Engineering cell adhesive surfaces that direct integrin alpha5beta1 binding using a recombinant fragment of fibronectin

Development of advanced cardiac progenitor cell culture system through fibronectin and vitronectin derived peptide coated plate

Cardiovascular disease remains a global health concern. Stem cell therapy utilizing human cardiac progenitor cells (hCPCs) shows promise in treating cardiac vascular disease. However, limited availability and senescence of hCPCs hinder their widespread use. To address these challenges, researchers are exploring innovative approaches. In this study, a bioengineered cell culture plate was developed to mimic the natural cardiac tissue microenvironment. It was coated with a combination of extracellular matrix (ECM) peptide motifs and mussel adhesive protein (MAP). The selected ECM peptide motifs, derived from fibronectin and vitronectin, play crucial roles in hCPCs. Results revealed that the Fibro-P and Vitro-P coated plates significantly improved hCPC adhesion, proliferation, migration, and differentiation compared to uncoated plates. Additionally, long-term culture on the coated plates delayed cellular senescence and maintained hCPC stemness. These enhancements were attributed to the activation of integrin downstream signaling pathways. The findings suggest that the engineered ECM peptide motif-MAP-coated plates hold potential for enhancing the therapeutic efficacy of stem cell-based therapies in cardiac tissue engineering and regenerative medicine.

Integrin mechanosensing relies on a pivot-clip mechanism to reinforce cell adhesion

Cells intricately sense mechanical forces from their surroundings, driving biophysical and biochemical activities. This mechanosensing phenomenon occurs at the cell-matrix interface, where mechanical forces resulting from cellular motion, such as migration or matrix stretching, are exchanged through surface receptors, primarily integrins, and their corresponding matrix ligands. A pivotal player in this interaction is the α5β1 integrin and fibronectin (FN) bond, known for its role in establishing cell adhesion sites for migration. However, upregulation of the α5β1-FN bond is associated with uncontrolled cell metastasis. This bond operates through catch bond dynamics, wherein the bond lifetime paradoxically increases with greater force. The mechanism sustaining the characteristic catch bond dynamics of α5β1-FN remains unclear. Leveraging molecular dynamics simulations, our approach unveils a pivot-clip mechanism. Two key binding sites on FN, namely the synergy site and the RGD (Arg-Gly-Asp) motif, act as active points for structural changes in α5β1 integrin. Conformational adaptations at these sites are induced by a series of hydrogen bond formations and breaks at the synergy site. We disrupt these adaptations through a double mutation on FN, known to reduce cell adhesion. A whole-cell finite-element model is employed to elucidate how the synergy site may promote dynamic α5β1-FN binding, resisting cell contraction. In summary, our study integrates molecular- and cellular-level modeling to propose that FN's synergy site reinforces cell adhesion through enhanced binding dynamics and a mechanosensitive pivot-clip mechanism. This work sheds light on the interplay between mechanical forces and cell-matrix interactions, contributing to our understanding of cellular behaviors in physiological and pathological contexts.

Enhanced Osteogenesis in 2D and 3D Culture Systems Using RGD Peptide and α-TCP Phase Transition within Alginate-Based Hydrogel

Cell-laden hydrogels have been extensively investigated in various tissue engineering fields by their potential capacity to deposit numerous types of cells in a specific area. They are largely used in soft-tissue engineering applications because of their low mechanical strength. In addition, sodium alginate is well-known for its encapsulation, loading capacity and for being easily controllable; however, it lacks cell-binding ligands and hence the ability to adhere cells. In this study, it is aimed to enhance osteogenesis in cells encapsulated in alginate and improve its mechanical properties by introducing a synthetic peptide and calcium phosphate phase transition. To increase cell-hydrogel interactions and increasing cell viability, an RGD peptide is added to a photocrosslinkable methacrylate-modified alginate, and alpha-tricalcium phosphate (α-TCP) is added to the hydrogel to increase its mechanical strength via phase transition. Cell proliferation, growth, and differentiation are assessed in both 2D and 3D cell cultures. The addition of α-TCP significantly improved the mechanical properties of the hydrogel. Moreover, the RGD peptide and α-TCP showed a synergistic effect with significantly improved cell adhesion and osteogenesis in both 2D and 3D cell cultures. Therefore, the functional hydrogel developed in this study can potentially be used for bone tissue regeneration.

Transcriptome analysis of long non-coding RNA associated with embryonic muscle development in chickens

1. Skeletal muscle is an important component of chicken carcass. In chickens, the number of muscle fibres is fixed during the embryonic period, and muscle development during the embryonic period determines the muscle development potential after hatching.2. Beijing-You (BY) and Cornish (CN) chickens show completely different growth rates and body types, and two breeds were used in this study to explore the role of lncRNAs in muscle development during different chicken embryonic periods. A systematic analysis of lncRNAs and mRNAs were conducted in the pectoral muscle tissues of BY and CN chickens at embryonic days 11 (ED11), 13 (ED13), 15 (ED15), 17 (ED17), and 1-day-old (D1) using RNA-seq. A total of 4,104 differentially expressed transcripts (DETs) were identified among the five stages, including 2,359 lncRNAs and 1,745 mRNAs.3. The number of DETs between the two breeds at ED17 (1,658 lncRNAs and 1,016 mRNAs) was much higher than the total number of DET at all the other stages (692 lncRNAs and 729 mRNAs), indicating that the two breeds show the largest difference in gene regulation at ED17.4. Correlation analysis was performed for all differentially expressed lncRNAs and mRNAs during the five periods. Forty-three, cis interaction pairs of lncRNA-mRNA related to chicken muscle development were predicted. The expression of four pairs was verified, and the results showed MSTRG.12395.2-FGFBP2 and MSTRG.18590.6-FMOD were significantly up-regulated in CN at ED11 compared to BY and might be important candidate genes for embryonic muscle development.

