Method for detection of specific nucleic acids by recombinant protein with fluorescent resonance energy transfer

Development and optimization of heavy metal lead biosensors in biomedical and environmental applications

The detrimental impact of the heavy metal lead (Pb) on human health has been studied for years. The fact that Pb impairs human body has been established from countless painful and sad historical events. Nowadays, World Health Organization and many developmental countries have established regulations concerning the use of Pb. Measuring the blood lead level (BLL) is so far the only way to officially evaluate the degree of Pb exposure, but the so-called safety value (10 μg/dL in adults and 5 μg/dL in children) seems unreliable to represent the security checkpoint for children through daily intake of drinking water or physical contact with a lower contaminated level of Pb contents. In general, unsolved mysteries about the Pb toxicological mechanisms still remain. In this review article, we report on the methods to prevent Pb poison for further Pb toxicological research. We establish high-sensitivity Pb monitoring, and also report on the use of fluorescent biosensors such as genetically-encoded fluorescence resonance energy transfer-based biosensors built for various large demands such as the detection of severe acute respiratory syndrome coronavirus 2. We also contribute to the development and optimization of the FRET-based Pb biosensors. Our well-performed version of Met-lead 1.44 M1 has achieved a limit of detection of 10 nM (2 ppb; 0.2 μg/dL) and almost 5-fold in dynamic range (DR) supported for the real practical applications-that is, the in-cell Pb sensing device for blood and blood-related samples, and the Pb environmental detections in vitro. The perspective of our powerful Pb biosensor incorporated with a highly sensitive bio-chip of the portable device for quick Pb measurements will be addressed for further manipulation.

Detecting Protein-Ligand Interaction from Integrated Transient Induced Molecular Electronic Signal (i-TIMES)

Quantitative information about protein-ligand interactions is central to drug discovery. To obtain the quintessential reaction dissociation constant, ideally measurements of reactions should be performed without perturbations by molecular labeling or immobilization. The technique of transient induced molecular electrical signal (TIMES) has provided a promising technique to meet such requirements, and its performance in a microfluidic environment further offers the potential for high throughput and reduced consumption of reagents. In this work, we further the development by using integrated TIMES signal (i-TIMES) to greatly enhance the accuracy and reproducibility of the measurement. While the transient response may be of interest, the integrated signal directly measures the total amount of surface charge density resulted from molecules near the surface of electrode. The signals enable quantitative characterization of protein-ligand interactions. We have demonstrated the feasibility of i-TIMES technique using different biomolecules including lysozyme, N,N',N″-triacetylchitotriose (TriNAG), aptamer, p-aminobenzamidine (pABA), bovine pancreatic ribonuclease A (RNaseA), and uridine-3'-phosphate (3'UMP). The results show i-TIMES is a simple and accurate technique that can bring tremendous value to drug discovery and research of intermolecular interactions.

Fluorescent and luminescent fusion proteins for analyses of amyloid beta peptide aggregation

The amyloid beta (Aβ) peptide is regarded as a causative agent of Alzheimer's disease. In this study, fluorescent and luminescent fusion proteins were constructed to analyze Aβ aggregation. A system was developed to monitor changes in luminescence that provides information about Aβ aggregation. In the presence of monomeric Aβ, the fusion protein exhibits higher luminescence intensity, and the luminescence intensity is diminished after aggregation of the fusion protein and Aβ. In contrast, the fluorescence is sustained in the presence of Aβ. In the absence of Aβ, the fusion protein self-aggregates, and its luminescence and fluorescence are quenched, thus decreasing the background fluorescence and enhancing the detection of Aβ inside and outside the cells. The ratio of the luminescence intensity to the fluorescence intensity would allow the aggregation degrees of Aβ to be distinguished. This study would be a promising method for analyzing the aggregation state of a particular amyloid protein/peptide (monomer, oligomer, or fibril), as well as the distribution of the amyloid protein/peptide within and at the cell surface, by using a single fusion protein. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.

Determination of the binding constant of specific interactions and binding target concentration simultaneously using a general chemiluminescence method

The measurement of the binding constant of specific interactions and concentration of a target is of considerable importance in clinical diagnosis, therapy, bioassays and drug design.

A general chemiluminescence strategy for measuring aptamer-target binding and target concentration

Although much effort has been made for studies on aptamer-target interactions due to promising applications of aptamers in biomedical and analytical fields, measurement of the aptamer-target binding constant and binding site still remains challenging. Herein, we report a sensitive label-free chemiluminescence (CL) strategy to determine the target concentration and, more importantly, to measure the target-aptamer binding constant and binding site. This approach is suitable for multiple types of targets, including small molecules, peptides, and proteins that can enhance the CL initiated by N-(aminobutyl)-N-ethylisoluminol functionalized gold colloids, making the present method a general platform to investigate aptamer-target interactions. This approach can achieve extremely high sensitivity with nanogram samples for measuring the target-aptamer binding constant. And the measurement could be rapidly performed using a simple and low-cost CL system. It provides an effective tool for studying the binding of biologically important molecules to nucleic acids and the selection of aptamers. Besides, we have also discovered that the 14-mer aptamer fragment itself split from the ATP-binding aptamer could selectively capture ATP. The binding constant, site, and conformation between ATP and the 14-mer aptamer fragment were obtained using such a novel CL strategy and molecular dynamic simulation.

