Automatic and Integrated Micro-Enzyme Assay (AIμEA) Platform for Highly Sensitive Thrombin Analysis via an Engineered Fluorescence Protein-Functionalized Monolithic Capillary Column

DNAzyme-driven bipedal DNA walker for label-free and signal-on electrochemical detection of amyloid-β oligomer

As a common technique for detecting AβO, the enzyme-linked immunosorbent assay (ELISA) method is time-consuming, high in cost, and poor in stability. Therefore, it is necessary to develop a highly sensitive, method-simple and low-cost method for the selective detection of AβO. Here, we created a novel signal-on and label-free electrochemical aptamer sensor for the detection of AβO based on a DNAzyme-driven DNA bipedal walking strategy. Compared with common DNA walkers, bipedal DNA walkers exhibit larger walking areas and faster walking kinetics, and provide higher amplification efficiency. The DNAwalker is powered by an Mg²⁺-dependent DNAzyme, and the binding-induced DNAwalker continuously clamps the MB, unlocking several active G-quadruplex-forming sequences. These G-quadruplexes can be further combined by hemin to generate a G-quadruplex/heme complex, resulting in an amperometric signal, resulting in a broad proportional band from 0.1 pM to 1 nM and an excellent detection range of 46 fM. A bipedal DNA walker aptamer sensor can detect human serum AβO with remarkable specificity, high reproducibility and practical application value.

Universal gold nanoparticle modified hybrid monolithic substrate developed for facile in-column post-functionalization

Organic-inorganic hybrid monolithic columns, due to the comprehensive advantages, have been applied as promising solid-phase separation matrices for pretreatment of complex samples in biomedical and environmental analyses, however, a tremendous time and efforts are cost to optimize the preparation methods of hybrid monolithic columns with different functional groups for various target analytes. Herein, we proposed a strategy to develop basic hybrid monolithic column materials for flexible and facile post-functionalization. Three kinds of single-functionalized (amine, thiol, and carboxyl) and two kinds of bi-functionalized (amine and thiol, and amine and carboxyl) hybrid monolithic columns were immobilized with gold nanoparticles (GNPs) as intermediary bridge to construct the universal substrates. The GNPs adsorption capacities of the five hybrid monoliths were compared through qualitative characterization and quantitative analysis. Thioglycolic acid (TGA) and an aptamer against human α-thrombin were respectively used for further functionalizing the substrates to select the most suitable hybrid monolith for optional post-functionalization. It was reported for the first time that the coverage density of TGA on functionalized monolithic column modified by GNPs was 168.41 nmol μL^-1. Notably, the coverage density (2205.8 pmol μL^-1) of the aptamer decorated on the hybrid monolithic column was significantly higher than most other similar materials in published works. After that, the aptamer functionalized hybrid monolithic column screened out was applied for the solid-phase microextraction of thrombin, which possessed excellent adsorption selectivity in interference experiment. Consequently, the developed GNPs modified amine- and thiol-bi-functionalized hybrid monolithic column is an attractive universal substrate to realize easy and efficient post-modification of separation materials for other target analytes in complex samples avoiding a lot of time and labor consumption in the optimization of process preparation.

Automatic Sensing Setup for Methamphetamine Based on the Reactional Wettability Variation Strategy

An automatic setup for reactional wettability variation (RWV) was developed by interlinking liquid selection and transportation, object movement, and image recognition. In this way, the performance of the RWV strategy is updated to a nearly unmanned control manner with the example of methamphetamine and its aptamer. On the automatic RWV detection setup, the sensing surface acts similarly as before. The aptamer-based sensing surface resulted from the breakdown of the hydrophobic basis. The hydrophobicity is constructed on the metastable aptamer layer, which is responsive to the corresponding target. Methamphetamine interacts with its corresponding aptamer and destroys the basis of the hydrophobicity. A decrease in contact angle indicates the existence of methamphetamine. The RWV phenomenon is also affected by concentration and temperature. The development of an automatic detection ability would bring new possibilities to the surface reaction on smarter detection.

Target-activated transcription for the amplified sensing of protease biomarkers

Signal amplification is an effective way to achieve sensitive analysis of biomarkers, exhibiting great promise in biomedical research and clinical diagnosis. Inspired by the transcription process, here we present a versatile strategy that enables effective amplification of proteolysis into nucleic acid signal outputs in a homogeneous system. In this strategy, a protease-activatable T7 RNA polymerase is engineered as the signal amplifier and achieves 3 orders of magnitude amplification in signal gain. The versatility of this strategy has been demonstrated by the development of sensitive and selective assays for protease biomarkers, such as matrix metalloproteinase-2 (MMP-2) and thrombin, with sub-picomole sensitivity, which is 4.3 × 103-fold lower than that of the standard peptide-based method. Moreover, the proposed assay has been further applied in the detection of MMP-2 secreted by cancer cells, as well as in the assessment of MMP-2 levels in osteosarcoma tissue samples, providing a general approach for the monitoring of protease biomarkers in clinical diagnosis.

