Electrostriction and dynamics of solid supported lipid films

Binding of a Myristoylated Protein to the Lipid Membrane Influenced by Interactions with the Polar Head Group Region

Many cytoplasmic proteins contain a hydrophobic acyl chain, which facilitates protein binding to cell membranes. Hydrophobic interactions between the exposed acyl chain of the protein and hydrocarbon chains of lipids in the cell membrane are the driving force for this specific lipid-protein interaction. Recent studies point out that in addition to hydrophobic interactions the charge-charge and charge-dipole interactions between the polar head groups and basic amino acids contribute significantly to the binding process. Recoverin possesses a myristoyl chain at the N-terminus. In the presence of Ca²⁺ ions, the protein undergoes structural rearrangements, leading to the extrusion of the myristoyl chain, facilitating the protein binding to the membrane. In this work, we investigate the impact of interactions between the polar head group region of lipid molecules and recoverin which binds to the model membrane. The interaction with a planar lipid bilayer composed of phosphatidylcholine and cholesterol with myristoylated and nonmyristoylated recoverin is studied by in situ polarization modulation infrared reflection absorption spectroscopy. The binding of recoverin to the lipid bilayer depends on the transmembrane potential, indicating that the orientation of the permanent surface dipole in the supramolecular assembly of the lipid membrane influences the protein attachment to the membrane surface. Analysis of the amide I' mode indicates that the orientation of recoverin bound to the lipid bilayer is independent of the presence of myristoyl chain in the protein and of the folding of the protein into the tense or relaxed state. In contrast, it changes as a function of the membrane potential. At positive transmembrane potentials, the α-helical fragments of recoverin are oriented predominantly parallel to the bilayer surface. This orientation facilitates the insertion of the acyl chain of the protein into the hydrophobic region of the bilayer. At negative transmembrane potentials, the α-helical fragments of recoverin change their orientation with respect to the membrane surface, which is followed by the removal of the myristoyl chain from the membrane.

Impact of the protein myristoylation on the structure of a model cell membrane in a protein bound state

The neuronal calcium sensor protein recoverin is expressed in retinal rod and cone cells and is involved in the calcium-dependent control of receptor (rhodopsin) phosphorylation and receptor inactivation. In its Ca²⁺-saturated form recoverin is attached to membranes by an exposed myristoyl group and responds to oscillating changes of intracellular Ca²⁺-concentration by performing a so-called Ca²⁺-myristoyl switch. In this work we analyze changes in a liquid lipid bilayer interacting with myristoylated and non-myristoylated recoverin by employing polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) with electrochemical control. The lipid bilayer is transferred onto a polycrystalline gold electrode using Langmuir-Blodgett Langmuir-Schaefer transfer at the surface pressure π = 30 mN m^-1 which ensures, necessary for the lipid-protein interaction, liquid state of the hydrocarbon chains of phospholipids. The model lipid bilayers are adsorbed directly on the Au electrode surface at transmembrane potentials -0.2 < ∆ϕM|S < 0.25 V. The interaction with recoverin leads to a stabilization of the adsorbed state of the lipid bilayer at positive transmembrane potentials. The interaction leads to a decrease in the surface charge density that accumulates on the membrane covered electrode surface, indicating changes in the lateral interactions in the lipid membrane. In situ spectroelectrochemical studies confirm orientation changes in the hydrophobic environment of the model membrane. Insertion of the myristoyl group of recoverin into the membrane is connected with an increase in the tilt of the hydrocarbon chains with respect to the surface normal and decrease in the bilayer thickness. Potential-induced pore formation and desorption of the lipid bilayer from the membrane surface is accompanied by the removal of the acyl chains of recoverin from the membrane.

Toward Realistic Large-Area Cell Membrane Mimics: Excluding Oil, Controlling Composition, and Including Ion Channels

Capacitance measurements provide unique insights into the thickness, compressibility, and composition of large-area membrane bilayers and are used here in addition to demonstrate the successful incorporation of model ion channels. The simultaneous ability to control the bilayer size, manipulate tension, and optically monitor and electrically stimulate freestanding membranes enables precise determination of their specific capacitance and thickness across a wide range of areas. We confirm that membranes formed by this recently developed technique have capacitive properties similar to those formed by existing protocols, including solvent-free approaches, and discuss the effect using either hexadecane or squalene as the oil solvent. The results obtained here are relevant for other methods where lipid membranes are reconstituted from a bulk oil solvent. Because biological membranes have a diverse phospholipid profile, we show that the technique can successfully reconstitute membranes with binary composition mixtures. As an outlook, we show the capability of model membrane proteins, specifically α-hemolysin and alamethicin, to be incorporated into the formed bilayers and measure ion transport.

