enzyme-linked immunosorbent assay kit. IL-6 mRNA expression was measured by real-time RT-PCR. The phosphorylation of p38 MAPK was evaluated by Western blotting. We found that VER-155008, an HSP70 inhibitor, enhanced the PGE1-stimulated IL-6 release and IL-6 mRNA expression. YM-08, another HSP70 inhibitor, also enhanced PGE1-stimulated IL-6 release. PD98059, a p44/p42 MAPK inhibitor, and SP600125, a SAPK/JNK inhibitor, upregulated PGE1-stimulated IL-6 release. On the other hand, SB203580, a p38 MAPK inhibitor, suppressed PGE1-stimulated IL-6 release. YM-08 stimulated the PGE1-induced phosphorylation of p38 MAPK. SB203580 suppressed the amplification by YM-08 of the PGE1-stimulated IL-6 release. Our results suggest that HSP70 inhibitors upregulate the PGE1-stimulated IL-6 synthesis through p38 MAPK in osteoblasts and therefore affect bone remodeling.

The role of Platelet Rich Plasma and other orthobiologics in bone healing and fracture management: A systematic review

BACKGROUND

Treatment of large bone defects and fracture healing complications (delayed and non-union) presents a substantial challenge for orthopaedic surgeons. Given that bone healing requires mechanical stability as well as a favourable biological microenvironment, orthobiologics such as Platelet-Rich Plasma (PRP) may have a significant clinical role to play.

AIMS

To perform a systematic review of the available literature to assess the clinical effect of PRP, with or without other orthobiologics, on bone healing.

METHOD

Two independent reviewers performed the literature search based on the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. Clinical studies of any evidence, assessing effect of PRP with or without other orthobiologics on bone healing, were included. A qualitative analysis was carried out on the clinical and radiological outcomes reported.

RESULT

27 articles with 1631 patients (mean age = 43.56, 57.1% male, mean follow-up = 17.27 months) were included in the qualitative. Of the 27 studies, 13 dealt with fracture complications (delayed or non-unions), 7 with acute fracture healing, 4 with tibial osteotomies and lengthening procedures and 3 with lumbar spine pathology. 18/27 studies showed a clinical benefit of PRP, 8/27 showed no significant effect, and 1/27 showed a worse outcome with PRP.

CONCLUSION

Our review suggests PRP may play a clinical role in bone healing but further randomised controlled trials (RCTs) using standardised outcomes should be performed to establish its efficacy.

Growth Factors, Carrier Materials, and Bone Repair

This chapter provides an overview of the growth factors active in bone regeneration and healing. Both normal and impaired bone healing are discussed, with a focus on the spatiotemporal activity of the various growth factors known to be involved in the healing response. The review highlights the activities of most important growth factors impacting bone regeneration, with a particular emphasis on those being pursued for clinical translation or which have already been marketed as components of bone regenerative materials. Current approaches the use of bone grafts in clinical settings of bone repair (including bone grafts) are summarized, and carrier systems (scaffolds) for bone tissue engineering via localized growth factor delivery are reviewed. The chapter concludes with a consideration of how bone repair might be improved in the future.

Fabrication of Biomolecule-Loaded Composite Scaffolds Carried by Extracellular Matrix Hydrogel

Fabrication of multifunctional scaffolds with biomimicking physical and biological signals play an important role in enhancing tissue regeneration. Multifunctional features come from the composite scaffold with various bioactive molecules. However, simple, biocompatible, and controllable hybridization strategy is still lacking. In this study, we leverage naturally derived extracellular matrix (ECM) as chemically controllable hydrogel carrier to effectively load functional biomolecules. The use of ECM hydrogel takes advantage of both native functionality of ECM components and tunability of hydrogel in controlling release of loaded molecules. As a proof of concept, porous acellular bone scaffold was selected as the solid pristine scaffold to be composited with BMP-2 and VEGF, which are loaded by spinal cord-derived ECM (SC-ECM) hydrogel. Crosslinking degree of SC-ECM hydrogel is tuned by changing genipin concentration, which renders the control over release kinetics of BMP-2 and VEGF. The mechanical strength of scaffold maintained after hybridization and is not significantly decreased in wet condition. In vitro evaluations of scaffolds cocultured with osteoblasts and mesenchymal stem cells (MSCs) demonstrate the biocompatible and bioactive features resulting from the composite scaffolds. Evidenced by alkaline phosphatase test, immunofluorescence, and real-time polymerase chain reaction, differentiation of MSCs towards osteoblast lineage is significantly enhanced by composite scaffolds. Therefore, our strategy in fabricating composite scaffold enabled by biomolecule-loaded ECM hydrogel holds great promise in regenerating diverse tissue types by appropriate combinations of solid pristine scaffolds, ECM, and bioactive molecules. Impact statement We developed a bioactive molecule (e.g., growth factor, protein) loading method using extracellular matrix hydrogel as a carrier. It brings a new strategy to fabricate composite scaffolds with unique biofunctions.

Acceleration of Bone Healing by In Situ-Forming Dextran-Tyramine Conjugates Containing Basic Fibroblast Growth Factor in Mice

An enzymatic crosslinking strategy using hydrogen peroxide (H₂O₂) and horseradish peroxidase (HRP) has been receiving increasing attention for use with in situ-formed hydrogels (IFHs). Several studies have reported the application of IFHs in cell delivery and tissue engineering. IFHs may also be ideal carrier materials for bone repair, although their potential as a carrier for basic fibroblast growth factor (bFGF) has yet to be evaluated. Here, we examined the effect of an IFH made of dextran (Dex)-tyramine (TA) conjugates (IFH-Dex-TA) containing bFGF in promoting bone formation in a fracture model in mice. Immediately following a fracture procedure, animals either received no treatment (control) or an injection of IFH-Dex-TA/phosphate-buffered saline (IFH-Dex-TA/PBS) or IFH-Dex-TA containing 1 μg bFGF (IFH-Dex-TA/bFGF) into the fracture site (n=10, each treatment). Fracture sites injected with IFH-Dex-TA/bFGF showed significantly greater bone volume, mineral content, and bone union than sites receiving no treatment or treated with IFH-Dex-TA/PBS alone (each n=10). This Dex-TA gel may be an effective drug delivery system for optimizing bFGF therapy.

