Design, construction, and analysis of a novel class of self-folding RNA

Duplex Stem Replacement with bPNA+ Triplex Hybrid Stems Enables Reporting on Tertiary Interactions of Internal RNA Domains

We report herein the synthesis and DNA/RNA binding properties of bPNA+, a new variant of bifacial peptide nucleic acid (bPNA) that binds oligo T/U nucleic acids to form triplex hybrids. By virtue of a new bivalent side chain on bPNA+, similar DNA affinity and hybrid thermostability can be obtained with half the molecular footprint of previously reported bPNA. Lysine derivatives bearing two melamine bases (K2M) can be prepared on multigram scale by double reductive alkylation with melamine acetaldehyde, resulting in a tertiary amine side chain that affords both peptide solubility and selective base-triple formation with 4 T/U bases; the Fmoc-K2M derivative can be used directly in solid phase peptide synthesis, rendering bPNA+ conveniently accessible. A compact bPNA+binding site of two U6 domains can be genetically encoded to replace existing 6 bp stem elements at virtually any location within an RNA transcript. We thus replaced internal 6 bp RNA stems that supported loop regions with 6 base-triple hybrid stems using fluorophore-labeled bPNA+. As the loop regions engaged in RNA tertiary interactions, the labeled hybrid stems provided a fluorescent readout; bPNA+ enabled this readout without covalent chemical modification or introduction of new structural elements. This strategy was demonstrated to be effective for reporting on widely observed RNA tertiary interactions such as intermolecular RNA-RNA kissing loop dimerization, RNA-protein binding, and intramolecular RNA tetraloop-tetraloop receptor binding, illustrating the potential general utility of this method. The modest 6 bp stem binding footprint of bPNA+ makes the hybrid stem replacement method practical for noncovalent installation of synthetic probes of RNA interactions. We anticipate that bPNA+ structural probes will be useful for the study of tertiary interactions in long noncoding RNAs.

Mutational analysis of structural elements in a class-I cyclic di-GMP riboswitch to elucidate its regulatory mechanism

The Vc2 riboswitch possesses an aptamer domain belonging to the class-I c-di-GMP riboswitch family. This domain has been analysed and the molecular mechanism by which it recognizes the c-di-GMP ligand has been elucidated. On the other hand, the regulatory mechanism of the full-length Vc2 riboswitch to control its downstream open reading frame (ORF) remains largely unknown. In this study, we performed in vivo reporter assays and in vitro biochemical analyses of the full-length riboswitch and its aptamer domain. We evaluated the results of in vivo and in vitro analyses to elucidate the regulatory mechanism of the Vc2 riboswitch. The present results suggest that recognition of c-di-GMP ligand by the Vc2 riboswitch aptamer domain downregulates expression of its downstream ORF primarily at the translational level.

Artificial ligase ribozymes isolated by a "design and selection" strategy

We developed a new in vitro selection strategy "design and selection" to isolate effectively artificial ribozymes (catalytic RNAs). An overall RNA structure (scaffold) is initially designed, and then a relatively short randomized sequence is installed at the reaction point of the scaffold, followed by the in vitro selection. This method can reduce the length of randomized sequence, providing large coverage of the sequence space in contrast with the conventional way, which makes the selection experiment effectively. Additionally, further analysis of ribozymes obtained by this approach is practically easy since the overall molecular structure is predesigned and well known. Here we show the procedure to isolate artificial RNA ligase ribozymes by this strategy. We have succeeded in isolation of the designed and selected ligase (DSL) ribozymes.

