MXenes for electrocatalysis applications: Modification and hybridization

Nanoflower-Like High-Entropy Co-Fe-Cr-Mo-Mn Spinel for Oxygen Evolution

Oxygen evolution reaction (OER) is the key anode reaction of electrolytic water. To improve the slow OER kinetics, we synthesize nanoflower-like Co-Fe-Cr-Mo-Mn high-entropy spinel (HES) nanosheets on nickel foam (NF) by one-step solvothermal method, which exhibit an overpotential (η10) of only 188 mV at 10 mA cm-2, much lower than bimetallic CoFeOx/NF (233 mV), trimetallic CoFeCrOx/NF (211 mV), and tetrametallic CoFeCrMoOx/NF (200 mV). The OER overpotential decreases with the increase of the number of metals, indicating that the formation of HES has a positive effect on the improvement of electrocatalytic performance, since the synergistic effect between different metals enhances the charge transfer rate and decreases reaction barrier. In-situ Raman spectra demonstrate that the formation of γ-NiOOH on the HES surface is a crucial active species for the OER. This work demonstrates a simple and efficient synthesis method to prepare nanoflower-like high-entropy electrocatalysts for efficient OER electrocatalysis.

Ionic liquid-assisted synthesis of N, F, and B co-doped BiOBr/Bi2Se3 on Mo2CTx for enhanced performance in hydrogen evolution reaction and supercapacitors

Heteroatom doping and heterojunction formation are effective strategies to enhance electrochemical performance. In this study, we present a novel approach that utilizes an ionic liquid-assisted synthesis method to fabricate a BiOBr-based material, which is subsequently loaded onto Mo2CTx via a selenization treatment to create a BiOBr/Bi2Se3 heterostructure, denoted as NBF-BiOBr/Bi2Se3/Mo2CTx. The incorporation of heteroatoms improves its hydrophilicity and electronegativity, while the formation of heterojunctions adjusts the electronic structure at the interface, resulting in lower OH-/H+ adsorption energy. The specific surface area of NBF-BiOBr/Bi2Se3/Mo2CTx is 193.1 m2/g. In hydrogen evolution reaction (HER) tests, NBF-BiOBr/Bi2Se3/Mo2CTx exhibits exceptional catalytic performance in acidic media, requiring only an overpotential of 109 mV to achieve a current density of 10 mA cm-2. Furthermore, NBF-BiOBr/Bi2Se3/Mo2CTx demonstrates superior electrochemical performance in an asymmetric supercapacitor, with an energy density as high as 55.6 Wh kg-1 at a power density of 749.9 Wh kg-1. This work provides a novel approach for heteroatom doping and heterojunction synthesis, offering promising prospects for further advancements in the field.

Recent advancement and key opportunities of MXenes for electrocatalysis

MXenes are promising materials for electrocatalysis due to their excellent metallic conductivity, hydrophilicity, high specific surface area, and excellent electrochemical properties. Herein, we summarize the recent advancement of MXene-based materials for electrocatalysis and highlight their key challenges and opportunities. In particular, this review emphasizes on the major design principles of MXene-based electrocatalysts, including (1) coupling MXene with active materials or heteroatomic doping to create highly active synergistic catalyst sites; (2) construction of 3D MXene structure or introducing interlayer spacers to increase active areas and form fast mass-charge transfer channel; and (3) protecting edge of MXene or in situ transforming the surface of MXene to stable active substance that inhibits the oxidation of MXene and then enhances the stability. Consequently, MXene-based materials exhibit outstanding performance for a variety of electrocatalytic reactions. Finally, the key challenges and promising prospects of the practical applications of MXene-based electrocatalysts are briefly proposed.

Engineering Photo-Cross-Linkable MXene-Based Hydrogels: Durable Conductive Biomaterials for Electroactive Tissues and Interfaces