Incretin accelerates platelet-derived growth factor-BB-induced osteoblast migration via protein kinase A: The upregulation of p38 MAP kinase

Incretins, including glucagon-like peptide-1 (GLP-1) and glucose-dependent insulinotropic polypeptide (GIP), secreted from enteroendocrine cells after food ingestion, are currently recognized to regulate glucose metabolism through insulin secretion. We previously demonstrated that platelet-derived growth factor-BB (PDGF-BB) induces the migration of osteoblast-like MC3T3-E1 cells through mitogen-activated protein (MAP) kinases, including p38 MAP kinase. In the present study, we investigated whether or not incretins affect the osteoblast migration. The PDGF-BB-induced cell migration was significantly reinforced by GLP-1, GIP or cAMP analogues in MC3T3-E1 cells and normal human osteoblasts. The upregulated migration by GLP-1 or cAMP analogues was suppressed by H89, an inhibitor of protein kinase A. The amplification by GLP-1 of migration induced by PDGF-BB was almost completely reduced by SB203580, a p38 MAP kinase inhibitor in MC3T3-E1 cells and normal human osteoblasts. In addition, GIP markedly strengthened the PDGF-BB-induced phosphorylation of p38 MAP kinase. Exendin-4, a GLP-1 analogue, induced Rho A expression and its translocation from cytoplasm to plasma membranes in osteoblasts at the epiphyseal lines of developing mouse femurs in vivo. These results strongly suggest that incretins accelerates the PDGF-BB-induced migration of osteoblasts via protein kinase A, and the up-regulation of p38 MAP kinase is involved in this acceleration. Our findings may highlight the novel potential of incretins to bone physiology and therapeutic strategy against bone repair.

Strontium stimulates alkaline phosphatase and bone morphogenetic protein-4 expression in rat chondrocytes cultured in vitro

The trace element strontium has a significant impact on cartilage metabolism. However, the direct effects of strontium on alkaline phosphatase (ALP), a marker of bone growth, and bone morphogenetic protein-4 (BMP-4), which plays a key role in the regulation of bone and cartilage development, are not entirely clear. In order to understand the mechanisms involved in these processes, the chondrocytes were isolated from Wistar rat articular cartilage by enzymatic digestion and cultured under standard conditions. They were then treated with strontium at 0.5, 1.0, 2.0, 5.0, 20.0 and 100.0 μg/mL for 72 h. The mRNA abundance and protein expression levels of ALP and BMP-4 were measured using real-time polymerase chain reaction (real-time PCR) and Western blot analysis. The results showed that the levels of expression of ALP and BMP-4 in chondrocytes increased as the concentration of strontium increased relative to the control group, and the difference became significant at 1.0 μg/mL strontium (P<0.05). These results indicated that strontium could be involved in cartilage development via regulating ALP and BMP-4 expression.

Concentrated growth factor promotes proliferation, osteogenic differentiation, and angiogenic potential of rabbit periosteum-derived cells in vitro

OBJECTIVE

The aim of this research is to investigate the effects of concentrated growth factor (CGF) on the proliferation, osteogenic differentiation, and angiogenic potential of rabbit periosteum-derived cells (PDCs) in vitro.

METHODS

PDCs were isolated from the femoral and tibial periosteum of rabbits and cultured with or without CGF membranes or CGF conditioned media. Scanning electron microscopy (SEM) was used for the structural characterization. Cell Counting Kit-8 assay was used to measure cell proliferation. Alkaline phosphatase (ALP) activity of PDCs was also measured. Immunohistochemistry was used to detect the expression of CD34. Enzyme-linked immunosorbent assay (ELISA), quantitative real-time PCR (qPCR), and Western blot were used to evaluate the secretion and expression levels of osteogenic differentiation markers (bone morphogenetic protein-2, type I collagen, osteocalcin) and angiogenesis markers (vascular endothelial growth factor, basic fibroblast growth factor) in supernatants and PDCs at days 3, 7, 14, and 21.

RESULTS

The SEM analysis showed a dense three-dimensional fibrin network in CGF, and CGF membranes were covered by PDCs with elongated or polygonal morphological features. Compared with the control group, CGF significantly promoted the proliferation of PDCs during the experimental period (p < 0.05). Immunohistochemistry revealed that PDCs were dispersedly distributed among the CGF substrates, and CD34-positive cells were also present. Moreover, CGF significantly increased the ALP activity and upregulated the expression and secretion of osteogenic differentiation and angiogenesis markers in PDCs at days 3, 7, 14, and 21 (p < 0.05).

CONCLUSION

CGF can increase the proliferation and promote the osteogenic differentiation and angiogenic potential of PDCs in vitro. These results indicate that CGF can be used as a new therapeutic means for biotechnological and clinical applications.

Optimal satellite rod constructs to mitigate rod failure following pedicle subtraction osteotomy (PSO): a finite element study

BACKGROUND CONTEXT

Pedicle subtraction osteotomy (PSO) is a challenging restoration technique for sagittal imbalance and is associated with significant complications. One of the major complications is rod fracture and there exists a need for a biomechanical assessment of this complication for various instrumentation configurations.

PURPOSE

To evaluate and compare the global range of motion (ROM), rod stress distribution, and the forces on the pedicle subtraction site in various instrumentation configurations using finite element analysis.

STUDY DESIGN/SETTING

A computational biomechanical analysis.

METHODS

A previously validated osseoligamentous three-dimensional spinopelvic finite element model (T10-pelvis) was used to develop a 30° PSO at the L3 level. In addition to the standard bilateral cobalt chromium primary rod instrumentation of the PSO model, various multirod configurations including constructs with medially, laterally, and posteriorly affixed satellite rods and the short-rod technique were assessed in spinal physiological motions. T10-S1 global ROM, maximum von Mises stress on the rods and at the PSO level, factor of safety (yield stress of the rod material/maximum actual stress in the rod) and the load acting across the PSO site were compared between various instrumentation configurations. The higher the factor of safety the lesser the chances of rod failure.

