Maintenance of proximal bone mass with an uncemented femoral stem analysis with dual-energy x-ray absorptiometry

In-silico modelling of multi-strike insertion and torsional resistance of tapered revision hip stems: Insight into spline design philosophy

Despite the clinical success of tapered splined titanium stems, a knowledge gap still exists between spline design and its primary mechanical stability, which is critical to the long-term success of revision hip arthroplasty. Additionally, almost all published pre-clinical studies relied on resource-intensive benchtop and cadaveric testing. Hence, the present study developed a novel computational model to investigate effects of spline geometry and configuration on axial and torsional stability of tapered stem. Dynamic explicit Finite Element Analysis coupled with a state-of-the-art adaptive meshing technique was used to simulate the highly non-linear contacts and large bony material deformations. Hybridising primary straight splines with secondary angled splines results in 41% and 10% increases of peak insertion force and post-seating moment than the predicate device for the same seating position. The primary straight splines cut at multiple circumferential bony locations, enhancing torsional stability; while the alternatively placed secondary angled splines form wedges with the bone, providing reliable seating and additional torsional resistance. To the best knowledge of the author, this is the first in-silico investigation of its kind to simulate multi-strike seating and torsional resistance of revision hip stems, offering an effective and efficient platform for future multi-factorial parametric study and uncertainty quantification.

Short-term success of proximal bone stock preservation in short hip stems: a systematic review of the literature

Total hip arthroplasty is performed more frequently in younger patients nowadays, making long-term bone stock preservation an important topic. A mechanism for late implant failure is periprosthetic bone loss, caused by stress shielding around the hip stem due to different load distribution. Short stems are designed to keep the physical loading in the proximal part of the femur to reduce stress shielding. The aim of this review is to give more insight into how short and anatomic stems behave and whether they succeed in preservation of proximal bone stock.

A systematic literature search was performed to find all published studies on bone mineral density in short and anatomic hip stems. Results on periprosthetic femoral bone mineral density, measured with dual-energy X-ray absorptiometry (DEXA), were compiled and analysed per Gruen zone in percentual change.

A total of 29 studies were included. In short stems, Gruen 1 showed bone loss of 5% after one year (n = 855) and 5% after two years (n = 266). Gruen 7 showed bone loss of 10% after one year and –11% after two years. In anatomic stems, Gruen 1 showed bone loss of 8% after one year (n = 731) and 11% after two years (n = 227). Gruen 7 showed bone loss of 14% after one year and 15% after two years.

Short stems are capable of preserving proximal bone stock and have slightly less proximal bone loss in the first years, compared to anatomic stems.

Cite this article: EFORT Open Rev 2021;6:1040-1051. DOI: 10.1302/2058-5241.6.210030

Comparison of Bone Preservation in Elderly Patients with Femoral Neck Fracture After Bipolar Hemiarthroplasty Using Shorter Femoral Stem and Standard Femoral Stem

BACKGROUND

This randomized control study was designed to compare the clinical and radiological outcomes, including periprosthetic bone mineral density (BMD) changes, between the short and standard stems after using cementless hemiarthroplasty in elderly patients with femur neck fractures.

MATERIALS AND METHODS

From January 2013 to May 2017, 151 patients (aged ≥ 65 years) underwent hemiarthroplasties due to femoral neck fractures. Patients were randomized into two groups; 77 patients in Group A implanting the short femoral stem and 74 patients in Group B implanting the standard femoral stem. Clinical and radiographic evaluations were performed in all patients.

RESULTS

75 patients (40 patients in Group A and 35 patients in Group B) completed routine follow-up for a minimum of 2 years. The clinical outcomes, including ambulatory functions and thigh pain, were similar in both groups. All the femoral stems acquired radiologic stability. At postoperative one year, BMD values in Gruen zone (G) seven on the standard stem side were significantly lower than those on the short stem side (P = 0.038). At the second year of follow-up, the BMD values of Group A in G1, G3, G4, and G7 were significantly greater than those of Group B (P = 0.007, 0.032, 0.026, and P < 0.000, respectively).

CONCLUSIONS

Both the clinical outcomes and radiologic stability in both group demonstrated similar results in elderly patients with femoral neck fracture at the latest follow-up. In addition, the periprosthetic BMD of the short femoral stems demonstrated better periprosthetic bone preservation at a minimum of 2 years of follow-up.

LEVEL OF EVIDENCES

Therapeutic Level II.

Single 3° tapered fluted femoral stems demonstrate low subsidence at mid-term follow-up in severe bony deficiency

Background

Tapered femoral stems have become popular in revision total hip arthroplasty (rTHA). Increasing the distal taper angle may mitigate subsidence. This study reports osseointegration of a new 3 degree distal taper revision stem at minimum 4 years post-operatively.

Methods

Indication for surgery, pre-operative bony deficiency and latest clinical, tribological and radiological follow-up were analysed. Radiographs were assessed by two blinded observers for preoperative femoral bone stock according to Paprosky, postoperative subsidence according to Callaghan and restoration of femoral bone stock over time according to Kolstad. Stem integration was determined using the Rodriguez classification.

Results

Twenty-three cases were analyzed at 5.9±1.0 years. All patients presented with Paprosky III defects. All stems met the criteria for osseointegration. Spot welds occurred distal to the proximal modular junction and at the tip. Two femora with severe proximal femoral bone loss recovered bone stock by final follow-up but two demonstrated stress shielding. No intraoperative fractures occurred. One stem subsided early but remained stable and osseointegrated at final follow up. There were no stem failures due to taper corrosion or modular junctional failure.

Conclusions

This study reports good osseointegration and low subsidence with a novel fluted, 3-degree tapered femoral stem demonstrates at medium-term follow-up in cases with severe femoral bone deficiency.

Dual offset metaphyseal-filling stems in primary total hip arthroplasty in dysplastic hips after a minimum follow-up of ten years

PURPOSE

The aim of this study was to assess the long-term performance of tapered one-third proximally coated stems in dysplastic hips.

METHODS

This study included 135 dysplasia patients (150 hips) who underwent a total hip arthroplasty and had a minimum follow-up of ten years. Single design tapered stems were used in all patients. There were 112 women (83%) and 23 men (17%) with a mean age of 45 years (23 to 72) at the time of surgery. The mean follow-up was 14.7 years (10 to 16.8). For clinical evaluation, the Harris Hip Score and Merle D'Aubigne scale were used pre-operatively and at the final follow-up. Implant survival was calculated using Kaplan-Meier survivorship analysis, with failure defined as a component revision for any reason.

RESULTS

Overall, one stem was revised for a deep infection. There were no other femoral stem revisions secondary to loosening, wear, periprosthetic fracture, or instability. Radiographic evaluation showed excellent stem osteointegration in all cases. Kaplan-Meier survivorship, with stem revision for any reason as the end point, was 98% at 14 years (95% confidence interval 92.5 to 99.8).

CONCLUSION

This study demonstrates that a dual offset tapered stem achieved excellent survivorship and stability, as well as good clinical outcome scores with minimal thigh pain and stress shielding in patients with arthritis and developmental dysplasia of the hip; a dual offset tapered stem may be a suitable option for primary total hip arthroplasty in this group.

