Spectrum-Resolved Dual-Color Electrochemiluminescence Immunoassay for Simultaneous Detection of Two Targets with Nanocrystals as Tags

Recent advances in receptor-based optical biosensors for the detection of multiplex biomarkers

Multiplex biosensors are highly sought-after tools in disease diagnosis. This technique involves the simultaneous sensing of multiple biomarkers, whose levels and ratios can provide a more comprehensive assessment of disease conditions compared to single biomarker detection. In most diseases like cancer due to its complexity, several biomarkers are involved in their occurrence. On the other hand, a single biomarker may be implicated in various diseases. Multiplex sensing employs various techniques, such as optical, electrochemical, and electrochemiluminescence methods. This comprehensive review focuses on optical multiplex sensing techniques, including surface plasmon resonance, localized surface plasmon resonance, fluorescence resonance energy transfer, chemiluminescence, surface-enhanced Raman spectroscopy, and photonic crystal sensors. The review delves into their mechanisms, materials utilized, and strategies for biomarker detection.

Unary Au Nanocrystal with Prestored Electrons and Intrinsic Low Hole-Injected Potential for Low-Triggering Potential Electrochemiluminescence

Screening a novel electrochemiluminescence (ECL) system and lowering the ECL triggering potential are essential to ECL evolution. Herein, the near-infrared (NIR) ECL system with low-triggering potential ECL was constructed with weakly reductive tert-butylamine borane as coreactant and mercaptosuccinic acid/citrate (MSA/Cit)-capped Au (MSA/Cit@AuNCs) as luminophores. Toxic-element-free and dual-ligand MSA/Cit@AuNCs were prepared via ligand exchange and utilized as a model for developing unary metal NCs-based luminophores with more enhanced ECL performance than monoligand Au nanocrystals (AuNCs), which exhibited a two hole-injected process at around 0.48 and 0.80 V, respectively. Beneficial to the intrinsic low hole-injected potential of AuNCs, MSA/Cit@AuNCs exhibited similar low-triggering ECL potential at around 0.57 V with the participation of series coreactants or not, originating from the recombination of an internal prestored electron within the conduction band (CB) and electroinjected holes at around 0.25 V. Furthermore, the enhanced low-triggering potential around 0.57 V and NIR ECL around 835 nm of MSA/Cit@AuNCs was eventually obtained with the reductive tert-butylamine borane or N2H4·H2O containing a -C-N single-bond structure merely as coreactant. The low-triggering potential ECL of MSA/Cit@AuNCs/tert-butylamine borane system at 0.57 V can be harnessed to selectively determine a carcinoembryonic antigen (CEA) with one linear range spanning from 2 to 20000 fg/mL and a limit of detection of 0.33 fg/mL (S/N = 3). This study will contribute to a more comprehensive understanding of the ECL mechanism in terms of both regulating NCs and selecting coreactants.

Recent Advances in Luminophores for Enhanced Electrochemiluminescence Analysis

Electrochemiluminescence (ECL) detection is widely applied in many fields, including chemical measurement, biological analysis, and clinic tests, due to its high sensitivity. Currently, the fast development of many new electrochemical luminophores is continuously improving the ECL-based detection ability. Besides the enhancement of luminescence emission for a high detection sensitivity, minimizing the effect of co-reactants on ECL detection and achieving multiple analysis in one sample are also the main directions in this field. This review focuses on a summary of recently prepared new luminophores to achieve the three aims mentioned above. Especially, the review is composed by three parts, focusing on the luminophores or materials with high ECL efficiency, self-enhancing properties, and multi-color ECL luminophores. The fabrication of biosensors using these molecules is also reviewed to exhibit the advances in biological applications.

Silver Nanocluster-Tagged Electrochemiluminescence Immunoassay with a Sole and Narrow Triggering Potential Window

The commercialized electrochemiluminescence (ECL) immunoassay is carried out by holding luminophore Ru(bpy)32+ at a given potential. Designing an electrochemiluminophore with a narrow triggering potential window is strongly anticipated to decrease the electrochemical cross-talk and improve the flux of the commercialized ECL immunoassay in a potential-resolved way. Herein, L-penicillamine-capped silver nanoclusters (LPA-AgNCs) are facilely synthesized and utilized as tags to perform the ECL immunoassay with a sole and narrow triggering potential window of 0.24 V by employing hydrazine (N2H4) as a coreactant. The maximum ECL emission of the LPA-AgNCs/N2H4 system is located ca. +1.27 V. Upon immobilizing LPA-AgNCs onto the electrode surface via forming a sandwich immunocomplex, the ECL of LPA-AgNCs/N2H4 can be utilized to sensitively and selectively determine human carcinoembryonic antigen from 0.5 to 1000 pg/mL with a low limit of detection of 0.1 pg/mL (S/N = 3). This work might open a way to screen electrochemiluminophores for the multiple ECL immunoassay in a potential-resolved way.