Application of FRET probes in the analysis of neuronal plasticity

Breakthroughs in imaging techniques and optical probes in recent years have revolutionized the field of life sciences in ways that traditional methods could never match. The spatial and temporal regulation of molecular events can now be studied with great precision. There have been several key discoveries that have made this possible. Since green fluorescent protein (GFP) was cloned in 1992, it has become the dominant tracer of proteins in living cells. Then the evolution of color variants of GFP opened the door to the application of Förster resonance energy transfer (FRET), which is now widely recognized as a powerful tool to study complicated signal transduction events and interactions between molecules. Employment of fluorescent lifetime imaging microscopy (FLIM) allows the precise detection of FRET in small subcellular structures such as dendritic spines. In this review, we provide an overview of the basic and practical aspects of FRET imaging and discuss how different FRET probes have revealed insights into the molecular mechanisms of synaptic plasticity and enabled visualization of neuronal network activity both in vitro and in vivo.

Molecular beacons of xeno-nucleic acid for detecting nucleic acid

Molecular beacons (MBs) of DNA and RNA have aroused increasing interest because they allow a continuous readout, excellent spatial and temporal resolution to observe in real time. This kind of dual-labeled oligonucleotide probes can differentiate between bound and unbound DNA/RNA in homogenous hybridization with a high signal-to-background ratio in living cells. This review briefly summarizes the different unnatural sugar backbones of oligonucleotides combined with fluorophores that have been employed to sense DNA/RNA. With different probes, we epitomize the fundamental understanding of driving forces and these recognition processes. Moreover, we will introduce a few novel and attractive emerging applications and discuss their advantages and disadvantages. We also highlight several perspective probes in the application of cancer therapeutics.

Simultaneous detection of ATP and GTP by covalently linked fluorescent ribonucleopeptide sensors

A noncovalent RNA complex embedding an aptamer function and a fluorophore-labeled peptide affords a fluorescent ribonucleopeptide (RNP) framework for constructing fluorescent sensors. By taking an advantage of the noncovalent properties of the RNP complex, the ligand-binding and fluorescence characteristics of the fluorescent RNP can be independently tuned by taking advantage of the nature of the RNA and peptide subunits, respectively. Fluorescent sensors tailored for given measurement conditions, such as a detection wavelength and a detection concentration range for a ligand of interest can be easily identified by screening of fluorescent RNP libraries. The noncovalent configuration of a RNP becomes a disadvantage when the sensor is to be utilized at very low concentrations or when multiple sensors are applied to the same solution. Here, we report a strategy to convert a fluorescent RNP sensor in the noncovalent configuration into a covalently linked stable fluorescent RNP sensor. This covalently linked fluorescent RNP sensor enabled ligand detection at a low sensor concentration, even in cell extracts. Furthermore, application of both ATP and GTP sensors enabled simultaneous detection of ATP and GTP by monitoring each wavelength corresponding to the respective sensor. Importantly, when a fluorescein-modified ATP sensor and a pyrene-modified GTP sensor were co-incubated in the same solution, the ATP sensor responded at 535 nm only to changes in the concentration of ATP, whereas the GTP sensor detected GTP at 390 nm without any effect on the ATP sensor. Finally, simultaneous monitoring by these sensors enabled real-time measurement of adenosine deaminase enzyme reactions.

Probing nucleic acid interactions and pre-mRNA splicing by Förster Resonance Energy Transfer (FRET) microscopy

Förster resonance energy transfer (FRET) microscopy is a powerful technique routinely used to monitor interactions between biomolecules. Here, we focus on the techniques that are used for investigating the structure and interactions of nucleic acids (NAs). We present a brief overview of the most commonly used FRET microscopy techniques, their advantages and drawbacks. We list experimental approaches recently used for either in vitro or in vivo studies. Next, we summarize how FRET contributed to the understanding of pre-mRNA splicing and spliceosome assembly.