Reduction in Tension and Stiffening of Lipid Membranes in an Electric Field Revealed by X-Ray Scattering

The effect of ac electric fields on the elasticity of supported lipid bilayers is investigated at the microscopic level using grazing incidence synchrotron x-ray scattering. A strong decrease in the membrane tension up to 1  mN/m and a dramatic increase of its effective rigidity up to 300  k_{B}T are observed for local electric potentials seen by the membrane ≲1  V. The experimental results are analyzed using detailed electrokinetic modeling and nonlinear Poisson-Boltzmann theory. Based on a modeling of the electromagnetic stress, which provides an accurate description of the bilayer separation versus pressure curves, we show that the decrease in tension results from the amplification of charge fluctuations on the membrane surface whereas the increase in bending rigidity results from the direct interaction between charges in the electric double layer. These effects eventually lead to a destabilization of the bilayer and vesicle formation. Similar effects are expected at the tens of nanometers length scale in cell membranes with lower tension, and could explain a number of electrically driven processes.

Electric field driven changes of a gramicidin containing lipid bilayer supported on a Au(111) surface

Langmuir-Blodgett and Langmuir-Schaeffer methods were employed to deposit a mixed bilayer consisting of 90% of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 10% of gramicidin (GD), a short 15 residue ion channel forming peptide, onto a Au(111) electrode surface. This architecture allowed us to investigate the effect of the electrostatic potential applied to the electrode on the orientation and conformation of DMPC molecules in the bilayer containing the ion channel. The charge density data were determined from chronocoulometry experiments. The electric field and the potential across the membrane were determined through the use of charge density curves. The magnitudes of potentials across the gold-supported biomimetic membrane were comparable to the transmembrane potential acting on a natural membrane. The information regarding the orientation and conformation of DMPC and GD molecules in the bilayer was obtained from photon polarization modulation infrared reflection absorption spectroscopy (PMIRRAS) measurements. The results show that the bilayer is adsorbed, in direct contact with the metal surface, when the potential across the interface is more positive than -0.4 V and is lifted from the gold surface when the potential across the interface is more negative than -0.4 V. This change in the state of the bilayer has a significant impact on the orientation and conformation of the phospholipid and gramicidin molecules. The potential induced changes in the membrane containing peptide were compared to the changes in the structure of the pure DMPC bilayer determined in earlier studies.

Structure from substrate supported lipid bilayers (Review)

Highly aligned, substrate supported membranes have made it possible for physical techniques to extract unambiguous structural information previously not accessible from commonly available membrane dispersions, or so-called powder samples. This review will highlight some of the major breakthroughs in model membrane research that have taken place as a result of substrate supported samples.

Potential-driven structural changes in Langmuir-Blodgett DMPC bilayers determined by in situ spectroelectrochemical PM IRRAS

Combined Langmuir-Blodgett vertical withdrawing and Langmuir-Schaefer horizontal touch (LB-LS) methods were employed to transfer DMPC bilayers onto a Au(111) electrode surface. Charge density measurements and photon polarization modulation infrared reflection absorption spectroscopy were employed to investigate electric field induced changes in the structure of the bilayer. The results show that the physical state and the molecular arrangement found in the monolayer at the air-water interface is to a large extent preserved in the bilayer formed by the LB-LS method. This approach provides an opportunity to produce supported bilayers with a well-designed architecture. The properties of the bilayer formed by the LB-LS method were compared to the properties of the bilayer produced by spontaneous fusion of unilamellar vesicles investigated in an earlier study (Bin, X.; Zawisza, I.; Lipkowski, J. Langmuir 2005, 21, 330-347). The tilt angles of the acyl chains are much smaller in the bilayer formed by the LB-LS method and are closer to the angles observed for vesicles and stacked hydrated bilayers. The tilt angles of the phosphate and choline groups are also smaller and are characteristic of an orientation in which the area per DMPC molecule is small. The electric field induced changes of these angles are also less pronounced in the bilayer formed by the LB-LS method. We have shown that these differences are a result of the higher packing density of the phospholipid molecules in the bilayer formed by the LB-LS method.

Effects of divalent cations on the formation and structure of solid supported lipid films

The interaction of glassy carbon-supported thin wetting films of lecithin with some divalent cations is investigated by impedimetry and voltammetry. The influence of Ca2+, Mg2+, and Mn2+ on the film structure is explored in two different cases--the divalent cations are added to the electrolyte either before or after the formation of the film. When the film has been previously formed, the addition of divalent cations in millimolar concentrations leads to changes in the passive electrical parameters and the blocking properties of the films. On the one hand the dielectric properties of the film measured in 0.1 M KCl seem to improve after the interaction with divalent cations--the film capacitance decreases, the resistance and resistivity of the film increase. On the other hand the increase of the redox current in the presence of 1 mM Fe(CN)6(3-/4-) in the electrolyte suggests the formation of some defects in the lipid structure of the film after the action of divalent cations. It is shown that the amount of these defects could be significantly decreased when the divalent cations are present in the electrolyte solution before the film formation. The effect of divalent cations on the film stability is tested by applying negative potential to the film. In 0.1 M KCl the films are not stable at potential of - 0.8 V (vs. Ag/AgCl) and are destroyed. The addition of divalent cations stabilizes the films and at certain millimolar concentrations the films remain intact after the action of the negative potential. The effect of Mn2+ is more pronounced, the Ca2+ and Mg2+ have smaller commensurate effect. It is proposed that the changes in the films' properties could be related with more tight packing of the lipid molecules with the divalent cations inserted in the film and that some defects could be opened during the rearrangement of the lipids when the film has been previously formed.