RESULTS

Among all multirod constructs, posteriorly affixed satellite rod construct showed the greatest motion reduction compared to the standard bilateral rod configuration followed by medially and laterally affixed satellite rod constructs. Compared to the standard bilateral rod configuration, recessed short-rod technique resulted in 4% to 49% reduction in T10-S1 ROM recorded in extension and lateral bending motions, respectively, while the axial rotation motion increased by approximately 31%. Considering the maximum stress values on the rods, the recessed short-rod technique showed the greatest factor of safety (FOS = 4.1) followed by posteriorly (FOS = 3.9), medially (FOS = 3), laterally affixed satellite rod constructs (FOS = 2.8), and finally the standard bilateral rod construct (FOS = 2.7). By adding satellite rods, the maximum von Mises stress at the PSO level of the rods also reduced significantly and at this level resulted in the greatest FOS in the posteriorly affixed satellite rod construct. Compared to the standard bilateral rod construct, the load magnitude acting on the osteotomy site decreased by 11%, 16%, and 37% in the laterally, medially, and posteriorly affixed satellite rod constructs, respectively, and did not change with the short-rod technique.

CONCLUSIONS

Adding satellite rods increases the rigidity of the construct, which results in an increase in the stability and the reduction of the global ROM. Additionally, having satellite rods reduces the stress on the primary rods at the PSO level and shifts the stresses from this PSO region to areas adjacent to the side-by-side connectors. The data suggest a significant benefit in supplementing medial over lateral satellite rods at the PSO by reducing stress on the primary rods. Except the recessed short-rod technique, all other multirod constructs decrease the magnitude of the load acting across the osteotomy region, which could cause a delayed or non-union at the PSO site.

CLINICAL SIGNIFICANCE

The study evaluates the mechanical performance of various satellite rod instrumentation configurations following PSO to predict the risk factors for rod fracture and thereby mitigate the rate of clinically relevant failures.

Repression of IGF-I-induced osteoblast migration by (-)-epigallocatechin gallate through p44/p42 MAP kinase signaling

Polyphenolic compounds in beverages may have benefits in the prevention of osteoporosis. It has been demonstrated previously that insulin-like growth factor-I (IGF-I) could stimulate the migration of osteoblasts. In the present study, it was investigated whether chlorogenic acid, a major polyphenol in coffee, and (-)-epigallocatechin gallate (EGCG), a major polyphenol in green tea, could affect this IGF-I-stimulated migration of osteoblast-like MC3T3-E1 cells. The IGF-I-stimulated osteoblast migration, evaluated by Transwell cell migration and wound-healing assays, was inhibited by EGCG but not chlorogenic acid. IGF-I induced the phosphorylation of p44/p42 mitogen-activated protein (MAP) kinase, p70 S6 kinase and Akt. The IGF-I-induced migration was suppressed by PD98059, a MAP kinase kinase 1/2 inhibitor, and deguelin, an Akt inhibitor, but not rapamycin, an inhibitor of the upstream kinase of p70 S6 kinase (mammalian target of rapamycin). EGCG attenuated the IGF-I-induced phosphorylation of p44/p42 MAP kinase but not Akt. Taken together, the present results suggest that EGCG inhibits IGF-I-induced osteoblast migration via p44/p42 MAP kinase.

(-)-Epigallocatechin gallate but not chlorogenic acid suppresses EGF-stimulated migration of osteoblasts via attenuation of p38 MAPK activity

Phenolic compounds provide health benefits in humans. A previous study by our group has indicated that the epidermal growth factor (EGF)‑induced migration of osteoblast‑like MC3T3‑E1 cells is mediated by the phosphorylation of p44/p42 mitogen‑activated protein (MAPK), p38 MAPK, stress‑activated protein kinase (SAPK)/c‑Jun N‑terminal kinase (JNK) and Akt, and that resveratrol, a major polyphenol in grape skin, suppresses the EGF‑induced migration by attenuating Akt and SAPK/JNK activation. In the present study, the effects of chlorogenic acid, a major phenolic acid in coffee, and (‑)‑epigallocatechin gallate (EGCG), a major flavonoid in green tea, on the EGF‑induced migration of MC3T3‑E1 cells were investigated. EGCG significantly reduced the EGF‑induced migration as evaluated by a Transwell migration assay and by a wound healing assay. However, chlorogenic acid failed to affect the EGF‑induced migration. The phosphorylation of p38 MAPK induced by EGF was significantly suppressed by EGCG; however, the EGF‑induced phosphorylation of p44/p42 MAP kinase, SAPK/JNK or Akt was not affected by EGCG. These results suggest that EGCG, but not chlorogenic acid, suppresses EGF‑induced osteoblast migration through inhibiting p38 MAPK activation.

Recent advances in gene-enhanced bone tissue engineering

The loss of bone tissue represents a critical clinical condition that is frequently faced by surgeons. Substantial progress has been made in the area of bone research, providing insight into the biology of bone under physiological and pathological conditions, as well as tools for the stimulation of bone regeneration. The present review discusses recent advances in the field of gene-enhanced bone tissue engineering. Gene transfer strategies have emerged as highly effective tissue engineering approaches for supporting the repair of the musculoskeletal system. By contrast to treatment with recombinant proteins, genetically engineered cells can release growth factors at the site of injury over extended periods of time. Of particular interest are the expedited technologies that can be applied during a single surgical procedure in a cost-effective manner, allowing translation from bench to bedside. Several promising methods based on the intra-operative genetic manipulation of autologous cells or tissue fragments have been developed in preclinical studies. Moreover, gene therapy for bone regeneration has entered the clinical stage with clinical trials for the repair of alveolar bone. Current trends in gene-enhanced bone engineering are also discussed with respect to the movement of the field towards expedited, translational approaches. It is possible that gene-enhanced bone tissue engineering will become a clinical reality within the next few years.