Aptamer-based fluorescent biosensors

Selected from random pools of DNA or RNA molecules through systematic evolution of ligands by exponential enrichment (SELEX), aptamers can bind to target molecules with high affinity and specificity, which makes them ideal recognition elements in the development of biosensors. To date, aptamer-based biosensors have used a wide variety of detection techniques, which are briefly summarized in this article. The focus of this review is on the development of aptamer-based fluorescent biosensors, with emphasis on their design as well as properties such as sensitivity and specificity. These biosensors can be broadly divided into two categories: those using fluorescently-labeled aptamers and others that employ label-free aptamers. Within each category, they can be further divided into "signal-on" and "signal-off" sensors. A number of these aptamer-based fluorescent biosensors have shown promising results in biological samples such as urine and serum, suggesting their potential applications in biomedical research and disease diagnostics.

Direct detection of RNAs in living cells using peptide-inserted Renilla luciferase

In this study, non-engineered RNAs were detected in living cells using bioluminescence. Two types of probe were utilized: a peptide inserted RLuc (PI-RLuc) probe and a split-RNA probe. Incorporation of the PI-RLuc and split-RNA probes enabled the direct detection of RNA introduced into living cells.

Methods for measuring aptamer-protein equilibria: a review

Aptamers are single stranded DNA or RNA molecules that have been selected using in vitro techniques to bind target molecules with high affinity and selectivity, rivaling antibodies in many ways. In order to use aptamers in research and clinical applications, a thorough understanding of aptamer-target binding is necessary. In this article, we review methods for assessing aptamer-protein binding using separation based techniques such as dialysis, ultrafiltration, gel and capillary electrophoresis, and HPLC; as well as mixture based techniques such as fluorescence intensity and anisotropy, UV-vis absorption and circular dichroism, surface plasmon resonance, and isothermal titration calorimetry. For each method the principle, range of application and important features, such as sample consumption, experimental time and complexity, are summarized and compared.

Detection of bioactive small molecules by fluorescent resonance energy transfer (FRET) in RNA-protein conjugates

Bioactive small molecules such as metabolites and drugs play important roles in regulating biological functions. A technique for visualizing such small molecules is very useful to understand their molecular mechanisms. In this study, an RNA-protein conjugate, which consists of an RRE-RNA sensor protein (EYFP-Rev-ECFP) and an altered RRE-RNA, was constructed to detect bioactive small molecules by fluorescent resonance energy transfer (FRET). We designed a theophylline-aptamer-inserted RRE-RNA (Theo-RRE) to detect theophylline as a model target molecule. Theo-RRE formed an RNA-protein conjugate with EYFP-Rev-ECFP in the presence of theophylline. As a result, theophylline was specifically detected down to 10 microM by the FRET increase in distinction from theophylline analogue, caffeine, in cell lysates.

RNA detection using peptide-inserted Renilla luciferase

A novel complementation system with short peptide-inserted-Renilla luciferase (PI-Rluc) and split-RNA probes was constructed for noninvasive RNA detection. The RNA binding peptides HIV-1 Rev and BIV Tat were used as inserted peptides. They display induced fit conformational changes upon binding to specific RNAs and trigger complementation or discomplementation of Rluc. Split-RNA probes were designed to reform the peptide binding site upon hybridization with arbitrarily selected target RNA. This set of recombinant protein and split-RNA probes enabled a high degree of sensitivity in RNA detection. In this study, we show that the Rluc system is comparable to Fluc, but that its detection limit for arbitrarily selected RNA (at least 100 pM) exceeds that of Fluc by approximately two orders of magnitude.

Visualization of growth signal transduction cascades in living cells with genetically encoded probes based on Förster resonance energy transfer

Fluorescence probes based on the principle of Förster resonance energy transfer (FRET) have shed new light on our understanding of signal transduction cascades. Among them, unimolecular FRET probes containing fluorescence proteins are rapidly increasing in number because these genetically encoded probes can be easily loaded into living cells and allow simple acquisition of FRET images. We have developed probes for small GTPases, tyrosine kinases, serine-threonine kinases and phosphoinositides. Images obtained with these probes have revealed that membrane protrusions such as nascent lamellipodia or neurites provide an active signalling platform in the growth factor-stimulated cells.

Context-dependent fluorescence detection of a phosphorylated tyrosine residue by a ribonucleopeptide

Tools for selective recognition and sensing of specific phosphorylated tyrosine residues on the protein surface are essential for understanding signal transduction cascades in the cell. A stable complex of RNA and peptide, a ribonucleopeptide (RNP), provides effective approaches to tailor RNP receptors and fluorescent RNP sensors for small molecules. In vitro selection of an RNA-derived pool of RNP afforded RNP receptors specific for a phosphotyrosine residue within a defined amino-acid sequence Gly-Tyr-Ser-Arg. The RNP receptor for the specific phosphotyrosine residue was successfully converted to a fluorescent RNP sensor for sequence-specific recognition of a phosphorylated tyrosine by screening a pool of fluorescent phosphotyrosine-binding RNPs generated by a combination of the RNA subunits of phosphotyrosine-binding RNPs and various fluorophore-modified peptide subunits. The phosphotyrosine-binding RNP receptor and fluorescent RNP sensor constructed from the RNP receptor not only discriminated phosphotyrosine against tyrosine, phosphoserine, or phosphothreonine, but also showed specific recognition of amino acid residues surrounding the phosphotyrosine residue. A fluorescent RNP sensor for one of the tyrosine phosphorylation sites of p100 coactivator showed a binding affinity to the target site ~95-fold higher than the other tyrosine phosphorylation site. The fluorescent RNP sensor has an ability to function as a specific fluorescent sensor for the phosphorylated tyrosine residue within a defined amino-acid sequence in HeLa cell extracts.

