Shear stability of sodium caseinate emulsions containing monoglyceride and triglyceride crystals

Plant-based whipping cream: A promising sustainable alternative to dairy products

Future food is dedicated to transforming the traditional production model of the food industry, making people and the planet healthier, and addressing the challenges facing humanity. The development of plant-based foods is one of the core contents of future food and an important way to achieve green and low-carbon development of the food industry. A prevailing food trend in the dairy industry is the demand to develop various plant-based alternatives to dairy products. Plant-based whipping cream is a complex emulsion-foam system that can be transformed from an oil-in-water emulsion structure to a triphasic (solid-liquid-gas) foam structure by whipping, which should achieve a subtle balance between emulsion stability, whipping destabilization, and foam re-stabilization. This review aims to understand the science and technology underlying the development of plant-based whipping cream. The initial focus is on the fundamental principle of stabilization and destabilization of plant-based whipping cream, as the development of successful products depends on understanding their physicochemical basis. Three main processing technologies for the manufacture of plant-based whipping cream are then introduced: homogenization, sterilization, and tempering. Besides that, the role of the basic ingredients in plant-based whipping cream is highlighted, including vegetable fats, plant proteins, low-molecular-weight emulsifiers, and thickeners. In order to quantify and compare the quality attributes of different plant-based whipping cream products under standardized conditions, we provide an overview of characterization methods to evaluate emulsion stability, whipping destabilization, and foam re-stabilization of plant-based whipping cream. Subsequently, the legislations and regulations related to plant-based whipping cream products are introduced to cater to their market development. Finally, the current challenges faced by plant-based whipping cream are highlighted. This review aims to provide a guidance for researchers and manufacturers in related industries.

Application of soy protein isolate-naringenin complexes as fat replacers in low-fat cream: Based on protein conformational changes, aggregation states and interfacial adsorption behavior

In this study, changes in the structural and functional properties of soybean protein isolate (SPI)-naringenin (NG) complexes under different amounts of naringenin treatments were explored, elucidating the effect of the complexes as fat replacers at the 15 % substitution level on the properties of low-fat cream. Finally, the correlation between the structure and function of the complex and the properties of low-fat cream was further analyzed. The addition of NG promotes the increase of SPI aggregation and particle size, and reduces the interfacial tension of the complex. Meanwhile, at the mass ratio of 48:3, NG and SPI formed a dendritic network structure suitable for stabilizing cream. The fat properties of cream indicate that low-fat creams stabilized by appropriate proportions of SPI-NG complexes displayed small and dense fat crystal network structures. In addition, low-fat cream stabilized by the SPI-NG complexes have improved whipping time, overrun, firmness, storage stability and rheological properties compared to natural SPI. It is worth noting that the overall quality of the cream stabilized by the SPI-NG complex with a mass ratio of 48:3 was almost close to that of full-fat cream. Therefore, this study promotes the potential applications of protein-polyphenol complexes as fat replacers in the food industry.

Recent advances in studying crystallisation of mono- and di-glycerides at oil-water interfaces

This review focuses on the current understanding regarding lipid crystallisation at oil-water interfaces. The main aspects of crystallisation in bulk lipids will be introduced, allowing for a more comprehensive overview of the crystallisation processes within emulsions. Additionally, the properties of an emulsion and the impact of lipid crystallisation on emulsion stability will be discussed. The effect of different emulsifiers on lipid crystallisation at oil-water interfaces will also be reviewed, however, this will be limited to their impact on the interfacial crystallisation of monoglycerides and diglycerides. The final part of the review highlights the recent methodologies used to study crystallisation at oil-water interfaces.

Modulation of the crystallization of rapeseed oil using lipases and the impact on ice cream properties

We investigated the possibility to use rapeseed as a main oil in ice cream formulations by changing its functionality when using different kinds of lipases. Through a 24 h-emulsification and a centrifugation, the modified oils were further used as functional ingredients. All lipolysis was first assessed as a function of time by ¹³C NMR, where triglycerides consumption and the formation of low-molecular polar lipids (LMPL: monoacylglycerol and free fatty acids, FFAs) were selectively identified and compared. The more the FFAs, the sooner the crystallization (from -55 to -10 °C) and the later the melting temperatures (from -17 to 6 °C) measured by differential scanning calorimetry. These modifications were exploited in ice cream formulations with a significant impact on overall hardness (range of 60-216 N) and flowing during defrosting (from 1.29 to 0.35g/min). The global behavior of products can be controlled by the composition of LMPL within oil.

