Fluorescent in situ hybridization applied on samples taken with adhesive tape strips

Alterations in structural components of extracellular polymeric substance of epilithic bacteria Brevundimonas faecalis BC1 growing on monumental rock under thermal stress

In this study, a comparison of biofilm formation, extracellular polymeric substances (EPS) production, protein and polysaccharides estimation, and protein profiling through SDS-PAGE, FTIR, GC-MS, ESI-MS, SEM, and AFM analysis were done for EPS from epilithic bacteria Brevundimonas faecalis BC1 obtained from monumental rock under normal room temperature and heat stressed condition. Heat stress (60 ± 2 °C) that simulates hot monumental rock surfaces during the summer season caused  bacteria BC1 to produce more EPS (8.56 g/L), biofilm, protein and polysaccharides, extra SDS-PAGE protein bands of different molecular weight than their control counterpart. FTIR and GC-MS analysis showed extra polysaccharide formation in the EPS under heat stress and ESI-MS analysis clearly showed differences in structural components of EPS from two different sources. Consistently, SEM and AFM showed more branching structural components with dentate spikes in the EPS obtained from a heat-stressed source than from its counterpart, suggesting their protective role toward heat stress and adhesive potential for biofilm.

Biomineral deposits and coatings on stone monuments as biodeterioration fingerprints

Biominerals deposition processes, also called biomineralisation, are intimately related to biodeterioration on stone surfaces. They include complex processes not always completely well understood. The study of biominerals implies the identification of organisms, their molecular mechanisms, and organism/rock/atmosphere interactions. Sampling restrictions of monument stones difficult the biominerals study and the in situ demonstrating of biodeterioration processes. Multidisciplinary works are required to understand the whole process. Thus, studies in heritage buildings have taken advantage of previous knowledge acquired thanks to laboratory experiments, investigations carried out on rock outcrops and within caves from some years ago. With the extrapolation of such knowledge to heritage buildings and the advances in laboratory techniques, there has been a huge increase of knowledge regarding biomineralisation and biodeterioration processes in stone monuments during the last 20 years. These advances have opened new debates about the implications on conservation interventions, and the organism's role in stone conservation and decay. This is a review of the existing studies of biominerals formation, biodeterioration on laboratory experiments, rocks, caves, and their application to building stones of monuments.

Design and Development of Fluorinated and Biocide-Free Sol–Gel Based Hybrid Functional Coatings for Anti-Biofouling/Foul-Release Activity

Biofouling has destructive effects on shipping and leisure vessels, thus producing severe problems for marine and naval sectors due to corrosion with consequent elevated fuel consumption and higher maintenance costs. The development of anti-fouling or fouling release coatings creates deterrent surfaces that prevent the initial settlement of microorganisms. In this regard, new silica-based materials were prepared using two alkoxysilane cross-linkers containing epoxy and amine groups (i.e., 3-Glycidyloxypropyltrimethoxysilane and 3-aminopropyltriethoxysilane, respectively), in combination with two functional fluoro-silane (i.e., 3,3,3-trifluoropropyl-trimethoxysilane and glycidyl-2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9-hexadecafluorononylether) featuring well-known hydro repellent and anti-corrosion properties. As a matter of fact, the co-condensation of alkoxysilane featuring epoxide and amine ends, also mixed with two opportune long chain and short chain perfluorosilane precursors, allows getting stable amphiphilic, non-toxic, fouling release coatings. The sol–gel mixtures on coated glass slides were fully characterized by FT-IR spectroscopy, while the morphology was studied by scanning electron microscopy (SEM), and atomic force microscopy (AFM). The fouling release properties were evaluated through tests on treated glass slides in different microbial suspensions in seawater-based mediums and in seawater natural microcosms. The developed fluorinated coatings show suitable antimicrobial activities and low adhesive properties; no biocidal effects were observed for the microorganisms (bacteria).

Cyanobacteria and microalgae growing on monuments of UNESCO World Heritage site Champaner Pavagadh, India: biofilms and their exopolysaccharide composition

The present study investigated the biofilm organisms growing on selected monuments of the Champaner Pavagadh complex (Gujarat, India), which is a UNESCO World Heritage Site. The cyanobacteria and microalgae were isolated from biofilms collected through non-destructive methods. The identification of these biological organisms was done using micro-morphological characters and confirmed by 16S rRNA gene sequencing. The exopolysaccharide of each of the isolated strains was extracted, hydrolysed and analysed by the HPTLC. Six isolated strains representing five cyanobacteria and one microalga belong to the genera Desmonostoc, Nostoc, Leptolyngbya, Chroococcidiopsis and Asterarcys. The relationships between substrates' specificity of these isolated biofilm organisms and those identified globally were evaluated using maximum parsimony analysis to generate a consensus phylogenetic tree. The five strains of cyanobacteria isolated were closely clustered with cyanobacteria belonging to a tropical region. At the generic level, no relationship between the species and substratum specificity was recorded. The exopolysaccharide analysis of the isolated strains revealed the presence of seven monosaccharides. While glucose was present in all the analysed species, the concentration of either fucose or arabinose was high. The current study presents a novel HPTLC-based method for determination of monosaccharides composition from the extracellular polymeric substances.