Light-cured conductive hydrogels have attracted immense interest in the regeneration of electroactive tissues and bioelectronic interfaces. Despite the unique properties of MXene (MX), its light-blocking effect in the range of 300-600 nm hinders the efficient cross-linking of photocurable hydrogels. In this study, we investigated the photo-cross-linking process of MX-gelatin methacrylate (GelMa) composites with different types of photoinitiators and MX concentrations to prepare biocompatible, injectable, conductive, and photocurable composite hydrogels. The examined photoinitiators were Eosin Y, Irgacure 2959 (Type I), and lithium phenyl-2,4,6-trimethylbenzoyl phosphinate (Type II). The light-blocking effect of MX strongly affected the thickness, pore structure, swelling ratio, degradation, and mechanical properties of the light-cured hydrogels. Uniform distribution of MX in the hydrogel matrix was achieved at concentrations up to 0.04 wt % but the film thickness and curing times varied depending on the type of photoinitiator. It was feasible to prepare thin films (0.5 mm) by employing Type I photoinitiators under a relatively long light irradiation (4-5 min) while thick films with centimeter sizes could be rapidly cured by using Type II photoinitiator (<60 s). The mechanical properties, including elastic modulus, toughness, and stress to break for the Type II hydrogels were significantly superior (up to 300%) to those of Type I hydrogels depending on the MX concentration. The swelling ratio was also remarkably higher (648-1274%). A conductivity of about 1 mS/cm was attained at 0.1 mg/mL MX for the composite hydrogel cured by the Type I photoinitiator. In vitro cytocompatibility assays determined that the hydrogels promoted cell viability, metabolic activity, and robust proliferation of C2C12 myoblasts, which indicated their potential to support muscle cell growth during myogenesis. The developed photocurable GelMa-MX hydrogels have the potential to serve as bioactive and conductive scaffolds to modulate cellular functions and for tissue-device interfacing.

Surface defect-engineered Fe doping in layered Co-based complex as highly efficient bifunctional electrocatalysts for overall water splitting

The electrocatalytic splitting of water to produce hydrogen is regarded as an efficient and promising strategy but is limited by its large overpotential; thus, a highly efficient electrocatalyst is urgently needed. Mixed metal doping is an important strategy in defect engineering because the heteroatoms can change the intrinsic structure to form defects by affecting the atomic coordination mode and adjusting the electronic structure, which is often accompanied by morphological changes. Herein, two-dimensional layered bimetallic Co-pydc containing axially coordinated water molecules was selected by producing surface defects through Fe doping in Co centers as bifunctional electrocatalysts for OER and HER. The optimized Co0.59Fe0.41-pydc possesses outstanding OER performance with the lowest overpotential of 262 mV to reach j = 10 mA cm-2, and Co0.75Fe0.25-pydc possesses superior HER performance with the lowest overpotential of 96 mV at j = 10 mA cm-2. Furthermore, the overall water splitting device assembled with Co0.59Fe0.41-pydc@NF//Co0.59Fe0.41-pydc@NF affords a current density of 10 mA cm-2 at only 1.687 V. This work emphasizes the surface defects formed by tuning the electronic structure of metal centres accompanied with morphological changes of bimetallic dopants for efficient overall water splitting.

Application Scopes of Miniaturized MXene-Functionalized Electrospun Nanofibers-Based Electrochemical Energy Devices

Exploring combinatorial materials, as well as rational device configuration design, are assumed to be the key strategies for deploying versatile electrochemical devices. MXene sheets have revealed a high hydrophilic surface with proper mechanical and electrical characteristics, rendering them supreme additive candidates to integrate in electrospun electrochemical power tools. The synergetic effects of MXene 2D layers with the nanofibrous networks can boost actuator responsive ability, battery capacity retention, fuel cell stability, sensor sensitivity, and supercapacitor areal capacitance. Their superior mechanical features can be endowed to the electrospun layers through the embedding of the MXene additive. In this review, the preparation and inherent features of the MXene configurations are briefly evaluated. The fabrication and overall performance of the MXene-loaded nanofibers applicable in electrochemical actuators, batteries, fuel cells, sensors, and supercapacitors are comprehensively figured out. Eventually, an outlook on the future development of MXene-based electrospun composites is presented. A substantial focus has been devoted to date to engineering conjugated MXene and electrospun fibrous frames. The potential performance of the MXene-decorated nanofibers presents a bright future of nanoengineering toward technological growth. Meanwhile, a balance between the pros and cons of the synthesized MXene composite layers is worthwhile to consider in the future.

Optimization strategies of high-entropy alloys for electrocatalytic applications

High-entropy alloys (HEAs) are expected to become one of the most promising functional materials in the field of electrocatalysis due to their site-occupancy disorder and lattice order. The chemical complexity and component tunability make it possible for them to obtain a nearly continuous distribution of adsorption energy curve, which means that the optimal adsorption strength and maximum activity can be obtained by a multi-alloying strategy. In the last decade, a great deal of research has been performed on the synthesis, element selection and catalytic applications of HEAs. In this review, we focus on the analysis and summary of the advantages, design ideas and optimization strategies of HEAs in electrocatalysis. Combined with experiments and theories, the advantages of high activity and high stability of HEAs are explored in depth. According to the classification of catalytic reactions, how to design high-performance HEA catalysts is proposed. More importantly, efficient strategies for optimizing HEA catalysts are provided, including element regulation, defect regulation and strain engineering. Finally, we point out the challenges that HEAs will face in the future, and put forward some personal proposals. This work provides a deep understanding and important reference for electrocatalytic applications of HEAs.