Potential-resolved electrochemiluminescence biosensor for simultaneous determination of multiplex miRNA

The multi-target simultaneous detection strategy based on potential-resolved electrochemiluminescence (ECL) has still been a research hotspot in analytical science, but the limited selection of ECL luminophores hinders the development of this field. Herein, polyethyleneimine functionalized perylene derivatives (PTC-PEI) and luminol functionalized gold nanoparticles (Lu-Au NPs) possessed significantly resolved emission potentials as ECL luminophore. The ternary ECL system was constructed with MoS2 nanoflowers and K2S2O8 as the coreaction accelerator and coreactant respectively, which significantly improved the cathode ECL emission of PTC-PEI. Simultaneously, the anode coreaction accelerator ZnO nanoflowers could promote the anode coreactant dissolved O2 reduction, and extremely enhanced the anode ECL emission of Lu-Au NPs. The proposed strategy addressed the major technical challenge of cross interference and competition of the coreactants for dual-biomarker detection, thus enabling accurate detection of miRNA-205 and miRNA-21 from 10 fM to 100 nM, with detection limits of 2.57 and 1.15 fM, respectively. In general, this work achieved a single-step synchronous detection of dual biomarkers, providing a new idea for the ECL detection of multiple biomarkers, and having potential value in the clinical diagnosis.

Copper nanoclusters electrochemiluminescence with tunable near-infrared emission wavelength for ultrasensitive detection of matrix metalloproteinase-2

Herein, the methionine (Met)/N-acetyl-L-cysteine (NAC) templated copper nanoclusters (Met/NAC-Cu NCs) with tunable near-infrared region (NIR) electrochemiluminescence (ECL) emission wavelength was firstly synthesized as emitter for the ultrasensitive detection of matrix metalloproteinase-2 (MMP-2). Significantly, the NAC played the role of template and reductant of cupric to acquire Cu NCs, and the surface defect regulator Met was used to connect NAC through -S-S- bond, which could heighten the surface defect of Cu NCs to continuously regulate the maximum ECL emission by successively controlling the molar ratio of Met and NAC, leading to the ECL emission wavelength of Cu NCs ranged from 680 nm to 750 nm. In addition, a rapid target triggered catalyst hairpin assembly (CHA) recycling amplification strategy was constructed through orderly and equidistantly arranging hairpin to increase its local concentration, resulting in greatly accelerated signal amplification efficiency and reaction rate. As a proof of concept, based on Met/NAC-Cu NCs as NIR ECL emitter and effective signal amplification tactic, a super-sensitive ECL biosensor was fabricated to detect target MMP-2 with the detection limit (LOD) as low as 1.65 fg/mL and successfully utilized for detecting of MMP-2 that from Hela and MCF-7 cancer cells. This research provided a wonderful avenue for regulating the optical performance of metal nanoclusters-based ECL emitters, and the developed neoteric NIR ECL emitter with the merits of less photochemical damage and deeper tissue penetration exhibited great potential in ultrasensitive biosensing and high-definition ECL imaging.

Nanozyme-Catalyzed Metasurface Plasmon Sensor-Based Portable Ultrasensitive Optical Quantification Platform for Cancer Biomarker Screening

Developing plasmonic biosensors that are low-cost, portable, and relatively simple to operate remains challenging. Herein, a novel metasurface plasmon-etch immunosensor is described, namely a nanozyme-linked immunosorbent surface plasmon resonance biosensor, for the ultrasensitive and specific detection of cancer biomarkers. Gold-silver composite nano cup array metasurface plasmon resonance chip and artificial nanozyme-labeled antibody are used in two-way sandwich analyte detection. Changes in the biosensor's absorption spectrum are measured before and after chip surface etching, which can be applied to immunoassays without requiring separation or amplification. The device achieved a limit of alpha-fetoprotein (AFP) detection < 21.74 fM, three orders of magnitude lower than that of commercial enzyme-linked immunosorbent assay kits. Additionally, carcinoembryonic antigen (CEA) and carbohydrate antigen 125 (CA125) are used for quantitative detection to verify the universality of the platform. More importantly, the accuracy of the platform is verified using 60 clinical samples; compared with the hospital results, the three biomarkers achieve high sensitivity (CEA: 95.7%; CA125: 90.9%; AFP: 86.7%) and specificity (CEA: 97.3%; CA125: 93.9%; AFP: 97.8%). Due to its rapidity, ease of use, and high throughput, the platform has the potential for high-throughput rapid detection to facilitate cancer screening or early diagnostic testing in biosensing.