Densitometric evaluation of bone-prosthetic counterface in hip and knee arthroplasty with modern implants

INTRODUCTION

Recent acquisitions of the complex mechanisms of osseointegration between implants and host bone have gained attention, accordingly to the methods of evaluation of these interactions. DEXA analysis is considered an useful tool to assess such phenomena, in order to analyse in a quantitative manner the local metabolic activity of the bone, and to evaluate over the time the integration between host bone and prosthetic components. The purpose of the present study is to report about a preliminary experience in the analysis of osseointegration processes of patients undergoing a primary Total Hip Arthroplasty (THA) or a revision Total Knee Arthroplasty (rTKA).

MATERIALS AND METHODS

Thirty patients undergoing THA and nineteen undergoing rTKA were included in this study. In fifteen cases of THA a standard cementless stem was used; in the other fifteen a short cementless stem was chosen. In all cases a cementless cup was implanted. In all patients undergoing rTKA, all implants had pressfit femoral and tibial diaphyseal stems; only the femoral component and the tibial plateau were cemented. DEXA evaluation was performed preoperatively, and at 3, 6, 12, and 24 months postoperatively for rTKA, and at 6 and 12 months for THA.

RESULTS

DEXA in THA showed a significant decrease at the femoral ROIs 1 and 7, and an increase in ROI 4. In rTKA a reduction of femoral BMD in R1, R7, and R4 was found, with maximum values of -13.6% in R1 and -11.89% in R7 at 24 months and a value of -2.55% in R4 at 12 months. On the tibial side, an increase in BMD R4 (with values of 2.18% still at 24 months), and a reduction in R7 (progressively lesser over the time) and in R1 (progressively higher) were found.

CONCLUSIONS

After a joint replacement a full adhesion of the prosthetic surface to the host bone should be achieved through a local biological process named osseointegration. In some cases this process may not fully realize, so the secondary stability of the implant may fail. DXA is a valuable tool to follow over time the bone remodelling at the bone-prosthesis counterface in THA and in rTKA, in order to early detect any alterations of such phenomenon.

Periprosthetic Bone Remodeling After Novel Short-Stem Neck-Sparing Total Hip Arthroplasty

BACKGROUND

Short femoral stems have been designed with the aims of reducing proximal bone loss, improving load transfer, and increasing compressive loads at the medial proximal femoral calcar. This study examines bone mineral density (BMD) changes associated with a novel neck sparing short femoral stem design.

METHODS

The study was a prospective, single-center, multi-investigator consecutive series, which assessed bone-remodeling changes after insertion of the MSA Stem (Global Orthopaedic Technology). Dual-energy X-ray absorptiometry scans were performed preoperatively and postoperatively at 6, 12, and 24 months assessing the BMD at the 7 Gruen zones. The secondary objectives assessed were the Harris Hip Score, 12-Item Short Form Health Survey preoperatively, and perioperative complications.

RESULTS

Thirty-nine total hip arthroplasties were performed on 37 patients, with 27 patients completing the 24-month dual-energy X-ray absorptiometry scan. The overall preoperative baseline BMD was 0.2. At 6 months, the Gruen zone BMD had increased significantly in all zones in comparison to the preoperative mean BMD. Between 6 months and 24 months, there were only slight changes in the Gruen zones, with small gains in zones 1-2 and zones 4-6, with no zone showing a significant decrease. The Harris Hip Score improved from a preoperative mean of 39.7-75.3, whereas the 12-Item Short Form Health Survey score also improved from 32.6 to 49 at 24 months. However, 5 patients had aseptic loosening requiring revision surgery (4 femoral and 1 acetabular component).

CONCLUSION

Short-stem neck-sparing femoral stem prosthesis has the capacity to address the stress-shielding problem identified in femoral stems. However, the high early revision rate is a significant issue.

An In Vitro Comparison of the Primary Stability of 2 Tapered Fluted Femoral Stem Designs

BACKGROUND

Proximal bony deficiencies present a biomechanical challenge to achieving primary stability in revision hip arthroplasty. Long tapered fluted stems have been engineered to span these defects but concerns of early subsidence are well documented. This work aimed primarily to investigate the issue of subsidence with this design using a cadaveric model. A secondary aim was to compare the stability of 2 versions of this design.

METHODS

Seven pairs of cadaveric femora were obtained, dual emission x-ray absorpitometry scanned, with calibration radiographs taken for digital templating. Each bone was potted according to the ISO standard for fatigue testing and a Paprosky type 3 defect was simulated. The established cone-conical Restoration Modular (Stryker) system and a novel design with a chamfered tip and flute configuration (Redapt, Smith & Nephew) were examined. Movement at the stem-bone interface was measured using radiostereometric analysis and micromotion transducers.

RESULTS

All restoration stems and 85% of the Redapt stems achieved stability by recognized criteria, micromotion < 150 μm and migration less than 2 mm. A Fisher exact test comparing the proportion of stems which were stable or unstable was not significant, P = .055. Mean axial subsidence (SD) was 0.17 mm (0.32) and 0.1 mm (0.131) for the Restoration and Redapt stems respectively.

CONCLUSION

This study has demonstrated minimal subsidence in the immediate post-operative period using tapered fluted stems. Both designs achieved excellent stability despite simulation of Paprosky type 3 bony defects in the cadaveric model. This geometry appears satisfactory for use in revision surgery in the presence of significant proximal bony deficiencies.

Periprosthetic BMD after cemented and uncemented total hip arthroplasty: a 10-year follow-up study

BACKGROUND AND PURPOSES

Insertion of a metallic implant into the femur changes bone loading conditions and results in remodeling of femoral bone. To quantify these changes in bone mineral density (BMD) after total hip arthroplasty, we monitored femoral bone with dual X-ray absorptiometry (DXA).

MATERIALS AND METHODS

The periprosthetic bone mineral density was measured in seven Gruen zones at scheduled time intervals during a 10-year follow-up. A total of 38 patients went through either cemented (n = 13) or uncemented arthroplasty (n = 25).

RESULTS

During the 1st post-operative year BMD decreased markedly in both groups mainly in the calcar area (Gruen zone 7); 21.9 % in the uncemented group (p < 0.005) and 26.1 % in the cemented group (p < 0.005). After that there was a slight continuous BMD loss in the proximal part of the femur and a slight increase in the distal part of femur, especially after uncemented THA. In the non-operated control side, BMD showed only a slight decrease during the follow-up (0.9 %, p = 0.003).

INTERPRETATION

The study shows that when a good prosthesis-bone integration with or without cement is achieved, remodeling of the periprosthetic bone decreases after the 1st post-operative year and the bone loss reflects merely normal ageing.

Predicting Bone Remodeling in Response to Total Hip Arthroplasty: Computational Study Using Mechanobiochemical Model

Periprosthetic bone loss following total hip arthroplasty (THA) is a serious concern leading to the premature failure of prosthetic implant. Therefore, investigating bone remodeling in response to hip arthroplasty is of paramount for the purpose of designing long lasting prostheses. In this study, a thermodynamic-based theory, which considers the coupling between the mechanical loading and biochemical affinity as stimulus for bone formation and resorption, was used to simulate the femoral density change in response to THA. The results of the numerical simulations using 3D finite element analysis revealed that in Gruen zone 7, after remarkable postoperative bone loss, the bone density started recovering and got stabilized after 9% increase. The most significant periprosthetic bone loss was found in Gruen zone 7 (−17.93%) followed by zone 1 (−13.77%). Conversely, in zone 4, bone densification was observed (+4.63%). The results have also shown that the bone density loss in the posterior region of the proximal metaphysis was greater than that in the anterior side. This study provided a quantitative figure for monitoring the distribution variation of density throughout the femoral bone. The predicted bone density distribution before and after THA agree well with the bone morphology and previous results from the literature.