Basic Fibroblast Growth Factor Fused with Tandem Collagen-Binding Domains from Clostridium histolyticum Collagenase ColG Increases Bone Formation

Basic fibroblast growth factor 2 (bFGF) accelerates bone formation during fracture healing. Because the efficacy of bFGF decreases rapidly following its diffusion from fracture sites, however, repeated dosing is required to ensure a sustained therapeutic effect. We previously developed a fusion protein comprising bFGF, a polycystic kidney disease domain (PKD; s2b), and collagen-binding domain (CBD; s3) sourced from the Clostridium histolyticum class II collagenase, ColH, and reported that the combination of this fusion protein with a collagen-like peptide, poly(Pro-Hyp-Gly)₁₀, induced mesenchymal cell proliferation and callus formation at fracture sites. In addition, C. histolyticum produces class I collagenase (ColG) with tandem CBDs (s3a and s3b) at the C-terminus. We therefore hypothesized that a bFGF fusion protein containing ColG-derived tandem CBDs (s3a and s3b) would show enhanced collagen-binding activity, leading to improved bone formation. Here, we examined the binding affinity of four collagen anchors derived from the two clostridial collagenases to H-Gly-Pro-Arg-Gly-(Pro-Hyp-Gly)₁₂-NH₂, a collagenous peptide, by surface plasmon resonance and found that tandem CBDs (s3a-s3b) have the highest affinity for the collagenous peptide. We also constructed four fusion proteins consisting of bFGF and s3 (bFGF-s3), s2b-s3b (bFGF-s2b-s3), s3b (bFGF-s3b), and s3a-s3b (bFGF-s3a-s3b) and compared their biological activities to those of a previous fusion construct (bFGF-s2b-s3) using a cell proliferation assay in vitro and a mouse femoral fracture model in vivo. Among these CB-bFGFs, bFGF-s3a-s3b showed the highest capacity to induce mesenchymal cell proliferation and callus formation in the mice fracture model. The poly(Pro-Hyp-Gly)₁₀/bFGF-s3a-s3b construct may therefore have the potential to promote bone formation in clinical settings.

Comparative analysis of conventional and biological treatment in healing of bone disease

The healing of Bone tissue consists of a complex process. Hence, we designed our study to evaluate chondrial diseases, which are as they have a very low healing capacity. Seventy two elderly osteoarthritis (OA) and 54-paediatric juvenile idiopathic arthritis (JIA) patients were included. The group was divided as 24 OA patients and 18 JIA patients in each group. Group I received Hyualuronic acid and glucocorticoides. Group II received platelet rich plasma and fibrin glue. Group III received PRP, fibrin glue, and MSC. 40 control patients received only PRP treatment. Out of 72 OA patients 35 (48.6%) male and 37 (51.4%) female with mean age of 48 ± 6.5 years. 64 (88.9%) Patients had pain and swelling. 52 (72.2%) lacked flexibility. 42 (58.3%) had hypertrophy. 28 (38.9%) had less cartilage thickness. 34 (47.2%) were in grade 3, grade 2 has 28 (38.9%) and grade 1 has 10 (13.9%) patients respectively. Among 54 JIA patients 28 (51.9%) male and 26 (48.1%) female patients with mean, age 4.6 ± 3.8 years. 39 (72.2%) had pain and swelling. 32 (59.3%) lacked flexibility. 29 (53.7%) children’s had functional disability. Group I patients showed 30% improvement with no statistical significance (P < 0.21). Group II showed 45% improvement with statistical significance (P < 0.01). In Group III 80%, improvement was observed with statistical significance (P < 0.001). In 40 control patients, 60% improvement was observed. In conclusion, use of these MSC, PRP, and PPP are safe and less cost effective for treating OA and JIA.

Effect of Freeze-Dried Allograft Bone With Human Basic Fibroblast Growth Factor Containing a Collagen-Binding Domain From Clostridium histolyticum Collagenase on Bone Formation After Lumbar Posterolateral Fusion Surgery in Rats

STUDY DESIGN

An experimental study.

OBJECTIVE

To evaluate the effectiveness of freeze-dried bone allograft (FDBA) with basic fibroblast growth factor (bFGF) fused with the polycystic kidney disease domain (PKD) and the collagen-binding domain (CBD) of Clostridium histolyticum collagenase, for the acceleration of lumbar posterolateral fusion in rats.

SUMMARY OF BACKGROUND DATA

Reports indicate bFGF is an effective growth factor with osteogenic potential for promoting bone regeneration, although its efficiency decreases rapidly following its diffusion in body fluid from the host site. We developed a bFGF fusion protein containing the PKD and the CBD of C histolyticum collagenase (bFGF-PKD-CBD), which markedly enhanced bone formation at a relatively low concentration when applied to the surface of rat femurs in a previous study. The potential of this novel protein to accelerate bone fusion in a rat model of lumbar posterolateral fusion has yet to be investigated.

METHODS

Bilateral L4-L5 posterolateral fusions were performed, using 150 mg of FDBA powder per side. A total of 20 male Sprague-Dawley rats weighing 200 to 250 g/each were divided into two groups of 10 rats: FDBA was incubated with either phosphate-buffered saline (control group) or 0.58 nmol bFGF-PKD-CBD (bFGF-PKD-CBD group) before fusion surgery. The effect of bFGF-PKD-CBD was estimated using radiographs, microcomputed tomography, and histology (hematoxylin-eosin and von Kossa staining).

RESULTS

Both grafted bone volume in the posterolateral lesion and the volume of new bone formation on the surface of laminae and spinal processes were significantly higher in the bFGF-PKD-CBD group than in the control group. Histologically, new bone formation and surrounding chondrocytes and fibroblasts were prominent in the bFGF-PKD-CBD group.

CONCLUSION

FDBA infused with bFGF-PKD-CBD may be a promising material for accelerating spinal fusion, and the FDBA-based delivery system for localizing bFGF-PKD-CBD may offer novel therapeutic approaches to augment spinal fusion.