Into the Tissues: Extracellular Matrix and Its Artificial Substitutes: Cell Signalling Mechanisms

The existence of orderly structures, such as tissues and organs is made possible by cell adhesion, i.e., the process by which cells attach to neighbouring cells and a supporting substance in the form of the extracellular matrix. The extracellular matrix is a three-dimensional structure composed of collagens, elastin, and various proteoglycans and glycoproteins. It is a storehouse for multiple signalling factors. Cells are informed of their correct connection to the matrix via receptors. Tissue disruption often prevents the natural reconstitution of the matrix. The use of appropriate implants is then required. This review is a compilation of crucial information on the structural and functional features of the extracellular matrix and the complex mechanisms of cell-cell connectivity. The possibilities of regenerating damaged tissues using an artificial matrix substitute are described, detailing the host response to the implant. An important issue is the surface properties of such an implant and the possibilities of their modification.

Improved cell adhesion to activated vapor silanization-biofunctionalized Ti-6Al-4V surfaces with ECM-derived oligopeptides

Titanium implants are widely used in traumatology and various orthopedic fields. Titanium and other metallic-based implants have limited structural and functional integration into the body, which translates into progressive prosthesis instability and the need for new surgical interventions that have enormous social and economic impacts. To enhance the biocompatibility of titanium implants, numerous biofunctionalization strategies have been developed. However, the problem persists, as more than 70% of implant failures are due to aseptic loosening. In this study we addressed the problem of improving the physiological engraftability and acceptability of titanium-based implants by applying a robust and versatile functionalization method based on the covalent immobilization of extracellular matrix (ECM)-derived oligopeptides on Ti-6Al-4V surfaces treated by activated vapor silanization (AVS). The feasibility of this technique was evaluated with two oligopeptides of different structures and compositions. These oligopeptides were immobilized on Ti-6Al-4V substrates by a combination of AVS and N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride/N-hydroxysuccinimide (EDC/NHS) crosslinking chemistry. The immobilization was shown to be stable and resistant to chemical denaturing upon sodium dodecyl sulfate treatment. On Ti-6Al-4V surfaces both peptides increased the attachment, spreading, rearrangement and directional growth of mesenchymal stem and progenitor cells (MSC) with chondro- and osteo-regenerative capacities. We also found that this biofunctionalization method (AVS-EDC/NHS) increased the attachment capacity of an immortalized cell line of neural origin with poor adhesive properties, highlighting the versatility and robustness of this method in terms of potential oligopeptides that may be used, and cell lineages whose anchorage to the biomaterial may be enhanced. Collectively, this novel functionalization strategy can accelerate the development of advanced peptide-functionalized metallic surfaces, which, in combination with host or exogenously implanted stem cells, have the potential to positively affect the osteoregenerative and osteointegrative abilities of metallic-based prostheses.

3D-Printed Porous Tantalum Coated with Antitubercular Drugs Achieving Antibacterial Properties and Good Biocompatibility

Treatment of bone and joint tuberculosis remains a challenge. The development of tissue-engineered drug-loaded biomaterials has increased the therapeutic options. However, for the treatment of osteoarticular tuberculosis with severe local infection risks and high weight-bearing requirements, it is still necessary to design materials consistent with bone biomechanics, cytocompatibility, and osteogenesis and to provide more effective antimicrobial functions. The antitubercular drugs isoniazid and rifampicin are loaded with gellan gum, and a 3D-printed porous tantalum surface is treated with polydopamine to increase adhesion. The osteogenic induction and differentiation are tested using alkaline phosphatase, alizarin red staining, sirius red staining, and polymerase chain reaction testing. Bone regeneration in vivo is measured by X-ray, micro-computerized tomography, hard tissue sections, and fluorescence staining. The drug is released slowly in vitro and in vivo, increasing the duration of antibacterial action. The composite bio-scaffolds inhibit Staphylococcus aureus growth, have good biocompatibility, and does not inhibit the induction of osteogenic differentiation of rat bone marrow mesenchymal stem cells. The composite bio-scaffold can simultaneously achieve localized long-term controlled drug release and bone regeneration and is a promising route for bone and joint tuberculosis treatment.