An RNA folding motif: GNRA tetraloop-receptor interactions

Nearly two decades after Westhof and Michel first proposed that RNA tetraloops may interact with distal helices, tetraloop–receptor interactions have been recognized as ubiquitous elements of RNA tertiary structure. The unique architecture of GNRA tetraloops (N=any nucleotide, R=purine) enables interaction with a variety of receptors, e.g., helical minor grooves and asymmetric internal loops. The most common example of the latter is the GAAA tetraloop–11 nt tetraloop receptor motif. Biophysical characterization of this motif provided evidence for the modularity of RNA structure, with applications spanning improved crystallization methods to RNA tectonics. In this review, we identify and compare types of GNRA tetraloop–receptor interactions. Then we explore the abundance of structural, kinetic, and thermodynamic information on the frequently occurring and most widely studied GAAA tetraloop–11 nt receptor motif. Studies of this interaction have revealed powerful paradigms for structural assembly of RNA, as well as providing new insights into the roles of cations, transition states and protein chaperones in RNA folding pathways. However, further research will clearly be necessary to characterize other tetraloop–receptor and long-range tertiary binding interactions in detail – an important milestone in the quantitative prediction of free energy landscapes for RNA folding.

RNA plasticity and selectivity applicable to therapeutics and novel biosensor development

Aptamers are short, single-stranded nucleic acid sequences that are selected in vitro from large oligonucleotide libraries based on their high affinity to a target molecule. Hence, aptamers can be thought of as a nucleic acid analog to antibodies. However, several viewpoints hold that the potential of aptamers arises from interesting characteristics that are distinct from, or in some cases, superior to those of antibodies. This review summarizes the recent achievements in aptamer programs developed in our laboratory against basic and therapeutic protein targets. Through these studies, we became aware of the remarkable conformational plasticity and selectivity of RNA, on which the published report has not shed much light even though this is evidently a crucial feature for the strong specificity and affinity of RNA aptamers.

Generation and development of RNA ligase ribozymes with modular architecture through "design and selection"

In vitro selection with long random RNA libraries has been used as a powerful method to generate novel functional RNAs, although it often requires laborious structural analysis of isolated RNA molecules. Rational RNA design is an attractive alternative to avoid this laborious step, but rational design of catalytic modules is still a challenging task. A hybrid strategy of in vitro selection and rational design has been proposed. With this strategy termed “design and selection,” new ribozymes can be generated through installation of catalytic modules onto RNA scaffolds with defined 3D structures. This approach, the concept of which was inspired by the modular architecture of naturally occurring ribozymes, allows prediction of the overall architectures of the resulting ribozymes, and the structural modularity of the resulting ribozymes allows modification of their structures and functions. In this review, we summarize the design, generation, properties, and engineering of four classes of ligase ribozyme generated by design and selection.

Evolutionary optimization of a modular ligase ribozyme: a small catalytic unit and a hairpin motif masking an element that could form an inactive structure

The YFL ribozyme is an artificial ligase ribozyme isolated by a ‘design and selection’ strategy, in which a modular catalytic unit was generated on a rationally designed modular scaffold RNA. This ligase ribozyme has a versatile catalytic unit that accepts not only β-nicotinamide mononucleotide (β-NMN) but also inorganic pyrophosphate as leaving groups for template-dependent RNA ligation. Although this property is interesting from an evolutionary viewpoint regarding primitive RNA ligation/polymerization systems in the RNA world, structural analysis of the YFL ribozyme has not been continued due to apparent structural nonuniformity of its folded state. To elucidate the active structure of the YFL ribozyme, we performed in vitro evolution experiments to improve its folding ability. Biochemical and phylogenetic analyses of evolved variants indicated that the catalytic unit of the YFL ribozyme is compact and the 3′ single-stranded region of the parent YFL-1 ribozyme contributes to mask an element that could form an inactive structure.

Rational optimization of the DSL ligase ribozyme with GNRA/receptor interacting modules

The DSL ribozyme is a class of artificial ligase ribozymes with a highly modular architecture, which catalyzes template-directed RNA ligation on a helical substrate module that can be either covalently connected (cis-DSL) or physically separated (trans-DSL) from the catalytic module. Substrate recognition by the catalytic module is promoted by one or two sets of GNRA/receptor interactions acting as clamps in the cis or trans configurations, respectively. In this study, we have rationally designed and analyzed the catalytic and self-assembly properties of several trans-DSL ribozymes with different sets of natural and artificial GNRA-receptor clamps. Two variants newly designed in this study showed significantly enhanced catalytic properties with respect of the original trans-DSL construct. While this work allows dissection of the turnover and catalytic properties of the trans-DSL ribozyme, it also emphasizes the remarkable modularity of RNA tertiary structure for nano-construction of complex functions.