Follow-up results of 10-12 years after total hip arthroplasty using cementless tapered stem -- frequency of severe stress shielding with synergy stem in Japanese patients

Synergy stems are tapered stems featuring a proximal porous coating, grid blasting below the proximal third to the distal end. This study included 41 patients (50 hips) who underwent total hip arthroplasty with follow-ups for 10 years or more. No stem reimplantations were performed. Spot welds were observed in the distal stem in Gruen zones 3 and 5 in 35 and 32 hips, respectively. First-degree stress shielding occurred in 8 hips; 2nd-degree, 20 hips; 3rd-degree, 13 hips; and 4th-degree, 9 hips. Because of bone fixation to the distal grit-blasted section of the stem, severe stress shielding was observed in nearly half of the cases. Multiple regression analysis of stress shielding determinants revealed a correlation between stem size and short patient height, showing the cause of stress shielding to be a mismatch in size between the stem and the femoral bone.

Stable, dependable fixation of short-stem femoral implants at 5 years

Conventional uncemented femoral implants provide dependable long-term fixation in patients with a wide range of clinical function. However, challenges with proximal-distal femoral mismatch, preservation of bone stock, and minimally invasive approaches have led to exploration into various other implant designs. Short-stem designs focusing on a stable metaphyseal fit have emerged to address these challenges in total hip arthroplasty (THA). The purpose of this study was to present the 5-year clinical and radiographic results of a computed tomography-based, custom-made, metaphyseal-engaging short-stem femoral implant.Sixty-one patients with an average age of 61 years (range, 22-75 years) and average body mass index of 28.9 kg/m(2) (range, 20.3-44.1 kg/m(2)) at follow-up underwent 69 THAs with the metaphyseal-engaging short stem. Clinical performance was evaluated using the Harris Hip Score and Western Ontario and McMaster Universities Arthritis Index score, and radiographs were reviewed for stability and bony ingrowth. Harris Hip Score averaged 55 (range, 20-90) preoperatively and 96 (range, 55-100) postoperatively. Western Ontario and McMaster Universities Arthritis Index score averaged 51 (range, 13-80) preoperatively and 3 (range, 0-35) postoperatively. No cases of subsidence were observed, and no revision surgeries were performed. Bone remodeling was typified by endosteal condensation and cortical hypertrophy in Gruen zones 2, 3, 5, and 6. At 5-year follow-up, the uncemented, metaphyseal-engaging short stem was stable and exhibited proximal bone remodeling closer to the metaphysis than conventional stems. Short-stem, metaphyseal-engaging femoral implants can meet the goals of a successful THA.

Periprosthetic Bone Turnover after Primary Total Hip Arthroplasty Measured by Single-Photon Emission Computed Tomography

Background and Aims:

Alterations in periprosthetic bone are common sequlae of prosthetic implants. This prospective 3-year study was performed to follow regional periprosthetic bone turnover after uncomplicated total hip arthroplasty (THA) using single-photon emission computed tomography (SPECT).

Material and Methods:

Eighteen patients (nine men, nine women: mean age 61 years, range from 50 to 73 years) with primary hip osteoarthritis underwent either uncemented or cemented THA. The SPECT measurements were taken 6, 12, and 36 months after THA. B one mineral density (BMD) measurements were performed on the patients during follow-up.

Results:

The mean SPECT uptake ratios decreased significantly in the regions of interest (ROIs) during follow-up compared to baseline value, in the trochanter major (p = 0.006), the trochanter minor (p = 0.009) and the total area (p = 0.018). Despite these decreases the uptake ratios in the medial cortex (p = 0.014), tip (p = 0.002) and total area (p = 0.016) remained significantly higher in the operated side than in the contralateral side (non-operated) 3 years after THA. Changes in bone turnover in the vicinity of the implant did not correlate with changes in periprosthetic BMD.

Conclusions:

Local periprosthetic bone turnover decreased slowly after THA and did not recover to the level typical of non-operated hips. This led us to suggest that bone turnover around the femoral implants remains increased more than 3 years after THA even if there are no signs of failure of the prosthesis.

Femoral Neck Bone Mineral Density after Resurfacing Hip Arthroplasty

Introduction:

Resurfacing hip arthroplasty (RHA) has been suggested to provide an alternative to conventional total hip arthroplasty in younger, active patients. It seems to have an ability to conserve the bone mass on the femoral side. Some controversy exists regarding to the possible disadvantages of RHA and some of them are connected to poor femoral bone quality after surgery. Hence we wanted to study the bone mineral density changes 3 and 12 months after RHA.

Materials and Methods:

A total of 26 patients (22 men and 4 women, 28 hips) underwent a hip resurfacing arthroplasty. The mean age of the patients was 55,2 (range 38–69) years. Bone mineral density (BMD) of the proximal femur was measured by using the dual-energy X-ray absorptiometry (DXA) postoperatively and within 3 and 12 months from surgery. For analysis, we divided the femoral neck area into four equal-sized regions of interest ranging from the prosthesis to the trochanter level.

Results:

At three months follow-up the BMD changes varied between −5.1% (ROIC) and + 1.9% (ROIA), as compared with the immediate postoperative values. After one year follow-up the BMD changes were + 1.1% in the ROIA, + 5.4% in the ROIB, −3.9% in the ROIC and + 1.3% in the ROID. The changes in BMD were not statistically significant.

Discussion:

While there is still much debate and room for additional research in this topic, the results suggest that BMD is conserved in the femoral neck one year after hip resurfacing arthroplasty.

Patterns of osseointegration and remodeling in femoral revision with bone loss using modular, tapered, fluted, titanium stems

Radiographic signs of osseointegration with the use of fluted, tapered, modular, titanium stems in revision hip arthroplasty with bone loss have not been previously categorized. Serial radiographs of 64 consecutive hips with mean follow-up of 6.2 years were retrospectively reviewed. Bone loss was classified as per Paprosky classification, osseointegration was assessed according to a modified system of Engh et al, and Harris Hip Score was used to document pain and function. Seventy-four percent of the hips had type 3 or 4 bone loss. All stems were radiographically osseointegrated. Early minor subsidence was seen in 6.2% of the hips; definite bony regeneration, 73% of the hips; and stress shielding, 26% of the hips. These osseointegration patterns were different from those described for extensively porous-coated cobalt-chromium stems and had a bearing on the evaluation of fixation of these stems.

Periprosthetic bone loss after insertion of an uncemented, customized femoral stem and an uncemented anatomical stem. A randomized DXA study with 5-year follow-up

BACKGROUND AND PURPOSE

Customized femoral stems are designed to have a perfect fit and fill in the femur in order to achieve physiological load transfer and minimize stress shielding. Dual-energy X-ray absorptiometry (DXA) is regarded as an accurate method for detection of small alterations in bone mineral density (BMD) around hip prostheses. We present medium-term DXA results from a randomized study comparing a customized and an anatomical femoral stem.

METHODS

100 hips were randomized to receive either the anatomical ABG-I stem or the Unique customized femoral stem, both uncemented. DXA measurements were conducted postoperatively and after 3, 6, 12, 24, 36, and 60 months, and BMD was computed for each of the 7 Gruen zones in the proximal femur.

