New Mechanism of Extractive Electrospray Ionization Mass Spectrometry for Heterogeneous Solid Particles

Direct mass spectrometry analysis of exhaled human breath in real-time

The molecular composition of exhaled human breath can reflect various physiological and pathological conditions. Considerable progress has been achieved over the past decade in real-time analysis of exhaled human breath using direct mass spectrometry methods, including selected ion flow tube mass spectrometry, proton transfer reaction mass spectrometry, extractive electrospray ionization mass spectrometry, secondary electrospray ionization mass spectrometry, acetone-assisted negative photoionization mass spectrometry, atmospheric pressure photoionization mass spectrometry, and low-pressure photoionization mass spectrometry. Here, recent developments in direct mass spectrometry analysis of exhaled human breath are reviewed with regard to analytical performance (chemical sensitivity, selectivity, quantitative capabilities) and applications of the developed methods in disease diagnosis, targeted molecular detection, and real-time metabolic monitoring.

Deeper Understanding of Solvent-Based Ambient Ionization Mass Spectrometry: Are Molecular Profiles Primarily Dictated by Extraction Mechanisms?

Solvent-based ambient ionization mass spectrometry (MS) techniques provide a powerful approach for direct chemical analysis and molecular profiling of biological tissues. While molecular profiling of tissues has been widely used for disease diagnosis, little is understood about how the interplay among solvent properties, matrix effects, and ion suppression can influence the detection of biological molecules. Here, we perform a systematic investigation of the extraction processes of lipids using an ambient ionization droplet microsampling platform to investigate how the physicochemical properties of the solvent systems and extraction time influence molecular extraction and detection. Direct molecular profiling and quantitative liquid chromatography-mass spectrometry (LC-MS) of discrete solvent droplets after surface sampling were investigated to provide insights into extraction and ionization mechanisms. The results of this study suggest that intermolecular interactions such as hydrogen bonding play a major role in extraction and detection of lipids using solvent-based ambient ionization techniques. In addition, extraction time was observed to impact the molecular profiles obtained, suggesting optimization of this parameter can be performed to favor detection of specific analytes.

How Soft Is Secondary Electrospray Ionization?

Secondary electrospray ionization (SESI) mass spectrometry (MS) is a direct infusion technique often used for untargeted metabolomics, e.g., for online breath analysis. SESI is thought to be a soft ionization method, which is important to avoid interference from in-source fragments and to simplify compound annotation. In this work, benzylammonium ions, formed from volatile benzylamines, with known bond dissociation enthalpies were used as thermometer ions to investigate the internal energy distribution of ions that are produced by SESI. It is shown that SESI is softer than electrospray ionization (ESI), and therefore, SESI indeed qualifies as a soft ionization technique. However, we also found that the standard MS instrument settings used in the SESI community are relatively harsh. Proper soft tuning of the instrument is essential to fully benefit from the softness that SESI can provide. Moreover, there is evidence from in-source collision-induced dissociation (CID) experiments that analytes can be solvated in SESI under soft conditions, which supports a recently proposed SESI mechanism referred to as ligand switching.

Toward a molecular understanding of the surface composition of atmospherically relevant organic particles

Many mass spectrometry methods using various ionization sources provide bulk composition of airborne particles, but little is known about the surface species that play a major role in determining their physicochemical properties that impact air quality, climate, and health. The present work shows that the composition of surface layers of atmospherically relevant submicron organic particles can be probed without the use of an external ionization source. Solid dicarboxylic acid particles are used as models, with glutaric acid being the most efficient at generating ions. Coating with small diacids or products from α-pinene ozonolysis demonstrates that ions are ejected from the surface, providing surface molecular characterization of organic particles on the fly. This unique approach provides a path forward for elucidating the role of the surface in determining chemical and physical properties of particles, including heterogeneous reactions, particle growth, water uptake, and interactions with biological systems.

