Single Carbon Fiber Decorated with RuO2 Nanorods as a Highly Electrocatalytic Sensing Element

Electrochemical sensing fibers for wearable health monitoring devices

Real-time monitoring of health conditions is an emerging strong issue in health care, internet information, and other strongly evolving areas. Wearable electronics are versatile platforms for non-invasive sensing. Among a variety of wearable device principles, fiber electronics represent cutting-edge development of flexible electronics. Enabled by electrochemical sensing, fiber electronics have found a wide range of applications, providing new opportunities for real-time monitoring of health conditions by daily wearing, and electrochemical fiber sensors as explored in the present report are a promising emerging field. In consideration of the key challenges and corresponding solutions for electrochemical sensing fibers, we offer here a timely and comprehensive review. We discuss the principles and advantages of electrochemical sensing fibers and fabrics. Our review also highlights the importance of electrochemical sensing fibers in the fabrication of "smart" fabric designs, focusing on strategies to address key issues in fiber-based electrochemical sensors, and we provide an overview of smart clothing systems and their cutting-edge applications in therapeutic care. Our report offers a comprehensive overview of current developments in electrochemical sensing fibers to researchers in the fields of wearables, flexible electronics, and electrochemical sensing, stimulating forthcoming development of next-generation "smart" fabrics-based electrochemical sensing.

Construction of Zn-doped RuO2 nanowires for efficient and stable water oxidation in acidic media

Oxygen evolution reaction catalysts capable of working efficiently in acidic media are highly demanded for the commercialization of proton exchange membrane water electrolysis. Herein, we report a Zn-doped RuO₂ nanowire array electrocatalyst with outstanding catalytic performance for the oxygen evolution reaction under acidic conditions. Overpotentials as low as 173, 304, and 373 mV are achieved at 10, 500, and 1000 mA cm^-2, respectively, with robust stability reaching to 1000 h at 10 mA cm^-2. Experimental and theoretical investigations establish a clear synergistic effect of Zn dopants and oxygen vacancies on regulating the binding configurations of oxygenated adsorbates on the active centers, which then enables an alternative Ru-Zn dual-site oxide path of the reaction. Due to the change of reaction pathways, the energy barrier of rate-determining step is reduced, and the over-oxidation of Ru active sites is alleviated. As a result, the catalytic activity and stability are significantly enhanced.

Self-Terminated Electroless Deposition of Surfactant-Free and Monodispersed Pt Nanoparticles on Carbon Fiber Microelectrodes for Sensitive Detection of H2O2 Released from Living Cells

We report a self-terminated electroless deposition method to prepare surfactant-free and monodispersed Pt nanoparticle (NP)-modified carbon fiber microelectrodes (Pt NP/CFEs) for electrochemical detection of hydrogen peroxide (H₂O₂) released from living cells. The surfactant-free and monodispersed Pt NPs with a uniform size of 65 nm are spontaneously deposited on a CFE surface by immersing an exposed carbon fiber (CF) of CFE in the PtCl₄^2- solution, in which an exposed CF can be used as the reducing agent and stabilizer. A self-terminated electroless deposition method is demonstrated, in which the density and size of Pt NPs on a CFE surface do not increase when the reaction time increases from 20 to 60 min. The self-terminated electroless deposition process not only can effectively avoid any manual electrode modification and thus largely minimize person-to-person and electrode-to-electrode deviations but also can avoid the use of any extra reductant or surfactant in the fabrication process. Therefore, Pt NPs/CFEs, with good reproducibility and sensitivity, not only exhibit high electrocatalytic activity toward the oxidation of H₂O₂ but also maintain the spatial resolution of CFEs. Moreover, Pt NPs/CFEs can detect H₂O₂ with a wide linear range of 0.5-80 μM and a low detection limit of 0.17 μM and then can be successfully applied in the monitoring of H₂O₂ released from RAW 264.7 cells. The self-terminated electroless deposition method can also be extended to selectively prepare other metal NP-modified CFEs, such as Au NPs/CFEs or Ag NPs/CFEs, by choosing the metal ions with higher reduction potential as precursors. This work provides a simple, straightforward, and general method for the preparation of small, surfactant-free, and monodispersed metal NP-modified CFEs with high sensitivity, reproducibility, and spatial resolution.

