Recessed Ag/AgCl Microelectrode-Supported Lipid Bilayer for Nanopore Sensing

Impact of nanotechnology on progress of flow methods in chemical analysis: A review

In evolution of instrumentation for analytical chemistry as crucial technological breakthroughs should be considered a common introduction of electronics with all its progress in integration, and then microprocessors which was followed by a widespread computerization. It is seems that a similar role can be attributed to the introduction of various elements of modern nanotechnology, observed with a fast progress since beginning of this century. It concerns all areas of the applications of analytical chemistry, including also progress in flow analysis, which are being developed since the middle of 20th century. Obviously, it should not be omitted the developed earlier and analytically applied planar structures like lipid membranes or self-assembled monolayers They had essential impact prior to discoveries of numerous extraordinary nanoparticles such as fullerenes, carbon nanotubes and graphene, or nanocrystalline semiconductors (quantum dots). Mostly, due to catalytic effects, significantly developed surface and the possibility of easy functionalization, their application in various stages of flow analytical procedures can significantly improve them. The application of new nanomaterials may be used for the development of new detection methods for flow analytical systems in macro-flow setups as well as in microfluidics and lateral flow immunoassay tests. It is also advantageous that quick flow conditions of measurements may be helpful in preventing unfavorable agglomeration of nanoparticles. A vast literature published already on this subject (e.g. almost 1000 papers about carbon nanotubes and flow-injection analytical systems) implies that for this reviews it was necessary to make an arbitrary selection of reported examples of this trend, focused mainly on achievements reported in the recent decade.

Nanopore discrimination and sensitive plasma detection of multiple natriuretic peptides: The representative biomarker of human heart failure

Natriuretic peptides can relieve cardiovascular stress and closely related to heart failure. Besides, these peptides also have preferable interactions of binding to cellular protein receptors, and subsequently mediate various physiology actions. Hence, detection of these circulating biomarkers could be evaluated as a predictor ("Gold standard") for rapid, early diagnosis and risk stratification in heart failure. Herein, we proposed a measurement to discriminate multiple natriuretic peptides via the peptide-protein nanopore interaction. The nanopore single-molecular kinetics revealed that the strength of peptide-protein interactions was in the order of ANP > CNP > BNP, which was demonstrated by the simulated peptide structures using SWISS-MODEL. More importantly, the peptide-protein interaction analyzing also allowed us to measure the peptide linear analogs and structure damage in peptide by single-chemical bond breakup. Finally, we presented an ultra-sensitive detection of plasma natriuretic peptide using asymmetric electrolyte assay, obtaining a detection limit of ∼770 fM for BNP. At approximately, it is 1597 times lower than that of using symmetric assay (∼1.23 nM), 8 times lower than normal human level (∼6 pM), and 13 times lower than the diagnostic values (∼10.09 pM) complied in the guideline of European Society of Cardiology. That said, the designed nanopore sensor is benefit for natriuretic peptides measurement at single molecule level and demonstrates its potential for heart failure diagnosis.

Maintaining Single-Channel Recordings on a Silver Nanoneedle through Probe Design and Feedback Tip Positioning Control

Ion channel proteins showed great promise in the field of nanopore sensing and molecular flux imaging applications due to the atomic-level precision of the pore size and a high signal-to-noise ratio. More specifically, ion channel probes, where the protein channels are integrated at the end of a solid probe, can achieve highly localized detection. Metal probe materials such as gold and silver have been developed to support lipid bilayers and enable the use of smaller probes, or nanoneedles, compared to more traditional glass micropipette ion channel probes. Silver probes are preferable because they support sustained DC stable channel current due to the AgCl layer formed around the tip during the fabrication process. However, one of the current challenges in ion channel measurements is maintaining a single-channel recording. Multiple protein insertions complicate data analysis and destabilize the bilayer. Herein, we combine the promising probe material (Ag/AgCl) with an approach based on current feedback-controlled tip positioning to maintain long-term single-channel recordings for up to 3 h. We develop a hybrid positioning control system, where the channel current is used as feedback to control the vertical movement of the silver tip and, subsequently, control the number of protein channels inserted in the lipid membrane. Our findings reveal that the area of the lipid bilayer decreases with moving the silver tip up (i.e., decreasing the displacement in the z-direction). By reducing the bilayer area around the fine silver tip, we minimize the probability of multiple insertions and remove unwanted proteins. In addition, we characterize the effect of lipid properties such as fluidity on the lipid membrane area. We believe that the use of silver nanoneedles, which enables DC stable channel current, coupled with the developed tip displacement mechanism will offer more opportunities to employ these probes for chemical imaging and mapping different surfaces.

Challenges and opportunities in achieving the full potential of droplet interface bilayers

Model membranes can be used to elucidate the intricacies of the chemical processes that occur in cell membranes, but the perfectly biomimetic, yet bespoke, model membrane has yet to be built. Droplet interface bilayers are a new type of model membrane able to mimic some features of real cell membranes better than traditional models, such as liposomes and black lipid membranes. In this Perspective, we discuss recent work in the field that is starting to showcase the potential of these model membranes to enable the quantification of membrane processes, such as the behaviour of protein transporters and the prediction of in vivo drug movement, and their use as scaffolds for electrophysiological measurements. We also highlight the challenges that remain to enable droplet interface bilayers to achieve their full potential as artificial cells, and as biological analytical platforms to quantify molecular transport.