Double-single-atom MoCu-embedded porous carbons boost the electrocatalytic N2 reduction reaction

NH3 is an essential ingredient of chemical, fertilizer, and energy storage products. Industrial nitrogen fixation consumes an enormous amount of energy, which is counter to the concept of carbon neutrality, hence eNRR ought to be implemented as a clean alternative. Herein, we propose a double-single-atom MoCu-embedded porous carbon material derived from uio-66 (MoCu@C) by plasma-enhanced chemical vapor deposition (PECVD) to boost eNRR capabilities, with an NH3 yield rate of 52.4 μg h-1 gcat.-1 and a faradaic efficiency (FE) of 27.4%. Advanced XANES shows that the Mo active site receives electrons from Cu, modifies the electronic structure of the Mo active site and enhances N2 adsorption activation. The invention of rational MoCu double-single-atom materials and the utilization of effective eNRR approaches furnish the necessary building blocks for the fundamental study and practical application of Mo-based materials.

Anchoring a Pt-based alloy on oxygen-vacancy-defected MXene nanosheets for efficient hydrogen evolution reaction and oxygen reduction reaction

Rational design and controllable synthesis of Pt-based materials with intimate interfacial contact open up the possibility for boosting the performance of the ORR (oxygen reduction reaction) and HER (hydrogen evolution reaction). However, it is still challenging to prevent the oxidation of Pt during the formation of alloys and to clarify the interfacial synergistic effects on the catalytic performance between Pt alloys and the dispersed substrate. Herein, the wet chemical stripping and intercalation methods were employed to synthesize a two-dimensional (2D) MXene with abundant defect sites, which can anchor Pt3Co/Pt3Ni nanoparticles and prevent the oxidation of Pt during the process of atomic rearrangement at high temperatures. The obtained Pt3Co/MXene and Pt3Ni/MXene displayed different phase compositions and alloying degrees on adjusting the annealing temperature. Electrochemical test results showed that the optimized HER and ORR electrocatalytic activities occurred at 700 °C. Compared with Pt3Ni/MXene-700, Pt3Co/MXene-700 exhibited an HER overpotential of 1.3 mV at a current density of 10 mA cm-2, and a Tafel slope of 27.11 mV dec-1 in 0.1 M HClO4 solution. Furthermore, Pt3Co/MXene-700 exhibited an ORR half-wave potential of 0.897 V, and a mass activity of 241.1 mA mg-1Pt in 0.1 M HClO4 solution. This can be attributed to the formation of intermetallic compounds in Pt3Co/MXene. The electronic structure analysis showed that the enhanced performance could be assigned to the electron-capturing capability of the MXene, less oxidation of Pt and synergistic interactions between the Pt alloy and the MXene substrate. These findings provide a new strategy for the synthesis of highly active HER/ORR catalysts and broaden the way for the design of MXene-based catalysts.

Recent progress in the development of advanced support materials for electrocatalysis

Electrocatalytic materials are pivotal for clean chemical production and energy conversion in devices like electrolyzers and fuel cells. These materials usually consist of metallic nanoparticles which serve as active reaction sites, and support materials which provide high surface area, conductivity and stability. When designing novel electrocatalytic composites, the focus is often on the metallic sites, however, the significance of the support should not be overlooked. Carbon materials, valued for their conductivity and large surface area, are commonly used as support in benchmark electrocatalysts. However, using alternative support materials instead of carbon can be beneficial in certain cases. In this minireview, we summarize recent advancements and key directions in developing novel supports for electrocatalysis, encompassing both carbon and non-carbon materials.