RESULTS

Results from 87 patients were available for analysis. 78 completed the 5-year follow-up: 35 patients in the ABG group and 43 patients in the Unique group. In both groups, we found the greatest degree of bone loss in the proximal Gruen zones. In zone 1, there was 15% reduction in BMD in the ABG-I group and 14% reduction in the Unique group. In zone 7, the reduction was 28% in the ABG-I group and 27% in the Unique group. The only statistically significant difference between the groups was found in Gruen zone 4, which is distal to the tip of the stem, with 1.6% reduction in BMD in the ABG-I group and 9.7% reduction in the Unique group (p = 0.003).

INTERPRETATION

5-year DXA results showed that because of stress-shielding, proximal bone loss could not be avoided-either for the anatomical ABG-I stem or for the customized Unique stem.

A prospective randomized study comparing electrochemically deposited hydroxyapatite and plasma-sprayed hydroxyapatite on titanium stems

BACKGROUND AND PURPOSE

Plasma-sprayed hydroxyapatite (HA) is a successful coating for fixation of uncemented femoral stems. There may be alternative coatings with advantages in bone remodeling and transport of bone-active substances. We investigated whether an electrochemically deposited hydroxyapatite, Bonemaster (BM), might be a safe alternative in total hip arthroplasty. Our hypothesis was that the new coating would not be inferior to the conventional one.

PATIENTS AND METHODS

50 patients (55 hips) were included. The stem was tapered and porous-coated proximally. On top of the porous coating was either HA or BM. Patients were evaluated postoperatively and after 3, 6, 12, and 24 months to measure fixation by radiostereometric analysis (RSA), bone mineral density by dual-energy X-ray absorptiometry (DXA), and conventional radiography. Clinical evaluation was performed with Harris hip score and Oxford hip score, both preoperatively and after 2 years.

RESULTS

After 2 years, the stems had subsided 0.25 (HA) and 0.28 (BM) mm and there were no statistically significant differences between the groups in any direction, regarding both migration and rotation. The BM group retained significantly more bone than the HA group in Gruen zone 1 during the first 2 years. The Harris and Oxford hip scores were similar in both groups.

INTERPRETATION

Electrochemically deposited hydroxyapatite on an uncemented stem does not appear to be inferior to plasma-sprayed HA regarding clinical and radiological results, bone remodeling, and micromotion after 2 years follow-up.

Alendronate reduces periprosthetic bone loss after uncemented primary total hip arthroplasty - a 5-year follow-up of 16 patients

BACKGROUND AND AIMS

Periprosthetic bone loss, especially in the proximal part of the femur, is common after cemented and uncemented total hip arthroplasty (THA). Short-term studies suggest that bisphosponates can minimize this bone loss related to stress-shielding phenomenon. The aim of the present randomized study was to investigate whether the positive effect of a 6 months alendronate treatment postoperatively still exists at five-year follow up.

MATERIALS AND METHODS

Sixteen uncemented primary THA patients were randomized to receive either 10mg alendronate + 500 mg calcium (n = 7) or 500 mg calcium only (n = 9) daily for 6 months postoperatively. Periprosthetic bone mineral density (BMD) was measured with the dual X-ray absorptiometry (DXA) postoperatively and at 6, 12, 24, 36 and 60 months follow-up.

RESULTS

At the 5-year follow up, the calcium group showed mean BMD decreases of 23.1% (SD 14.6) in the proximal part of the femur (prROI) and 9.6% (SD 14.9) in total femoral regions of interest (totROI). In the alendronate group the corresponding BMD decreases were 13.6% (SD 19.0) and 3.9% (SD 7.6) respectively. The positive effect of alendronate was already demonstrated during the first six months postoperatively. Subsequently the bone loss was equal in both groups, and the 5-year BMD changes were not significantly different between the groups.

CONCLUSIONS

Alendronate seems to decrease early periprosthetic bone loss after arthroplasty but this pilot study could not provide enough evidence that the positive effect noted in the early postoperative period is still maintained 5 years after the operation.

Changes in bone mineral density of the distal femur after revision total knee arthroplasty with metaphyseal press-fit stem

Background

The effect of postoperative adaptive bone remodeling following a stemmed femoral implant in revision total knee arthroplasty (rTKA) is unknown. The aim of this study was to evaluate bone mineral density (BMD) changes of the distal femur following cemented rTKA with a 100-mm press-fit stem.

Materials and methods

Sixteen consecutive patients were included in the study (age range 40–85 years; mean 63.5 years). NexGen^® (Zimmer, Warsaw, IN, USA) cemented revision implants were used. All implants had the same press-fit femoral stem length of 100 mm. Clinical examinations with evaluation of the knee function using the Knee Society’s Knee Scoring System were used. Measurements of BMD (g/cm²) were performed by dual-energy X-ray absorptiometry (DEXA) using a Norland XR-46 (Norland Corp. Fort Atkinson, WI, USA) bone densitometer.

Results

Knee and function scores improved significantly (P = 0.005) from the preoperative values to 1 year of follow-up. In regions of interest (ROI) 1–4, a significant increase in BMD (3.5–6.0%) after 6 months was seen. This increase only remained significant in ROI 4 (4.0%, P = 0.01) at 1 year of follow-up.

Conclusions

The increase in BMD is probably the result of increased mobility and load on the extremity after implantation of a well-functioning rTKA.

Minimal stress shielding with a Mallory-Head titanium femoral stem with proximal porous coating in total hip arthroplasty

BACKGROUND

As longevity of cementless femoral components enters the third decade, concerns arise with long-term effects of fixation mode on femoral bone morphology. We examined the long-term consequences on femoral remodeling following total hip arthroplasty with a porous plasma-sprayed tapered titanium stem.

METHODS

Clinical data and radiographs were reviewed from a single center for 97 randomly selected cases implanted with the Mallory-Head Porous femoral component during primary total hip arthroplasty. Measurements were taken from preoperative and long-term follow-up radiographs averaging 14 years postoperative. Average changes in the proximal, middle and diaphyseal zones were determined.

RESULTS

On anteroposterior radiographs, the proximal cortical thickness was unchanged medially and the lateral zone increased 1.3%. Middle cortical thickness increased 4.3% medially and 1.2% laterally. Distal cortical thickness increased 9.6% medially and 1.9% laterally. Using the anteroposterior radiographs, canal fill at 100 mm did not correlate with bony changes at any level (Spearman's rank correlation coefficient of -0.18, 0.05, and 0.00; p value = 0.09, 0.67, 0.97). On lateral radiographs, the proximal cortical thickness increased 1.5% medially and 0.98% laterally. Middle cortical thickness increased 2.4% medially and 1.3% laterally. Distal cortical thickness increased 3.5% medially and 2.1% laterally. From lateral radiographs, canal fill at 100 mm correlated with bony hypertrophy at the proximal, mid-level, and distal femur (Spearman's rank correlation coefficient of 0.85, 0.33, and 0.28, respectively; p value = 0.001, 0.016, and 0.01, respectively).

CONCLUSION

Stress shielding is minimized with the Mallory-Head titanium tapered femoral stem with circumferential proximal plasma-sprayed coating in well-fixed and well-functioning total hip arthroplasty. Additionally, the majority of femora demonstrated increased cortical thickness in all zones around the stem prosthesis.

LEVEL OF EVIDENCE

Therapeutic Level III.