The optimization of pepsin processing time to balance the mechanical and biological properties of xenogeneic bone

Xenogeneic bone showed great prospects to treat large bone defects due to its bionic composition and structure, but the immunogenicity limited its wide applications. Previously, we developed a pepsin treating method to eliminate the immunogenicity of xenogeneic bone. In this study, we further investigated the effect of pepsin processing time on the biological and mechanical properties. The results indicated that increased pepsin treating time impaired the mechanical properties of xenogeneic bone. And MC3T3-E1 cells showed enhanced adhesion ability, as well as increased production of alkaline phosphatase and calcium nodulus production on the xenogeneic bone processed by pepsin for 24 hr (P24), as compared with xenogeneic bone processed by pepsin for 30 hr (P30) and 36 hr (P36). In addition, we found no significant inflammatory responses after implanting different xenogeneic bone into the intermuscular site of rats. These results suggested that xenogeneic bone processed by pepsin for 24 hr may be a preferable choice when using the xenogeneic bone as biomaterials for further researches.

Engineering of Bio-Adhesive Ligand Containing Recombinant RGD and PHSRN Fibronectin Cell-Binding Domains in Fusion with a Colored Multi Affinity Tag: Simple Approach for Fragment Study from Expression to Adsorption

Engineering of biomimetic motives have emerged as promising approaches to improving cells’ binding properties of biomaterials for tissue engineering and regenerative medicine. In this study, a bio-adhesive ligand including cell-binding domains of human fibronectin (FN) was engineered using recombinant protein technology, a major extracellular matrix (ECM) protein that interacts with a variety of integrins cell-surface’s receptors and other ECM proteins through specific binding domains. 9th and 10th fibronectin type III repeat containing Arginine-Glycine-Aspartic acid (RGD) and Pro-His-Ser-Arg-Asn (PHSRN) synergic site (FNIII9-10) were expressed in fusion with a Colored Multi Affinity Tag (CMAT) to develop a simplified production and characterization process. A recombinant fragment was produced in the bacterial system using E. coli with high yield purified protein by double affinity chromatography. Bio-adhesive surfaces were developed by passive coating of produced fragment onto non adhesive surfaces model. The recombinant fusion protein (CMAT-FNIII9/10) demonstrated an accurate monitoring capability during expression purification and adsorption assay. Finally, biological activity of recombinant FNIII9/10 was validated by cellular adhesion assay. Binding to α5β1 integrins were successfully validated using a produced fragment as a ligand. These results are robust supports to the rational development of bioactivation strategies for biomedical and biotechnological applications.

The increased oxygen content in tantalum leads to decreased bioactivity and osteogenic ability of tantalum implants

Tantalum (Ta) implants fabricated by current processing techniques inevitably contain more or less oxygen impurities due to the extremely high melting point and high affinity of oxygen for Ta. Therefore, in this study we investigated whether oxygen impurities cause any effects on the bioactivity of Ta. EDS analysis demonstrated the surface oxygen content difference among different fabricated Ta samples, and the surface water contact angle (WCA) of Ta with high oxygen content (HO-Ta) was significantly higher than that of Ta with medium (MO-Ta) and low (LO-Ta) oxygen content. The in vitro cellular experiments showed that MC3T3-E1 cells on Ta with lower oxygen content exhibited better adhesion, growth, morphological development and in vitro osteogenic ability. Similarly, the in vivo animal experiments indicated the better bone regeneration and ingrowth performances of Ta with lower oxygen content. In addition, the highest ROS production was detected in the HO-Ta group, while the lowest in the LO-Ta group. This study suggests that the oxygen content within Ta, which occurs unavoidably due to technical limitations, negatively affects the bioactivity of Ta in a dose-dependent manner, indicating the need to develop techniques to produce orthopedic all-Ta implants.

The Body's Cellular and Molecular Response to Protein-Coated Medical Device Implants: A Review Focused on Fibronectin and BMP Proteins

Recent years have seen a marked rise in implantation into the body of a great variety of devices: hip, knee, and shoulder replacements, pacemakers, meshes, glucose sensors, and many others. Cochlear and retinal implants are being developed to restore hearing and sight. After surgery to implant a device, adjacent cells interact with the implant and release molecular signals that result in attraction, infiltration of the tissue, and attachment to the implant of various cell types including monocytes, macrophages, and platelets. These cells release additional signaling molecules (chemokines and cytokines) that recruit tissue repair cells to the device site. Some implants fail and require additional revision surgery that is traumatic for the patient and expensive for the payer. This review examines the literature for evidence to support the possibility that fibronectins and BMPs could be coated on the implants as part of the manufacturing process so that the proteins could be released into the tissue surrounding the implant and improve the rate of successful implantation.

Designing stem cell niches for differentiation and self-renewal

Mesenchymal stem cells, characterized by their ability to differentiate into skeletal tissues and self-renew, hold great promise for both regenerative medicine and novel therapeutic discovery. However, their regenerative capacity is retained only when in contact with their specialized microenvironment, termed the stem cell niche Niches provide structural and functional cues that are both biochemical and biophysical, stem cells integrate this complex array of signals with intrinsic regulatory networks to meet physiological demands. Although, some of these regulatory mechanisms remain poorly understood or difficult to harness with traditional culture systems. Biomaterial strategies are being developed that aim to recapitulate stem cell niches, by engineering microenvironments with physiological-like niche properties that aim to elucidate stem cell-regulatory mechanisms, and to harness their regenerative capacity in vitro In the future, engineered niches will prove important tools for both regenerative medicine and therapeutic discoveries.