Tailoring RNA modular units on a common scaffold: a modular ribozyme with a catalytic unit for beta-nicotinamide mononucleotide-activated RNA ligation

A novel ribozyme that accelerates the ligation of beta-nicotinamide mononucleotide (beta-NMN)-activated RNA fragments was isolated and characterized. This artificial ligase ribozyme (YFL ribozyme) was isolated by a "design and selection" strategy, in which a modular catalytic unit was generated on a rationally designed modular scaffold RNA. Biochemical analyses of the YFL ribozyme revealed that it catalyzes RNA ligation in a template-dependent manner, and its activity is highly dependent on its architecture, which consists of a modular scaffold and a catalytic unit. As the design and selection strategy was used for generation of DSL ribozyme, isolation of the YFL ribozyme indicated the versatility of this strategy for generation of functional RNAs with modular architectures. The catalytic unit of the YFL ribozyme accepts not only beta-NMN but also inorganic pyrophosphate and adenosine monophosphate as leaving groups for RNA ligation. This versatility of the YFL ribozyme provides novel insight into the possible roles of beta-NMN (or NADH) in the RNA world.

A designed RNA selection: establishment of a stable complex between a target and selectant RNA via two coordinated interactions

In this paper, we describe a new method for selecting RNA aptamers that cooperatively bind to two specific sites within a target RNA. We designed a selection system in which two RNAs, a target RNA and a RNA pool, were assembled by employing a pre-organized GAAA tetraloop-11-nt receptor interaction. This allows us to select the binding sequence against a targeted internal loop as well as a linker region optimized for binding of the two binding sites. After the selection, the aptamers bound with dissociation constants in the nanomolar range, thereby forming a stable complex with the target RNA. Thus this method enables identification of aptamers for a specific binding site together with a linker for cooperative binding of the two RNAs. It appears that our new method can be applied generally to select RNAs that adhere tightly to a target RNA via two specific sites. The method can also be applicable for further engineering of both natural and artificial RNAs.

Synthetic biology with RNA motifs

Structural motifs in naturally occurring RNAs and RNPs can be employed as new molecular parts for synthetic biology to facilitate the development of novel devices and systems that modulate cellular functions. In this review, we focus on the following: (i) experimental evolution techniques of RNA molecules in vitro and (ii) their applications for regulating gene expression systems in vivo. For experimental evolution, new artificial RNA aptamers and RNA enzymes (ribozymes) have been selected in vitro. These functional RNA molecules are likely to be applicable in the reprogramming of existing gene regulatory systems. Furthermore, they may be used for designing hypothetical RNA-based living systems in the so-called RNA world. For the regulation of gene expressions in living cells, the development of new riboswitches allows us to modulate the target gene expression in a tailor-made manner. Moreover, recently RNA-based synthetic genetic circuits have been reported by employing functional RNA molecules, expanding the repertory of synthetic biology with RNA motifs.

Selection of a novel class of RNA-RNA interaction motifs based on the ligase ribozyme with defined modular architecture

To develop molecular tools for the detection and control of RNA molecules whose functions rely on their 3D structures, we have devised a selection system to isolate novel RNA motifs that interact with a target RNA structure within a given structural context. In this system, a GAAA tetraloop and its specific receptor motif (11-ntR) from an artificial RNA ligase ribozyme with modular architecture (the DSL ribozyme) were replaced with a target structure and random sequence, respectively. Motifs recognizing the target structure can be identified by in vitro selection based on ribozyme activity. A model selection targeting GAAA-loop successfully identified motifs previously known as GAAA-loop receptors. In addition, a new selection targeting a C-loop motif also generated novel motifs that interact with this structure. Biochemical analysis of one of the C-loop receptor motifs revealed that it could also function as an independent structural unit.