Highly sensitive and selective nanostructured microbiosensors for glucose and lactate simultaneous measurements in blood serum and in vivo in brain tissue

Highly sensitive and selective nanostructured lactate and glucose microbiosensors for their in vivo simultaneous determination in rat brain were developed based on carbon fiber microelectrodes (CFM) modified with nanoporous gold (NPG) using the Dynamic Hydrogen Bubble Template (DHBT) method. Electrodeposition of platinum nanoparticles (PtNP) onto the NPG film enhances the sensitivity and the electrocatalytic properties towards H₂O₂ detection. The nanostructured microelectrode platform was modified by glucose oxidase (GOx) and lactate oxidase (LOx) enzyme immobilization. High selective measurements were achieved by covering with a perm-selective layer of electropolymerized m-phenylenediamine, deposition of a Nafion® film and by using a null sensor. The morphological characteristics and electroanalytical performance of the microbiosensors were assessed, by scanning electron microscopy and electrochemical techniques, respectively. The PtNP/NPG/CFM shows a high sensitivity to H₂O₂ (5.96 A M^-1 cm^-2) at 0.36 V vs. Ag/AgCl, with a linear range from 0.2 to 200 μM, and an LOD of 10 nM. The microbiosensors were applied to the simultaneous determination of lactate and glucose in blood serum samples. Moreover, the basal extracellular concentrations of lactate and glucose were measured in vivo in four different rat brain structures. These results support the potential of the microbiosensor to be used as a valuable tool to investigate brain neurochemicals in vivo.

Unidirectional growth of single crystalline β-Na0.33V2O5and α-V2O5nanowires driven by controlling the pH of aqueous solution and their electrochemical performances for Na-ion batteries

Single crystalline β-Na_0.33V₂O₅and α-V₂O₅nanowires were prepared with pH controlled precursors.

Growth of One-Dimensional RuO2 Nanowires on g-Carbon Nitride: An Active and Stable Bifunctional Electrocatalyst for Hydrogen and Oxygen Evolution Reactions at All pH Values

Development of highly efficient and durable bifunctional electrocatalyst for hydrogen and oxygen evolution reactions (HER and OER) is essential for efficient solar fuel generation. The commercial RuO₂ or RuO₂-based catalysts are highly active toward OER, but their poor stability under different operating conditions is the main obstacle for their commercialization. Herein, we report growth of one-dimensional highly crystalline RuO₂ nanowires on carbon nitride (1D-RuO₂-CN_x) for their applications in HER and OER at all pH values. The 1D-RuO₂-CN_x, as an OER catalyst, exhibits a low onset overpotential of ∼200 mV in both acidic and basic media, whereas Tafel slopes are 52 and 56 mV/dec in acidic and basic media, respectively. This catalyst requires a low overpotential of 250 and 260 mV to drive the current density of 10 mA cm^-2 in acidic and basic media, respectively. The mass activity of 1D-RuO₂-CN_x catalyst is 352 mA mg^-1, which is ∼14 times higher than that of commercial RuO₂. Most importantly, the 1D-RuO₂-CN_x catalyst has remarkably higher stability compared to commercial RuO₂. This catalyst also exhibits superior HER activity with a current density of 10 mAcm^-2 at ∼93 and 95 mV in acidic and basic media. The HER Tafel slopes of this catalyst are 40 mV/dec in acidic condition and 70 mV/dec in basic condition. The HER activity of this catalyst is slightly lower than Pt/C in acidic media, whereas in basic media it is comparable or even better than that of Pt/C at higher overpotentials. The HER stability of this catalyst is also better than that of Pt/C in all pH solutions. This superior catalytic activity of 1D-RuO₂-CN_x composite can be attributed to catalyst-support interaction, enhanced mass and electron transport, one-dimensional morphology, and highly crystalline rutile RuO₂ structure.

Construction of titanium dioxide nanorod/graphite microfiber hybrid electrodes for a high performance electrochemical glucose biosensor

The demand for a highly sensitive and selective glucose biosensor which can be used for implantable or on-time monitoring is constantly increasing. In this work, TiO2 nanorods were synthesized in situ on the surface of graphite microfibers to yield TiO2 nanorod/graphite microfiber hybrid electrodes. The TiO2 nanorods not only retain the high activity of the immobilized glucose molecule, but also promote the direct electron transfer process on the electrode surface. As a working electrode in an electrochemical glucose biosensor in a flowing system, the microfiber hybrid electrodes exhibit high sensitivity, selectivity and stability. Due to its simplicity, low cost, high stability, and unique morphology, the TiO2 nanorod/graphite microfiber hybrid electrode is expected to be an excellent candidate for an implantable biosensor or for in situ flow monitoring.

Hierarchical nanostructured noble metal/metal oxide/graphene-coated carbon fiber: in situ electrochemical synthesis and use as microelectrode for real-time molecular detection of cancer cells

We report the design and fabrication of a new type of nanohybrid microelectrode based on a hierarchical nanostructured Au/MnO2/graphene-modified carbon fiber (CF) via in situ electrochemical synthesis, which leads to better structural integration of different building blocks into the CF microelectrode. Our finding demonstrates that wrapping CF with graphene nanosheets has dramatically increased the surface area and electrical conductivity of the CF microelectrode. The subsequent template-free electrodeposition of MnO2 on graphene-wrapped CF gives rise to a porous nanonest architecture built up from twisted and intersectant MnO2 nanowires, which serves as an ideal substrate for the direct growth of Au nanoparticles. Owing to the structural merit and synergy effect between different components, the hierarchical nanostructured noble metal/metal oxide/graphene-coated CF demonstrates dramatically enhanced electrocatalytic activity. When used for nonenzymatic H2O2 sensing, the resultant modified microelectrode exhibits acceptable sensitivity, reproducibility, stability, and selectivity, which enable it to be used for real-time tracking H2O2 secretion in human cervical cancer cells. Graphical abstract A schematic illustration of preparation of hierarchical Au/MnO2/ERGO/CF nanohybrid electrode for real-time molecular detection of cancer cells.