NOTIFy (non-toxic lyophilized field)-FISH for the identification of biological agents by Fluorescence in situ Hybridization

The rapid and reliable diagnostics of highly pathogenic bacteria under restricted field conditions poses one of the major challenges to medical biodefense, especially since false positive or false negative reports might have far-reaching consequences. Fluorescence in situ hybridization (FISH) has the potential to represent a powerful microscopy-based addition to the existing molecular-based diagnostic toolbox. In this study, we developed a set of FISH-probes for the fast, matrix independent and simultaneous detection of thirteen highly pathogenic bacteria in different environmental and clinical sample matrices. Furthermore, we substituted formamide, a routinely used chemical that is toxic and volatile, by non-toxic urea. This will facilitate the application of FISH under resource limited field laboratory conditions. We demonstrate that hybridizations performed with urea show the same specificity and comparable signal intensities for the FISH-probes used in this study. To further simplify the use of FISH in the field, we lyophilized the reagents needed for FISH. The signal intensities obtained with these lyophilized reagents are comparable to freshly prepared reagents even after storage for a month at room temperature. Finally, we show that by the use of non-toxic lyophilized field (NOTIFy)-FISH, specific detection of microorganisms with simple and easily transportable equipment is possible in the field.

Microbial Biodeterioration of Cultural Heritage: Events, Colonization, and Analyses

Geochemical cycles result in the chemical, physical, and mineralogical modification of rocks, eventually leading to formation of soil. However, when the stones and rocks are a part of historic buildings and monuments, the effects are deleterious. In addition, microorganisms also colonize these monuments over a period of time, resulting in formation of biofilms; their metabolites lead to physical weakening and discoloration of stone eventually. This process, known as biodeterioration, leads to a significant loss of cultural heritage. For formulating effective conservation strategies to prevent biodeterioration and restore monuments, it is important to know which microorganisms are colonizing the substrate and the different energy sources they consume to sustain themselves. With this view in scope, this review focuses on studies that have attempted to understand the process of biodeterioration, the mechanisms by which they colonize and affect the monuments, the techniques used for assessment of biodeterioration, and conservation strategies that aim to preserve the original integrity of the monuments. This review also includes the "omics" technologies that have started playing a large role in elucidating the nature of microorganisms, and how they can play a role in hastening the formulation of effective conservation strategies.

Characterization of cyanobacteria isolated from biofilms on stone monuments at Santiniketan, India

Cyanobacterial biofilms occurring on the exterior of three stone monuments at Santiniketan, India were analyzed. Species of Scytonema and Tolypothrix were the major components of these biofilms. Identification was obtained by morphometric procedures and 16S rRNA gene sequencing. Biofilms cultured for prolonged periods revealed the presence of several other cyanobacteria belonging to 14 different genera. Cyanobacteria on stone in the tropical environment of India formed a distinct cluster that was quite different from that of cyanobacteria reported for a similar substratum in temperate regions. Absorption spectra of the organisms from Santiniketan showed a high quantity of scytonemin, mycosporine-like amino acids, and carotenoids. All of the organisms survived in a desiccated state and rapidly revived after wetting. The organisms were heterocystous and nitrogenase activity was reactivated within 24 h of wetting by which time heterocysts in their filaments had also appeared.