LEVEL OF EVIDENCE

N/A.

Ginkgo Biloba improves bone formation during fracture healing: an experimental study in rats

OBJECTIVES

Ginkgo biloba extract (EGb 761) is a plant extract obtained from the leaves of the G. biloba tree. The aim of this study was to assess the histological and radiological effects of G. biloba extract on fracture healing in an experimental fracture model using rat femurs.

METHODS

Forty-eight female Sprague-Dawley rats (weight: 195-252 g; age: 20 weeks) were used in the study. The rats were randomly divided into six groups (n=8). A transverse fracture was made in the middle of the right femur of each rat and fixed with a Kirschner wire. The G. biloba groups received 60 mg/kg oral G. biloba extract once daily. No medication was given to the control groups. On days 7, 21 and 35, both sets of femurs were evaluated radiologically and histopathologically.

RESULTS

Histological evaluation revealed that the G. biloba groups had significant differences at 21 and 35 days (p<0.05). The G. biloba group showed a significant difference in terms of bone formation on day 21 when compared to the control group (p<0.05).

CONCLUSIONS

This study indicated that the use of G. biloba extract accelerated fracture healing. Both radiological and histological differences were detected, but the histological differences were more remarkable. Level of Evidence I, High Quality Randomized Trial.

Biological Approaches to Bone Regeneration by Gene Therapy

Safe, effective approaches for bone regeneration are needed to reverse bone loss caused by trauma, disease, and tumor resection. Unfortunately, the science of bone regeneration is still in its infancy, with all current or emerging therapies having serious limitations. Unlike current regenerative therapies that use single regenerative factors, the natural processes of bone formation and repair require the coordinated expression of many molecules, including growth factors, bone morphogenetic proteins, and specific transcription factors. As will be developed in this article, future advances in bone regeneration will likely incorporate therapies that mimic critical aspects of these natural biological processes, using the tools of gene therapy and tissue engineering. This review will summarize current knowledge related to normal bone development and fracture repair, and will describe how gene therapy, in combination with tissue engineering, may mimic critical aspects of these natural processes. Current gene therapy approaches for bone regeneration will then be summarized, including recent work where combinatorial gene therapy was used to express groups of molecules that synergistically interacted to stimulate bone regeneration. Last, proposed future directions for this field will be discussed, where regulated gene expression systems will be combined with cells seeded in precise three-dimensional configurations on synthetic scaffolds to control both temporal and spatial distribution of regenerative factors. It is the premise of this article that such approaches will eventually allow us to achieve the ultimate goal of bone tissue engineering: to reconstruct entire bones with associated joints, ligaments, or sutures. Abbreviations used: BMP, bone morphogenetic protein; FGF, fibroblast growth factor; AER, apical ectodermal ridge; ZPA, zone of polarizing activity; PZ, progress zone; SHH, sonic hedgehog; OSX, osterix transcription factor; FGFR, fibroblast growth factor receptor; PMN, polymorphonuclear neutrophil; PDGF, platelet-derived growth factor; IGF, insulin-like growth factor; TGF-β, tumor-derived growth factor β; CAR, coxsackievirus and adenovirus receptor; MLV, murine leukemia virus; HIV, human immunodeficiency virus; AAV, adeno-associated virus; CAT, computer-aided tomography; CMV, cytomegalovirus; GAM, gene-activated matrix; MSC, marrow stromal cell; MDSC, muscle-derived stem cell; VEGF, vascular endothelial growth factor.

Bone healing in 2016

Delayed fracture healing and nonunion occurs in up to 5-10% of all fractures, and can present a challenging clinical scenario for the treating physician. Methods for the enhancement of skeletal repair may benefit patients that are at risk of, or have experienced, delayed healing or nonunion. These methods can be categorized into either physical stimulation therapies or biological therapies. Physical stimulation therapies include electrical stimulation, low-intensity pulsed ultrasonography, or extracorporeal shock wave therapy. Biological therapies can be further classified into local or systemic therapy based on the method of delivery. Local methods include autologous bone marrow, autologous bone graft, fibroblast growth factor-2, platelet-rich plasma, platelet-derived growth factor, and bone morphogenetic proteins. Systemic therapies include parathyroid hormone and bisphosphonates. This article reviews the current applications and supporting evidence for the use of these therapies in the enhancement of fracture healing.

Importance of dual delivery systems for bone tissue engineering

Bone formation is a complex process that requires concerted function of multiple growth factors. For this, it is essential to design a delivery system with the ability to load multiple growth factors in order to mimic the natural microenvironment for bone tissue formation. However, the short half-lives of growth factors, their relatively large size, slow tissue penetration, and high toxicity suggest that conventional routes of administration are unlikely to be effective. Therefore, it seems that using multiple bioactive factors in different delivery systems can develop new strategies for improving bone tissue regeneration. Combination of these factors along with biomaterials that permit tunable release profiles would help to achieve truly spatiotemporal regulation during delivery. This review summarizes the various dual-control release systems that are used for bone tissue engineering.

Heparan sulfate 6-O-sulfotransferase 3 is involved in bone marrow mesenchymal stromal cell osteogenic differentiation‍

The roles of sugar chains such as heparan sulfate (HS) in stem cell self-renewal and differentiation are poorly understood. HS is a sugar chain with linear sulfated polyanionic disaccharide repeating structures that interact with many proteins, including structural proteins in the extracellular matrix and growth factors and their receptors. Thus, unraveling the role of HS in stem cell self-renewal and differentiation could provide new insights and technical routes in clinical stem cell applications. Here, we purified rat bone marrow mesenchymal stromal cells (BMMSCs) by density gradient centrifugation, analyzed mesenchymal stromal cell surface stemness marker expression by flow cytometry, and identified the sulfotransferases responsible for sulfation ester modification of HS. An osteogenic differentiation model was established by chemical induction reagents and confirmed via alkaline phosphatase (ALP) activity detection and the expression of the osteogenic differentiation markers Runx2 and Ocn. The expression profiles of HS sulfotransferases in rat BMMSCs before and after osteogenic induction were detected by RT-PCR and Western blot. Cell spheroids were formed in both control and osteogenic culture systems when BMMSCs were grown to high confluence. We determined that this type of cell spheroid was a highly calcified nodule by histochemical staining. Among all the sulfotransferases examined, heparan sulfate 6-O-sulfotransferase 3 (HS6ST3) mRNA and protein were upregulated in these calcified cell spheroids. HS6ST3 knockdown BMMSCs were established with RNA interference, and they had significantly lower ALP activity and decreased expression of the osteogenic differentiation markers Runx2 and Ocn. These findings suggest that HS6ST3 is involved in BMMSC differentiation, and new glycotherapeutic-based technologies could be developed in the future.