Gold Microbeads Enabled Proximity Electrochemiluminescence for Highly Sensitive and Size-Encoded Multiplex Immunoassays

Developing highly sensitive multiplex immunoassays is urgently needed to guide medical research and improve clinical diagnosis. Here, we report the proximity electrochemiluminescence (ECL) generation enabled by gold microbeads (GMBs) for improving the detection sensitivity and multiplexing capacity of ECL immunoassays (ECLIAs). As demonstrated by microscopy and finite element simulation, GMBs can function as spherical ultramicroelectrodes for triggering ECL reactions in solutions. Employing GMBs as solid carriers in the bead-based ECLIA, the electrochemical oxidation of a coreactant can occur at both the GMB surface and the substrate electrode, allowing the coreactant radicals to diffuse only a short distance of ∼100 nm to react with ECL luminophores that are labeled on the GMB surface. The ECL generation via this proximity low oxidation potential (LOP) route results in a 21.7-fold increase in the turnover frequency of ECL generation compared with the non-conductive microbeads that rely exclusively on the conventional LOP route. Moreover, the proximity ECL generation is not restricted by the diffusion distance of short-lived coreactant radicals, which enables the simultaneous determination of multiple acute myocardial infarction biomarkers using size-encoded GMB-based multiplex ECLIAs. This work brings new insight into the understanding of ECL mechanisms and may advance the practical use of multiplex ECLIAs.

Electrochemiluminescence of Semiconductor Quantum Dots and Its Biosensing Applications: A Comprehensive Review

Electrochemiluminescence (ECL) is the chemiluminescence triggered by electrochemical reactions. Due to the unique excitation mode and inherent low background, ECL has been a powerful analytical technique to be widely used in biosensing and imaging. As an emerging ECL luminophore, semiconductor quantum dots (QDs) have apparent advantages over traditional molecular luminophores in terms of luminescence efficiency and signal modulation ability. Therefore, the development of an efficient ECL system with QDs as luminophores is of great significance to improve the sensitivity and detection flux of ECL biosensors. In this review, we give a comprehensive summary of recent advances in ECL using semiconductor QDs as luminophores. The luminescence process and ECL mechanism of semiconductor QDs with various coreactants are discussed first. Specifically, the influence of surface defects on ECL performance of semiconductor QDs is emphasized and several typical ECL enhancement strategies are summarized. Then, the applications of semiconductor QDs in ECL biosensing are overviewed, including immunoassay, nucleic acid analysis and the detection of small molecules. Finally, the challenges and prospects of semiconductor QDs as ECL luminophores in biosensing are featured.

Unique Electron-Transfer-Mediated Electrochemiluminescence of AuPt Bimetallic Nanoclusters and the Application in Cancer Immunoassay

Noble Metal nanoclusters (NCs) are promising electrochemiluminescence (ECL) emitters due to their amazing optical properties and excellent biocompatibility. They have been widely used in the detection of ions, pollutant molecules, biomolecules, etc. Herein, we found that glutathione-capped AuPt bimetallic NCs (GSH-AuPt NCs) emitted strong anodic ECL signals with triethylamine as co-reactants which had no fluorescence (FL) response. Due to the synergistic effect of bimetallic structures, the ECL signals of AuPt NCs were 6.8 and 94 times higher than those of monometallic Au and Pt NCs, respectively. The electric and optical properties of GSH-AuPt NCs differed from those of Au and Pt NCs completely. An electron-transfer mediated ECL mechanism was proposed. The excited electrons may be neutralized by Pt(II) in GSH-Pt and GSH-AuPt NCs, resulting in the vanished FL. Furthermore, abundant TEA radicals formed on the anode contributed electrons to the highest unoccupied molecular orbital of GSH-Au_2.5Pt NCs and Pt(II), booming intense ECL signals. Because of the ligand effect and ensemble effect, bimetallic AuPt NCs exhibited much stronger ECL than GSH-Au NCs. A sandwich-type immunoassay for alpha fetoprotein (AFP) cancer biomarkers was fabricated with GSH-AuPt NCs as signal tags, which displayed a wide linear range from 0.01 to 1000 ng·mL^-1 and a limit of detection (LOD) down to 1.0 pg·mL^-1 at 3S/N. Compared to previous ECL AFP immunoassays, this method not only had a wider linear range but also a lower LOD. The recoveries of AFP in human serum were around 108%, providing a wonderful strategy for fast, sensitive, and accurate cancer diagnosis.

Surface-Defect-Involved and Eye-Visible Electrochemiluminescence of Unary Copper Nanoclusters for Immunoassay

A single-stabilizer-capped strategy is proposed for achieving highly efficient and surface-defect-involved electrochemiluminescence (ECL) from unary copper nanoclusters (NCs) via employing l-cysteine (Cys) as a capping agent of luminophore. The Cys-capped CuNCs (Cys-CuNCs) can be electrochemically injected with valence band (VB) holes and exhibit eye-touchable ECL processes around +0.95 and +1.15 V upon employing TPrA as a coreactant. Both accumulated ECL spectra and spooling ECL spectra demonstrated that the two ECL processes are of the same single waveband and spectrally identical to each other with the same maximum emission wavelength of 640 nm. Promisingly, ECL of the Cys-CuNCs/TPrA system is obviously red-shifted for ∼150 nm to PL of Cys-CuNCs, indicating that the bandgap-engineered routes for ECLs of Cys-CuNCs are completely blocked. The oxidative-reduction ECL process of the Cys-CuNCs/TPrA system is a kind of highly efficient, eye-visible, and single-color emission in surface-defect-involved route. The capping agent of Cys can enable the CuNCs/TPrA system with a stronger ECL than other thiol capping agents, so that Cys-CuNCs are utilized as ECL tags for sensitive and selective immunoassays, which exhibit a wide linear response range from 0.05 pg/mL to 0.5 ng/mL and a limit of detection of 0.01 pg/mL (S/N = 3) with carcinoembryonic antigen as the analyte. Moreover, both the luminophore Cys-CuNCs and conjugates Ab₂-CuNCs can be safely stored in aqueous media without any protector, which is promising for the evolution and clinic application of metal NC ECL in the surface-defect-involved route.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