Interplay of Aging and Lot-to-Lot Variability on the Physical and Chemical Properties of Excipients: A Case Study of Mono- and Diglycerides

The present study investigates the chemical composition governing the physical properties of mono- and diglycerides (MDGs) at the microstructural level, as a function of aging and lot-to-lot variability. The physical structure of the MDG plays a vital role in ameliorating the emulsion stability and is widely explored in diverse research horizons related to the pharmaceutical, cosmetic, and food industries. In an effort to understand the mechanism of emulsion stabilization, physical properties were extensively evaluated in selective commercial lots to determine if there is a correlation between the chemical composition of MDG and physical properties. The solid state of the MDG samples with different aging profiles was characterized using X-ray scattering, differential scanning calorimetry, attenuated total reflection-Fourier transform infrared spectroscopy, and NMR relaxometry. Moreover, the kinetic aspect of solid-state transformation was also evaluated via treating MDG samples with a heat-cool cycle. The chemical composition of MDGs was quantified using a quantitative NMR (qNMR) method. Interestingly, the X-ray scattering results demonstrated a change in the MDG polymorphic form and an increase in the %β content as a function of aging. The increase in the %β content led to the formation of rigid crystal structures of MDG, as evident from the NMR relaxometry. Chemical quantification of isomeric composition revealed chemical composition change as a potentially critical factor responsible for the altered physical structures of MDG with respect to aging and lot-to-lot variability. The findings correlated the solid-state transformation with the change in the chemical composition of the MDG as a combined effect of aging and lot-to-lot variability. This work serves as a basis to better understand the interdependency of the physicochemical properties of MDG. Furthermore, the present work can also be used as guidance for setting up the specifications of MDG, as per the required polymorphic form for a multitude of applications.

Interlaboratory Measurement of Rheological Properties of Tomato Salad Dressing

Rheological properties of food materials are important as they influence food texture, processing properties, and stability. Rotational rheometry has been widely used for measuring rheological properties. However, the measurements obtained using different geometries and rheometers are generally not compared for precision and accuracy, so it is difficult to compare data across different studies. In this study, nine rheometers from seven laboratories were used to measure the viscosity and viscoelastic properties of a commercial salad dressing. The measurements were obtained at three temperatures (8, 25, and 60 °C) using different diameter parallel plates (20, 40, 50, and 60 mm). Generally, the viscosity measurements among rheometers differed significantly ( P < 0.05 ). For larger geometry diameter (40, 50, and 60 mm) and at lower temperatures (8 °C), viscosity measurements at lower shear rate (0.01, 0.1, and 1.0 s^-1 ) were significantly different. Rheometer brand significantly affected storage modulus only at low (0.01%) and high levels (10% and 100%) of strain. Temperature was an influencing factor on viscoelastic behaviors only at high strain (>10%). Storage moduli values obtained by frequency sweeps were not affected by rheometer or plate diameter. Overall, rheometer, geometry, and temperature can influence rheological measurements and care should be taken when comparing data across laboratories or published works. Higher shear rates (≥10 s^-1 ) and moderate strains (0.1% to 10%) generally provide more repeatable data among different laboratories. PRACTICAL APPLICATION: This study provides information on what factors may potentially influence rheological measurements conducted across different laboratories. It is useful for rheometer users who want to compare their experimental data to published data or compare two sets of published data. It is better to compare data collected at shear rates 10 s^-1 and strains between 0.1% and 1.0%.