RNA and RNP as new molecular parts in synthetic biology

Synthetic biology has a promising outlook in biotechnology and for understanding the self-organizing principle of biological molecules in life. However, synthetic biologists have been looking for new molecular "parts" that function as modular units required in designing and constructing new "devices" and "systems" for regulating cell function because the number of such parts is strictly limited at present. In this review, we focus on RNA/ribonucleoprotein (RNP) architectures that hold promise as new "parts" for synthetic biology. They are constructed with molecular design and an experimental evolution technique. So far, designed self-folding RNAs, RNA (RNP) enzymes, and nanoscale RNA architectures have been successfully constructed by utilizing Watson-Crick base-pairs together with specific RNA-RNA or RNA-protein binding motifs of known defined 3D structures. Riboregulators for regulating targeted gene expression have also been designed and produced in vitro as well as in vivo. Lately, RNA and ribonucleoprotein complexes have been strongly attracting the attention of molecular biologists because a variety of noncoding RNAs discovered in nature perform spatiotemporal gene expressions. Thus we hope that newly accumulating knowledge on naturally occurring RNAs and RNP complexes will provide a variety of new parts, devices and systems for synthetic biology.

The architectonics of programmable RNA and DNA nanostructures

The past several years have witnessed the emergence of a new world of nucleic-acid-based architectures with highly predictable and programmable self-assembly properties. For almost two decades, DNA has been the primary material for nucleic acid nanoconstruction. More recently, the dramatic increase in RNA structural information led to the development of RNA architectonics, the scientific study of the principles of RNA architecture with the aim of constructing RNA nanostructures of any arbitrary size and shape. The remarkable modularity and the distinct but complementary nature of RNA and DNA nanomaterials are revealed by the various self-assembly strategies that aim to achieve control of the arrangement of matter at a nanoscale level.

An efficient thermally induced RNA conformational switch as a framework for the functionalization of RNA nanostructures

RNA offers a variety of interactions and dynamic conformational switches not available with DNA that may be exploited for the construction of nanomolecular structures. Here, we show how the RNA loop-loop, or "kissing", interaction can be used to construct specific circular RNA arrangements that are capable of thermal isomerization to alternative structures. We also show how this thermally induced structural rearrangement can be used to unmask a functional RNA structure, in this case, a peptide-binding RNA structure, the Rev-response element (RRE) of HIV, thereby acting as a functional peptide-binding switch. The relative ease with which the RRE could be engineered into the RNA substrates suggested that a variety of functional RNA structures may be introduced. In addition, the structural rearrangement was extremely efficient, showing that the "kissing" complexes described in this study may provide a useful framework for the construction of functional RNA-based nanostructures, as well as aid in our understanding of the way RNA functions in biological systems.

Controlling RNA self-assembly to form filaments

Fundamental control over supra-molecular self-assembly for organization of matter on the nano-scale is a major objective of nanoscience and nanotechnology. 'RNA tectonics' is the design of modular RNA units, called tectoRNAs, that can be programmed to self-assemble into novel nano- and meso-scopic architectures of desired size and shape. We report the three-dimensional design of tectoRNAs incorporating modular 4-way junction (4WJ) motifs, hairpin loops and their cognate loop-receptors to create extended, programmable interaction interfaces. Specific and directional RNA-RNA interactions at these interfaces enable conformational, topological and orientational control of tectoRNA self-assembly. The interacting motifs are precisely positioned within the helical arms of the 4WJ to program assembly from only one helical stacking conformation of the 4WJ. TectoRNAs programmed to assemble with orientational compensation produce micrometer-scale RNA filaments through supra-molecular equilibrium polymerization. As visualized by transmission electron microscopy, these RNA filaments resemble actin filaments from the protein world. This work emphasizes the potential of RNA as a scaffold for designing and engineering new controllable biomaterials mimicking modern cytoskeletal proteins.

