Very high expander processing of maize on animal performance, digestibility and product quality of finishing pigs and broilers

Influence of Expander Conditioning Prior to Pelleting on Pellet Quality, Broiler Digestibility and Performance at Constant Amino Acids Composition while Decreasing AMEN

Physical pellet quality and AMEN concentration are strongly related to each other in broiler feeding. A study was conducted to evaluate the relationship between dietary AMEN concentration and feed processing on pellet quality, nutrient digestibility, broiler performance, serum markers, and yield of commercial cuts. Six diets were formulated. The first diet had the recommended AMEN concentration, each further diet was calculated with 40 kcal/kg less, from 0 to −200 kcal/kg, resulting in six levels for each feed phase: starter (1−14 d), grower (15−28 d), and finisher (29−35 d). These diets were processed with and without expander conditioning prior to pelleting, using an average corn particle size of 1.6 mm, ground with a roller mill. A total of 1008 one-day-old male Ross 308 broiler chickens were placed in a 6 × 2 (6 energy levels and 2 conditionings) factorial trial with six boxes as replications, with three in each broiler performance trial period. Excreta were collected 2 days before the end of each feed phase for apparent total tract digestibility measurement. On day 36, four broilers from each replication (pen) were weighed and then euthanized for blood collection, following which the gastrointestinal organs were weighed, and the ileal and gizzard contents were collected. On day 37, all remaining broilers were slaughtered after fasting to measure commercial cuts and abdominal fat. The results show that the pellet durability index (PDI) was most affected by energy reducing and expander conditioning prior to pelleting, and it was better when diets had energy reduced by 40 to 200 kcal/kg (p > 0.001), as when expander conditioning was used. Digestibility of nutrients was slightly affected by treatments, as was the broiler performance; however, feed efficiency was improved in broiler-fed diets without AMEN reduction and when an expander was used, with p = 0.050 and p = 0.031, respectively. No effects were observed on the weight of gastrointestinal tract organs and serum markers, except for liver (p = 0.037) and α-amylase (p = 0.047). The lowest liver weight and lowest serum protein, cholesterol, triglyceride, gamma-glutamyl, and lipase concentrations were obtained when diets were formulated without energy reduction (Ross-0). There was no effect on commercial cuts relative to live weight at slaughter. The energy reduction was well reflected in the proportion of abdominal fat, which decreased when AMEN was reduced (p = 0.001). The present study shows it is possible to use diets with up to 200 kcal/kg reduction in AMEN without losses in performance, and the use of expander conditioning prior to pelleting promotes higher pellet quality and broiler feed efficiency.

Towards Large Particle Size in Compound Feed: Using Expander Conditioning Prior to Pelleting Improves Pellet Quality and Growth Performance of Broilers

During the processing of compound feed for broilers, several changes occur that affect the physical and probably the nutritional properties of pellets, influencing animal performance. The effects of mill type, particle size (PS) and expander conditioning prior to pelleting (E + P) were combined to generate pellets. A 2 × 3 × 2 factorial arrangement was designed with two mill types (a hammer mill (HM) or roller mill (RM)), three PSs (0.8, 1.2 or 1.6 mm) and two E + Ps (with or without expander processing prior to pelleting), with six replications of 12 unsexed Ross 308 broilers each. All the processing lines reduced the PS from mash to finished pellets via secondary grinding, by 2.35 times on average. However, RM grinding required less electric power (p < 0.001). The intended PS (0.8, 1.2 or 1.6 mm) did not affect this energy consumption. E + P and the PS interacted for the pellet durability index (PDI) (p = 0.006). The worst PDI in the pellets was observed when a PS of 1.6 mm without E + P was used. Only E + P positively affected starch (p < 0.001) and amino acids’ ileal apparent digestibility (p < 0.01). Organic matter (OM) (p = 0.02) and fat (p < 0.001) digestibility, as well as AMEN (p = 0.005) content, were influenced by the PS (main effect), whereas E + P and mill type interacted with these values (p < 0.005). Lower OM digestibility and AMEN content were observed when RM without E + P was used (p = 0.001). The feed conversion ratio (FCR) was enhanced and feed intake (FI) was improved with E + P. The combination of the RM mill, a 1.6 mm mean PS, and E + P improved FCR (three-way interaction, p = 0.019)), showing that for a higher PS, E + P is necessary for animal performance. Carcass yield was, on average, 80.1%. No effects on commercial cuts (breast, legs and wings) were observed. In contrast, abdominal fat was affected by mill type * PS (p = 0.012) and E + P * PS (p = 0.048) in a two-way interaction. The highest abdominal fat indicated an imbalance in the amino acid (AA)-to-AMEN ratio. Coarse PS promoted heavier gizzards (p = 0.02) but E + P tended to reduce them (p = 0.057). The processing steps improved pellet quality and feed efficiency associated with RM, coarse PS and E + P, highlighting the positive effects of E + P on abdominal fat and AMEN content, which should be adjusted to AA or reduced at formulation. However, these results are for an experimental processing plant and may not necessarily apply to larger plants, so the use of these data and methods should be considered as guidelines for replication at production sites.