Combination of adhesive-tape-based sampling and fluorescence in situ hybridization for rapid detection of Salmonella on fresh produce

This protocol describes a simple approach for adhesive-tape-based sampling of tomato and other fresh produce surfaces, followed by on-tape fluorescence in situ hybridization (FISH) for rapid culture-independent detection of Salmonella spp. Cell-charged tapes can also be placed face-down on selective agar for solid-phase enrichment prior to detection. Alternatively, low-volume liquid enrichments (liquid surface miniculture) can be performed on the surface of the tape in non-selective broth, followed by FISH and analysis via flow cytometry. To begin, sterile adhesive tape is brought into contact with fresh produce, gentle pressure is applied, and the tape is removed, physically extracting microbes present on these surfaces. Tapes are mounted sticky-side up onto glass microscope slides and the sampled cells are fixed with 10% formalin (30 min) and dehydrated using a graded ethanol series (50, 80, and 95%; 3 min each concentration). Next, cell-charged tapes are spotted with buffer containing a Salmonella-targeted DNA probe cocktail and hybridized for 15 - 30 min at 55°C, followed by a brief rinse in a washing buffer to remove unbound probe. Adherent, FISH-labeled cells are then counterstained with the DNA dye 4',6-diamidino-2-phenylindole (DAPI) and results are viewed using fluorescence microscopy. For solid-phase enrichment, cell-charged tapes are placed face-down on a suitable selective agar surface and incubated to allow in situ growth of Salmonella microcolonies, followed by FISH and microscopy as described above. For liquid surface miniculture, cell-charged tapes are placed sticky side up and a silicone perfusion chamber is applied so that the tape and microscope slide form the bottom of a water-tight chamber into which a small volume (≤ 500 μL) of Trypticase Soy Broth (TSB) is introduced. The inlet ports are sealed and the chambers are incubated at 35 - 37°C, allowing growth-based amplification of tape-extracted microbes. Following incubation, inlet ports are unsealed, cells are detached and mixed with vigorous back and forth pipetting, harvested via centrifugation and fixed in 10% neutral buffered formalin. Finally, samples are hybridized and examined via flow cytometry to reveal the presence of Salmonella spp. As described here, our "tape-FISH" approach can provide simple and rapid sampling and detection of Salmonella on tomato surfaces. We have also used this approach for sampling other types of fresh produce, including spinach and jalapeño peppers.

Simple adhesive-tape-based sampling of tomato surfaces combined with rapid fluorescence in situ hybridization for Salmonella detection

A simple adhesive-tape-based method for sampling of tomato surfaces was combined with fluorescence in situ hybridization for rapid culture-independent detection of Salmonella strains. Tapes could also be placed face-down on selective agar for on-tape enrichment of captured Salmonella cells. Overlay of cell-charged tapes with small volumes of liquid enrichment media enabled subsequent detection of tape-captured Salmonella via flow cytometry.

Biodeterioration of modern materials in contemporary collections: can biotechnology help?

Contemporary collections frequently contain man-made materials. Although synthetic materials are considered more resistant to chemical, physical and biological damage than natural materials, they can also undergo rapid deterioration. In this Opinion article, we claim that biotechnology can help to identify biodeteriogens and prevent colonisation of polymeric surfaces through the application of biological products that reduce cell adhesion. We report the study of 'Futuro', made in 1965 by the Finnish architect Matti Suuronne. This ski-cabin, constructed of glassfibre-reinforced polyester, polyester-polyurethane, and poly(methylmethacrylate), was significantly degraded by conspicuous growth of microorganisms, identified as Cyanobacteria and Archaea using fluorescent in situ hybridisation. Ultimately, if biodeteriogens are able to adhere to the polymer surfaces, molecules with enzymatic activity can help to prevent the formation of biofilms--a main cause of deterioration--and aid the work of the conservator.

Quantitative detection of Listeria monocytogenes in biofilms by real-time PCR

A quantitative method based on a real-time PCR assay to enumerate Listeria monocytogenes in biofilms was developed. The specificity for L. monocytogenes of primers targeting the listeriolysin gene was demonstrated using a SYBR Green I real-time PCR assay. The number of L. monocytogenes detected growing in biofilms was 6 x 10(2) CFU/cm2.

Design and application of two oligonucleotide probes for the identification of Geodermatophilaceae strains using fluorescence in situ hybridization (FISH)

Bacteria of the family of Geodermatophilaceae are actively involved in the decay processes [Urzì, C. and Realini, M. (1998) Int Biodeterior Biodegrad 42: 45-54; Urzì, C., Salamone, P., Schumann, P., and Stackebrandt, E. (2000) Int J Syst Evol Microbiol 50: 529-536] of stone monuments. Characterization of isolates includes phenotypic, chemotaxonomic and genetic analysis often requiring long-term procedures. The use of specific probes for members of Geodermatophilaceae family could be useful for the easy detection of those strains colonizing rock surfaces and involved in the biodeterioration. Two 16S rRNA-targeted oligonucleotide probes were designed for the specific detection of members of the family Geodermatophilaceae using fluorescence in situ hybridization (FISH); one probe specific for members of the two genera Geodermatophilus/Blastococcus and the second for members of the genus Modestobacter.