Using Ethylcellulose to Structure Oil Droplets in Ice Cream Made with High Oleic Sunflower Oil

In order to mimic physical characteristics of solid fat, ethylcellulose (EC) was used as an oleogelator in ice creams made with high oleic sunflower oil (HOSO). The aim was to improve structure of ice cream made with fully liquid vegetable oil by inhibiting droplet coalescence and to enable a colloidal fat network by making the oil droplets solid-like. Two different methods for incorporating EC into emulsions were developed, both designed to involve high pressure homogenization of ice cream mixes as in traditional ice cream production. Ice creams based on 10% HOSO and 1% EC (cP10 or cP20) were successfully made. Two types of emulsifiers in the ice cream formulations were tested: unsaturated monoglyceride (GMU) or saturated mono-diglyceride. GMU enhanced fat destabilization of ice cream resulting in coalescence of unstructured HOSO droplets. Presence of EC in HOSO based ice cream inhibited coalescence of oil droplets and the structure of the lipid phase resembled the small, evenly distributed fat globules in the reference ice cream made with saturated coconut fat. The resisting effect toward coalescence increased with higher molecular weight of EC, accordingly oil droplets made with EC cP20 were smaller compared to oil droplets containing EC cP10. EC did not increase the amount of air that was incorporated in ice creams based on HOSO, irrespective of the type of emulsifier. In general the overrun in HOSO-based ice creams (with and without EC) was considerably lower compared to ice cream made with coconut fat.

PRACTICAL APPLICATION

Interest for product development of ice cream based on unsaturated liquid oil is increasing. To compensate for the lacking fat crystals that provide structure and stability in traditional ice cream, the liquid oil is transformed into solid-like material by ethylcellulose (EC). The process of ice cream includes high pressure homogenization, and in order to adapt to this process step, two new methods of incorporation of EC into the oil of ice cream mixes were developed.

Effect of the monostearate/monopalmitate ratio on the oral release of active agents from monoacylglycerol organogels

GMP/GMS organogels are promising systems for oral delivery in functional or medical foods.

Improved Bioavailability of Encapsulated Bioactive Nutrients Delivered through Monoglyceride-Structured O/W Emulsions

Effects of monoglyceride (MG) on the properties of WPI-stabilized emulsions and the bioavailability of encapsulated β-carotene were investigated. MG-structured emulsions showed reduced surface charge, higher viscosity, and better creaming stability than an emulsion without MG. Exposure of emulsions to GIT digestion led to significant changes in droplet size and interfacial properties. In vitro bioavailability of β-carotene in 1% MG (63.9%) and 2% MG (77.1%) structured emulsions were higher than that in emulsion without MG (53.4%) (p < 0.05). All MG emulsions demonstrated a better cellular uptake of β-carotene by Caco-2 cells than the emulsion without MG (p < 0.05). A significant increase in the cellular uptake of β-carotene with increasing MG content was observed, increasing from 0.109 μg/well for the 0.5% MG emulsion and up to 0.138 μg/well for 2% MG emulsion. The findings in this study confirm the potential of the MG-structured emulsions as novel carriers for lipophilic nutrients with improved stability and bioavailability.

Competitive displacement of sodium caseinate by low-molecular-weight emulsifiers and the effects on emulsion texture and rheology

Low-molecular-weight (LMW) emulsifiers are used to promote controlled destabilization in many dairy-type emulsions in order to obtain stable foams in whippable products. The relation between fat globule aggregation induced by three LMW emulsifiers, lactic acid ester of monoglyceride (LACTEM), saturated monoglyceride (GMS), and unsaturated monoglyceride (GMU) and their effect on interfacial protein displacement was investigated. It was found that protein displacement by LMW emulsifiers was not necessary for fat globule aggregation in emulsions, and conversely fat globule aggregation was not necessarily accompanied by protein displacement. The three LMW emulsifiers had very different effects on emulsions. LACTEM induced shear instability of emulsions, which was accompanied by protein displacement. High stability was characteristic for emulsions with GMS where protein was displaced from the interface. Emulsions containing GMU were semisolid, but only low concentrations of protein were detected in the separated serum phase. The effects of LACTEM, GMS, and GMU may be explained by three different mechanisms involving formation of interfacial α-gel, pickering stabilization and increased exposure of bound casein to the water phase. The latter may facilitate partial coalescence. Stabilizing hydrocolloids did not have any effect on the LMW emulsifiers' ability to induce protein displacement.