Microcavity volume control on a tip of Ag/AgCl electrodes for stable channel current measurements of biological nanopores

A probe-type channel current measurement system with a planer bilayer lipid membrane (pBLM) at the tip of a probe provided several advantages for pBLM formation and channel current measurements. The procedure for preparing pBLMs was simple (i.e., the probe was submerged into a bath solution layered by an oil/lipid mixture and buffer solution). The probe systems offered local detection of analytes by nanopore sensing. Nevertheless, the current decay caused by changing the ion concentration in the electrolyte held on the tip of the probes influenced the sensing accuracy. Here we applied a cavity microelectrode (CME) technique to fabricate pBLM probes with larger electrolyte volume on the tip. We fabricated silver CMEs with different cavity volumes and measured channel currents of biological nanopores. Furthermore, we evaluated the channel current decay as a function of cavity volume by analyzing the step signals of α-hemolysin nanopores. Consequently, the channel current decay was extended by increasing the cavity volume, indicating that the volume of the electrolyte solution was important for channel current measurements of nanopores. We concluded that the pBLM system using CMEs is useful for channel current measurements of biological nanopores. Additionally, the fundamental evaluation of the relationship between the electrolyte volume and channel current decay will be helpful in the design of pBLM systems made by microfabrication and microfluidic techniques.

Metal-organic framework-based micropipette is a metal ion responsive nanochannel after adsorbing H2S

Glass micropipettes are easy to fabricate, have excellent flexibility and stable properties. HKUST-1 and MIL-68(In) are in situ grown in the tip of a micropipette to construct porous nanochannels. After absorbing H2S, the MIL-68(In)-based nanochannel shows effective metal ion responsiveness for Hg2+-detection.

Silver Nanoneedle Probes Enable Sustained DC Current, Single-Channel Resistive Pulse Nanopore Sensing

Resistive pulse sensing using ion channel proteins (biological nanopores) has been evolving as a single-molecule approach to detect small biomolecules owing to atomically precise pore size reproducibility, high signal-to-noise ratio, and molecular selectivity. The incorporation of biological nanopores in sensing platforms requires a stable lipid membrane that can be formed by a variety of methods such as the painting method and droplet-based techniques. However, these methods are limited by the fragility of the unsupported bilayer or the need for specific microdevices. Electrode-supported bilayers, in which a metal electrode is used as a support structure, have been recently developed using a fine gold nanoneedle. We previously described the utility of the gold nanoneedle-supported ion channel probe to detect small molecules with high spatial resolution; however, it exhibited a channel current decay over time, which affected the binding frequency of the target molecule to the protein pore as well. Here, we introduce a silver nanoneedle probe to support the lipid bilayer formation and ion channel measurements. The silver nanoneedle mitigates the current decay observed on gold electrodes and produces stable DC channel currents. Our findings propose the formation of a AgCl layer creating a nonpolarizable electrode. The new nanoneedle is successfully applied for single-molecule detection of sulfonated β-cyclodextrin (S₇βCD) using αHL as a test bed protein. We believe that this new silver nanoneedle platform has great potential given the relative ease of lipid bilayer formation and stable open channel currents.

Characterizing the Structure and Interactions of Model Lipid Membranes Using Electrophysiology

The cell membrane is a protective barrier whose configuration determines the exchange both between intracellular and extracellular regions and within the cell itself. Consequently, characterizing membrane properties and interactions is essential for advancements in topics such as limiting nanoparticle cytotoxicity. Characterization is often accomplished by recreating model membranes that approximate the structure of cellular membranes in a controlled environment, formed using self-assembly principles. The selected method for membrane creation influences the properties of the membrane assembly, including their response to electric fields used for characterizing transmembrane exchanges. When these self-assembled model membranes are combined with electrophysiology, it is possible to exploit their non-physiological mechanics to enable additional measurements of membrane interactions and phenomena. This review describes several common model membranes including liposomes, pore-spanning membranes, solid supported membranes, and emulsion-based membranes, emphasizing their varying structure due to the selected mode of production. Next, electrophysiology techniques that exploit these structures are discussed, including conductance measurements, electrowetting and electrocompression analysis, and electroimpedance spectroscopy. The focus of this review is linking each membrane assembly technique to the properties of the resulting membrane, discussing how these properties enable alternative electrophysiological approaches to measuring membrane characteristics and interactions.

Recent Advances in Liposome-Based Molecular Robots

A molecular robot is a microorganism-imitating micro robot that is designed from the molecular level and constructed by bottom-up approaches. As with conventional robots, molecular robots consist of three essential robotics elements: control of intelligent systems, sensors, and actuators, all integrated into a single micro compartment. Due to recent developments in microfluidic technologies, DNA nanotechnologies, synthetic biology, and molecular engineering, these individual parts have been developed, with the final picture beginning to come together. In this review, we describe recent developments of these sensors, actuators, and intelligence systems that can be applied to liposome-based molecular robots. First, we explain liposome generation for the compartments of molecular robots. Next, we discuss the emergence of robotics functions by using and functionalizing liposomal membranes. Then, we discuss actuators and intelligence via the encapsulation of chemicals into liposomes. Finally, the future vision and the challenges of molecular robots are described.