Rational Fabrication of Defect-Rich and Hierarchically Porous Fe-N-C Nanosheets as Highly Efficient Oxygen Reduction Electrocatalysts for Zinc-Air Battery

The rational design of morphology and structure for oxygen reduction reaction (ORR) catalysts still remains a critical challenge. Herein, we successfully construct defect-rich and hierarchically porous Fe-N-C nanosheets (Fe-N-CNSs), by taking advantage of metal-organic complexation and a mesoporous template. Benefiting from the advantages of high density of active sites, fast mass transfer channels, and sufficient reaction area, the optimal Fe-N-CNSs demonstrate satisfactory ORR activity with an excellent half-wave potential of up to 0.87 V, desirable durability, and robust methanol tolerance. Noteworthy, the Fe-N-CNSs based zinc-air battery shows significant performance with a peak power density of 128.20 mW cm^-2 and open circuit voltage of 1.53 V, which reveals that the Fe-N-CNSs catalysts present promising practical application prospects. Therefore, we believe that this research will provide guidance for the optimization of Fe-N-C materials.

Recent Advances and Perspectives of Lewis Acidic Etching Route: An Emerging Preparation Strategy for MXenes

Since the discovery in 2011, MXenes have become the rising star in the field of two-dimensional materials. Benefiting from the metallic-level conductivity, large and adjustable gallery spacing, low ion diffusion barrier, rich surface chemistry, superior mechanical strength, MXenes exhibit great application prospects in energy storage and conversion, sensors, optoelectronics, electromagnetic interference shielding and biomedicine. Nevertheless, two issues seriously deteriorate the further development of MXenes. One is the high experimental risk of common preparation methods such as HF etching, and the other is the difficulty in obtaining MXenes with controllable surface groups. Recently, Lewis acidic etching, as a brand-new preparation strategy for MXenes, has attracted intensive attention due to its high safety and the ability to endow MXenes with uniform terminations. However, a comprehensive review of Lewis acidic etching method has not been reported yet. Herein, we first introduce the Lewis acidic etching from the following four aspects: etching mechanism, terminations regulation, in-situ formed metals and delamination of multi-layered MXenes. Further, the applications of MXenes and MXene-based hybrids obtained by Lewis acidic etching route in energy storage and conversion, sensors and microwave absorption are carefully summarized. Finally, some challenges and opportunities of Lewis acidic etching strategy are also presented.

Strategies for Promoting Catalytic Performance of Ru-based Electrocatalysts towards Oxygen/Hydrogen Evolution Reaction

Ru-based materials hold great promise for substituting Pt as potential electrocatalysts toward water electrolysis. Significant progress is made in the fabrication of advanced Ru-based electrocatalysts, but an in-depth understanding of the engineering methods and induced effects is still in their early stage. Herein, we organize a review that focusing on the engineering strategies toward the substantial improvement in electrocatalytic OER and HER performance of Ru-based catalysts, including geometric structure, interface, phase, electronic structure, size, and multicomponent engineering. Subsequently, the induced enhancement in catalytic performance by these engineering strategies are also elucidated. Furthermore, some representative Ru-based electrocatalysts for the electrocatalytic HER and OER applications are also well presented. Finally, the challenges and prospects are also elaborated for the future synthesis of more effective Ru-based catalysts and boost their future application.

Recent Advances of Modified Ni (Co, Fe)-Based LDH 2D Materials for Water Splitting

Water splitting technology is an efficient approach to produce hydrogen (H₂) as an energy carrier, which can address the problems of environmental deterioration and energy shortage well, as well as establishment of a clean and sustainable hydrogen economy powered by renewable energy sources due to the green reaction of H₂ with O₂. The efficiency of H₂ production by water splitting technology is intimately related with the reactions on the electrode. Nowadays, the efficient electrocatalysts in water splitting reactions are the precious metal-based materials, i.e., Pt/C, RuO₂, and IrO₂. Ni (Co, Fe)-based layered double hydroxides (LDH) two-dimensional (2D) materials are the typical non-precious metal-based materials in water splitting with their advantages including low cost, excellent electrocatalytic performance, and simple preparation methods. They exhibit great potential for the substitution of precious metal-based materials. This review summarizes the recent progress of Ni (Co, Fe)-based LDH 2D materials for water splitting, and mainly focuses on discussing and analyzing the different strategies for modifying LDH materials towards high electrocatalytic performance. We also discuss recent achievements, including their electronic structure, electrocatalytic performance, catalytic center, preparation process, and catalytic mechanism. Furthermore, the characterization progress in revealing the electronic structure and catalytic mechanism of LDH is highlighted in this review. Finally, we put forward some future perspectives relating to design and explore advanced LDH catalysts in water splitting.