Structural and biochemical characterization of DSL ribozyme

We recently reported on the molecular design and synthesis of a new RNA ligase ribozyme (DSL), whose active site was selected from a sequence library consisting of 30 random nucleotides set on a defined 3D structure of a designed RNA scaffold. In this study, we report on the structural and biochemical analyses of DSL. Structural analysis indicates that the active site, which consists of the selected sequence, attaches to the folded scaffold as designed. To see whether DSL resembles known ribozymes, a biochemical assay was performed. Metal-dependent kinetic studies suggest that the ligase requires Mg2+ ions. The replacement of Mg2+ with Co(NH3)6(3+) prohibits the reaction, indicating that DSL requires innersphere coordination of Mg2+ for a ligation reaction. The results show that DSL has requirements similar to those of previously reported catalytic RNAs.

In vitro RNA random pools are not structurally diverse: a computational analysis

In vitro selection of functional RNAs from large random sequence pools has led to the identification of many ligand-binding and catalytic RNAs. However, the structural diversity in random pools is not well understood. Such an understanding is a prerequisite for designing sequence pools to increase the probability of finding complex functional RNA by in vitro selection techniques. Toward this goal, we have generated by computer five random pools of RNA sequences of length up to 100 nt to mimic experiments and characterized the distribution of associated secondary structural motifs using sets of possible RNA tree structures derived from graph theory techniques. Our results show that such random pools heavily favor simple topological structures: For example, linear stem-loop and low-branching motifs are favored rather than complex structures with high-order junctions, as confirmed by known aptamers. Moreover, we quantify the rise of structural complexity with sequence length and report the dominant class of tree motifs (characterized by vertex number) for each pool. These analyses show not only that random pools do not lead to a uniform distribution of possible RNA secondary topologies; they point to avenues for designing pools with specific simple and complex structures in equal abundance in the goal of broadening the range of functional RNAs discovered by in vitro selection. Specifically, the optimal RNA sequence pool length to identify a structure with x stems is 20x.

Modular RNA architecture revealed by computational analysis of existing pseudoknots and ribosomal RNAs

Modular architecture is a hallmark of RNA structures, implying structural, and possibly functional, similarity among existing RNAs. To systematically delineate the existence of smaller topologies within larger structures, we develop and apply an efficient RNA secondary structure comparison algorithm using a newly developed two-dimensional RNA graphical representation. Our survey of similarity among 14 pseudoknots and subtopologies within ribosomal RNAs (rRNAs) uncovers eight pairs of structurally related pseudoknots with non-random sequence matches and reveals modular units in rRNAs. Significantly, three structurally related pseudoknot pairs have functional similarities not previously known: one pair involves the 3′ end of brome mosaic virus genomic RNA (PKB134) and the alternative hammerhead ribozyme pseudoknot (PKB173), both of which are replicase templates for viral RNA replication; the second pair involves structural elements for translation initiation and ribosome recruitment found in the viral internal ribosome entry site (PKB223) and the V4 domain of 18S rRNA (PKB205); the third pair involves 18S rRNA (PKB205) and viral tRNA-like pseudoknot (PKB134), which probably recruits ribosomes via structural mimicry and base complementarity. Additionally, we quantify the modularity of 16S and 23S rRNAs by showing that RNA motifs can be constructed from at least 210 building blocks. Interestingly, we find that the 5S rRNA and two tree modules within 16S and 23S rRNAs have similar topologies and tertiary shapes. These modules can be applied to design novel RNA motifs via build-up-like procedures for constructing sequences and folds.

Building programmable jigsaw puzzles with RNA

One challenge in supramolecular chemistry is the design of versatile, self-assembling building blocks to attain total control of arrangement of matter at a molecular level. We have achieved reliable prediction and design of the three-dimensional structure of artificial RNA building blocks to generate molecular jigsaw puzzle units called tectosquares. They can be programmed with control over their geometry, topology, directionality, and addressability to algorithmically self-assemble into a variety of complex nanoscopic fabrics with predefined periodic and aperiodic patterns and finite dimensions. This work emphasizes the modular and hierarchical characteristics of RNA by showing that small RNA structural motifs can code the precise topology of large molecular architectures. It demonstrates that fully addressable materials based on RNA can be synthesized and provides insights into self-assembly processes involving large populations of RNA molecules.