Merging microfluidics with luminescence immunoassays for urgent point-of-care diagnostics of COVID-19

The Coronavirus disease 2019 (COVID-19) outbreak has urged the establishment of a global-wide rapid diagnostic system. Current widely-used tests for COVID-19 include nucleic acid assays, immunoassays, and radiological imaging. Immunoassays play an irreplaceable role in rapidly diagnosing COVID-19 and monitoring the patients for the assessment of their severity, risks of the immune storm, and prediction of treatment outcomes. Despite of the enormous needs for immunoassays, the widespread use of traditional immunoassay platforms is still limited by high cost and low automation, which are currently not suitable for point-of-care tests (POCTs). Microfluidic chips with the features of low consumption, high throughput, and integration, provide the potential to enable immunoassays for POCTs, especially in remote areas. Meanwhile, luminescence detection can be merged with immunoassays on microfluidic platforms for their good performance in quantification, sensitivity, and specificity. This review introduces both homogenous and heterogenous luminescence immunoassays with various microfluidic platforms. We also summarize the strengths and weaknesses of the categorized methods, highlighting their recent typical progress. Additionally, different microfluidic platforms are described for comparison. The latest advances in combining luminescence immunoassays with microfluidic platforms for POCTs of COVID-19 are further explained with antigens, antibodies, and related cytokines. Finally, challenges and future perspectives were discussed.

Dual-mode electrochemiluminescence and electrochemical sensor for alpha-fetoprotein detection in human serum based on vertically ordered mesoporous silica films

In this study, we demonstrated the highly sensitive detection of alpha-fetoprotein (AFP) by electrochemiluminescence (ECL) and electrochemistry (EC) based on the gated transport of the bifunctional probe (tris(1,10-phenanthroline) ruthenium (II) chloride, Ru (phen)₃Cl₂) into the nanochannels of vertically ordered mesoporous silica films (VMSFs). Due to the negatively charged surface and ultrasmall pore size, VMSF displays a signal amplification effect on Ru (phen)₃Cl₂ and is suitable for the construction of sensors with excellent sensitivity. With the linkage of (3-glycidyloxypropyl) trimethoxysilane, the anti-AFP antibody could covalently bind to the external surface of VMSF, generating a highly specific recognized sensing interface toward AFP. When AFP is presented, the formed immunocomplex hinders the diffusion of Ru (phen)₃Cl₂ to the underlying electrode surface, resulting in a decreased ECL or EC response. The dual-mode detection of AFP is achieved with a relatively low limit of detection (0.56 fg/ml for ECL and 4.5 pg/ml for EC) and a wide linear range (10 fg/ml∼1 μg/ml for ECL and 10 pg/ml∼1 μg/ml for EC). Moreover, owing to the inherent anti-fouling property of VMSF, satisfactory results in the analysis of human serum were obtained, showing the great potential of the designed strategy in clinical diagnosis.

Shell-Isolated Nanoparticle-Enhanced Electrochemiluminescence

Enhanced electrochemiluminescence (ECL) aims to promote higher sensitivity and obtain better detection limit. The core-shell nanostructures, owing to unique surface plasmon resonance (SPR) enabling distance-dependent strong localized electromagnetic field, have attracted rising attention in enhanced ECL research and application. However, the present structures usually with porous shell involve electrocatalytic activity from the metal core and adsorption effect from the shell, which interfere with practical SPR enhancement contribution to ECL signal. Herein, to exclude the interference and unveil exact SPR-enhanced effect, shell-isolated nanoparticles (SHINs) whose shell gets thicker and becomes pinhole-free are developed by modifying pH value and particles concentration. Furthermore, allowing for the distribution of hotspots and stronger enhancement, excitation intensity and ECL reaction layer thickness are mainly investigated, and several types of SHINs-enhanced ECL platforms are prepared to fabricate distinct hotspot distribution via electrostatic attraction (submonolayer) and a layer-by-layer deposition method (monolayer). Consequently, the strongest enhancement up to ≈250-fold is achieved by monolayer SHINs with 10 nm shell, and the platform is applied in a "turn-off" mode sensing for dopamine. The platform provides new guidelines to shell preparation, interface engineering and hotspots fabrication for superior ECL enhancement and analytical application with high performance.