Structure and physical properties of biomembranes and model membranes

Biomembranes belong to the most important structures of the cell and the cell organels. They play not only structural role of the barrier separating the external and internal part of the membrane but contain also various functional molecules, like receptors, ionic channels, carriers and enzymes. The cell membrane also preserves non-equillibrium state in a cell which is crucial for maintaining its excitability and other signaling functions. The growing interest to the biomembranes is also due to their unique physical properties. From physical point of view the biomembranes, that are composed of lipid bilayer into which are incorporated integral proteins and on their surface are anchored peripheral proteins and polysaccharides, represent liquid scrystal of smectic type. The biomembranes are characterized by anisotropy of structural and physical properties. The complex structure of biomembranes makes the study of their physical properties rather difficult. Therefore several model systems that mimic the structure of biomembranes were developed. Among them the lipid monolayers at an air-water interphase, bilayer lipid membranes (BLM), supported bilayer lipid membranes (sBLM) and liposomes are most known. This work is focused on the introduction into the "physical word" of the biomembranes and their models. After introduction to the membrane structure and the history of its establishment, the physical properties of the biomembranes and their models areare stepwise presented. The most focus is on the properties of lipid monolayers, BLM, sBLM and liposomes that were most detailed studied. This contribution has tutorial character that may be usefull for undergraduate and graduate students in the area of biophysics, biochemistry, molecular biology and bioengineering, however it contains also original work of the author and his co-worker and PhD students, that may be usefull also for specialists working in the field of biomembranes and model membranes.

Interaction of thin wetting films of lecithin with some divalent cations

The impact of some divalent cations on the structure of a model membrane system, comprising wetting lipid films, is assayed in this work. The results from impedimetry suggest prominent structural changes upon the addition of the discussed ions to the electrolyte solution contacting the film. These changes are manifested by the increase of resistivity of the films as well as by the decrease of capacitance dispersion. In accordance with other data in the literature, manganese (Mn(2+)) turned out to have an effect greater than those of Mg(2+) and Ca(2+).

Wetting films of lipids in the development of sensitive interfaces. An electrochemical approach

Solid-supported thin liquid films of lipids, contacting an electrolyte phase, turned out to be a dependable system in the field of bosensors. The investigations of these objects during the past decade reveal some of their intriguing features enabling the application in constructions of receptor part with 'two-dimensional' arrangement. As a model system, complementary to the other artificial analogs of biomembranes, the wetting films of lipids offer certain advantages concerning the compromise between the stability and flexibility of the molecular structures involved in sensing. The basic principles underlaying the techniques of formation, as well as the conditions of the films stability are emphasized in the present consized review. While no limitations are imposed by the way of preparation, the films seem especially profitable in conjunction with methods for electrochemical signal transduction. In this regard some prominent examples are discussed.

Electric field-induced changes in lipids investigated by modulated excitation FTIR spectroscopy

The effect of electric fields on dry oriented multibilayers of dimyristoylphosphatidylcholine (DMPC) was investigated by transmission Fourier transform infrared electric field modulated excitation (E-ME) spectroscopy. A periodic rectangular electric potential (0-150 V, 1.25 Hz, 28.4 degrees C +/- 0.2 degrees C) was applied across the sample. To discriminate electric field-induced effects from possible temperature-induced effects resulting from a current flow (<1 pA) across the sample, corresponding temperature-modulated excitation (T-ME) measurements within the temperature uncertainty limits of +/-0.2 degrees C at 28.4 degrees C were performed. T-ME induced reversible gauche defects in the hydrocarbon chains, whereas E-ME resulted in reversible compression of dry DMPC bilayers. Periodic variation of the tilt angle of the hydrocarbon chains is suggested. The degree of absorbance modulation in the CH-stretching region was found to be in the order of 1:700, corresponding to a variation of the bilayer thickness of Deltaz = 0.0054 nm. Using a series connection of capacitors as equivalent circuit of the cell resulted in E = (1.2 +/- 0.7) x 10(7) V/m for the electric field in DMPC. Young's elasticity modulus of DMPC could be calculated to be E( perpendicular ) = 2.2 x 10(6) Pa +/- 1.8 x 10(6) Pa, which is in good agreement with published data obtained by electric field-dependent capacitance measurements.