Generation of a catalytic module on a self-folding RNA

It is theoretically possible to obtain a catalytic site of an artificial ribozyme from a random sequence consisting of a limited numbers of nucleotides. However, this strategy has been inadequately explored. Here, we report an in vitro selection technique that exploits modular construction of a structurally constrained RNA to acquire a catalytic site for RNA ligation from a short random sequence. To practice the selection, a sequence of 30 nucleotides was located close to the putative reaction site in a derivative of a naturally occurring self-folding RNA whose crystal structure is known. RNAs whose activity depended on the starting three-dimensional structure were selected with 3'-5' ligation specificity, indicating that the strategy can be used to acquire a variety of catalytic sites and other functional RNA modules.

De novo synthesis and development of an RNA enzyme

Arbitrary manipulation of molecular recognition at the atomic level has many applications. However, systematic design and de novo synthesis of an artificial enzyme based on such manipulation has been a long-standing challenge in the field of chemistry and biotechnology. In this report, we developed an artificial RNA ligase by implementing a synthetic strategy that fuses a series of 3D molecular modelings based on naturally occurring RNA-RNA recognition motifs with a small-scale combinatorial synthesis of a modular catalytic unit. The resulting ligase produces a 3'-5' linkage in a template-directed manner for any combinations of two nucleotides at the reaction site. The reaction rate is 10(6)-fold over that of the uncatalyzed reaction with a yield higher than those of previously reported ligase ribozymes. The strategy may be applicable to the synthesis and development of a variety of nonnatural functional RNAs with defined 3D structures.

Characterization of tectoRNA assembly with cationic conjugated polymers

Association between RNAs with preprogrammed molecular recognition units can be quantified by using cationic, water-soluble conjugated polymers. The method uses a fluorophore-labeled probe RNA (RNA-F*), which is treated with a target structure (RNA-T). Heterodimer formation, (RNA-T/RNA-F*), increases the total negative charge on the F*-bearing macromolecule and reduces the number of negatively charged molecules (relative to unbound RNA-T+ RNA-F*). On the basis of electrostatic interactions, we anticipated more effective binding between CCP and (RNAT/RNA-F*), a reduction of the average CCP- - -F* distance, and more effective FRET upon excitation of the conjugated polymer. The resulting signals benefit from the optical amplification characteristic of emissive conjugated polymers. Solution dissociation constants can be determined by monitoring F* intensity changes as a function of [RNA-F*] and the ratio: [I(T) - I(NB)]/I(NB), where I(T) and I(NB) are the F* intensities in the presence of the target RNA (RNA-T) and a nonbinding RNA (RNA-NB), respectively, while keeping the concentration of the conjugated polymer constant. By focusing on [I(T) - I(NB)]/I(NB) as a function of RNA concentration, one can detect the concentration range wherein increased fluorescence is the result of dimerization.

Biochemical characterization of the kink-turn RNA motif

RNA, which acts as a medium for transmitting genetic information, plays a variety of roles in a cell. As with proteins, elucidation of the three- dimensional (3D) structures of RNAs is important for understanding their various roles. Determination of the atomic structures of crystallized ribosome has enabled the identification of previously unknown RNA structural motifs. The kink-turn (K-turn or GA) motif, which causes a sharp bend in an RNA double helix, was identified as one of these structural motifs. To biochemically characterize the K-turn, the motif was inserted into a hinge region of P4-P6 RNA, which is the most extensively studied self-folding RNA, and its properties were investigated. The stability and metal ion requirement of the constructs containing three different K-turn motifs were analyzed using native PAGE and dimethyl sulfate (DMS) modification. The formation of the sharp bending structure depends on the presence of divalent cation like Mg2+ or Ca2+, although its required concentration is different for each motif.