Wearable Electronic Finger for Date Rape Drugs Screening: From "Do-It-Yourself" Fabrication to Self-Testing

Second Skin as Self-Protection Against γ-Hydroxybutyrate

γ-Hydroxybutyrate (GHB), a date-rape drug, causes certain symptoms, such as amnesia, confusion, ataxia, and unconsciousness, when dissolved in beverages and consumed by a victim. Commonly, assailants use GHB in secret for the crime of drug-facilitated sexual assault because it is tasteless, odorless, and colorless when dissolved in beverages. Generally, GHB detection methods are difficult to use promptly and secretly in situ and in real life because of the necessary detection equipment and low selectivity. To overcome this problem, we have developed a fast, simple, and easy-to-use second skin platform as a confidential self-protection platform that can detect GHB in situ or in real life without equipment. The second skin platform for naked-eye detection of GHB is fabricated with poly(vinyl alcohol) (PVA), polyurethane (PU), and polyacrylonitrile (PAN) included in the chemical receptor 2-(3-bromo-4-hydroxystyryl)-3-ethylbenzothiazol-3-ium iodide (BHEI). PAN conjugated with BHEI nanofibers (PB NFs) has various characteristics, such as ease of use, high sensitivity, and fast color change. PB NFs rapidly detected GHB at 0.01 mg/mL. Furthermore, the second-skin platform attached to the fingertip and wrist detected both 1 and 0.1 mg/mL GHB in solution within 50 s. The color changes caused by the interaction of GHB and the second skin platform cannot be stopped due to strong chemical reactions. In addition, a second skin platform can be secretly utilized in real life because it can recognize fingerprints and object temperatures. Therefore, the second skin platform can be used to aid daily life and prevent drug-facilitated sexual assault crime when attached to the skin because it can be exposed anytime and anywhere.

Distance-based detection of paracetamol in microfluidic paper-based analytical devices for forensic application

Whisky adulteration is a prevalent practice driven by the high cost of these beverages. Counterfeiters commonly dilute whisky with less expensive alcoholic beverages, water, food additives, drugs or pharmaceuticals. Paracetamol (PAR), an analgesic drug that mitigates hangovers and headaches, is commonly used to adulterate whisky. Currently, the primary method for quantifying PAR levels is high-performance liquid chromatography, but this technique is both time consuming and usually generates more residues. In this context, the utilization of miniaturized and portable analytical devices becomes imperative for conducting point-of-care/need analyses. These devices offer several advantages, including portability, user-friendliness, low cost, and minimal material wastage. This study proposes the selective distance-based PAR quantification on whisky samples using a paper-based microfluidic analytical device (μPAD). Colorimetric detection on paper-based platforms offers great benefits such as affordability, portability, and the ability to detect PAR without complicated instrumentation. The optimal detection conditions were achieved by introducing 5 μL of a mixture containing 7.5 mmol L-1 of Fe(III) and K3[Fe(CN)6] into the detection zone, along with 12 μL of whisky samples into the sample zone. The method exhibited linear behavior within the concentration range from 15 to 120 mg L-1, with a determination coefficient of 0.998. PAR was quantified in adulterated samples. The results obtained with the paper-based devices were compared with a referenced method, and no significant differences were observed at a confidence level of 95%. The μPAD allowed to determine ca. 1 drop of pharmaceutical medicine PAR of 200 mg mL-1 in 1 L of solution, demonstrating excellent sensitivity. This method offers cost-effective and rapid analysis, reducing the consumption of samples, reagents, and wastes. Consequently, it could be considered a viable and portable alternative for analyzing beverages at criminal scenes, customs, and police operations, thereby enhancing the field of forensics.

3D-printed electrochemical glucose device with integrated Fe(II)-MOF nanozyme

Estimation of glucose (GLU) levels in the human organism is very important in the diagnosis and monitoring of diabetes. Scientific advances in nanomaterials have led to the construction of new generations of enzymatic-free GLU sensors. In this work, an innovative 3D-printed device modified with a water-stable and non-toxic metal-organic framework of iron (Fe(II)-MOF), which serves as a nanozyme, has been developed for the voltammetric determination of GLU in artificial sweat. In contrast to existing MOF-based GLU sensors which exhibit electrocatalytic activity for the oxidation of GLU in alkaline media, the nanozyme Fe(II)-MOF/3D-printed device can operate in the acidic epidermal sweat environment. The enzymatic-free GLU sensor is composed of a 3-electrode 3D-printed device with the MOF nanozyme immobilized on the surface of the working electrode. GLU sensing is conducted by differential pulse voltammetry without interference from other co-existing metabolites in artificial sweat. The response is based on the oxidation of glucose to gluconolactone, induced by the redox activity of the Fe-centers of the MOF. GLU gives rise to an easily detectable and well-defined voltammetric peak at about - 1.2 V and the limit of detection is 17.6 μmol L-1. The synergy of a nanozyme with 3D printing technology results in an advanced, sensitive, and low-cost sensor, paving the way for on-skin applications.

