The effect of adsorbing naphthalene sulfonate formaldehyde condensates upon the interactions between metal oxides

A Review on Concrete Superplasticizers and Their Potential Applications for Enhancing the Performance of Thermally Activated Recycled Cement

With the rapid development of the construction industry worldwide, a large amount of waste concrete is generated each year, which has caused serious environmental problems. As a green and sustainable building material, thermally activated recycled cement (RC) has received widespread attention. However, the unique properties of RC, such as the high water demand and short setting time, necessitate the use of specialized superplasticizers that are different from those used in ordinary Portland cement. As an important component for the application of RC, superplasticizer has an important impact on the performance modification of RC. This article summarizes the recent research progress of potential superplasticizers for RC, with a view to providing a reference for the research and application of superplasticizers for RC. Based on the differences between ordinary Portland cement and RC, the paper discusses potential superplasticizers that may be suitable for RC, and points out that future development of potential modified superplasticizers can include altering the molecular structure to improve adsorption onto the surfaces of RC or to enhance the durability of concrete with RC.

Synthesis, Separation and Adsorption of Naphthalene Sulphonate Formaldehyde Condensates

Ten components of NaNSF were separated by thin layer chromatography (TLC) by using F254 silica gel plates as fixed phase and acidic alcohol solution as mobile phase. Adsorption of naphthalene sulphonate formaldehyde (NaNSF) on titania surface was studied through fundamental principles of surface physical chemistry, and the saturation adsorption of NaNSF was found to be much lower than that of dispersant in disperse dyes. This study is of reference significance to the investigation of mechanism of adsorption of dispersant on dyes, cement, and so on.

Combustion Properties of Several Species of WoodCombustion Properties of Several Species of Wood

Mesoporous niobium oxide (Nb2O5) was synthesized and treated with naphthalene sulfonated formaldehyde resin (NSF) solution. These new inorganic-organic hybrid composites were characterized by different techniques. Results indicated that the pores of the nanostructured material are filled with the NSF resin with changes in the morphology and thermal properties of the mesoporous Nb2O5

Depolymerisation and biodegradation of a synthetic tanning agent by activated sludges, the bacteria Arthrobacter globiformis and Comamonas testosteroni, and the fungus Cunninghamella polymorpha

Degradation of a synthetic tanning agent CNSF (a condensation product of 2-naphthalenesulfonic acid (2-NSA) and formaldehyde) by four activated sludges, two previously characterised bacterial strains, Arthrobacter sp. 2AC and Comamonas sp. 4BC, and the fungus Cunninghamella polymorpha, was studied in batch culture at 25 degrees C by determining the changes in the concentrations of CNSF and its component monomers and oligomers (n2-n11). The loss of individual oligomers was correlated with the length of the NSA-CH2 chain. Approximately 25% of the total CNSF was degraded (i.e. mineralised) by the microbes contained in the four activated sludges and by the two bacterial isolates but with different lag phases and at different overall rates. The decline in CNSF concentration was due almost entirely to the biodegradation of the monomers (34.3% of CNSF) and, in particular, 2-NSA (27% of CNSF). There was no change in the n2-n11 components. The growth of C. polymorpha, on the other hand, arose from extracellular depolymerisation of CNSF oligomers and the biodegradation of the lower molecular mass products. Between 38% and 42% of total CNSF was degraded by C. polymorpha at 25 degrees C. The order of oligomer degradation was inversely related to degree of polymerisation. Eighty percent and 90% of the n4 and n5 and 100% oligomers n6-n11 were degraded after 120 h. At a higher temperature (37 degrees C) oligomers n4-n11 were degraded completely after 120 h. A combination of biodegradation (75%) and sorption to fungal biomass (25%) accounted for the measured loss of all oligomers from the solution phase. The CNSF degradation rates and the volume of fungal biomass produced (and therefore the extent of biosorption) were dependent on the presence of a second carbon source (both optimum at glucose 5 g/l). This is the first report that identifies and distinguishes between depolymerisation, sorption and biodegradation processes in the removal of CNSF and its component oligomers. The use of combinations of the depolymerising fungus C. polymorpha, and the monomer-degrading bacteria, Arthrobacter sp. 2AC and Comamonas sp. 4BC, have potential for wastewater treatment.