Modeling integrin and plasma-polymerized pyrrole interactions: chemical diversity relevance for cell regeneration

Protein-engineered biomaterials represent a powerful approach to increase biofunctional activity like tissue repair and celular proliferation. Among these materials, integrins and the development of their specific interactions with plasma-polymerized pyrrole (PPPy) are promising biomaterial for tissue regeneration. In this paper, we studied the molecular recognition in the active site of three integrins (α5β1, αvβ3 and αIIbβ3) with PPPy using the structure proposed by Kumar et al. PPPy molecule has three sites to incorporate different species, we worked mainly with the functional groups, –NH₂ and –OH groups according to our IR spectroscopic results. We carried out docking studies to find the better conformational couplings and to determine electrostatic (ΔG_elec) and non-electrostatic (ΔG_non-elec) contributions to the binding free energy (ΔG_b) of these complexes we used Adaptive Poisson-Bolztmann program (APBS). Our results indicated that when incorporating -1H-azirine, -NH₂ or –OH group in PPPy structure, interactions with integrins were favorable, as indicated by correspondent ΔG_b values. These interactions were mainly triggered by Coulomb interactions, an important term in the electrostatic component. Furthermore, our studies suggest that some residues of integrins α5β1, αvβ3 and αIIbβ3 like aspartates are important for the binding to PPPy structures. Detailed interactions between integrin α5β1 and PPPy structures were revealed by molecular dynamics simulations. We used this particular integrin structure because of its favorable ΔG_b as well as its major cellular receptor for the extracellular matrix protein fibronectin. Clustering analysis allowed us to carry out focused docking studies and to determine the time evolution of the ΔG_b values. By incorporating -NH₂ into PPPy structure, ΔG_b values were very favorable during the course of the dynamics simulations by the establishment of hydrogen bonds with Asn224 and/orAsp227 residues, which are part of the integrin α5β1 pocket. However, for the integrin α5β1-PPPy-1H-azirine complex and the rest of the functional groups, the ΔG_b values were less favorable, although PPPy was found at a distance of less than 5 Å from the active site residues. This work is complementary to the previous studies made employing PPPy nanoparticles for a variety of tissue engineering applications, and were done to enlighten the role played by the amino group of the PPPy in its integrin recognition process.

Biomaterials and Gene Manipulation in Stem Cell-Based Therapies for Spinal Cord Injury

Spinal cord injury (SCI), a prominent health issue, represents a substantial portion of the global health care burden. Stem cell-based therapies provide novel solutions for SCI treatment, yet obstacles remain in the form of low survival rate, uncontrolled differentiation, and functional recovery. The application of engineered biomaterials in stem cell therapy provides a physicochemical microenvironment that mimics the stem cell niche, facilitating self-renewal, stem cell differentiation, and tissue reorganization. Nonetheless, external microenvironment support is inadequate, and some obstacles persist, for example, limited sources, gradual aging, and immunogenicity of stem cells. Targeted stem cell gene manipulation could eliminate many of these drawbacks, allowing safer, more effective use under regulation of intrinsic mechanisms. Additionally, through genetic labeling of stem cells, their role in tissue engineering may be elucidated. Therefore, combining stem cell therapy, materials science, and genetic modification technologies may shed light on SCI treatment. Herein, recent advances and advantages of biomaterials and gene manipulation, especially with respect to stem cell-based therapies, are highlighted, and their joint performance in SCI is evaluated. Current technological limitations and perspectives on future directions are then discussed. Although this combination is still in the early stages of development, it is highly likely to substantially contribute to stem cell-based therapies in the foreseeable future.

Priming integrin α5 promotes human dental pulp stem cells odontogenic differentiation due to extracellular matrix deposition and amplified extracellular matrix-receptor activity

Our previous study showed that knocking down integrin α5 (ITGA5) expression by using a lentiviral vector in human dental pulp stem cells (DPSCs) led to weakening proliferation and migration capacity while enhanced odontogenic differentiation. To seek for possible clinical application, we investigated the effect of the ITGA5 priming synthetic cyclic peptide (SCP; GA-CRRETAWAC-GA) on proliferation, migration, and the odontogenic differentiation of DPSCs. Remarkably, the involved mechanism was explored by isobaric tag for relative and absolute quantitation proteomic technique, and the in vivo effect of ITGA5 was investigated by nude mice subcutaneous transplantation of cell and hydroxyapatite/β-tricalcium phosphate complex. Results showed that SCP weakened the proliferation and migration capacity while enhanced odontogenic differentiation of DPSCs as lentivirus. The phosphorylation of FAK, PI3K/AKT, and MEK1/2/ERK1/2, along with IGF2/IGFBP2 and Wnt/β-catenin signaling pathway play an important role in this process. Proteomic Gene Ontology and Kyoto Encyclopedia of Genes and Genomes enrichment analysis revealed the key role of extracellular matrix (ECM) and ECM-receptor activity pathway were involved. ECM constituents, secreted protein acidic and cysteine-rich (SPARC), lumican, vitronectin, prolargin, decorin, collagen type VI α1 chain (COL6A1), COL6A2, COL14A1, and COL5A1 were upregulated in the ITGA5-silenced group. Inhibited expression of ITGA5 in DPSCs increased osteoid tissue formation and stronger related genes expression in vivo. In conclusion, the ITGA5 priming peptide could promote DPSCs odontogenic differentiation as lentivirus. Proteomics and bioinformatic analysis revealed that this may be due to the deposition of ECM and amplified ECM-receptor activity, which could fuel the application process of utilizing priming ITGA5 on dental clinical practice.