Coreactant-free and Near-Infrared Electrochemiluminescence Immunoassay with n-Type Au Nanocrystals as Luminophores

The electrochemiluminescence (ECL) bioassay is prominently carried out with the involvement of the coreactant. To remove the detrimental effects of the coreactant on the ECL of luminophores, herein, a promising ECL immunoassay strategy with biocompatible nanoparticles as the luminophore is proposed, which involves directly and electrochemically oxidizing the luminophore methionine-capped Au (Met@Au) nanocrystals (NCs) without the participation of any coreactant. Met@Au NCs are a kind of n-type nanoparticles, and they can be electrochemically injected with valence band (VB) holes around +0.80 and +1.10 V (vs Ag/AgCl). The electrochemically injected exogenous VB hole can recombine with the endogenous conduction band electron of Met@Au NCs and eventually bring out two coreactant-free and near-infrared ECL processes around 0.80 V (ECL-1) and 1.10 V (ECL-2). The intensity of coreactant-free ECL is primarily determined by the electrochemical oxidation-induced hole-injection process. ECL-2 is considerably stronger than ECL-1 and can be exploited for determining the carcinoembryonic antigen (CEA) in a sandwich immunoassay procedure with a linear range from 0.1 to 50 pg/mL as well as a limit of detection of 0.03 pg/mL (S/N = 3).

Surface-Enhanced Electrochemiluminescence Imaging for Multiplexed Immunoassays of Cancer Markers in Exhaled Breath Condensates

Recently we have demonstrated that the surface plasmon of noble metal nanoparticles can effectively enhance the ECL intensity of Ru(bpy)₃²⁺, and we named this detection principle as surface-enhanced electrochemiluminescence (SEECL-I). However, SEECL based on photomultiplier tube (PMT) detection can only detect one target at a time, which is not suitable for multiple targets detection. In this work, we combined our previous developed SEECL with a bioimaging device to develop a novel multiplexed immunassay for simultaneous and fast analysis of cancer markers. A core-shell nanocomposite consisted of gold-silicon dioxide nanoparticles doped with Ru(bpy)₃²⁺(Au@SiO₂-Ru) with strong ECL emission was employed as ECL label due to the localized surface plasmon resonance (LSPR) of AuNPs, which can significantly enhance the ECL emission of Ru(bpy₎₃²⁺. The ECL signals from the 4 × 4 electrode arrays were collected using the constant potential method (current-time curve method) imaging with a sCOMS camera. As a proof-of-concept application, we demonstrated the use of the proposed SEECL-I for simultaneous detection of carcinoembryonic antigen (CEA), neuron specific enolase (NSE), and squamous cell carcinoma antigen (SCC) in exhaled breath condensates (EBCs) with low detection limit (LOD) of 0.17, 0.33, and 0.33 pg/mL (S/N = 3), respectively. The results demonstrated that the proposed SEECL-I strategy can provide a high sensitivity, fast analysis, and high-throughput platform for clinical diagnosis of cancer markers in EBCs.

Enzyme-controllable just-in-time production system of copper hexacyanoferrate nanoparticles with oxidase-mimicking activity for highly sensitive colorimetric immunoassay

Nanozymes are a series of elaborately designed nanomaterials that can mimic the catalytic sites of natural enzymes for reactions. Bypassing the tedious design and preparation of nanomaterial, in this work, we report on a novel just-in-time production system of copper hexacyanoferrate nanoparticles (CHNPs), which act as an oxidase-mimicking nanozyme. This system can rapidly produce CHNPs nanozyme on demand by simply mixing Cu(II) with potassium hexacyanoferrate(III) (K₃[Fe(CN)₆]). It is found that once K₃[Fe(CN)₆] is reduced to K₄[Fe(CN)₆], the formation of CHNPs is inhibited. Therefore, the just-in-time production system of CHNPs was coupled with alkaline phosphatase (ALP) to construct an enzyme-controllable just-in-time production (ECJP) system, in which ALP could inhibit the production of by catalyzing the hydrolysis of ascorbic acid 2-phosphate (AAP) to generating ascorbic acid (AA). The ECJP system is then used to probe the activity of ALP by employing 2,2'-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) as the chromogenic substrate, and a detection limit of 0.003 U L^-1 was achieved. Moreover, by adapting ALP as the enzyme label, an ECJP system-based colorimetric immunoassay protocol was established for sensitive detection of aflatoxin B₁ (AFB₁), and a detection limit as low as 0.73 pg mL^-1 was achieved. The developed immunoassay method is successfully applied to the detection of AFB₁ in peanut samples. The operation of ECJP system is quite simple and the coupling of ALP with CHNPs nanozyme can arouse dual enzyme-like cascade signal amplification. So, we believe this work can offer a new perspective for the development of nanozymes-based biodetection methods and colorimetric immunoassay strategies.

