Cell-to-cell scanning in capillary electrophoresis

Development of a microfluidic cell-based biosensor integrating a millisecond chemical pulse generator

The use of cell-based biosensors is usually limited by agonist-induced desensitization of cell-surface receptors. In this work, a microfluidic cell-based biosensor (μCBB) was developed for the detection of ATP in liquid environments. It consists of a millisecond chemical pulse generator for sample introduction in a pulsatile manner and a single NIH-3T3 cell expressing endogenous P2Y receptors as the sensing element. ATP solutions were used to simulate input signals for investigating the μCBB. By controlling negative pressures on two outlets of a cross-shaped microfluidic chip, pulses of ATP solutions were generated based on hydrodynamic gated injection. With ATP pulses of 100 ms every 50s, the amplitude of the resulting calcium spikes maintained at a similar level, suggesting that the receptor desensitization was minimized. Consequently, the developed μCBB could be used for detecting pulsatile samples with extended use times. The sensitivity of the μCBB for detecting ATP was further determined and the cellular responses to millisecond ATP pulses were investigated in comparison to long-term stimulations.

Localized sampling, electrophoresis, and biosensor analysis of Xenopus laevis cytoplasm for subcellular biochemical assays

The Xenopus oocyte is a widely used model cell for studies of signal transduction mechanisms. Advances in microanalytical methods have made it feasible to perform rapid, localized collection of cytoplasm from individual Xenopus oocytes. Analytes contained in the cytoplasmic sample are separated by electrophoresis in a capillary and simultaneously transferred to a detection region. The development of bioengineered cells as sensitive detectors of intracellular components made quantitative measurements of native signaling molecules within the electrophoresed sample possible. Local determination of the second messenger inositol 1,4,5-trisphosphate is described to illustrate the methods for the sampling, electrophoresis, detection, and quantification of signaling molecules in single oocytes.

Probing affinity via capillary electrophoresis: advances in 2003–2004

This review addresses recent advances in capillary electrophoresis of biological-based molecular interaction from a broader perspective, based on applications reported during the period 2003-2004. These capillary electrophoresis-based studies of molecular interactions include affinity capillary electrophoresis, electrokinetic chromatography, and free zone electrophoresis. The review is written as a general synopsis of applications and does not cover the theory or protocol involved in the implementation of the analyses.

Single-cell immunosensors for protein detection

A single-cell detector is described that combines the natural signal amplification of whole-cell biosensors with the flexibility and specificity of immunological recognition. An immune cell that expresses receptors for the constant region of immunoglobulin G (IgG) is loaded with a Ca(2+)-indicating dye and with antibodies directed against the protein of interest. Introduction of a multivalent protein antigen causes cross-linking of the receptors, which results in a detectable increase in the concentration of cytosolic Ca(2+). Some immune cell lines respond to stimulation with oscillations in their cytosolic Ca(2+) levels that complicate their use as detectors. The human monocytic cell line U-937, when treated with the cytokine interferon-gamma, produces a large, short-lived Ca(2+) signal in response to cross-linking of its high-affinity IgG receptors. U-937 was therefore chosen for development as an immunity-based detector. Human and rabbit antibodies are found to effectively stimulate the cell, causing a prompt and transient response. The cell is able to respond to repeated stimulation, though the response diminishes during rapid stimulation. Ovalbumin can be detected in micromolar concentrations. Possible fundamental constraints on the size of a detectable analyte are discussed.

Capillary electrophoresis coupled to biosensor detection

The present review highlights some modern aspects of biosensor revelation, a detection method which has already found a large number of applications in healthcare, food industry and environmental analysis. First, the concept of bio-recognition, which is at the heart of biosensor technology, is discussed, with emphasis on host-guest-like recognition mechanisms. This detection device has been successfully coupled, in its first applications, to chromatographic columns, which allow a high resolution of complex mixtures of analytes prior to interaction with the biosensing unit. The properties of the transducing elements, which should generate a signal (e.g., electrochemical, thermal, acoustic, optical) of proper intensity and of relative fast rise, are additionally evaluated and discussed. The review then focuses on potential applications of biosensing units in capillary electrophoresis (CE) devices. CE appears to be an excellent separation methodology to be coupled to biosensor detection, since it is based on miniaturized electrophoretic chambers, fast analysis times, complete automation in sample handling and data treatment and requires extremely small sample volumes. Although only a few applications of CE-based biosensors have been described up to the present, it is anticipated that this hyphenated technique could have a considerable expansion in the coming years.

Biosensors in chemical separations

Identification of biomolecules in complex biological mixtures represents a major challenge in biomedical, environmental, and chemical research today. Chemical separations with traditional detection schemes such as absorption, fluorescence, refractive index, conductivity, and electrochemistry have been the standards for definitive identifications of many compounds. In many instances, however, the complexity of the biomixture exceeds the resolution capability of chemical separations. Biosensors based on molecular recognition can dramatically improve the selectivity of and provide biologically relevant information about the components. This review describes how coupling chemical separations with online biosensors solves challenging problems in sample analysis by identifying components that would not normally be detectable by either technique alone. This review also presents examples and principles of combining chemical separations with biosensor detection that uses living systems, whole cells, membrane receptors, enzymes, and immunosensors.

Patch clamp detection in capillary electrophoresis

We describe a capillary electrophoresis-patch clamp (CE-PC) analysis of biomolecules that activate ligand-gated ion channels. CE-PC offers a powerful means for identifying receptor ligands based on the combination of the characteristic receptor responses they evoke and their differential electrophoretic migration rates. Corner frequencies, membrane reversal potentials, and mean and unitary single-channel receptor responses were calculated from currents recorded with patch clamp detection. This information was then combined with the electrophoretic mobility of the receptor ligand, which is proportional to the charge-to-frictional-drag ratio of that species. We applied CE-PC to separate and detect the endogenous receptor agonists gamma-aminobutyrate and L-glutamate and the synthetic glutamate receptor agonists N-methyl-D-aspartate and kainic acid. We present dose-response data for electrophoretically separated kainic acid and discuss its implications for making the CE-PC detection system quantitative.