Recent developments of functional scaffolds for craniomaxillofacial bone tissue engineering applications

Autogenous bone grafting remains a gold standard for the reconstruction critical-sized bone defects in the craniomaxillofacial region. Nevertheless, this graft procedure has several disadvantages such as restricted availability, donor-site morbidity, and limitations in regard to fully restoring the complicated three-dimensional structures in the craniomaxillofacial bone. The ultimate goal of craniomaxillofacial bone reconstruction is the regeneration of the physiological bone that simultaneously fulfills both morphological and functional restorations. Developments of tissue engineering in the last two decades have brought such a goal closer to reality. In bone tissue engineering, the scaffolds are fundamental, elemental and mesenchymal stem cells/osteoprogenitor cells and bioactive factors. A variety of scaffolds have been developed and used as spacemakers, biodegradable bone substitutes for transplanting to the new bone, matrices of drug delivery system, or supporting structures enhancing adhesion, proliferation, and matrix production of seeded cells according to the circumstances of the bone defects. However, scaffolds to be clinically completely satisfied have not been developed yet. Development of more functional scaffolds is required to be applied widely to cranio-maxillofacial bone defects. This paper reviews recent trends of scaffolds for crania-maxillofacial bone tissue engineering, including our studies.

Acceleration of periosteal bone formation by human basic fibroblast growth factor containing a collagen-binding domain from Clostridium histolyticum collagenase

Basic fibroblast growth factor 2 (bFGF) is a potent mitogen for mesenchymal cells, and the local application of recombinant bFGF accelerates bone union and defect repair. However, repeated dosing is required for sustained therapeutic effect as the efficacy of bFGF decreases rapidly following its diffusion from bone defect sites. Here, we attempted to develop a collagen-based bone formation system using a fusion protein (collagen binding-bFGF, CB-bFGF) consisting of bFGF and the collagen-binding domain (CBD) of Clostridium histolyticum collagenase. The addition of the CBD to bFGF did not modify its native biological activity, as shown by the capacity of the fusion protein to promote the in vitro proliferation of periosteal mesenchymal cells. The affinity of the fusion protein towards collagen and demineralized bone matrix (DBM) was also confirmed by collagen-binding assays. Moreover, in vivo periosteal bone formation assays showed that the combination of CB-bFGF with a collagen sheet induced periosteal bone formation at protein concentrations lower than those required for bFGF alone. In addition, grafts of DBM loaded with CB-bFGF accelerated new bone formation in rat femurs compared to the same concentration of bFGF administered alone. Taken together, these properties suggest that the CB-bFGF/collagen composite is a promising material for bone repair in the clinical setting.

Localized delivery of growth factors for angiogenesis and bone formation in tissue engineering

Angiogenesis is a key component of bone formation. Delivery of growth factors for both angiogenesis and osteogenesis is about to gain important potential as a future therapeutic tool. This review focuses on these growth factors that have dual functions in angiogenesis and osteogenesis, and their localized application. A major hurdle in the clinical development of growth factor therapy so far is how to assure safe and efficacious therapeutic use of such factors and avoid unwanted side effects and toxicity. It is now firmly established from the available information that the type, dose, combinations and delivery kinetics of growth factors all play a decisive role for the success of growth factor therapy. All of these parameters have to be adapted and optimized for each animal model or clinical case. In this review we discuss some important parameters associated with growth factor therapy and present an overview of selected preclinical studies, followed by a conceptual description of both established and proposed delivery strategies meeting therapeutic needs.

REPAIRING OF RABBIT SKULL DEFECT BY TGF-β1-INCORPORATED COLLAGEN SPONGES OF DIFFERENT THICKNESS

We have recently demonstrated that a collagen sponge incorporating TGF-β1 was effective in inducing bone repair at the skull defect of rabbits. In this study, the bone repairing of rabbit skulls was tried by TGF-β1-incorporated collagen sponges of different thickness to assess the influence of the size of osteoinductive materials on the bone repairing.

The collagen sponge used was prepared by foaming and freeze-drying 1 % aqueous solution of pepsin-processed porcine atelo-collagen, followed by dehydrothermal crosslinking for 6 hr in vacua. Collagen sponges with different thickness were prepared by changing the volume of collagen solution for freeze-drying and changing the number of sponges piled up. An aqueous solution of TGF-β1 or 125 I -labeled TGF-β1 was dropped onto the freeze-dried sponge to prepare collagen sponges incorporating TGF-β1 or 125 I -TGF-β1, respectively. Collagen sponges were also radioiodinated with Bolton Hunter Reagent. Following implantation of the collagen sponges incorporating 125 I -TGF-β1 and the 125 I -labeled collagen sponges into the mice subcutis, each radioactivity remaining was measured to compare the time profile of in vivo retention of TGF-β1 with that of the sponge. The TGF-β1 incorporated collagen sponges of different thickness were implanted into full-thickness defects of rabbit skulls with 6 mm in diameter. The bone repairing at the defect was evaluated in terms of histological and DEXA examinations 6 weeks later.