Electrochemiluminescence with semiconductor (nano)materials

Electrochemiluminescence (ECL) is the light production triggered by reactions at the electrode surface. Its intrinsic features based on a dual electrochemical/photophysical nature have made it an attractive and powerful method across diverse fields in applied and fundamental research. Herein, we review the combination of ECL with semiconductor (SC) materials presenting various typical dimensions and structures, which has opened new uses of ECL and offered exciting opportunities for (bio)sensing and imaging. In particular, we highlight this particularly rich domain at the interface between photoelectrochemistry, SC material chemistry and analytical chemistry. After an introduction to the ECL and SC fundamentals, we gather the recent advances with representative examples of new strategies to generate ECL in original configurations. Indeed, bulk SC can be used as electrode materials with unusual ECL properties or light-addressable systems. At the nanoscale, the SC nanocrystals or quantum dots (QDs) constitute excellent bright ECL nano-emitters with tuneable emission wavelengths and remarkable stability. Finally, the challenges and future prospects are discussed for the design of new detection strategies in (bio)analytical chemistry, light-addressable systems, imaging or infrared devices.

Electrochemiluminescent emission potential tunable Cu-Zn-In-S/ZnS nanocrystals for multiplex microRNAs potential-resolved detection

The development of a multi-target simultaneous detection electrochemiluminescence (ECL) strategy remains a great research interest, however, the limited choice of ECL luminophores is the main limitation holding the field back. In this study, a band gap tunable Cu-Zn-In-S/ZnS nanocrystals (CZIS/ZnS NCs) was synthesized and applied to a potential-resolved ECL detection strategy. By changing the Cu ratio in the precursor, the CZIS/ZnS NCs ECL emission spectrum and emission potential were tuned from 480 to 750 nm and -2.10 to -1.11 V, respectively. In addition, an ECL biosensor was fabricated with CZIS/ZnS NCs as signal reporters to detect three types of microRNAs, which could sensitively and selectively determine microRNA-21, microRNA-141, and microRNA-155 in a single cathodic ECL process. The results showed that the ECL intensity was directly linear to the logarithm of the concentration of microRNA-21, microRNA-141, and microRNA-155 from 0.00001 to 10 nM with detection limits of 2.2, 2.6, and 2.7 fM, respectively. This study demonstrates that the emission potential tunable CZIS/ZnS NCs can be employed as a promising alternative to the toxic II-V and II-V NCs to simultaneously detect multiple disease markers, and can guide the further rational design of both ECL luminophores and multi-analyte ECL sensors.

Ultrasensitive near-infrared aptasensor for enrofloxacin detection based on wavelength tunable AgBr nanocrystals electrochemiluminescence emission triggered by O-terminated Ti3C2 MXene

Toxic-free and easily accessible electrochemiluminescence (ECL) emitter/luminophore with near-infrared (NIR) emission is highly anticipated for ECL biosensor evolution. In this study, well-dispersed AgBr nanocrystals (NCs) decorated Ti₃C₂ MXene nanocomposites (Ti₃C₂-AgBrNCs) were prepared using a simple wet chemical technique and demonstrated highly efficient NIR ECL emission. For the first time, Ti₃C₂-AgBrNCs displayed wavelength-tunable ECL emission with varied Ti₃C₂ contents. Interestingly, further experimental data revealed that the ECL emission wavelength of Ti₃C₂-AgBrNCs red-shifted from 550 to 665 nm as Ti₃C₂ content increased, which can be attributed to the surface-defect effect generated by the oxygen-containing functional groups in Ti₃C₂ MXene. In particular, the ECL emission at 665 nm of Ti₃C₂-AgBrNCs nanocomposites not only revealed a 3.5 times increased ECL intensity but also a more stable ECL signal compared to pure AgBr NCs. As a proof of concept, a direct-type NIR ECL aptasensor with signal-on strategy was constructed with the Ti₃C₂-AgBrNCs nanocomposites as an ECL platform and enrofloxacin (ENR) as a model analyte. The NIR ECL aptasensor exhibited high sensitivity, a wide linear range from 1.0 × 10^-12 mol/L to 1.0 × 10^-6 mol/L and a low detection limit (5.97 × 10^-13 mol/L). This research offered a viable alternative way for producing toxic-free and efficient near-infrared ECL luminophores in bioanalysis and wavelength-tuning light-emitting devices.

Single-nanoparticle spectroelectrochemistry studies enabled by localized surface plasmon resonance

This review describes recent progress of spectroelectrochemistry (SEC) analysis of single metallic nanoparticles (NPs) which have strong surface plasmon resonance properties. Dark-field scattering (DFS), photoluminescence (PL), and electrogenerated chemiluminescence (ECL) are three commonly used optical methods to detect individual NPs and investigate their local redox activities in an electrochemical cell. These SEC methods are highly dependent on a strong light-scattering cross-section of plasmonic metals and their electrocatalytic characteristics. The surface chemistry and the catalyzed reaction mechanism of single NPs and their chemical transformations can be studied using these SEC methods. Recent progress in the experimental design and fundamental understanding of single-NP electrochemistry and catalyzed reactions using DFS, PL, and ECL is described along with selected examples from recent publications in this field. Perspectives on the challenges and possible solutions for these SEC methods and potential new directions are discussed.

