A comparison of intravascular source designs based on the beta particle emitter 114mIn/114In. Line source versus stepping source

Flexible Coils with a Drug-Releasing Hydrophilic Coating: A New Platform for Controlled Delivery of Drugs to the Eye?

Delivery of drugs to the front-side of the eye is routinely done through eye drops. It is known that approximately 80% of each eye-drop is lost, as a result of rapid clearance of the tear fluid via the naso-lacrymal canal. Consequently, repeated administration through several droplets is usually necessary to achieve a desired effect, such as widening of the pupil prior to corneal surgery. A new ocular drug delivery device was studied. The new device is believed to provide a basis for a more convenient and efficient method for ocular drug delivery. The device is a metallic coil with a hydrophilic, drug-containing polymeric coating. The coil is placed in the conjuctival fornix (under the lower eye-lid) and the drug is slowly released by diffusion into the tear fluid. The capacity of the device could be increased by using the lumen of the coils as a depot for the drug to be released. Preliminary experiments with the new device were performed largely in vitro and in vivo. The latter experiments involved the release of a fluorescent dye and atropine (a potent mydriatic agent) in the eye of several healthy volunteers. The first results obtained with the new device indicate its potential utility. More research and development work is required to define the optimal design of the coil in order to minimize the risk of irritation. Furthermore, the parameters that define the kinetics of the intraocular drug release must be defined and optimized with respect to the exact application.

Monte Carlo characterization of biocompatible beta-emitting 90Y glass seed incorporated with the radionuclide 153Sm as a SPECT marker for brachytherapy applications

A glass seed consisting of the β--emitting radionuclide 90Y incorporated with radionuclide 153Sm as SPECT marker is proposed for potential application in brachytherapy in order to reduce the undesirable dose to healthy adjacent organs. The aim of this work is to determine the dosimetric characteristics, as suggested in the AAPM TG-60/TG-149 reports, for this seed using Monte Carlo simulation. Monte Carlo codes MCNP5, EGSnrc, and FLUKA were used to calculate the absorbed dose distribution around the seed. Dosimetric parameters, such as reference absorbed dose rate, radial dose function, and one-dimensional (1D) and two-dimensional (2D) anisotropy functions, were obtained. The computational results from these three codes are in agreement within 5.4% difference on average. The absorbed dose rate at the reference point was estimated to be 5.01 cGy h-1 μCi-1 and self absorption of YAS glass seed amounted to 30.51%. The results showed that, with thermal neutron bombardment of 5 hours in a typical flux, sufficient activity for applications in brachytherapy may be achieved. With a 5 mCi initial activity, the total dose of a YAS glass seed was estimated to be 1.38 Gy at 1.0 cm from the seed center. Comparing with gamma emitting seeds, the 90Y seed could reduce undesirable doses to adjacent organs, because of the rapid dose falloff of beta ray. Because of the high R90 value of 5.5 mm, fewer number of 90Y seeds will be required for an interstitial brachytherapy treatment using permanent implant, in comparison with other beta-emitting seeds. The results would be helpful in the development of the radioactive implants using 90Y glass seeds for the brachytherapy treatment.

C-type natriuretic peptide for reduction of restenosis: gene transfer is superior over single peptide administration

BACKGROUND

Restenosis is still a significant clinical problem limiting the long-term therapeutic success following balloon dilation or stent implantation. New approaches are necessary inhibiting neointima formation and simultaneously promoting re-endothelialization. Therefore, long-term therapeutic effects of adventitial liposome-mediated C-type natriuretic protein (CNP) gene and CNP peptide applications in a porcine model for restenosis post-angioplasty were investigated.

METHODS

For in vitro applications, primary cultures of porcine vascular smooth muscle cells (VSMCs) and endothelial cells (ECs) were used. Gene transfer was performed with cationic lipid DOCSPER [1,3-dioleoyloxy-2-(N5-carbamoylspermine)propane]. In vivo treatment of pig femoral arteries was adventitial using a needle injection catheter following balloon angioplasty. Arteries were investigated by angiography, Evan's blue staining, histomorphometry, immunohistochemistry, PCR and RT-PCR.

RESULTS

Using CNP gene transfer in vitro, 29.4+/-7.2% reduction of cell proliferation in VSMCs was observed. In ECs, the CNP gene did not compromise cellular growth. For the CNP peptide the optimal concentration was 1 mM with 50.7+/-11.3% reduction of VSMC proliferation and 12.1+/-5.3% enhancement of growth of ECs. Three weeks following application in vivo complete re-endothelialization was observed in all treated groups. At 3 months significant reduction of neointima formation was observed using CNP gene vs. CNP peptide (85.9+/-7.8% vs. 63.3+/-27.6% reduction, P<0.05) compared to control treatment.

CONCLUSION

Periadventitial liposome-mediated CNP gene transfer in vivo resulted in a significant long-term reduction of neointima formation without compromising endothelial repair and was superior over single CNP peptide administration. Advantages of CNP are its physiological origin and simultaneous inhibition of VSMC proliferation and promotion of EC growth.

Particle debris from a nanoporous stent coating obscures potential antiproliferative effects of tacrolimus-eluting stents in a porcine model of restenosis

Polymer stent coatings may not be suitable for drug elution because of inherent proinflammatory effects. A previous study suggested a beneficial effect of a stent eluting tacrolimus from a nanoporous ceramic aluminum oxide coating in a rabbit restenosis model. We investigated whether this stent is effective in preventing in-stent restenosis in a porcine restenosis model. Thirty-four juvenile swine underwent balloon overstretch injury and were subjected to implantation of either stainless steel (bare) stents, bare stents coated with nanoporous aluminum oxide alone, and coated stents eluting 50 and 180 mug of tacrolimus (FK506). In-stent restenosis was quantified at 1 and 3 months after stent placement by histomorphometry. A significant increase of neointimal hyperplasia was noted with the stents coated with aluminum oxide alone compared with bare stents (2.92 +/- 1.02 and 1.38 +/- 0.51 mm(2), respectively; P < 0.02). In all arteries containing coated stents, particle debris was found in the media and neointima, resulting in augmented vascular inflammation. In the group of stents coated with aluminum oxide, FK506 elution at a dose 180 mug reduced neointimal hyperplasia vs. no drug elution (1.66 +/- 0.49 vs. 2.92 +/- 1.02 mm(2); 180 mug vs. ceramic alone; P < 0.03). At a dose of 50 mug stent-based delivery of FK506, no reduction of neointimal hyperplasia was found (2.88 +/- 1.31 and 2.92 +/- 1.02 mm(2), respectively; P = NS; FK506 vs. ceramic alone). In summary, particle debris shed from a drug-eluting aluminum oxide coating of a stainless steel stent counteracts potential antiproliferative effects of stent-based tacrolimus delivery in a porcine model of restenosis. We propose that stent coatings eluting drugs need to be routinely tested for being tightly anchored into the stent surface. Alternatively, omission of any coating used as a drug reservoir may eliminate inflammatory particle debris after placement of drug-eluting stents.