Application of Capillary Electrophoresis with Laser-Induced Fluorescence to Immunoassays and Enzyme Assays

Capillary electrophoresis using laser-induced fluorescence detection (CE-LIF) is one of the most sensitive separation tools among electrical separation methods. The use of CE-LIF in immunoassays and enzyme assays has gained a reputation in recent years for its high detection sensitivity, short analysis time, and accurate quantification. Immunoassays are bioassay platforms that rely on binding reactions between an antigen (analyte) and a specific antibody. Enzyme assays measure enzymatic activity through quantitative analysis of substrates and products by the reaction of enzymes in purified enzyme or cell systems. These two category analyses play an important role in the context of biopharmaceutical analysis, clinical therapy, drug discovery, and diagnosis analysis. This review discusses the expanding portfolio of immune and enzyme assays using CE-LIF and focuses on the advantages and disadvantages of these methods over the ten years of existing technology since 2008.

Inhibition of catalytic activity of fibrinogen-stabilized gold nanoparticles via thrombin-induced inclusion of nanoparticle into fibrin: Application for thrombin sensing with more than 104-fold selectivity

Citrate-capped gold nanoparticles (AuNPs) modified with thrombin-binding aptamer are often implemented for colorimetric, fluorescent, and electrochemical detection of thrombin in an aqueous solution. However, researchers have rarely explored the application of fibrinogen-modified AuNPs (F-AuNPs) for thrombin sensing. We present a simple, inexpensive, sensitive, and selective probe for colorimetric assay of thrombin through combining thrombin-induced inclusion of F-AuNPs into Fibrin and F-AuNPs-catalyzed reduction of 4-nitrophenol with an excess amount of NaBH₄. Considering that fibrinogen stabilized citrate-capped AuNPs against a high-ionic-strength buffer, F-AuNPs efficiently catalyzed the NaBH₄-mediated decrease of yellow 4-nitrophenol to colorless 4-aminophenol. The presence of thrombin converted fibrinogen into fibrin on the nanoparticle surface, leading to the inclusion of nanoparticles into fibrin. The formation of fibrin inhibited that the AuNPs catalyzed the NaBH₄-mediated reduction of 4-nitrophenol. Consequently, the color of the solution gradually varied from colorless to yellow with increasing thrombin concentration. The proposed system was shown to be accurate in the quantification of small differences in the concentration of human thrombin over the range of 4-60 pM. The lowest detectable concentration of human thrombin by the naked eye was as low as 16 pM. We demonstrated the practical application of the proposed system in quantifying 1-15 nM human thrombin in human plasma.

SH2 Superbinder Modified Monolithic Capillary Column for the Sensitive Analysis of Protein Tyrosine Phosphorylation

In this study, we present a method to specifically capture phosphotyrosine (pTyr) peptides from minute amount of sample for the sensitive analysis of protein tyrosine phosphorylation. We immobilized SH2 superbinder on a monolithic capillary column to construct a microreactor to enrich pTyr peptides. It was found that the synthetic pTyr peptide could be specifically enriched by the microreactor from the peptide mixture prepared by spiking of the synthetic pTyr peptide into the tryptic digests of α-casein and β-casein with molar ratios of 1:1000:1000. The microreactor was further applied to enrich pTyr peptides from pervanadate-treated HeLa cell digests for phosphoproteomics analysis, which resulted in the identification of 796 unique pTyr sites. In contrast, the conventional SH2 superbinder-based method identified 41 pTyr sites for the same sample, only 5.2% of the number achieved by the microreactor. Finally, this microreactor was also applied to analyze the pTyr in Shc1 complex, an immunopurified protein complex, which resulted in the identification of 15 pTyr sites. Together, this technique is best fitted to analyze the pTyr in minute amount of sample and will have broad application in fields where only a limited amount of sample is available.

Development and characteristics of polymer monoliths for advanced LC bioscreening applications: A review

Biomedical research advances over the past two decades in bioseparation science and engineering have led to the development of new adsorbent systems called monoliths, mostly as stationary supports for liquid chromatography (LC) applications. They are acknowledged to offer better mass transfer hydrodynamics than their particulate counterparts. Also, their architectural and morphological traits can be tailored in situ to meet the hydrodynamic size of molecules which include proteins, pDNA, cells and viral targets. This has enabled their development for a plethora of enhanced bioscreening applications including biosensing, biomolecular purification, concentration and separation, achieved through the introduction of specific functional moieties or ligands (such as triethylamine, N,N-dimethyl-N-dodecylamine, antibodies, enzymes and aptamers) into the molecular architecture of monoliths. Notwithstanding, the application of monoliths presents major material and bioprocess challenges. The relationship between in-process polymerisation characteristics and the physicochemical properties of monolith is critical to optimise chromatographic performance. There is also a need to develop theoretical models for non-invasive analyses and predictions. This review article therefore discusses in-process analytical conditions, functionalisation chemistries and ligands relevant to establish the characteristics of monoliths in order to facilitate a wide range of enhanced bioscreening applications. It gives emphasis to the development of functional polymethacrylate monoliths for microfluidic and preparative scale bio-applications.