Effect of the use of flaked maize in diets with reduced metabolic energy on performance, egg quality, and serum parameters in layer quails

<b>The research was conducted to determine the effects of substituting raw maize with flaked maize in diets containing different levels of metabolic energy on the performance, egg quality, and serum parameters of layer quails. In the experiment, 120 female quails at ten weeks of age were randomly allocated to six treatment groups with four replicates, each consisting of five quails. The quails were fed six diets, with two forms of maize (raw or flaked) and three metabolic energy levels (2750, 2825 or 2900 (control) kcal/kg) during a ten-week trial. Compared with the control group, reducing the metabolic energy level of the diet to 2750 kcal/kg negatively affected egg production (P < 0,01), egg mass (P < 0,01), feed conversion ratio (P < 0,01), and serum cholesterol concentration (P < 0,05). Eggshell thickness decreased significantly in the group receiving 2750 kcal/kg metabolic energy in the diet, and the yolk b* value increased significantly (P < 0,01). The use of flaked maize in the diets significantly increased egg production (P < 0,05), egg mass (P < 0,05), eggshell thickness (P < 0,05), and yolk L* value (P < 0,01) and significantly decreased the feed conversion ratio (P < 0,05) and b* value of the yolk (P < 0,05). Although the effects of the interactions of the metabolic energy levels and forms of maize on the egg yolk b* value were significant (P < 0,01), this effect was not significant for the other parameters. The results indicate that layer quails can be fed diets containing 2825 kcal/kg metabolic energy and that replacement of raw maize with flaked maize in the diet positively affects performance and egg quality.

Physicochemical properties to support fibre characterization in monogastric animal nutrition

BACKGROUND

The aim of the study was to rank conventionally used fibre rich feeds for their physicochemical properties and detect possible correlation between analytical fibre determinations. A total of 22 samples were analysed for proximate fibre values, soluble dietary fibre (SDF), insoluble dietary fibre (IDF), crude protein (CP) and crude ash (CA). Physicochemical properties were determined in vitro by hydration capacity (HC) [water holding capacity (WHC), water binding capacity (WBC), swelling property (SwP)] and buffering capacity [linear buffering rate (LBR)].

RESULTS

Fibre content and physicochemical properties varied markedly between the samples. HC was highest for beet pulp and lowest for rice and millet bran. Buffering capacity expressed minimum values for lignocelluloses and maximum values for rape seed hulls. The correlation of methods was positively between WBC, WHC and SwP (r ≤ 0.89; P ≤ 0.003) but not significant for HC and buffering capacity. SwP negatively correlated with crude fibre (CF), neutral detergent fibre (aNDF_OM ) and IDF (r ≤ -0.48; P ≤ 0.05). WBC and SwP positively correlated with SDF (r ≤ 0.63; P ≤ 0.04). LBR was negatively correlated with CF, aNDF_OM , IDF and total dietary fibre (r ≤ -0.55; P ≤ 0.02), but positively with CP (r = 0.53; P = 0.01).

CONCLUSION

The determination of physicochemical properties is applicable to rank fibre rich feeds, some correlations between fibre analytical measurements and physicochemical properties were detected. © 2019 Society of Chemical Industry.