Late remodeling around a proximally HA-coated tapered titanium femoral component

Most bone remodeling is thought to occur within the first few years after THA. Loss of bone density later may be associated with stress shielding or normal bone loss of aging. We evaluated remodeling changes over time with a proximally hydroxyapatite-coated tapered titanium stem. We evaluated plain radiographs of 143 hips for cancellous condensation, cortical hypertrophy, cortical porosis, cortical index, and canal fill at early postoperative, 5, 10, and 15 years. Average age was 51 years at THA; 69 patients (77 hips) (53%) were women; and 102 hips (71%) had primary osteoarthrosis. Based on radiographic findings at 15 years, hips were divided into three subgroups: 43 (30%) demonstrated minimal remodeling changes; 53 (37%) demonstrated cortical hypertrophy evident before 5 years; and 47 (33%) demonstrated additional late remodeling and cortical porosis, most often after 10 years. Hips with poorer bone (Dorr Types B or C) and, when including only hips with osteoarthrosis, more female hips had cortical porosis at 15 years. Late radiographic changes in patients with porosis appear more similar to that associated with an extensively rather than proximally coated stem. Whether continued bone adaptation and bone loss of aging will eventually threaten implant stability is unknown, but at 15 years, all 143 implants remained well fixed and clinically asymptomatic.

LEVEL OF EVIDENCE

Level III, retrospective study. See the Guidelines for Authors for a complete description of levels of evidence.

Changes in the bone mineral density in the acetabulum and proximal femur after cementless total hip replacement

Our aim in this prospective study was to compare the bone mineral density (BMD) around cementless acetabular and femoral components which were identical in geometry and had the same alumina modular femoral head, but differed in regard to the material of the acetabular liners (alumina ceramic or polyethylene) in 50 patients (100 hips) who had undergone bilateral simultaneous primary total hip replacement. Dual energy X-ray absorptiometry scans of the pelvis and proximal femur were obtained at one week, at one year, and annually thereafter during the five-year period of the study.

At the final follow-up, the mean BMD had increased significantly in each group in acetabular zone I of DeLee and Charnley (20% (15% to 26%), p = 0.003), but had decreased in acetabular zone II (24% (18% to 36%) in the alumina group and 25% (17% to 31%) in the polyethylene group, p = 0.001). There was an increase in the mean BMD in zone III of 2% (0.8% to 3.2%) in the alumina group and 1% (0.6% to 2.2%) in the polyethylene group (p = 0.315). There was a decrease in the mean BMD in the calcar region (femoral zone 7) of 15% (8% to 24%) in the alumina group and 14% (6% to 23%) in the polyethylene group (p < 0.001). The mean bone loss in femoral zone 1 of Gruen et al was 2% (1.1% to 3.1%) in the alumina group and 3% (1.3% to 4.3%) in the polyethylene group (p = 0.03), and in femoral zone 6, the mean bone loss was 15% (9% to 27%) in the alumina group and 14% (11% to 29%) in the polyethylene group compared with baseline values. There was an increase in the mean BMD on the final scans in femoral zones 2 (p = 0.04), 3 (p = 0.04), 4 (p = 0.12) and 5 (p = 0.049) in both groups.

There was thus no significant difference in the bone remodelling of the acetabulum and femur five years after total hip replacement in those two groups where the only difference was in the acetabular liner.

Changes of bone mineral density after cementless total hip arthroplasty with two different stems

Cementless total hip arthroplasty has achieved reliable long-term results since porous coatings were developed, but postoperative changes around the stem remain poorly documented. In this study, changes of the bone mineral density (BMD) were compared between two types of cementless stem. In group B (28 patients with 31 hips), a straight tapered stem with porous plasma spray coating on the proximal 1/4 was used, while group S (24 patients with 26 hips) was given a fluted, tri-slot stem with porous hydroxyapatite coating on the proximal 1/3. In group B, there was an early decrease of BMD, which recovered after 12 months, indicating that stress shielding was minimal. In group S, however, BMD continued to decrease without recovery. The stem shape and radiological findings suggested that the cause of stress shielding in group S was distal fixation.

Alendronate inhibits periprosthetic bone loss around uncemented femoral components

Periprosthetic bone loss can be severe around the femoral component after uncemented arthroplasty. This study investigated the inhibitory effect of alendronate on periprosthetic bone loss. Seventeen patients underwent arthroplasty with an uncemented femoral component. Among them, 8 patients were given alendronate 5 mg once daily for 1 year (ALN group) and 9 patients received no pharmacotherapy (control group). Bone mineral density was measured in six periprosthetic zones by dual-energy X-ray absorptiometry at 1, 6, and 12 months after surgery. The average periprosthetic bone mineral density was 0.674-0.920 g/cm(2) at 1 month after surgery. From 6 months onward, the absolute bone mineral density and the ratio relative to the 1-month value were significantly decreased in the proximal zones of the femur in the control group (the ratio decreased from 0.817 to 0.769; P = 0.0040-0.0353). In the ALN group, however, the absolute and relative bone mineral density of the proximal femur remained unchanged for 12 months. In the other femoral zones, the absolute and relative bone mineral density remained unchanged throughout the study in both groups. We concluded that alendronate significantly inhibited the decrease of periprosthetic bone mineral density in the proximal femur after uncemented arthroplasty.

New femoral designs: do they influence stress shielding?

Virtually all contemporary cementless femoral hip stems are designed with the goals of achieving immediate and long-term stability, restoring hip mechanics, and minimizing thigh pain. However, the incorporation of features specifically intended to minimize stress-mediated bone resorption (stress shielding) has been variable. Attempts to reduce bone loss through stem design have yielded inconsistent results and, in certain instances, early and catastrophic failure. Prior beliefs regarding the determinants of stress shielding were based upon the qualitative assessment of bone loss using plain radiographs. These are being challenged, particularly with regard to the role of porous coating level. This is in large part due to the refinement and widespread availability of dual-energy xray absorptiometry (DEXA), which allows quantitative assessment of bone mineral density both pre- and postoperatively. The available evidence indicates stem stiffness plays a dominant role. Progressive bone loss through stress shielding has potentially dire consequences. While such problems have not manifested as severe or widespread clinical issues, the preservation of femoral bone stock is an important and desirable goal.

Preoperative bone quality as a factor in dual-energy X-ray absorptiometry analysis comparing bone remodelling between two implant types

Recently it was shown that the design changes from the ABG-I to ABG-II hip stem resulted in a better, although not significant, proximal bone preservation. Our hypothesis was that by matching patients for preoperative bone quality, statistical power would increase and that the trend of better proximal bone preservation in ABG-II might become significant. Twenty-four ABG-II patients were compared to two different ABG-I groups: (1) 25 patients from our earlier prospective study and (2) a group of 24 patients selected to perfectly match the ABG-II group regarding gender, age and preoperative bone quality. Postoperative changes in periprosthetic bone mineral density (BMD) were quantified at 2 years postoperatively using DEXA scanning. Bone preservation (less BMD loss) was better for the ABG-II than the ABG-I (all two groups) in the proximal zones 1 and 7. In Gruen zone 7, a statistically significant difference was found for group B (p = 0.03). By matching patients for preoperative bone quality and gender, a statistical significant difference was found in proximal bone preservation in favour of ABG-II. In future comparative bone remodelling studies using DEXA, patients should be matched for preoperative bone quality and gender.