Electrochemiluminescence of water-dispersed nitrogen and sulfur doped carbon dots synthesized from amino acids

A facile one-pot hydrothermal approach for synthesizing water-dispersed nitrogen and sulfur doped carbon dots (NS-CDs) with high luminescence quantum yield was explored, using cysteine and tryptophan as precursors. The NS-CDs were characterized by means of FT-IR spectroscopy, XRD, TEM, etc. It was found that the absolute photoluminescence quantum yield (QY) of the NS-CDs determined with an integrating sphere can reach up to 73%, with an average decay time of 17.06 ns. Electrochemiluminescence (ECL) behaviors and mechanisms of the NS-CDs/K₂S₂O₈ coreactant system were investigated. When the working electrode was modified with the prepared NS-CDs, the ECL efficiency of the NS-CDs with K₂S₂O₈ was 24%, relative to Ru(bpy)₃Cl₂/K₂S₂O₈. This work shows great potential for the NS-CDs to be used in bioanalytical applications.

Multiplex Electrochemiluminescence Polarization Assay Based on the Surface Plasmon Coupling Effect of Au NPs and Ag@Au NPs

A novel multiplex electrochemiluminescence (ECL) polarization assay was developed to detect breast cancer-related genes BRCA1 and BRCA2 simultaneously based on the polarization characteristics of surface plasmon-coupled electrochemiluminescence (SPC-ECL). In this work, boron nitride quantum dots (BN QDs) were used as ECL emitters, and gold nanoparticles (Au NPs) and gold-coated silver nanoparticles (Ag@Au NPs) were employed as surface plasmon materials. The surface plasmon coupling resonance of different metal NPs not only enhanced the ECL intensity but also converted the isotropic emission into directional emission. This study revealed the relation between the structure of metal nanomaterials and SPC-ECL, and a high polarization-resolved sensing system was designed to detect multitarget DNA from 100 aM to 1 nM simultaneously. Polarization-based multiple ECL analysis has broad prospects in related cancer diagnosis and treatment evaluation.

Spatially-resolved dual-potential sandwich electrochemiluminescence immunosensor for the simultaneous determination of carbohydrate antigen 19-9 and carbohydrate antigen 24-2

A new electrochemiluminescence (ECL) immunosensor based on spatially-resolved dual-potential technology was designed for the simultaneous determination of carbohydrate antigen 19-9 (CA 19-9) and carbohydrate antigen 24-2 (CA 242). Luminol-AgNPs@ZIF-67 was used as the anodic probe, and Pt nanoparticle-functionalized graphitic carbon nitride nanosheets (g-C₃N₄@PtNPs) were used as the cathodic probe. Two spatially-resolved areas on the dual-disk glassy carbon electrode (DDGCE) were modified with a AuNPs film by electrodeposition to improve the conductivity of the sensing interface. By recording the ECL responses at two different excitation potentials, the linear range for CA 19-9 was determined to be 0.0001-10 U/mL, with a limit of detection of 31 μU/mL. The linear range for CA 242 was 0.0005-10 U/mL, with a limit of detection of 0.16 mU/mL. Moreover, the ECL immunosensor possessed high selectivity and stability and successfully detected CA 19-9 and CA 242 in real samples. This immunosensor provides a new platform for clinical immunoassays.

Acridone and acridinium constructs with red-shifted emission

Acridinium 9-carboxylic acid derivatives have been extensively used as chemiluminescent labels in diagnostic assays. Triggering acridinium with basic hydrogen peroxide produces a highly strained dioxetanone intermediate, which converts into an acridone in an electronically excited state and emits light at 420-440 nm. Here, we introduce a novel acridinium-fluorescein construct emitting at 530 nm, in which fluorescein is covalently attached to the acridinium N-10 nitrogen via a propyl sulfonamide linker. To characterize the spectral properties of the acridinium-fluorescein chemiluminophores, we synthesized the analogous acridone-fluorescein constructs. Both acridinium and acridone were linked to either 5- or 6-carboxyfluorescein and independently synthesized as individual structural isomers. Using fluorescent acridone-fluorophore tandems, we investigated and optimized the diluent composition to prevent dye aggregation. As monomolecular species, the acridone isomers demonstrated similar absorption, excitation, and emission spectra, as well as the expected fluorescence lifetimes and molecular brightness. Chemical triggering of acridinium-fluorescein tandems, as well as direct excitation of their acridone-fluorescein analogs, resulted in a nearly complete energy transfer from acridone to fluorescein. Acridone-based dyes can be studied with steady-state spectroscopy. Thus, they will serve as useful tools for structure and solvent optimizations, as well as for studying chemiluminescent energy transfer mechanisms in related acridinium-fluorophore tandems. Direct investigations of the light-emitting molecules generated in the acridinium chemiluminescent reaction empower further development of chemiluminescent labels with red-shifted emission. As illustrated by the two-color HIV model immunoassay, such labels can find immediate applications for multicolor detection in clinical diagnostic assays.