Integrin Clustering Matters: A Review of Biomaterials Functionalized with Multivalent Integrin-Binding Ligands to Improve Cell Adhesion, Migration, Differentiation, Angiogenesis, and Biomedical Device Integration

Material systems that exhibit tailored interactions with cells are a cornerstone of biomaterial and tissue engineering technologies. One method of achieving these tailored interactions is to biofunctionalize materials with peptide ligands that bind integrin receptors present on the cell surface. However, cell biology research has illustrated that both integrin binding and integrin clustering are required to achieve a full adhesion response. This biophysical knowledge has motivated researchers to develop material systems biofunctionalized with nanoscale clusters of ligands that promote both integrin occupancy and clustering of the receptors. These materials have improved a wide variety of biological interactions in vitro including cell adhesion, proliferation, migration speed, gene expression, and stem cell differentiation; and improved in vivo outcomes including increased angiogenesis, tissue healing, and biomedical device integration. This review first introduces the techniques that enable the fabrication of these nanopatterned materials, describes the improved biological effects that have been achieved, and lastly discusses the current limitations of the technology and where future advances may occur. Although this technology is still in its nascency, it will undoubtedly play an important role in the future development of biomaterials and tissue engineering scaffolds for both in vitro and in vivo applications.

Recombinant fibronectin fragment III8-10/polylactic acid hybrid nanofibers enhance the bioactivity of titanium surface

AIM

To develop a nanofiber (NF)-based biomimetic coating on titanium (Ti) that mimics the complex spatiotemporal organization of the extracellular matrix (ECM).

MATERIALS & METHODS

Recombinant cell attachment site (CAS) of fibronectin type III8-10 domain was co-electrospun with polylactic acid (PLA) and covalently bound on polished Ti discs. Osteoblast-like SaOS-2 cells were used to evaluate their complex bioactivity.

RESULTS

A significant increase of cell spreading was found on CAS/PLA hybrid NFs, followed by control pure PLA NFs and bare Ti discs. Cell proliferation showed similar trend being about twice higher on CAS/PLA NFs. The significantly increased ALP activity at day 21 indicated an enhanced differentiation of SaOS-2 cells.

CONCLUSION

Coating of Ti implants with hybrid CAS/PLA NFs may improve significantly their osseointegration potential.

Advances in Protein-Based Materials: From Origin to Novel Biomaterials

Biomaterials play a very important role in biomedicine and tissue engineering where they directly affect the cellular activities and their microenvironment . Myriad of techniques have been employed to fabricate a vast number natural, artificial and recombinant polymer s in order to harness these biomaterials in tissue regene ration , drug delivery and various other applications. Despite of tremendous efforts made in this field during last few decades, advanced and new generation biomaterials are still lacking. Protein based biomaterials have emerged as an attractive alternatives due to their intrinsic properties like cell to cell interaction , structural support and cellular communications. Several protein based biomaterials like, collagen , keratin , elastin , silk protein and more recently recombinant protein s are being utilized in a number of biomedical and biotechnological processes. These protein-based biomaterials have enormous capabilities, which can completely revolutionize the biomaterial world. In this review, we address an up-to date review on the novel, protein-based biomaterials used for biomedical field including tissue engineering, medical science, regenerative medicine as well as drug delivery. Further, we have also emphasized the novel fabrication techniques associated with protein-based materials and implication of these biomaterials in the domain of biomedical engineering .

* Engineering Membranes for Bone Regeneration

This review is focused on the use of membranes for the specific application of bone regeneration. The first section focuses on the relevance of membranes in this context and what are the specifications that they should possess to improve the regeneration of bone. Afterward, several techniques to engineer bone membranes by using "bulk"-like methods are discussed, where different parameters to induce bone formation are disclosed in a way to have desirable structural and functional properties. Subsequently, the production of nanostructured membranes using a bottom-up approach is discussed by highlighting the main advances in the field of bone regeneration. Primordial importance is given to the promotion of osteoconductive and osteoinductive capability during the membrane design. Whenever possible, the films prepared using different techniques are compared in terms of handability, bone guiding ability, osteoinductivity, adequate mechanical properties, or biodegradability. A last chapter contemplates membranes only composed by cells, disclosing their potential to regenerate bone.

