Solvent and Flow Rate Effects on the Observed Compositional Profiles and the Relative Intensities of Radical and Protonated Species in Atmospheric Pressure Photoionization Mass Spectrometry

Harmonization of FT-ICR-MS Instruments for Interoperable Multi-Laboratory Comprehensive Compositional Profiling

Given the long hardware lifespan, fixed installation, and comparatively high investment required to procure them, Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) instruments tend to have a long operational life. The field is constantly evolving with rapidly advancing instrumental developments, and FT-ICR research groups work with a range of instrument designs from different generations. Consequently, compositional spectra comparability between instruments is a critical concern in FT-ICR-MS, particularly due to the variability introduced by commonly used direct infusion methods. This study demonstrates interlaboratory comparability of FT-ICR-MS molecular profiles using a 12 T solariX with an Infinity Cell and a 7 T scimaX with a ParaCell, with closely matched sample introduction and ion guide systems. Using analytically challenging pet food samples, we achieved similar instrument performance metrics, including resolving power, mass error, feature count, signal-to-noise ratios, and m/z distribution. The improved field homogeneity and sensitivity of the ParaCell reduced ICR cell space-charge interferences, making specialized calibration methods beyond linear calibration obsolete. We observed up to 78% overlap in annotated signals of the spectra increasing to 95%, when higher-intensity features are considered. Relative abundances showed great similarity, despite sample-dependent fluctuations (median coefficient of variation 23.4% to 49.2% and 15.5% to 29.5%, respectively). Unsupervised multivariate analysis (PCA) revealed consistent sample profiles with no systematic bias. Our study demonstrates that with careful instrument adjustment, molecular profile comparability can be achieved, ensuring the continued relevance of extensive databases and large chemical data sets acquired in long-term and collaborative projects measured on different instrumentation.

Ion Source Complementarity for Characterization of Complex Organic Mixtures Using Fourier Transform Mass Spectrometry: A Review

Complex organic mixtures are found in many areas of research, such as energy, environment, health, planetology, and cultural heritage, to name but a few. However, due to their complex chemical composition, which holds an extensive potential of information at the molecular level, their molecular characterization is challenging. In mass spectrometry, the ionization step is the key step, as it determines which species will be detected. This review presents an overview of the main ionization sources employed to characterize these kinds of samples in Fourier transform mass spectrometry (FT-MS), namely electrospray (ESI), atmospheric pressure photoionization (APPI), atmospheric pressure chemical ionization (APCI), atmospheric pressure laser ionization (APLI), and (matrix-assisted) laser desorption ionization ((MA)LDI), and their complementarity in the characterization of complex organic mixtures. First, the ionization techniques are examined in the common direct introduction (DI) usage. Second, these approaches are discussed in the context of coupling chromatographic techniques such as gas chromatography, liquid chromatography, and supercritical fluid chromatography.

Sewage and Organic Pollution Compounds in Nairobi River Urban Sediments Characterized by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR-MS)

Nairobi River sediments from locations adjacent to the Kawangware and Kiambio slums were analyzed via Fourier transform ion cyclotron resonance mass spectrometry with atmospheric pressure photoionization (APPI-FT-ICR-MS). The data from these ultrahigh resolution, untargeted measurements provided new insights into the impacts of local anthropogenic activity, which included likely benzo- and dibenzothiophene pollution with a suspected petrogenic origin, and prominent surfactant-like compositions. Other features in the data included highly abundant tetra-oxygenated compounds, and oxygenated nitrogen compounds with sphingolipid interpretations. Most notably, several hydrocarbon and oxygenated compound classes in the sediment data featured intensity patterns consistent with steroid molecular formulas, including those associated with sewage contamination investigatory work. In support of this interpretation, standards of cholesterol, β-sitosterol, stigmasterol, coprostanol, cholestanol, and 5α-sitostanol were analyzed via APPI, to explore steroid ionization behavior. Generally, these analytes produced radical molecular ions ([M]•+), and water-loss pseudo molecular ion species ([M-H2O]•+ and [M+H-H2O]+), among various other less intense contributions. The absence of pseudo molecular protonated species ([M+H]+) was notable for these compounds, because these are often assumed to form with APPI. The standard measurements demonstrated how steroids can create the observed intensity patterns in FT-ICR-MS data, and hence these patterns have the potential to indicate sewage contamination in the analysis of other complex environmental samples. The steroid interpretation for the Kawangware and Kiambio data was further verified by subjecting the steroid standard radical molecular ions to collision-induced dissociation and comparing the detected fragments to those for the corresponding isolated ions from a Kawangware sediment sample.

Tracking the history of polycyclic aromatic compounds in London through a River Thames sediment core and ultrahigh resolution mass spectrometry

Polycyclic aromatic compounds (PACs), including polycyclic aromatic hydrocarbons (PAHs) and heteroatom-containing analogues, constitute an important environmental contaminant class. For decades, limited numbers of priority PAHs have been routinely targeted in pollution investigations, however, there is growing awareness for the potential occurrence of thousands of PACs in the environment. In this study, untargeted Fourier transform ion cyclotron resonance mass spectrometry was used for the molecular characterisation of PACs in a sediment core from Chiswick Ait, in the River Thames, London, UK. Using complex mixture analysis approaches, including aromaticity index calculations, the number of molecular PAC components was determined for eight core depths, extending back to the 1930s. A maximum of 1676 molecular compositions representing PACs was detected at the depth corresponding to the 1950s, and a decline in PAC numbers was observed up the core. A case linking the PACs to London's coal consumption history is presented, alongside other possible sources, with some data features indicating pyrogenic origins. The overall core profile trend in PAC components, including compounds with oxygen, sulfur, nitrogen, and chlorine atoms, is shown to broadly correspond to the 16 priority PAH concentration profile trend previously determined for this core. These findings have implications for other industry-impacted environments.

Direct sulfur-containing compound speciation in crude oils and high-boiling fractions by APCI (+) FT-ICR mass spectrometry

In this study, we focus on advancing the methodology for detecting sulfur-containing compounds (SCCs) in crude oils and their derivatives. These compounds are critical for geochemical analysis, crude oil evaluation, and overcoming production and refining challenges. Although various analytical techniques exist, the precision and resolution power of Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR MS) stand out. However, the current methods for characterizing SCCs in petroleum products often lack standardization and tend to be complex and time-consuming. Our research introduces the use of Atmospheric Pressure Chemical Ionization (APCI) as an efficient alternative. We employed a mixture of toluene and methanol (1 : 1 ratio) for APCI, which demonstrated superior performance in sulfur speciation compared to mixtures of toluene and acetonitrile. Our specified method showed high repeatability, with coefficients of variation reported between 5% and 14%. This method effectively covers a wide range of double bond equivalents (DBEs) from 1 to 25 and various carbon numbers, demonstrating notable repeatability and reproducibility. Compared to results from ESI post-S-methylation and Atmospheric Pressure Photoionization (APPI), APCI offers a more comprehensive analysis of sulfur compounds, presenting a broad spectrum of molecular formulae and extending across a vast range of carbon numbers and DBEs. Here, we demonstrate that APCI is a robust and efficient method for direct and extensive sulfur speciation in crude oil and its high-boiling fractions, marking a significant advancement over existing techniques. This methodological improvement opens new pathways for more accurate and efficient sulfur compound analysis in petroleum products.