Characteristics and seasonal variations of high-molecular-weight oligomers in urban haze aerosols

Organic aerosols (OA) undergo sophisticated physiochemical processes in the atmosphere, playing a crucial role in extreme haze formations over the Northern China Plain. However, current understandings of the detailed composition and formation pathways are limited. In this study, high-molecular weight (HMW) species were observed in samples collected year-round in urban Beijing, especially in autumn and winter, during 2016-2017. The positive-ion-mode mass spectra of matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS) showed that higher signal intensities were obtained in the mass-to-charge (m/z) ranges of 200-500 and 800-900, with repetitive mass difference patterns of m/z 12, 14, 16, and 18. This provided sound evidence that high-molecular-weight oligomers were generated as haze episodes became exacerbated. These oligomer signal intensities were enhanced in the presence of high relative humidity, aerosol water content, and PM_2.5 (particles with an aerodynamic diameter ≤ 2.5 μm) mass, proving that the multiphase reaction processes play a fundamental role in haze formation in Beijing. Our study can form a basis for improved air pollution mitigation measures aimed at OA to improve health outcomes.

Real-Time Detection of Aerosol Metals Using Online Extractive Electrospray Ionization Mass Spectrometry

Metal emissions are of major environmental and practical concern because of their highly toxic effects on human health and ecosystems. Current technologies available in the market for their detection are typically limited by a time resolution of 1 h or longer (e.g., via semicontinuous X-ray fluorescence measurements) or are nonquantitative (e.g., laser ablation mass spectrometry). In this work, we report the development of a novel technique for the real-time detection and monitoring of metal particles in situ using an extractive electrospray ionization (EESI) source coupled to a high-resolution time-of-flight mass spectrometer (TOF-MS). The experiments were conducted in negative ionization mode using disodium ethylenediamine tetraacetic acid (EDTA) dihydrate to chelate with metals and form stable metal complexes. Results for water-soluble metal compounds were obtained. The following representative metal ions were examined: Pb, Cd, Zn, Ce (III), Ba, Ni, Fe(II), Fe(III), Cu(II), Cr, Mo, Co(II), Mg, Nd, Li, Ti, Ca, Cs, Ag, Tm, Er(III), La(III), Yb(III), Eu(III), Pr(III), Gd(III), Lu(III), Dy(III), Tb(III), Ho, and Ru(III). The results showed a very good linear mass response (R² = 0.9983), low ng/m³ limits of detection (LoD), and a fast response time (1 s). The stability and repeatability of the developed EESI-TOF-MS were tested under complex dynamic and periodic experimental conditions, and negligible matrix effects were measured for internally and externally mixed metal particles. Benchmark testing against inductively coupled plasma-mass spectrometry (ICP-MS) was also performed, highlighting the online measurement capabilities of aerosol metals with a LoD lower than those of ICP-MS. Proof-of-concept ambient measurements were performed in New Delhi, India, and very promising results were obtained, allowing further exploitation elsewhere.

Probing surfaces of atmospherically relevant organic particles by easy ambient sonic-spray ionization mass spectrometry (EASI-MS)

EASI-MS is a promising technique for probing the chemical structures of inhomogeneous airborne organic particles.

Both ambient and laboratory-generated particles can have a surface composition different from the bulk, but there are currently few analytical techniques available to probe these differences. Easy ambient sonic-spray ionization mass spectrometry (EASI-MS) was applied to solid, laboratory-generated particles with core–shell morphologies formed from a variety of dicarboxylic acids. The soft ionization facilitated parent peak detection for the two compounds, from which the depth probed could be determined from the relative signal intensities. Two different configurations of a custom-made nebulizer are reported that yield different probe depths. In the “orthogonal mode,” with the nebulizer ∼10 centimeters away from the particle stream and at a 90° angle to the MS inlet, evaporation of the nebulizer droplets forms ions before interaction with the particles. The probe depth for orthogonal mode EASI-MS is shown to be 2–4 nm in these particle systems. In the “droplet mode”, the nebulizer and particle streams are in close proximity to each other and the MS inlet so that the particles interact with charged liquid droplets. This configuration resulted in full dissolution of the particles and gives particle composition similar to that from collection on filters and extraction of the particles (bulk). These studies establish that EASI-MS is a promising technique for probing the chemical structures of inhomogeneous airborne organic particles.