Nanolaminated Ternary Transition Metal Carbide (MAX Phase)-Derived Core-Shell Structure Electrocatalysts for Hydrogen Evolution and Oxygen Evolution Reactions in Alkaline Electrolytes

The development of abundant, cheap, and highly active catalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is important for hydrogen production. Nanolaminate ternary transition metal carbides (MAX phases) and their derived two-dimensional transition metal carbides (MXenes) have attracted considerable interest for electrocatalyst applications. Herein, four new MAX@MXene core-shell structures (Ta₂CoC@Ta₂CT_x, Ta₂NiC@Ta₂CT_x, Nb₂CoC@Nb₂CT_x, and Nb₂NiC@Nb₂CT_x), in which the core region is Co/Ni-MAX phases while the edge region is MXenes, have been prepared. Under alkaline electrolyte conditions, the Ta₂CoC@Ta₂CT_x core-shell structure showed an overpotential of 239 mV and excellent stability during the HER with MXenes as the active sites. For the OER, the Ta₂CoC@Ta₂CT_x core-shell structure showed an overpotential of 373 mV and a small Tafel plot (56 mV dec^-1), which maintained a bulk crystalline structure and generated Co-based oxyhydroxides that formed by surface reconstruction as active sites. Considering rich chemical compositions and structures of MAX phases, this work provides a new strategy for designing multifunctional electrocatalysts and also paves the way for further development of MAX phase-based materials for clean energy applications.

Functional two-dimensional MXenes as cancer theranostic agents

Recently, MXenes, as a kind of two-dimensional (2D) layered materials with exceptional performance, have become the research hotspots owing to their unique structural, electronic, and chemical properties. They have potential applications in electrochemical storage, photocatalysis, and biosensors. Furthermore, they have certain characteristics such as large surface area, favorable biocompatibility, and ideal mechanical properties, which can expand their applications in biomedical fields, especially in cancer therapy. To date, several researchers have explored the applications of MXenes in tumor elimination, which exhibited other fantastic properties of those 2D MXenes, such as efficient in vivo photothermal ablation, low phototoxicity, high biocompatibility, etc. In this review, the structures, properties, modifications, and preparation methods are introduced respectively. More importantly, the multifunctional platforms for cancer therapy based on MXenes nanosheets (NSs) are reviewed in detail, including single-modality and combined-modality cancer therapy. Finally, the prospects and challenges of MXenes are prospected and discussed. STATEMENT OF SIGNIFICANCE: In this review, the structures, properties, modifications, and preparation methods of MXenes nanomaterials are introduced, respectively. In addition, the preparation conditions and morphological characterizations of some common MXenes for therapeutic platforms are also summarized. More importantly, the practical applications of MXenes-based nanosheets are reviewed in detail, including drug delivery, biosensing, bioimaging, and multifunctional tumor therapy platforms. Finally, the future prospects and challenges of MXenes are prospected and discussed.

MXene Enhanced Photoactivity of Bi2O3/Bi2S3 Heterojunction with G-wire Superstructure for Photoelectrochemical Detection of TET1 Protein

Ten-eleven translocation 1 (TET1) protein has the potential to accelerate the oxygenation of 5-methylcytosine to 5-hydroxymethylcytosine (5hmC); then the -CH₂OH of 5hmC can further covalently react with -SH catalyzed by M.HhaI methyltransferase. A brand-new photoelectrochemical (PEC) detection technique for the TET1 protein was created in light of this. For this objective, the Bi₂O₃/Bi₂S₃ heterojunction was first prepared by a one-pot hydrothermal method and served for photosensitive materials. For further enhancing the photoactivity, Bi₂O₃/Bi₂S₃ was blended with MXene to form an energy band-matched structure, thus improving the migration kinetics of photogenerated carriers. For achieving a high sensitivity of detection, a DNA Walker incorporated with the nicking endonuclease (Nb.BbvCI enzyme)-assisted signal amplification strategy was presented to output exponential G-quadruplex fragments. Self-assembly of the free G-quadruplex sequence into a G-wire superstructure with the assistance of Mg²⁺ provided more loading sites for MB and amplified the PEC signal. The linear range of the biosensor was 0.1-10 μg/mL with a detection limit of 0.024 μg/mL (S/N = 3) for TET1 protein under optimal experimental conditions. The suitability of the proposed method was evaluated by inhibitor screening experiments and the influence of environmental degradation on the activity of TET1 protein.