Migration pattern of a short femoral neck preserving stem

The CFP stem represents a short collared neck-retaining stem with very proximal metaphyseal anchoring along the calcar combined with up-to-date metallurgy. Despite theoretical advantages, the stability and clinical outcome are unknown. We prospectively measured the migration pattern of this new stem and cup. Twenty-six patients (26 hips) with a mean age of 54 years (range, 40-66 years) underwent THA and were followed for 2 years with radiostereometry, radiographs, and clinical scores. The stem showed some early retroversion (mean, SEM 0.6 degrees, 0.3), but stabilized before 1 year. Subsidence (0.05 mm, 0.06) and varus-valgus tilting (0.03 degrees, 0.01) were low. We observed no bone loss in the calcar region. Factors related to patients, implant design, and implantation did not predict migration patterns. The two-dimensional wear of the ceramic/conventional articulation was 0.09 mm at 2-24 months. The low migration of this short neck preserving stem suggests a favorable long-term outcome but longer followup is needed to substantiate this prediction. This design might become an alternative to standard stems and hip resurfacing.

LEVEL OF EVIDENCE

Therapeutic Level IV. See The Guidelines for Authors for a complete description of levels of evidence.

Periprosthetic proximal bone loss after uncemented hip arthroplasty is related to stem size: DXA measurements in 138 patients followed for 2-7 years

BACKGROUND

Periprosthetic bone loss occurs around uncemented femoral stems and may be influenced by the stem size.

PATIENTS AND METHODS

We studied 138 consecutive patients, 3 (2-7) years on average after a total hip arthroplasty operation (THA) for unilateral osteoarthritis with the Bi-Metric uncemented femoral stem. We analyzed Harris hip score and bone mineral density.

RESULTS

The mean Harris hip score was 97 at follow-up. Bone mineral density decreased proximally by 19% in both Gruen zones 1 and 7. Bone loss in zones 1, 2, 6, and 7 was significantly associated with stem size. Distally, a small gain in bone mass was found in zones 3 and 5 for medium femoral sizes.

INTERPRETATION

We found a marked proximal BMD loss, especially for the larger stems, which may be specific for this particular implant. Long-term studies should reveal whether this proximal bone loss will affect the longevity of the THA.

Peri-prosthetic bone density after implantation of a custom-made femoral component. A five-year follow-up

Peri-prosthetic bone loss caused by stress shielding may be associated with aseptic loosening of femoral components. In order to increase primary stability and to reduce stress shielding, a three-dimensional, cementless individual femoral (Evolution K) component was manufactured using pre-operative CT scans. Using dual energy x-ray absorptiometry, peri-prosthetic bone density was measured in 43 patients, three months, six months, 3.6 and 4.6 years after surgery. At final follow-up there was a significant reduction in mean bone density in the proximal Gruen zones of -30.3% (zone 7) and -22.8% (zone 1). The density in the other zones declined by a mean of between -4% and -16%. We conclude that the manufacture of a three-dimensional, custom-made femoral component could not prevent a reduction in peri-prosthetic bone density.

Bone loss after total hip arthroplasty

The aim of the present study is to evaluate periprosthetic bone loss and to compare it with the bone loss in other areas of the body. We also aim to shed light on the course of bone mineral density (BMD) in patients with cemented femoral prosthesis in comparison with those with uncemented ones. We analyzed the BMD using dual-energy X-ray absorptiometry (DEXA) in a consecutively recruited convenience sample of 50 patients with cemented and uncemented total hip arthroplasty (THA). BMD was measured within the first month after surgery as well as 1 year later. In ten of the patients (20%) previously undiagnosed osteoporosis was revealed. Osteoporosis was significantly more frequently detected in patients with cemented compared to those with uncemented femoral stem. We found a significant loss in BMD in the periprosthetic femoral region compared with no losses in other body regions (lumbar spine, radius, contralateral hip). The magnitude of this loss was the highest in Gruen-Zone 7 (mean 15.2% per year). We found no BMD loss difference between patients with cemented and uncemented prosthesis in the Gruen-Zone 2-7. In conclusion these periprosthetic losses may be due to local factors such as periprosthetic bone remodeling, as they contrast with the course of BMD in the lumbar spine, radius and not operated hip.

Bone remodelling after total hip arthroplasty using an uncemented anatomic femoral stem: a three-year prospective study using bone densitometry

PURPOSE

To evaluate the clinical, radiological, and densitometric changes in the bone-remodelling patterns of femoral stems aligned in neutral, valgus, or varus positions.

METHODS

Between February and October 2000, 70 patients underwent unilateral total hip arthroplasty for primary osteoarthritis using an uncemented Anatomique Benoist Girard (ABG) II stem. 69 patients (30 males and 39 females) with a mean age of 59 years (range, 38-76 years) and a mean body weight of 79.3 kg (range, 29-110 kg) completed 3 years' follow-up on bone remodelling. The clinical, radiological, and densitometric changes of the neutral, valgus, and varus groups were evaluated, and the difference in bone-remodelling patterns between the 3 groups was analysed.

RESULTS

54 patients had neutrally placed stems, while varus and valgus malalignment occurred in 6 and 9 patients, respectively. Clinical and radiological evaluations were very similar among the 3 groups. Only densitometry could detect traceable changes resulting from the differing biomechanics of the neutral, varus, and valgus stem alignments.

CONCLUSION

The ABG II stem design made moderate errors in alignment biomechanically tolerable. Alignment defects had no clinical consequences and resulted in minimal differences in bone remodelling.

[Periprosthetic bone loss after total hip endoprosthesis. Dependence on the type of prosthesis and preoperative bone configuration]

The changes of the periprosthetic bone density were examined with DEXA in 81 patients over a period of 1 year after implantation of cementless total hip endoprosthesis. Four types of endoprostheses (Vision 2000/Duraloc, ALPHA-Fit/ALPHA-Lock Plus, CLS/Allofit, Mayo/Trilogy) were implanted. Information on the changes of the periprosthetic bone density depending on the type of the prosthesis and the bony situation at the femur before operation was expected from these measurements. In all types of stems the strongest reduction of the bone density was found in the region of the calcar femoris, and the smallest changes were found distally and medially of the tip of the prostheses. In the prosthesis with shorter stem the change of the bone density was altogether clearly lower than in prostheses with longer stem. With increasing size of the prosthesis with proximally porous coating made from cobalt-chrome alloy, proximal atrophy was observed more frequently, whilst in the prosthesis made from titanium alloy with completely rough-blasted surface the distal hypertrophy increased. A low preoperative corticalis-bone marrow index strengthened the proximal atrophy in proximally porously coated prosthesis made from cobalt-chrome alloy and led in the prosthesis with completely rough-blasted surface more often to distal hypertrophy of the bone.

Differences in stability and bone remodeling between a customized uncemented hydroxyapatite coated and a standard cemented femoral stem A randomized study with use of radiostereometry and bone densitometry

The custom made Unique stem is designed to fit closely to the metaphyseal region of the femur in order to obtain maximum mechanical stability and optimal load transfer. Thirty-seven patients (38 hips) with non-inflammatory arthritis were randomized to the uncemented custom made Unique stem or the Elite Plus stem inserted with cement. The patients have been followed clinically as well as with radiostereometry (RSA) and Dual-energy X-ray Absorptiometry (DXA) for 2 years. After 2 years the RSA result showed minimal translation and rotation for the Unique stem while the Elite Plus rotated slightly (mean 1.05 degrees) into retroversion. Compared to previous studies the Elite Plus was as stable as the Charnley prosthesis. The DXA results showed a significantly higher proximal and total (10% for the Unique versus 5% for Elite) bone loss for the Unique stem compared to the Elite Plus. Thus the optimal proximal press-fit of the custom made stem did secure a stable fixation, but did not decrease the proximal bone loss.