Fibronectin promotes directional persistence in fibroblast migration through interactions with both its cell-binding and heparin-binding domains

The precise mechanisms through which insoluble, cell-adhesive ligands induce and regulate directional cell migration remain obscure. We recently demonstrated that elevated surface density of physically adsorbed plasma fibronectin (FN) promotes high directional persistence in fibroblast migration. While cell-FN association through integrins α₅β₁ and α_vβ₃ was necessary, substrates that selectively engaged these integrins did not support the phenotype. We here show that high directional persistence necessitates a combination of the cell-binding and C-terminal heparin-binding domains of FN, but does not require the engagement of syndecan-4 or integrin α₄β₁. FN treatment with various fixation agents indicated that associated changes in fibroblast motility were due to biochemical changes, rather than alterations in its physical state. The nature of the coating determined the ability of fibroblasts to assemble endogenous or exogenous FN, while FN fibrillogenesis played a minor, but significant, role in regulating directionality. Interestingly, knockdown of cellular FN abolished cell motility altogether, demonstrating a requirement for intracellular processes in enabling fibroblast migration on FN. Lastly, kinase inhibition experiments revealed that regulation of cell speed and directional persistence are decoupled. Hence, we have identified factors that render full-length FN a promoter of directional migration and discuss the possible, relevant mechanisms.

Current approaches for modulation of the nanoscale interface in the regulation of cell behavior

Regulation of cell behavior in response to nanoscale features has been the focus of much research in recent years and the successful generation of nanoscale features capable of mimicking the natural nanoscale interface has been of great interest in the field of biomaterials research. In this review, we discuss relevant nanofabrication techniques and how they are combined with bioengineering applications to mimic the natural extracellular matrix (ECM) and create valuable nanoscale interfaces.

Novel peptides for small-caliber graft functionalization selected by a phage display of endothelial-positive/platelet-negative combined selection

A new protocol to identify peptides with EPCs high affinity and at the same time the ability to suppress the interaction with platelets was presented.

Surface modified cellulose scaffolds for tissue engineering

We report the ability of cellulose to support cells without the use of matrix ligands on the surface of the material, thus creating a two-component system for tissue engineering of cells and materials. Sheets of bacterial cellulose, grown from a culture medium containing Acetobacter organism were chemically modified with glycidyltrimethylammonium chloride or by oxidation with sodium hypochlorite in the presence of sodium bromide and 2,2,6,6-tetramethylpipiridine 1-oxyl radical to introduce a positive, or negative, charge, respectively. This modification process did not degrade the mechanical properties of the bulk material, but grafting of a positively charged moiety to the cellulose surface (cationic cellulose) increased cell attachment by 70% compared to unmodified cellulose, while negatively charged, oxidised cellulose films (anionic cellulose), showed low levels of cell attachment comparable to those seen for unmodified cellulose. Only a minimal level of cationic surface derivitisation (ca 3% degree of substitution) was required for increased cell attachment and no mediating proteins were required. Cell adhesion studies exhibited the same trends as the attachment studies, while the mean cell area and aspect ratio was highest on the cationic surfaces. Overall, we demonstrated the utility of positively charged bacterial cellulose in tissue engineering in the absence of proteins for cell attachment.

Effects of the dielectric properties of the ceramic-solvent interface on the binding of proteins to oxide ceramics: a non-local electrostatic approach

The rapid development of nanoscience and nanotechnology has raised many fundamental questions that significantly impede progress in these fields. In particular, understanding the physicochemical processes at the interface in aqueous solvents requires the development and application of efficient and accurate methods. In the present work we evaluate the electrostatic contribution to the energy of model protein-ceramic complex formation in an aqueous solvent. We apply a non-local (NL) electrostatic approach that accounts for the effects of the short-range structure of the solvent on the electrostatic interactions of the interfacial systems. In this approach the aqueous solvent is considered as a non-ionic liquid, with the rigid and strongly correlated dipoles of the water molecules. We have found that an ordered interfacial aqueous solvent layer at the protein- and ceramic-solvent interfaces reduces the charging energy of both the ceramic and the protein in the solvent, and significantly increases the electrostatic contribution to their association into a complex. This contribution in the presented NL approach was found to be significantly shifted with respect to the classical model at any dielectric constant value of the ceramics. This implies a significant increase of the adsorption energy in the protein-ceramic complex formation for any ceramic material. We show that for several biocompatible ceramics (for example HfO2, ZrO2, and Ta2O5) the above effect predicts electrostatically induced protein-ceramic complex formation. However, in the framework of the classical continuum electrostatic model (the aqueous solvent as a uniform dielectric medium with a high dielectric constant ∼80) the above ceramics cannot be considered as suitable for electrostatically induced complex formation. Our results also show that the protein-ceramic electrostatic interactions can be strong enough to compensate for the unfavorable desolvation effect in the process of protein-ceramic complex formation.

