Copper(II) and nickel(II) uptake from aqueous solutions by cork wastes: a NMR and potentiometric study

Chelating Agents in Soil Remediation: A New Method for a Pragmatic Choice of the Right Chelator

Soil pollution by metal ions constitutes one of the most significant environmental problems in the world, being the ecosystems of extended areas wholly compromised. The remediation of soils is an impelling necessity, and different methodologies are used and studied for reaching this goal. Among them, the application of chelating agents is one of the most promising since it could allow the removal of metal ions while preserving the most meaningful properties of the original soils. The research in this field requires the joined contribute of different expertise spanning from biology to chemistry. In this work, we propose a parsimonious and pragmatic approach for screening among a range of potential chelating agents. This methodology, the Nurchi's method, is based on an extension of the Reilley procedure for EDTA titrations. This allows forecasting the binding ability of chelating agents toward the target polluting metal ions and those typically found in soils, based on the knowledge of the related protonation and complex formation constants. The method is thoroughly developed, and then tested by application to some representative cases. Its use and relevance in biomedical and industrial applications is also discussed.

Study of two cork species as natural biosorbents for five selected pesticides in water

The present study evaluates biosorption efficiencies of pesticides atrazine, fluazifop-P-butyl, lactofen, lambda-cyhalothrin and chloropyrifos on corks of Quercus cerris and Quercus suber trees. The studies were carried out in batch and effects of pH (3, 7 and 9), temperature (10, 20, 30 and 40 °C), and time on adsorption were measured. Pesticide analyzes were performed with an Ion-trap Mass Spectrometer following the SANCO/10232/2006 EU extraction protocol for pesticides. The results show that the highest adsorption efficiency (80% and 70%) of the pesticides was found at pH 3, 30 °C and 360 minutes. The adsorption kinetics of pesticides followed pseudo-second order and pseudo-first order kinetics. The results obtained in this study show that Q. cerris and Q. suber corks can be used to develop efficient and economical cork-based alternatives for the treatment of environments contaminated with pesticides.

Structure characterization of the non-crystalline complexes of copper salts with native cyclodextrins

The characterization of non-crystalline complexes is very difficult when techniques like X-ray diffraction or NMR are not available. We propose a simple procedure to characterize the physicochemical properties of amorphous new coordination compounds between cyclodextrins (CD) and Cu²⁺ salts, by several techniques as TGA, FT-IR, EPR.

Advancements in waste water characterization through NMR spectroscopy: review

There are numerous organic pollutants that lead to several types of ecosystem damage and threaten human health. Wastewater treatment plants are responsible for the removal of natural and anthropogenic pollutants from the sewage, and because of this function, they play an important role in the protection of human health and the environment. Nuclear magnetic resonance (NMR) has proven to be a valuable analytical tool as a result of its versatility in characterizing both overall chemical composition as well as individual species in a wide range of mixtures. In addition, NMR can provide physical information (rigidity, dynamics, etc.) as well as permit in depth quantification. Hyphenation with other techniques such as liquid chromatography, solid phase extraction and mass spectrometry creates unprecedented capabilities for the identification of novel and unknown chemical species. Thus, NMR is widely used in the study of different components of wastewater, such as complex organic matter (fulvic and humic acids), sludge and wastewater. This review article summarizes the NMR spectroscopy methods applied in studies of organic pollutants from wastewater to provide an exhaustive review of the literature as well as a guide for readers interested in this topic.

New insights into the interactions between cork chemical components and pesticides. The contribution of π-π interactions, hydrogen bonding and hydrophobic effect

The role of chemical components of cork in the sorption of several pesticides has been investigated. For this purpose raw cork and three cork extracted fractions (i.e. cork free of aliphatic extractives, cork free of all extractives and cork free of all extractives and suberin) were used as sorbent of three ionic pesticides (propazine, 2,4-dichlorophenoxy acetic acid (2,4-D) and alachlor) and five non-ionic pesticides (chlorpyrifos, isoproturon, metamitron, methomyl and oxamyl) with a logKow within the range -0.47 to 4.92. The effect of cations on the ionic pesticides, propazine and 2,4-D sorption was also analyzed. Results indicated that the highest yields were obtained for chlorpyrifos and alachlor sorption onto raw cork (>55%). After removal of aliphatic extractives sorption of all pesticides increased that ranged from 3% for propazine to 31% for alachlor. In contrast, removal of phenolic extractives caused a sorption decrease. Low sorption yields were obtained for hydrophobic pesticides such as metamitron, oxamyl and methomyl (<11%) by using all cork fractions and extremely low when using raw cork (<1%). FTIR analysis was useful to indicate that lignin moieties were the main components involved on the sorption process. Modelling calculations evidenced that π-stacking interactions with the aromatic groups of lignin play a major role in determining the adsorption properties of cork toward aromatic pesticides. Results presented in this paper gain insights into the cork affinities for pesticides and the interactions involved in the sorption process and also enables to envisage sorption affinity of cork for other organic pollutants.

Use of cork powder and granules for the adsorption of pollutants: a review

Cork powder and granules are the major subproducts of the cork industry, one of the leading economic activities in Portugal and other Mediterranean countries. Many applications have been envisaged for this product, from cork stoppers passing through the incorporation in agglomerates and briquettes to the use as an adsorbent in the treatment of gaseous emissions, waters and wastewaters. This paper aims at reviewing the state of the art on the properties of cork and cork powder and their application in adsorption technologies. Cork biomass has been used on its original form as biosorbent for heavy metals and oils, and is also a precursor of activated carbons for the removal of emerging organic pollutants in water and VOCs in the gas phase. Through this literature review, different potential lines of research not yet explored can be more easily identified.

Adsorption equilibria of water vapor on cork

We report here for the first time a complete thermodynamic study of water vapor adsorption on crude cork powder and plate. Adsorption-desorption isotherms were accurately measured by thermogravimetry at 283, 298, and 313 K in a large range of relative pressure. Adsorption enthalpies were determined by calorimetry as a function of loading. Adsorption-desorption isotherms exhibit a hysteresis due to the swelling of the material. The influence of the presence of lenticels on the adsorption properties of cork is found to be negligible. A detailed analysis and interpretation of adsorption data allow proposal of an adsorption mechanism in two steps. (i) First, water adsorbs on hydrophilic sites constituted by hydroxyl and methoxyl groups. (ii) Then water adsorption continues by clusters formation around the hydrophilic sites.

Metal ion uptake from aqueous solution by olive stones: a carbon-13 solid-state nuclear magnetic resonance and potentiometric study

The use of biomasses that result from the agriculture and food industries in removing heavy metals from wastewaters is attracting increasing interest. We present a joined potentiometric and cross polarization magic angle spinning (CP-MAS) carbon-13 (13C) nuclear magnetic resonance (NMR) study on the interaction of olive stones with copper(II), nickel(II), and cadmium(II). The potentiometric measurements allow both to distinguish two kind of basic sites in the olive stones and to postulate the coordination models for the three studied metals. The NMR spectral analysis allows the attribution of the different signals to the components of the olive stone matrix. A comparison of CP-MAS 13C NMR spectra of the samples after metal treatment suggests a specific complexation between metal ions and hydroxyl groups on guaiacyl and syringyl moieties.