Preservation of bone mineral density of the proximal femur following hemisurface arthroplasty

Bone mineral density of the proximal femur was measured in six patients who underwent hemisurface replacement for osteonecrosis of the femoral head. Bone mineral density values in operated and contralateral nonoperated hips were compared. In four patients who had sequential examinations, bone mineral density was compared over time. Average patient age was 34.6 years, average follow-up was 9.1 years, and mean follow-up of bone mineral density measurements was 6.6 years. Average bone mineral density variation was 0.0048 to -0.0264 g/cm2 per year in all five regions in nonoperated hips and -0.012 to -0.0300 g/cm2 in operated hips. These results support bone conservation and preservation with hemiresurfacing arthroplasty in young patients with osteonecrosis of the femoral head.

Preservation of femoral bone mass after total hip replacements with a lateral flare stem

Uncemented, porous-coated femoral stems rely on bone in-growth to achieve stable, long-lasting fixation. The loss of proximal femoral bone mass around hip stems has been traditionally termed "stress shielding" and has been linked to the transfer of loads to the diaphysis and the relative unloading of the proximal femur. A total of 10 total hip arthroplasties with a proximally coated lateral flare device designed to engage both cortices at the metaphyseal level were evaluated with dual-energy X-ray (DEXA) absorptiometry and qualitative radiographic changes 3 weeks after surgery and at 12, 24 and 52 weeks thereafter. All hips were radiologically stable. The DEXA measurements revealed an overall increase in the bone mineral density (BMD) at 52 weeks of 3%. Greater gains were observed at or below the lateral flare of the stem in the metaphyseal femur.

The long-term clinical relevance of calcar atrophy caused by stress shielding in total hip arthroplasty: a 10-year, prospective, randomized study

Eighty osteoarthritic female patients were randomly allocated to 4 equal groups; the Zwey-Muller, the Corail, the Optifix, or Autophor 900S cementless total hip arthroplasties (THAs) were implanted; and bone density changes, at different sites, were prospectively studied. In zone 7, the greatest reduction of bone density values was observed at 2 years (group A: 24%, group B: 8%, group C: 14.8%, and group D: 18.5%). In all groups, a similar pattern of slow but progressive recovery of bone mineral density changes after the third year was observed, approaching baseline values at 10 years, during which all patients showed satisfactory clinical results. We suggest that the clinical and theoretical relevance of the stress-shielding phenomenon in THA has been overestimated in the literature.

Proximal ingrowth components

The advantage of using a proximal ingrowth hip revision component is restoring physiologic load to the revision femur. Although first generation components had limited survivorship and diminished clinical outcomes, subsequent designs have proven much better with rates of aseptic loosening of 2% to 5%, and good clinical scores. Titanium is the favored substrate metal for these components because of its bone affinity and low modulus of elasticity. A series of 107 consecutive revisions of standard stems is presented using a calcar replacement long stem design with an overall 92.7% 11-year survivorship. Bone ingrowth was achieved in all but two components. Radiographic stress shielding was seen in 11.4% with 42.6% having some calcar healing. These implants can be used in most revision situations, but require sufficient proximal metaphysis of the femur to provide support of the component. Supplemental allograft may need to be used. These implants require a tight fit in the isthmus of the femur and fill of the proximal femur. Modularity makes achieving this easier, but monoblock designs also can be successful.

Cyclic therapy with etidronate has a therapeutic effect against local osteoporosis after cementless total hip arthroplasty

Proximal bone resorption around the femoral stem is one of the major complications of cementless total hip arthroplasty (THA). The potential complications resulting from proximal bone resorption include femoral fracture and late stem loosening. The purpose of this study was to evaluate the effects of cyclic therapy with etidronate on periprosthetic bone mineral density (BMD) after cementless THA. Fifty-two patients who had undergone cementless THA were randomized for this study. Group A consisted of 30 hips in 29 patients without osteoactive drugs. Group B consisted of 23 hips in 23 patients with cyclic therapy with etidronate (i.e., 400 mg/day of oral etidronate for 2 weeks followed by 12 weeks of 500 mg/day of calcium lactate and repeated every 14 weeks), one of whom was excluded from the study because of side effects attributed to the drug. Periprosthetic BMD in seven regions of interest based on the zones of Gruen et al. (Clin. Orthop. 141 (1979), 17-27) was measured with dual energy X-ray absorptiometry (DXA) at 3 weeks, 6 months, and 12 months postoperatively. The postoperative decreases of BMD in group B were significantly lower than those in group A in zones 1 and 7 (P < 0.05 and P < 0.05, respectively) at 6 months and in zones 1, 2, 6, and 7 (P < 0.05, P < 0.05, P < 0.05, and P < 0.001, respectively) at 12 months. The BMD change appeared to be stabilized at 6 months in all zones in group B, while in group A there was a progressive decrease of average BMD (6.1%) in zone 7 between 6 months and 12 months. These findings suggested that cyclic therapy with etidronate may help to reduce the resorptive changes in the proximal part of the femur after cementless THA. Further follow-up study with larger populations will be required to define the potential efficacy of intermittent cyclic etidronate therapy on postoperative bone loss.

The influence of design parameters on cortical strain distribution of a cementless titanium femoral stem

The strain distribution imposed on a femur following a total joint replacement is an important factor, in proximal bone loss due to stress shielding, and long term clinical success. This study investigated how five different design parameters of a cementless titanium femoral prosthesis influenced cortical strains. Test loads were applied and strains were measured with and without an abductor force simulation, using six human cadaveric femora. The cementless design used demonstrated significant calcar loading proximally and a similar strain distribution to the intact femur distally. Implant gross geometry was the major factor in determining the cortical strain distributions under abductor simulation in both axial and torsional loading.

Alendronate reduces periprosthetic bone loss after uncemented primary total hip arthroplasty: a prospective randomized study

Periprosthetic bone loss, especially in the proximal part of the femur, is common after cemented and uncemented total hip arthroplasty (THA). Bone loss can be progressive and, in the extreme, may threaten survival of the prosthesis. To study whether alendronate therapy can reduce bone loss adjacent to prostheses, 13 uncemented primary THA patients were randomized to the study. They received 10 mg alendronate + 500 mg calcium (n = 8) or 500 mg calcium only (n = 5) daily for 6 months follow-up after THA. Periprosthetic bone mineral density (BMD) was measured with dual energy X-ray absorptiometry (DXA). Decreases in periprosthetic BMD in the alendronate-treated group were lower compared with the changes in the calcium-only group in the same regions of interest at the same follow-up time. In the proximal femur, the mean BMD decrease was 17.1% in the calcium-only group, whereas in the alendronate-treated group the decrease was only 0.9% (p = 0.019). The mean periprosthetic BMD change was also significantly different in the total periprosthetic area between the study groups at the end of the follow-up (calcium-only group -9.9% vs. alendronate-treated group -2.6%; p = 0.019). Alendronate therapy led to a significant reduction in periprosthetic bone loss after primary uncemented THA compared with the changes found in patients without therapy. This kind of bone response may improve the support of the prosthesis and may result in better survival of the prosthesis. However, in this study the follow-up time was too short and the study population was too small to make any long-term conclusions as to the prognosis for THA patients treated with alendronate.