Diffusion-Induced Hydrophilic Conversion of Polydimethylsiloxane/Block-Type Phospholipid Polymer Hybrid Substrate for Temporal Cell-Adhesive Surface

In this study, diffusion-induced hydrophobic-hydrophilic conversion of the surface of the cross-linked polydimethylsiloxane (PDMS) substrate was realized by employing a simple swelling-deswelling process of PDMS substrate in a block-type polymer solution with the aim of development of a temporal cell-adhesive substrate. The ABA block-type polymer composed of poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) segment and PDMS segment with over 70% of dimethylsiloxane unit composition could be successfully incorporated in the PDMS substrate during the swelling-deswelling process to prepare the PDMS/phospholipid block copolymer hybrid substrates. During the aging process of the PDMS substrate for 4 days in aqueous medium, its surface property changed gradually from hydrophobic to hydrophilic. X-ray photoelectron spectroscopy and atomic force microscopy data provided strong evidence that the time-dependent hydrophilic conversion of the PDMS/block-type phospholipid polymer hybrid substrate was induced by the diffusion of the hydrophilic PMPC segment in the block-type polymer to be tethered on the substrate. During the hydrophilic conversion process, surface-adsorbed fibronectin was gradually desorbed from the substrate surface, and this resulted in successful detachment of two-dimensional connected cell crowds.

αvβ3- or α5β1-Integrin-Selective Peptidomimetics for Surface Coating

Engineering biomaterials with integrin-binding activity is a very powerful approach to promote cell adhesion, modulate cell behavior, and induce specific biological responses at the surface level. The aim of this Review is to illustrate the evolution of surface-coating molecules in this field: from peptides and proteins with relatively low integrin-binding activity and receptor selectivity to highly active and selective peptidomimetic ligands. In particular, we will bring into focus the difficult challenge of achieving selectivity between the two closely related integrin subtypes αvβ3 and α5β1. The functionalization of surfaces with such peptidomimetics opens the way for a new generation of highly specific cell-instructive surfaces to dissect the biological role of integrin subtypes and for application in tissue engineering and regenerative medicine.

Phenolic Acid-based Poly(anhydride-esters) as Antioxidant Biomaterials

Poly(anhydride-esters) comprised of naturally occurring, non-toxic phenolic acids, namely syringic and vanillic acid, with antioxidant properties were prepared via solution polymerization methods. Polymer and polymer precursor physiochemical properties were characterized, including polymer molecular weight and thermal properties. In vitro release studies illustrated that polymer hydrolytic degradation was influenced by relative hydrophobicity and degree of methoxy substitution of the phenolic acids. Further, the released phenolic acids were found to maintain antioxidant potency relative to free phenolic acid controls as determined by a 2,2-diphenyl-1-picrylhydrazyl assay. Polymer cytotoxicity was assessed with L929 fibroblasts in polymer-containing media; appropriate cell morphology and high fibroblast proliferation were obtained for the polymers at the lower concentrations. These polymers deliver non-cytotoxic levels of naturally occurring antioxidants, which could be efficacious in topical delivery of antioxidant therapies.

Osseoconductivity of a Specific Streptavidin-Biotin-Fibronectin Surface Coating of Biotinylated Titanium Implants - A Rabbit Animal Study

BACKGROUND

Biofunctionalized implant surfaces may accelerate bony integration and increase long-term stability.

PURPOSE

The aim of the study was to evaluate the osseous reaction toward biomimetic titanium implants surfaces coated with quasicovalent immobilized fibronectin in an in vivo animal model.

MATERIALS AND METHODS

A total of 84 implants (uncoated [control 1, n = 36], streptavidin-biotin coated [test 1, n = 24], streptavidin-biotin-fibronectin coated [test 2, n = 24]) were inserted 1 mm supracortically in the proximal tibia of 12 rabbits. The samples were examined after 3 and 6 weeks. Total bone-implant contact (tBIC; %), bone-implant contact in the cortical (cBIC; %) and in the spongious bone (sBIC; %) as well as the percentage of linear bone fill (PLF; %) were evaluated.

RESULTS

After 3 weeks, streptavidin-biotin-fibronectin implants had a significant higher sBIC (p = .043) and PLF (p = .007) compared with the uncoated samples. After 6 weeks, this difference was significant for tBIC (p = .016) and cBIC (p < .001). Additionally, uncoated screws showed a significant higher sBIC when compared with the fibronectin coating (p < .001). Streptavidin-biotin-coated implants showed less bone growth at both time points of all examined parameters when compared with their counterparts (all p < .001).

CONCLUSIONS

Quasicovalent immobilization of biotinylated fibronectin with the streptavidin-biotin-fibronectin system on smooth surface titanium shows a beneficial faster osseous healing in vivo. Besides, an antifouling effect of the streptavidin-biotin coating was proven.

Bioengineered mussel glue incorporated with a cell recognition motif as an osteostimulating bone adhesive for titanium implants

An engineered mussel glue MAP-RGD can be successfully used as a novel functional osteostimulating bone adhesive for titanium implants through improved osteoblastic cell behaviors, blood responses, and eventually enhanced bone regeneration.