Time-Resolved Detection and Analysis of Single Nanoparticle Electrocatalytic Impacts

There is considerable interest in understanding the interaction and activity of single entities, such as (electro)catalytic nanoparticles (NPs), with (electrode) surfaces. Through the use of a high bandwidth, high signal/noise measurement system, NP impacts on an electrode surface are detected and analyzed in unprecedented detail, revealing considerable new mechanistic information on the process. Taking the electrocatalytic oxidation of H2O2 at ruthenium oxide (RuOx) NPs as an example, the rise time of current-time transients for NP impacts is consistent with a hydrodynamic trapping model for the arrival of a NP with a distance-dependent NP diffusion-coefficient. NP release from the electrode appears to be aided by propulsion from the electrocatalytic reaction at the NP. High-frequency NP impacts, orders of magnitude larger than can be accounted for by a single pass diffusive flux of NPs, are observed that indicate the repetitive trapping and release of an individual NP that has not been previously recognized. The experiments and models described could readily be applied to other systems and serve as a powerful platform for detailed analysis of NP impacts.

Highly branched RuO2 nanoneedles on electrospun TiO2 nanofibers as an efficient electrocatalytic platform

Highly single-crystalline ruthenium dioxide (RuO2) nanoneedles were successfully grown on polycrystalline electrospun titanium dioxide (TiO2) nanofibers for the first time by a combination of thermal annealing and electrospinning from RuO2 and TiO2 precursors. Single-crystalline RuO2 nanoneedles with relatively small dimensions and a high density on electrospun TiO2 nanofibers are the key feature. The general electrochemical activities of RuO2 nanoneedles-TiO2 nanofibers and Ru(OH)3-TiO2 nanofibers toward the reduction of [Fe(CN)6](3-) were carefully examined by cyclic voltammetry carried out at various scan rates; the results indicated favorable charge-transfer kinetics of [Fe(CN)6](3-) reduction via a diffusion-controlled process. Additionally, a test of the analytical performance of the RuO2 nanoneedles-TiO2 nanofibers for the detection of a biologically important molecule, hydrogen peroxide (H2O2), indicated a high sensitivity (390.1 ± 14.9 μA mM(-1) cm(-2) for H2O2 oxidation and 53.8 ± 1.07 μA mM(-1) cm(-2) for the reduction), a low detection limit (1 μM), and a wide linear range (1-1000 μM), indicating H2O2 detection performance better than or comparable to that of other sensing systems.

Three-dimensional graphene hydrogel supported ultrafine RuO2 nanoparticles for supercapacitor electrodes

A 3D porous framework of RuO₂/RGOH shows excellent supercapacitive performances, high specific capacitance, good rate capability and a long cycling life.

Facile preparation of graphene nanoribbon/cobalt coordination polymer nanohybrid for non-enzymatic H2O2 sensing by dual transduction: electrochemical and fluorescence

A novel graphene nanoribbon (GNR)/cobalt coordination polymer (MCPs) composite (MCPs@GNR) is prepared by in situ reduction of graphene oxide nanoribbon (GONR) with simultaneous growth of MCPs nanoparticles on its surface demonstrating high H₂O₂ sensing.

RuO2–ReO3 composite nanofibers for efficient electrocatalytic responses

The electrochemical responses of RuO₂–ReO₃ electrospun composite nanofibers were remarkably enhanced depending on the amount of ReO₃ increased.

Highly efficient electrochemical responses on single crystalline ruthenium-vanadium mixed metal oxide nanowires

Highly efficient single crystalline ruthenium-vanadium mixed metal oxide (Ru1-xVxO2, 0≤x≤1) nanowires were prepared on a SiO2 substrate and a commercial Au microelectrode for the first time through a vapor-phase transport process by adjusting the mixing ratios of RuO2 and VO2 precursors. Single crystalline Ru1-xVxO2 nanowires show homogeneous solid-solution characteristics as well as the distinct feature of having remarkably narrow dimensional distributions. The electrochemical observations of a Ru1-xVxO2 (x=0.28 and 0.66)-decorated Au microelectrode using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) demonstrate favorable charge-transfer kinetics of [Fe(CN)6]3-/4- and Ru(NH3)6(3+/2+) couples compared to that of a bare Au microelectrode. The catalytic activity of Ru1-xVxO2 for oxygen and H2O2 reduction at neutral pH increases as the fraction of vanadium increases within our experimental conditions, which might be useful in the area of biofuel cells and biosensors.