Investigating the electrochemical profile of methamphetamine to enable fast on-site detection in forensic analysis

Methamphetamine (MA) is a synthetic psychoactive drug which is consumed both licitly and illicitly. In some countries it is prescribed for attention-deficit and hyperactivity disorder, and short-term treatment of obesity. More often though, it is abused for its psychostimulant properties. Unfortunately, the spread and abuse of this synthetic drug have increased globally, being reported as the most widely consumed synthetic psychoactive drug in the world in 2019. Attempting to overcome the shortcomings of the currently used on-site methods for MA detection in suspected cargos, the present study explores the potential of electrochemical identification of MA by means of square wave voltammetry on disposable graphite screen-printed electrodes. Hence, the analytical characterization of the method was evaluated under optimal conditions exhibiting a linear range between 50 μM and 2.5 mM MA, a LOD of 16.7 μM, a LOQ of 50.0 μM and a sensitivity of 5.3 μA mM^-1. Interestingly, two zones in the potential window were identified for the detection of MA, depending on its concentration in solution. Furthermore, the oxidative pathway of MA was elucidated employing liquid chromatography - mass spectrometry to understand the change in the electrochemical profile. Thereafter, the selectivity of the method towards MA in mixtures with other drugs of abuse as well as common adulterants/cutting agents was evaluated. Finally, the described method was employed for the analysis of MA in confiscated samples and compared with forensic methods, displaying its potential as a fast and easy-to-use method for on-site analysis.

Enhanced Luminol Chemiluminescence with Oxidase-like Properties of FeOOH Nanorods for the Sensitive Detection of Uric Acid

FeOOH nanorods, as one-dimensional nanomaterials, have been widely used in many fields due to their stable properties, low cost, and easy synthesis, but their application in the field of chemiluminescence (CL) is rarely reported. In this work, FeOOH nanorods were synthesized by a simple and environmentally friendly one-pot hydrothermal method and used for the first time as a catalyst for generating strong CL with luminol without additional oxidant. Remarkably, luminol-FeOOH exhibits about 250 times stronger CL than the luminol-H₂O₂ system. Its CL intensity was significantly quenched by uric acid. We established a simple, rapid, sensitive, and selective CL method for the detection of uric acid with a linear range of 20-1000 nM and a detection limit of 6.3 nM (S/N = 3). In addition, we successfully applied this method to the detection of uric acid in human serum, and the standard recoveries were 95.6-106.4%.

A review on advances in the development of electrochemical sensors for the detection of anesthetic drugs

Surgeries are a crucial medical intervention that has saved countless lives from time immemorial. To reduce pain during surgeries patients are administered with anesthetic drugs, which cause loss of sensation and thus reduce the pain involved. However, anesthetists control the effects of the drug by depending on pharmacokinetic calculations, which may vary from patient to patient, thus leading to a reduction in the quality of anesthetic care and adverse effects. To avoid these adverse effects, it is highly necessary to implement a real time monitoring of plasma drug concentration, which will adjust the drug infusion and maintain the levels of drug within therapeutic levels. To implement such a system, it is highly essential to analyze current advances in electrochemical sensor systems for different types of anesthetic drugs like opioids, intravenous anesthetics, and neuromuscular blockers. This review focuses on the present strategy of electrochemical sensors implemented for the detection of anesthetic drugs and it helps towards developing a real time drug dispensing system with respect to the plasma concentration of the drug. This analysis will contribute towards establishing highly effective real time drug dispensing systems like the total intravenous anesthesia technique and patient-controlled analgesia. Such systems will lead to better usage of anesthetic drugs and improve the quality of anesthetic care thus making surgeries safer and more painless.

Rapid On-Site Detection of Illicit Drugs in Smuggled Samples with a Portable Electrochemical Device

The smuggling of illicit drugs urges the development of new tools for rapid on-site identification in cargos. Current methods rely on presumptive color tests and portable spectroscopic techniques. However, these methods sometimes exhibit inaccurate results due to commonly used cutting agents, the colorful nature of the sample or because the drugs are smuggled in common goods. Interestingly, electrochemical sensors can deal with these specific problems. Herein, an electrochemical device is presented that uses affordable screen-printed electrodes for the electrochemical profiling of several illicit drugs by square-wave voltammetry (SWV). The identification of the illicit compound is based on the oxidation potential of the analyte. Hence, a library of electrochemical profiles is built upon the analysis of illicit drugs and common cutting agents. This library allows the design of a tailor-made script that enables the identification of each drug through a user-friendly interface (laptop or mobile phone). Importantly, the electrochemical test is compared by analyzing 48 confiscated samples with other portable devices based on Raman and FTIR spectroscopy as well as a laboratory standard method (i.e., gas chromatography–mass spectrometry). Overall, the electrochemical results, obtained through the analysis of different samples from confiscated cargos at an end-user site, present a promising alternative to current methods, offering low-cost and rapid testing in the field.