Fat crystallisation at oil-water interfaces

This review focuses on recent advances in the understanding of lipid crystallisation at or in the vicinity of an interface in emulsified systems and the consequences regarding stability, structure and thermal behaviour. Amphiphilic molecules such as emulsifiers are preferably adsorbed at the interface. Such molecules are known for their ability to interact with triglycerides under certain conditions. In the same manner that inorganic crystals grown on an organic matrix see their nucleation, morphology and structure controlled by the underlying matrix, recent studies report a templating effect linked to the presence of emulsifiers at the oil/water interface. Emulsifiers affect fat crystallisation and fat crystal behaviour in numerous ways, acting as impurities seeding nucleation and, in some cases, retarding or enhancing polymorphic transitions towards more stable forms. This understanding is of crucial importance for the design of stable structures within emulsions, regardless of whether the system is oil or water continuous. In this paper, crystallisation mechanisms are briefly described, as well as recent technical advances that allow the study of crystallisation and crystal forms. Indeed, the study of the interface and of its effect on lipid crystallisation in emulsions has been limited for a long time by the lack of in-situ investigative techniques. This review also highlights reported interfacial effects in food and pharmaceutical emulsion systems. These effects are strongly linked to the presence of emulsifiers at the interface and their effects on crystallisation kinetics, and crystal morphology and stability.

Comparison of Pickering and network stabilization in water-in-oil emulsions

We compared the efficacy of Pickering crystals, a continuous phase crystal network, and a combination thereof against sedimentation and dispersed phase coalescence in water-in-oil (W/O) emulsions. Using 20 wt % water-in-canola oil emulsions as our model, glycerol monostearate (GMS) permitted Pickering-type stabilization, whereas simultaneous usage of hydrogenated canola oil (HCO) and glycerol monooleate (GMO) primarily led to network-stabilized emulsions. A minimum of 4 wt % GMS or 10 wt % HCO was required for long-term sedimentation stability. Although there were no significant differences between the two in mean droplet size with time, the free water content of the network-stabilized emulsions was higher than Pickering-stabilized emulsions, suggesting higher instability. Microscopy revealed the presence of crystal shells around the dispersed phase in the GMS-stabilized emulsions, whereas in the HCO-stabilized emulsion, spherulitic growth in the continuous phase and on the droplet surface occurred. The displacement energy (E(disp)) to detach crystals from the oil-water interface was ∼10(4) kT, and was highest for GMS crystals. Thermal cycling to induce dispersed phase coalescence of the emulsions resulted in desorption of both GMS and GMO from the interface, which we ascribed to solute-solvent hydrogen bonding between the emulsifier molecules and the solvent oil, based on IR spectra. Overall, Pickering crystals were more effective than network crystals for emulsion stabilization. However, the thermal stability of all emulsions was hampered by the diffusion of the molten emulsifiers from the interface.

Shear-induced instabilities in oil-in-water emulsions comprising partially crystallized droplets

We produced triglyceride-in-water emulsions comprising semicrystallized droplets, stabilized by a mixture of protein and low molecular weight surfactant. In these systems, partial (unrelaxed) coalescence could be produced by a thermal treatment referred to as tempering or by the application of a shear. Both primary emulsions and thermally induced gels were submitted to shear strains of variable amplitude, and the resulting transitions were identified. Partial or total destruction of the materials took place and was revealed by the formation of macroscopic clumps. We examined the impact of the initial average droplet size and of the interface composition (controlled by the bulk surfactant-to-protein molar ratio) on the sensitivity to partial coalescence. The evolution under shear occurred via two limiting mechanisms, depending on the susceptibility to partial coalescence. Materials that exhibited fast partial coalescence underwent gelling followed by phase inversion and partial expulsion of the aqueous phase. Alternatively, when the rate of partial coalescence was quite low, large clumps were randomly distributed over the volume and coexisted with a fluid emulsion. The same phenomenology was observed under both oscillatory and steady shear conditions. Interestingly, in oscillatory conditions, clumping was observed above a very well-defined and reproducible value of the strain amplitude independent of the initial state of the system (emulsion or gel).