Progress towards biocompatible intracortical microelectrodes for neural interfacing applications

To ensure long-term consistent neural recordings, next-generation intracortical microelectrodes are being developed with an increased emphasis on reducing the neuro-inflammatory response. The increased emphasis stems from the improved understanding of the multifaceted role that inflammation may play in disrupting both biologic and abiologic components of the overall neural interface circuit. To combat neuro-inflammation and improve recording quality, the field is actively progressing from traditional inorganic materials towards approaches that either minimizes the microelectrode footprint or that incorporate compliant materials, bioactive molecules, conducting polymers or nanomaterials. However, the immune-privileged cortical tissue introduces an added complexity compared to other biomedical applications that remains to be fully understood. This review provides a comprehensive reflection on the current understanding of the key failure modes that may impact intracortical microelectrode performance. In addition, a detailed overview of the current status of various materials-based approaches that have gained interest for neural interfacing applications is presented, and key challenges that remain to be overcome are discussed. Finally, we present our vision on the future directions of materials-based treatments to improve intracortical microelectrodes for neural interfacing.

Living biointerfaces based on non-pathogenic bacteria to direct cell differentiation

Genetically modified Lactococcus lactis, non-pathogenic bacteria expressing the FNIII_7-10 fibronectin fragment as a protein membrane have been used to create a living biointerface between synthetic materials and mammalian cells. This FNIII_7-10 fragment comprises the RGD and PHSRN sequences of fibronectin to bind α5β1 integrins and triggers signalling for cell adhesion, spreading and differentiation. We used L. lactis strain to colonize material surfaces and produce stable biofilms presenting the FNIII_7-10 fragment readily available to cells. Biofilm density is easily tunable and remains stable for several days. Murine C2C12 myoblasts seeded over mature biofilms undergo bipolar alignment and form differentiated myotubes, a process triggered by the FNIII_7-10 fragment. This biointerface based on living bacteria can be further modified to express any desired biochemical signal, establishing a new paradigm in biomaterial surface functionalisation for biomedical applications.

Switchable substrates for analyzing and engineering cellular functions

Cellular activity is highly dependent on the extracellular environment, which is composed of surrounding cells and extracellular matrices. This focus review summarizes recent advances in chemically and physically engineered switchable substrates designed to control such cellular microenvironments by application of an external stimulus. Special attention is given to their molecular design, switching strategies, and representative examples for bioanalytical and biomedical applications.

Single-cell force spectroscopy, an emerging tool to quantify cell adhesion to biomaterials

Cell adhesion receptors play a central role in sensing and integrating signals provided by the cellular environment. Thus, understanding adhesive interactions at the cell-biomaterial interface is essential to improve the design of implants that should emulate certain characteristics of the cell's natural environment. Numerous cell adhesion assays have been developed; among these, atomic force microscopy-based single-cell force spectroscopy (AFM-SCFS) provides a versatile tool to quantify cell adhesion at physiological conditions. Here we discuss how AFM-SCFS can be used to quantify the adhesion of living cells to biomaterials and give examples of using AFM-SCFS in tissue engineering and regenerative medicine. We anticipate that in the near future, AFM-SCFS will be established in the biomaterial field as an important technique to quantify cell-biomaterial interactions and thereby will contribute to the optimization of implants, scaffolds, and medical devices.

Adsorption state of fibronectin on poly(dimethylsiloxane) surfaces with varied stiffness can dominate adhesion density of fibroblasts

The state of adsorbed fibronectin and the subsequent cell adhesion behavior on polydimethylsiloxane (PDMS) substrates with varied stiffness were investigated. The bulk elastic modulus as well as the macroscale and nanoscale surface repulsion forces on PDMS substrates with five different cross-linker concentrations (2.5, 5, 10, 20 and 40wt.%) were evaluated by using tensile and compression tests as well as atomic force microscopy (AFM) indentation. The PDMS substrate with 10wt.% cross-linker showed the maximum stiffness in the bulk elastic modulus and macroscale compression test. In contrast, PDMS substrates with 2.5 and 5wt.% cross-linker concentration showed the maximum stiffness in the nanoscale compression test, which indicates that the physical properties of the nanoscale outermost surface are different from the bulk and macroscale surface properties. The fibronectin-treated PDMS substrates showed almost the same amount of fibronectin adsorption. However, the outermost surface density of fibronectin was related to the macroscale surface stiffness, and the exposure of the cell-binding motif was related to the nanoscale surface stiffness. Moreover, the different adsorption state of fibronectin was further confirmed by quartz crystal microbalance-dissipation (QCM-D) monitoring. The adhesion behavior of NIH3T3 mouse fibroblasts was in turn related to the exposure of the cell-binding motif. These results suggest that the well-known differences in cell adhesion behavior on PDMS substrates with varied stiffness are primarily induced by different responses of fibronectin to the PDMS substrates.

Engineering the regenerative microenvironment with biomaterials

Modern synthetic biomaterials are being designed to integrate bioactive ligands within hydrogel scaffolds for cells to respond and assimilate within the matrix. These advanced biomaterials are only beginning to be used to simulate the complex spatio-temporal control of the natural healing microenvironment. With increasing understanding of the role of growth factors and cytokines and their interactions with components of the extracellular matrix, novel biomaterials are being developed that more closely mimic the natural healing environments of tissues, resulting in increased efficacy in applications of tissue repair and regeneration. Herein, the important aspects of the healing microenvironment, and how these features can be incorporated within innovative hydrogel scaffolds, are presented.