The remaining radioactivity of 125 I -labeled collagen sponges and 125 I -labeled TGF-β1 incorporated in collagen sponges decreased with time. The remaining periods of radioactivities of the sponges prolonged with an increase in the sponge thickness, but those of TGF-β1 were independent with the sponge thickness. The collagen sponge with 2 mm thickness was the most effective in increasing the bone mineral density at the bone defect. This finding indicated that the sponge thickness is one of the key factors contributing to successful bone repairing.

Effects of inflammation on bone: an update

PURPOSE OF REVIEW

To present an updated summary of the relationship between inflammation and localized and generalized bone loss in the rheumatic diseases.

RECENT FINDINGS

In addition to the well established role of inflammatory cytokines in promoting enhanced osteoclast function and bone loss, recent work has discovered the cytokine milieu may also inhibit osteoblast function and bone repair. The WNT and bone morphogenetic protein pathways provide molecular links between inflammation and altered bone homeostasis in chronic inflammatory states. These pathways and others have been the targets of emerging therapies for the management of inflammatory bone loss.

SUMMARY

Inflammation and bone loss are linked through a number of molecular pathways. Both of these processes need to be addressed when designing an effective treatment strategy for the rheumatic diseases.

Clinical significance of interleukin (IL)-6 in cancer metastasis to bone: potential of anti-IL-6 therapies

Metastatic events to the bone occur frequently in numerous cancer types such as breast, prostate, lung, and renal carcinomas, melanoma, neuroblastoma, and multiple myeloma. Accumulating evidence suggests that the inflammatory cytokine interleukin (IL)-6 is frequently upregulated and is implicated in the ability of cancer cells to metastasize to bone. IL-6 is able to activate various cell signaling cascades that include the STAT (signal transducer and activator of transcription) pathway, the PI3K (phosphatidylinositol-3 kinase) pathway, and the MAPK (mitogen-activated protein kinase) pathway. Activation of these pathways may explain the ability of IL-6 to mediate various aspects of normal and pathogenic bone remodeling, inflammation, cell survival, proliferation, and pro-tumorigenic effects. This review article will discuss the role of IL-6: 1) in bone metabolism, 2) in cancer metastasis to bone, 3) in cancer prognosis, and 4) as potential therapies for metastatic bone cancer.

A local application of recombinant human fibroblast growth factor 2 for tibial shaft fractures: A randomized, placebo-controlled trial

Fibroblast growth factor 2 (FGF-2) is a potent mitogen for mesenchymal cells, and a local application of recombinant human FGF-2 (rhFGF-2) in a gelatin hydrogel has been reported to accelerate bone union in our animal studies and preparatory dose-escalation trial on patients with surgical osteotomy. We have performed a randomized, double-blind, placebo-controlled trial in which patients with fresh tibial shaft fractures of transverse or short oblique type were randomly assigned to three groups receiving a single injection of the gelatin hydrogel containing either placebo or 0.8 mg (low-dosage group) or 2.4 mg (high-dosage group) of rhFGF-2 into the fracture gap at the end of an intramedullary nailing surgery. Of 194 consecutive patients over 2 years, 85 met the eligibility criteria, and 70 (24 in the placebo group and 23 each in low- and high-dosage groups) completed the 24-week study. The cumulative percentages of patients with radiographic bone union were higher in the rhFGF-2-treated groups (p = .031 and .009 in low- and high-dosage group, respectively) compared with the placebo group, although there was no significant difference between low- and high-dosage groups (p = .776). At 24 weeks, 4, 1, and 0 patients in the placebo, low-dosage, and high-dosage groups, respectively, continued to show delayed union. No patient underwent a secondary intervention, and the time to full weight bearing without pain was not significantly different among the three groups (p = .567). There also was no significant difference in the profiles of adverse events among the groups. In conclusion, a local application of the rhFGF-2 hydrogel accelerated healing of tibial shaft fractures with a safety profile.

Leukocyte common antigen-related (LAR) tyrosine phosphatase positively regulates osteoblast differentiation by modulating extracellular signal-regulated kinase (ERK) activation

Protein tyrosine phosphatases (PTPs) are pivotal regulators of key cellular functions, including cell growth, differentiation, and adhesion. Previously, we reported that leukocyte common antigen-related (LAR) tyrosine phosphatase promotes osteoblast differentiation in MC3T3-E1 preosteoblast cells. In the present study, the mechanism of the regulatory action of LAR on osteoblast differentiation was investigated. The mineralization of extracellular matrix and calcium accumulation in MC3T3-E1 cells were markedly enhanced by LAR overexpression, and these effects were further increased by treatment with a MEK inhibitor. In addition, LAR overexpression dramatically reduced extracellular signal-regulated kinase (Erk) activation during osteoblast differentiation. In contrast, a marginal effect of the inactive LAR mutant on Erk activation was detected. Expression of osteoblast-related genes such as ALP, BSP, DLX5, OCN, and RUNX2, was increased by LAR overexpression during osteoblast differentiation. On the basis of these results, we propose that LAR functions as a positive regulator of osteoblast differentiation by modulating ERK activation. Therefore, LAR phosphatase could be used as a novel regulatory target protein in many bone-associated diseases, including osteoporosis.

Pulsed ultrasounds accelerate healing of rib fractures in an experimental animal model: an effective new thoracic therapy?

OBJECTIVES

Rib fractures are a frequent traumatic injury associated with a relatively high morbidity. Currently, the treatment of rib fractures is symptomatic. Since it has been reported that pulsed ultrasounds accelerates repair of limb fractures, we hypothesized that the application of pulsed ultrasounds will modify the course of healing in an animal model of rib fracture.

METHODS

We studied 136 male Sprague-Dawley rats. Animals were randomly assigned to different groups of doses (none, 50, 100, and 250 mW/cm(2) of intensity for 3 minutes per day) and durations (2, 10, 20, and 28 days) of treatment with pulsed ultrasounds. In every subgroup, we analyzed radiologic and histologic changes in the bone callus. In addition, we examined changes in gene expression of relevant genes involved in wound repair in both control and treated animals.