Nanosecond dynamics of photoexcited lyotropic liquid crystal structures

Home-based soft X-ray time-resolved diffraction (TR-SXD) experiments with nanosecond time resolution (10 ns) and nanometer spatial resolution were carried out at a tabletop soft X-ray plasma source (2.7-5.9 nm). The investigated system was the lyotropic liquid crystal C(16)E(7)/paraffin/glycerol/formamide/IR 5. Usually, major changes in physical, chemical, and/or optical properties of the sample result from structural changes and shrinking morphology. Here, these effects occur as a consequence of the energy absorption in the sample upon optical laser excitation in the IR regime. The variations observed are integral intensity modulations and displacement in the Bragg diffraction angle. To follow the diffracted integral intensity changes, Patterson analysis was used, and the lattice parameter d variations have been followed by applying the Bragg diffraction law. The experimental intensity modulations occur on the nanosecond time scale, and they are assigned to photoinduced diffusion processes within the liquid crystalline phase. The structural response after photoexcitation is experimentally observed as an increase of the lattice constant by 0.5-1 A and is interpreted as a decrease of order in the liquid crystalline phase. This coincides with a reorientation to a photocreated liquid crystal lattice in the surface plane and with respect to the E-field vector of the laser light. The present studies emphasize the possibility of using TR-SXD techniques for studying the transient mechanical dynamics of nanosystems at the submicrosecond time scale.

Factors governing partial coalescence in oil-in-water emulsions

The consequences of the instability mechanism partial coalescence in oil-in-water food emulsions show a discrepancy. On the one hand, it needs to be avoided in order to achieve an extended shelf life in food products like sauces, creams and several milk products. On the other hand, during the manufacturing of products like ice cream, butter and whipped toppings partial coalescence is required to achieve the desired product properties. It contributes to the structure formation, the physicochemical properties (stability, firmness,...) and the sensory perception, like fattiness and creaminess of the final food products. This review critically summarises the findings of partial coalescence in oil-in-water emulsions in order to provide insight in how to enhance and retard it. Next to the pioneering work, a large set of experimental results of more recent work is discussed. First, the general mechanism of partial coalescence is considered and a distinction is made between partial and 'true' coalescence. The main differences are: the required solid particles in the dispersed oil phase, the formation of irregular clusters and the increased aggregation rate. Second, the kinetics of partial coalescence is discussed. In more detail, potential parameters affecting the rate of partial coalescence are considered by means of the encounter frequency and capture efficiency of the fat globules. The flow conditions, the fat volume fraction and the physicochemical properties of continuous aqueous phase affect both the encounter frequency and capture efficiency while the actual temperature, temperature history and the composition and formulation of the emulsion mainly affect the capture efficiency.

Time-resolved soft X-ray diffraction reveals transient structural distortions of ternary liquid crystals

Home-based soft X-ray time-resolved scattering experiments with nanosecond time resolution (10 ns) and nanometer spatial resolution were carried out at a table top soft X-ray plasma source (2.2-5.2 nm). The investigated system was the lyotropic liquid crystal C(16)E(7)/paraffin/glycerol/formamide/IR 5. Usually, major changes in physical, chemical, and/or optical properties of the sample occur as a result of structural changes and shrinking morphology. Here, these effects occur as a consequence of the energy absorption in the sample upon optical laser excitation in the IR regime. The liquid crystal shows changes in the structural response within few hundred nanoseconds showing a time decay of 182 ns. A decrease of the Bragg peak diffracted intensity of 30% and a coherent macroscopic movement of the Bragg reflection are found as a response to the optical pump. The Bragg reflection movement is established to be isotropic and diffusion controlled (1 micros). Structural processes are analyzed in the Patterson analysis framework of the time-varying diffraction peaks revealing that the inter-lamellar distance increases by 2.7 A resulting in an elongation of the coherently expanding lamella crystallite. The present studies emphasize the possibility of applying TR-SXRD techniques for studying the mechanical dynamics of nanosystems.