Direct detection of RNA transcription by FRET imaging using fluorescent protein probe

We have constructed a reporter system for intracellular direct detection of RNA transcription that consists of two biomolecular components. The first part is a GFP-based recombinant protein probe (YRG0C-11ad) containing the RNA-binding Rev-peptide between ECFP and EYFP. The second component is RRE-RNA, which specifically binds to the Rev-peptide. Cells stably expressing YRG0C-11ad were identified by an increased FRET signal after direct transfection or intracellular transcription of RRE-RNA. In addition, the signal increase is more noticeable if tandemly repeated RRE-RNA is used as the reporter. Untranslatable non-coding RNAs are regarded as regulators of cellular gene expression, but they are difficult to study using indirect reporter systems that are dependent on translational products. Direct detection of reporter RNA would be a useful method for the detection of intracellular promoter activity during transcription of untranslatable RNAs.

Interaction of a self-assembling peptide with oligonucleotides: complexation and aggregation

Molecular interaction of a self-assembling peptide, EAK16-II, to single- and double-stranded oligodeoxynucleotides (ODNs) was investigated under various solution conditions. The molecular events leading to EAK-ODN complexation and further aggregation were elucidated using a series of spectroscopic and microscopic methods. Despite the ability to self-assemble, EAK molecules bind to ODN molecules first upon mixing, resulting in EAK-ODN complexes. The complexes further associate to form EAK-ODN aggregates. A method based on UV-Vis absorption and centrifugation was developed to quantify the fraction of ODNs in the aggregates. The results were used to construct binding isotherms via a binding density function analysis. To compare the effects of different pH values and nucleotide types, the modified noncooperative McGhee and von Hippel model was used to extract binding parameters from the binding isotherms. The binding constant of EAK to ODNs was higher at pH 4 than at pH 7, and no binding was observed at pH 11, indicating that the interaction involved is primarily electrostatic in nature. EAK bound more strongly to single-stranded ODNs. The EAK-ODN aggregates were further visualized using atomic force microscopy; their size distribution as a function of EAK concentration was monitored by dynamic light scattering. The timescale for the EAK-ODN aggregation was on the order of minutes by fluorescence anisotropy and steady-state light scattering experiments. Fluorescence quenching experiments demonstrated that the ODNs in the aggregates were less accessible to the solvent, demonstrating a potential of oligonucleotide encapsulation by the self-assembling peptide.

Protein biosensors based on the principle of fluorescence resonance energy transfer for monitoring cellular dynamics

Genetically-coded, fluorescence resonance energy transfer (FRET) biosensors are widely used to study molecular events from single cells to whole organisms. They are unique among biosensors because of their spontaneous fluorescence and targeting specificity to both organelles and tissues. In this review, we discuss the theoretical basis of FRET with a focus on key parameters responsible for designing FRET biosensors that have the highest sensitivity. Next, we discuss recent applications that are grouped into four common biosensor design patterns--intermolecular FRET, intramolecular FRET, FRET from substrate cleavage and FRET using multiple colour fluorescent proteins. Lastly, we discuss recent progress in creating fluorescent proteins suitable for FRET purposes. Together these advances in the development of FRET biosensors are beginning to unravel the interconnected and intricate signalling processes as they are occurring in living cells and organisms.

Profluorescent protein fragments for fast bimolecular fluorescence complementation in vitro

Here, we present a protocol for isolating the large N-terminal fragment of enhanced green fluorescent protein (EGFP) with a preformed chromophore. By itself, the chromophore-containing EGFP fragment exhibits very weak fluorescence, but it rapidly becomes brightly fluorescent upon complementation with the corresponding small, C-terminal EGFP fragment. Each EGFP fragment is cloned and overexpressed in E. coli as a fusion with self-splitting intein. After solubilizing and refolding these fusions from inclusion bodies, both EGFP fragments are cleaved from intein and purified using chitin columns. When these EGFP fragments are linked with the two complementary oligonucleotides and combined in equimolar amounts, fluorescence develops within a few minutes. The isolation of profluorescent protein fragments from recombinant E. coli cells requires approximately 3 d, and their conjugation to oligonucleotides requires 1-4 h.