Positively Charged Pt-Based Nanoreactor for Efficient and Stable Hydrogen Evolution

Positively charged Pt can work as the active center for hydrogen evolution reaction (HER) but the corresponding design of state-of-the-art electrocatalysts at high current densities has never been realized. Here the application of positively charged Pt in an effective Fe-PtNiPO nanoreactor for highly efficient and stable HER is demonstrated. Synchrotron radiation X-ray absorption spectroscopy confirms the formation of internal positively charged Pt and the in situ experiments reveal the quick charge transfer in the nanoreactor. Ni-based materials around Pt are used to tune the electronic structure and promote the water dissociation to form locally enriched H⁺ , while a porous Fe shell can both prevent the loss of active material and allow the efficient material transport. All the beneficial compositions work together to form an effective nanoreactor for HER. As a result, the Fe-PtNiPO nanoreactor shows a low overpotential of 19 mV to achieve 10 mA cm^-2 and exhibits a high mass activity of 10.93 A mg_Pt ^-1 (at 100 mV). Most importantly, it only needs an ultra-low overpotential of 193 mV to achieve a high current density of 1000 mA cm^-2 with an excellent stability over 300 h, which represents one of the best electrocatalysts for alkaline HER and might be used for large-scale industrial application in the future.

Review of Flexible Wearable Sensor Devices for Biomedical Application

With the development of cross-fertilisation in various disciplines, flexible wearable sensing technologies have emerged, bringing together many disciplines, such as biomedicine, materials science, control science, and communication technology. Over the past few years, the development of multiple types of flexible wearable devices that are widely used for the detection of human physiological signals has proven that flexible wearable devices have strong biocompatibility and a great potential for further development. These include electronic skin patches, soft robots, bio-batteries, and personalised medical devices. In this review, we present an updated overview of emerging flexible wearable sensor devices for biomedical applications and a comprehensive summary of the research progress and potential of flexible sensors. First, we describe the selection and fabrication of flexible materials and their excellent electrochemical properties. We evaluate the mechanisms by which these sensor devices work, and then we categorise and compare the unique advantages of a variety of sensor devices from the perspective of in vitro and in vivo sensing, as well as some exciting applications in the human body. Finally, we summarise the opportunities and challenges in the field of flexible wearable devices.

Development of Binder-Free Three-Dimensional Honeycomb-like Porous Ternary Layered Double Hydroxide-Embedded MXene Sheets for Bi-Functional Overall Water Splitting Reactions

In this study, a honeycomb-like porous-structured nickel-iron-cobalt layered double hydroxide/Ti₃C₂T_x (NiFeCo-LDH@MXene) composite was successfully fabricated on a three-dimensional nickel foam using a simple hydrothermal approach. Owing to their distinguishable characteristics, the fabricated honeycomb porous-structured NiFeCo-LDH@MXene composites exhibited outstanding bifunctional electrocatalytic activity for pair hydrogen and oxygen evolution reactions in alkaline medium. The developed NiFeCo-LDH@MXene electrocatalyst required low overpotentials of 130 and 34 mV to attain a current density of 10 mA cm^-2 for OER and HER, respectively. Furthermore, an assembled NiFeCo-LDH@MXene‖NiFeCo-LDH@MXene device exhibited a cell voltage of 1.41 V for overall water splitting with a robust firmness for over 24 h to reach 10 mA cm^-2 current density, signifying outstanding performance for water splitting reactions. These results demonstrated the promising potential of the designed 3D porous NiFeCo-LDH@MXene sheets as outstanding candidates to replace future green energy conversion devices.

LDH-assisted growth of FeCo bimetal-MOF nanorods for electrocatalytic oxygen evolution

Metal–organic frameworks (MOFs) have emerged as alternative OER catalysts due to their easy regulation, such as in situ self-reconstruction from MOFs to metal hydroxides through alkaline hydrolysis. Herein, we demonstrate a facile strategy for the in situ transformation of FeCo layered double hydroxide (FeCo-LDH) nanosheets into 1D spindle-shaped FeCo-MOFs for efficient OER. An optimized electrode of FeCo-MOF on a nickel foam (NF) was achieved by adjusting the addition of organic ligands and the reaction time in the hydrothermal reaction. Based on the unique 1D nanostructure and the cation regulation, the obtained FeCo-MOF exhibits a good catalytic performance toward the OER with a low overpotential of 475 mV at 100 mA cm⁻², a small Tafel slope of 121.8 mV dec⁻¹, and high long-term durability. This study provides a facile strategy for preparing bimetal-MOFs as catalysts for efficient OER.

We demonstrate a strategy for transforming FeCo-LDH nanosheets into 1D FeCo-MOF nanorods in situ for efficient OER. This strategy solves the problem that MOFs are difficult to grow on conductive substrates under traditional synthesis conditions.