Monitoring of periprosthetic BMD after uncemented total hip arthroplasty with dual-energy X-ray absorptiometry--a 3-year follow-up study

Insertion of a metallic implant into the femur changes bone loading conditions and results in remodeling of femoral bone. To quantify changes in bone mass after uncemented total hip arthroplasty (THA), we monitored femoral bone with dual-energy X-ray absorptiometry (DXA). The periprosthetic bone mineral density (BMD) was measured with Lunar DPX densitometry in seven Gruen zones and the total periprosthetic area at scheduled time intervals in 22 patients during a 3-year follow-up. BMD decreased significantly almost in all Gruen zones during the first 3 months, ranging from 3.4% to 14.4% (p < 0.05 top < 0.001). At the end of the first year, the most remarkable decrease in BMD was found in the calcar (zone 7; -22.9%). During the second postoperative year, a slight restoration of periprosthetic bone mass was recorded. During the third year, no significant changes in BMD were found. The preoperative BMD was the only factor that was significantly related to the periprosthetic bone loss. Clearly, the early periprosthetic bone loss noticed during the 3 months after THA is caused by mainly limited weight bearing to the operated hip and stress shielding. We suggest that the restoration of bone mass is a sign of successful osteointegration between bone and metallic implant. DXA is a suitable tool to follow the bone response to prosthetization and will increase our knowledge on the behavior of bone after THA.

Bone density adjacent to press-fit acetabular components. A prospective analysis with quantitative computed tomography

BACKGROUND

The status of periprosthetic bone stock is an important concern when revision total hip arthroplasty is undertaken. Remodeling of periprosthetic femoral bone after total hip arthroplasty has been studied extensively, and the phenomenon of femoral stress-shielding has been well characterized. Finite element analysis and computer-simulated remodeling theory have predicted that retroacetabular bone-mineral density decreases after total hip arthroplasty; however, remodeling of periprosthetic pelvic bone in this setting has yet to be well defined. This study was conducted to evaluate the short-term natural history of periacetabular bone-mineral density following primary total hip arthroplasty.

METHODS

Periacetabular bone-mineral density was studied prospectively in a group of twenty-six patients who underwent primary hybrid total hip arthroplasty for the treatment of advanced osteoarthritis. Density within the central part of the ilium (directly cephalad to a press-fit acetabular component) was assessed with serial quantitative computed tomography. Baseline density was measured within the first five days following the total hip arthroplasty. Ipsilateral density measurements were repeated at an average of 1.28 years postoperatively. Density values at corresponding levels of the contralateral ilium were obtained at both time-points in all patients to serve as internal controls.

RESULTS

Bone-mineral density decreased significantly (p< or =0.001) between the two time-points on the side of the operation. The mean absolute magnitude of the interval density reduction (75 mg/cc) was greatest immediately adjacent to the implant (p<0.001), but it was also significantly reduced (by 35 mg/cc) at a distance of 10 mm cephalad to the implant (p = 0.001). Relative declines in mean density ranged from 33% to 20% of the baseline values. No focal bone resorption (osteolysis) was detected at the time of this short-term follow-up study. With the numbers available, no significant interval alteration in bone-mineral density was found on the untreated (internal control) side (p> or =0.07).

CONCLUSIONS

We suggest that the observed decline in bone-mineral density represents a remodeling response to an altered stress pattern within the pelvis that was induced by the presence of the acetabular implant. This finding corroborates the predictions of finite element analysis and computer-simulated remodeling theory. It remains to be seen whether this trend of atrophy of retroacetabular bone stock will continue with longer follow-up or will ultimately affect the long-term stability of press-fit acetabular components.

Bone loss around failed femoral implant measured by dual-energy X-ray absorptiometry

Periprosthetic bone mineral density (BMD) and its changes after primary total hip arthroplasty (THA) have been studied extensively, but quantitative data on BMD around loosened prostheses are still lacking. In this study, using dual-energy X-ray absorptiometry (DXA), we determined periprosthetic BMD in 19 patients with failed primary THA. There was a decrease in BMD (8. 8%-25.5%) in every Gruen zone as compared with the patient's non-operated (control) side. Although the bone loss was most significant in the proximal femur, as in primary THA, the pattern of bone loss around the failed THA differred from the typical remodeling seen after successful THA. We suggest that quantitation of bone mass around the failed femoral stem is possible. Remarkable generalized bone loss around the stem is associated with a loosened prosthesis.

Effect of distraction rate on biomechanical, mineralization, and histologic properties of an ovine mandible model

Craniofacial microsomia is a common congenital malformation. Ilizarov's method of distraction osteogenesis applied to the mandible has yielded promising results both experimentally and clinically. Because the technique is used predominantly in a pediatric population, length of treatment and compliance may be problematic. To date, the limits of distraction rate in the craniofacial skeleton have not been defined. This study was designed to investigate the effects of distraction rate, in a large animal model, on the mineralization, biomechanical, and histologic properties of lengthened mandibles. Clinically faster distraction rates would decrease the overall treatment time. Twenty-four animals were divided into four groups, with varying rates of distraction (1, 2, 3, and 4 mm/day). A uniaxial distractor at the angle of the mandible was used. The mandibles were lengthened to 24 mm and fixed for a period of 5 weeks, when the animals were killed. The specimens were analyzed with respect to mineralization using dual energy x-ray absorptiometry, biomechanical strength, through a modified three-point bending test, and histologic properties with hematoxylin and eosin stains. Biomechanical, mineralization, and histologic analyses of the samples indicated that group 1 (1 mm/day) samples were significantly superior (p<0.05) to those of group 4 (4 mm/day). Although bone formation was achieved in all groups, group 1 (1 mm/day) demonstrated the strongest biomechanical and histologic properties. Bone mineral density obtained using dual energy x-ray absorptiometry may be clinically useful as a reliable, noninvasive, and relatively cheap predictor for removal time of the fixator.

Temporal changes of periprosthetic bone density in patients with a modular noncemented femoral prosthesis

Bone mineral density changes surrounding a porous-coated proximal modular sleeved hip prosthesis were determined as a function of time over a 24-month period. The periprosthetic bone regions were defined by the 7 Gruen zones. Measurements were obtained with a dual-energy x-ray densitometer using a dedicated software program. Inclusion criteria required that the patients had primary implants, were asymptomatic with Harris hip scores of > or =95 for the duration of the study, and showed no radiographic evidence of loosening. The protocol specified that bone measurements be obtained within 1 week after surgery as a baseline reference and at 3, 6, 9, 12, 18, and 24 months thereafter. A total of 111 consecutive patients were enrolled in this ongoing prospective study, of whom 52 had 4 or more measurements after the initial baseline determination for statistical analysis. At 3 months, all zones showed a significant decrease in bone mineral density relative to the baseline measurements, and their mean loss ranged from 6.5% to 11.2%. By 24 months, mineral losses relative to baseline varied from 0 to 11% for Gruen zones 1 to 6. Relative to the 3-month levels, there was no significant change in zones 1, 4, and 6; a significant improvement in zones 3 and 5; and a small but significant loss in zone 2 at 24 months. Gruen zone 7, the medial femoral neck cortex, differed in that it was the site of greatest bone mineral loss, attaining a mean of 20.2% at 24 months. It was found that the amount of periprosthetic mineral loss at 12 months was independent of the initial baseline reference bone mineral levels. Results of this study show the normal temporal bone mineral changes surrounding a proximally modular porouscoated femoral implant. The pattern of change demonstrated may be peculiar to the prosthesis used in this study because it might differ in implants of different design and material composition.