RESULTS

Histologic and radiologic consolidation was significantly increased by pulsed ultrasound treatment when applied for more than 10 days. The application of 50 mW/cm(2) was the most effective dose. Only the 100 and 250 mW/cm(2) doses were able to significantly increase messenger RNA expression of insulin-like growth factor 1, suppressor of cytokine signaling-2 and -3, and vascular endothelial growth factor and decrease monocyte chemoattractant protein-1 and collagen type II-alpha 1.

CONCLUSIONS

Our findings indicate that pulsed ultrasound accelerates the consolidation of rib fractures. This study is the first to show that pulsed ultrasound promotes the healing of rib fractures. From a translational point of view, this easy, cheap technique could serve as an effective new therapeutic modality in patients with rib fractures.

Bone tissue engineering: a review in bone biomimetics and drug delivery strategies

Critical-sized defects in bone, whether induced by primary tumor resection, trauma, or selective surgery have in many cases presented insurmountable challenges to the current gold standard treatment for bone repair. The primary purpose of a tissue-engineered scaffold is to use engineering principles to incite and promote the natural healing process of bone which does not occur in critical-sized defects. A synthetic bone scaffold must be biocompatible, biodegradable to allow native tissue integration, and mimic the multidimensional hierarchical structure of native bone. In addition to being physically and chemically biomimetic, an ideal scaffold is capable of eluting bioactive molecules (e.g., BMPs, TGF-betas, etc., to accelerate extracellular matrix production and tissue integration) or drugs (e.g., antibiotics, cisplatin, etc., to prevent undesired biological response such as sepsis or cancer recurrence) in a temporally and spatially controlled manner. Various biomaterials including ceramics, metals, polymers, and composites have been investigated for their potential as bone scaffold materials. However, due to their tunable physiochemical properties, biocompatibility, and controllable biodegradability, polymers have emerged as the principal material in bone tissue engineering. This article briefly reviews the physiological and anatomical characteristics of native bone, describes key technologies in mimicking the physical and chemical environment of bone using synthetic materials, and provides an overview of local drug delivery as it pertains to bone tissue engineering is included.

Ectopic osteogenesis of mouse bone marrow stromal cells transfected with BMP 2/VEGF(165) genes in vivo

OBJECTIVE

To evaluate the osteogenic efficacy of mouse bone marrow stromal cells (mBMSC) transfected with bone morphogenetic protein 2 (BMP2) and vascular endothelial growth factor 165 (VEGF(165)) genes.

METHODS

pIRES-BMP2-VEGF(165) plasmid DNA was introduced into the mBMSC using a liposome-mediated method. The expression of BMP2 and VEGF(165) genes was assessed by reverse transcription-polymerase chain reaction (RT-PCR) and immunohistochemical analysis. Transfected cells were injected into the thigh muscle pouches of four nude mice. The osteoinductivity activity of the transfected cells was evaluated by radiographic and histological analysis at 4 weeks after injection.

RESULTS

The mRNA and proteins of both BMP2 and VEGF(165) were successfully expressed in mBMSC as confirmed by RT-PCR and immunohistochemical analysis. Ectopically formed bone tissue was clearly observed at 4 weeks after cell injection in the thigh muscle pouches of the nude mice.

CONCLUSION

mBMSC transfected with BMP2 and VEGF(165) genes can induce ectopic osteogenesis.

Effect of platelet-rich plasma and fibrin glue on healing of critical-size calvarial bone defects

Despite the insufficient number of experimental studies, platelet-rich plasma (PRP) including high amounts of growth factors is introduced to clinical use rapidly. The aim of this study was to compare the effects of PRP and platelet-poor plasma (PPP) on healing of critical-size bone defects.Bilateral full-thickness, critical-size bone defects were created in the parietal bones of 32 rabbits, which had been studied in 4 groups. Saline, thrombin solution, PPP, and PRP were applied to the created defects before closure. Radiologic defect area measurement results at 0, 4, and 16 weeks were compared between the groups. In addition, densities of the newly formed bones at 16th week were studied. Histologic parameters (primary and secondary bone trabecula, neovascularization, and bone marrow and connective tissue formation) were compared between 4- and 16-week groups.More rapid decrease in defect size was observed in groups 3 and 4 than in groups 1 and 2, both in the 4th and 16th weeks. Newly formed bone densities were also found to be higher in these 2 groups. New bone formation was detected to be more rapid considering histologic parameters, in groups 3 and 4 at 4th and 16th weeks.Study demonstrates that PRP and PPP might have favorable effects on bone healing. Although we cannot reveal any statistical difference between these 2 substances considering osteoinductive potential, PRP group has demonstrated superior results compared with fibrin glue group. Higher platelet concentrations may expose beneficial effects of PRP.

Polyethylenimine-coated albumin nanoparticles for BMP-2 delivery

Nanoparticle (NP)-based delivery has gained importance for improving the potency of therapeutic agents. The bovine serum albumin (BSA) NPs, obtained by a coacervation process, was modified by electrostatic adsorption of cationic polyethylenimine (PEI) to NP surfaces for delivery of bone-inducing growth factor, bone morphogenetic protein-2 (BMP-2). Different concentrations of PEI were utilized for coating BSA NPs to stabilize the colloidal system and to control the release of BMP-2. The NPs were characterized by size and zeta potential measurements, as well as by Scanning Electron Microscopy and Atomic Force Microscopy. The encapsulation efficiency was typically >90% in all NP preparations. In vitro release kinetics showed that the PEI concentration used for coating the NPs efficiently controlled the release of BMP-2, demonstrating a gradual slowing, sustained release pattern during a 10-day study period. The bioactivity of the encapsulated BMP-2 and the toxicity of the NPs were examined by the alkaline phosphatase (ALP) induction assay and the MTT assay, respectively, using C2C12 cells. The results indicated that PEI was the primary determinant of NP toxicities, and BSA NPs coated with 0.1 mg/mL PEI demonstrated tolerable toxicity, retained the bioactivity of BMP-2, and efficiently slowed the release rate of BMP-2. We conclude that BMP-2 encapsulated in BSA NPs might be an efficient way to deliver the protein for in vivo bone induction.