Enhanced Near-Infrared Electrochemiluminescence from Trinary Ag-In-S to Multinary Ag-Ga-In-S Nanocrystals via Doping-in-Growth and Its Immunosensing Applications

Screening toxic-element-free and biocompatible electrochemiluminophores was crucial for electrochemiluminescence (ECL) evolution. Herein, l-glutathione (GSH)-capped Ag-Ga-In-S (AGIS) nanocrystals (NCs) were prepared by doping Ag-In-S (AIS) NCs in a doping-in-growth way and utilized as a model for both ECL modulating and developing multinary NC-based electrochemiluminophores with enhanced ECL performance than trinary NCs. AGIS NCs not only primarily preserved the morphology, size, phase structure, and water monodisperse characteristics of AIS NCs with broadened band gap but also demonstrated obviously enhanced oxidative-reduction ECL than AIS NCs. Importantly, ECL of AGIS NCs was located at the near-infrared region with a maximum emission wavelength of 744 nm and could be utilized for an ECL immunoassay with human prostate-specific antigen (PSA) as a model, which exhibited a linearity range from 0.05 pg/mL to 1.0 ng/mL and a low limit of detection of 0.01 pg/mL (S/N = 3). This work provided a promising alternative to the traditional binary NCs for developing toxic-element-free and biocompatible electrochemiluminophores with efficient near-infrared ECL.

Fluorescence sensing strategy based on aptamer recognition and mismatched catalytic hairpin assembly for highly sensitive detection of alpha-fetoprotein

At present, alpha fetoprotein (AFP) is mainly used as a serum marker of primary Hepatocellular carcinoma. A simple, enzyme-free sensing strategy is introduced for highly sensitive fluorescence detection of AFP. This detection strategy is based on aptamer recognition and mismatched catalytic hairpin assembly (MCHA). At first, Trigger is locked by aptamer before the introduction of AFP in this aptamer-MCHA system. The aptamer preferentially combines with AFP via powerful attraction in the presence of AFP. This results in the release of trigger and initiation of MCHA cycle, thus forming the H1 and H2 double chain complexes (denoted as H1@H2). Finally, H1@H2 and double chain structure containing fluorophore and its quenched group- BHQ1 (denoted as F@Q) initiated displacement reaction, which caused double chain separation and fluorescence recovery. This assay produces a wide detection range, which is from 0.1 ng mL^-1 to 10 μg mL^-1 and the limit of detection as 0.033 ng mL^-1. The whole detection process was performed at 37 °C for 60 min. In addition, this assay had high anti-interference ability and could be used to detect AFP in clinical serum. This novel AFP detection strategy is able to screen of Hepatocellular carcinoma.

Plasmon-enhanced quantum dots electrochemiluminescence aptasensor for selective and sensitive detection of cardiac troponin I

The development of highly sensitive electrochemiluminescence (ECL) immunosensors by using functional nanoparticles as signal amplifiers is a solution towards sensitive determination of many low concentration disease biomarkers. Herein, a sensitive aptamer-based, sandwich-type surface plasmon enhanced electrochemiluminescence (SPEECL) immunosensor was demonstrated for the detection of cardiac troponin I (cTnI), by means of aptamer conjugated CdS QDs and AuNPs as ECL luminophores and plasmon sources, respectively, in which Tro4 aptamer was used as a capture probe for cTnI and Tro6 aptamer as a detecting probe. The signal of the developed SPEECL system showed ~ 5-fold increment as compared to that of without AuNPs. Using this ECL platform for the detection of cTnI, a linear range and the limit of detection (LOD) were found to be 1 fg/mL - 10 ng/mL and 0.75 fg/mL, respectively.

Quantum Dots with Highly Efficient, Stable, and Multicolor Electrochemiluminescence

Outstanding photoluminescence (PL) and electroluminescence properties of quantum dots (QDs) promise possibilities for them to meet challenging expectations of electrochemiluminescence (ECL), which at present relies on inefficient and spectral-irresolvable emitters based on transition-metal complexes (such as Ru(bpy)3 2+). However, ECL is reported to be extremely sensitive to the surface traps on the QDs likely because of the spatially and temporally separated electrochemical charge injections. Results here reveal that, by engineering the interior inorganic structure (CdSe/CdS/ZnS core/shell/shell structure) and inorganic-organic interface using new synthetic methods, the trap-insensitive QDs with near-unity PL quantum yield and monoexponential PL decay dynamics in water generated narrow band-edge ECL with efficiencies about six orders of magnitude higher than that of the standard Ru(bpy)3 2+. The band-edge and spectrally resolved ECL from CdSe/CdS/ZnS core/shell/shell QDs demonstrated a new readout scheme using electrochemical potential. Excellent ECL performance of QDs uncovered here offer opportunities to realize the full potential of ECL for biomedical detection and diagnosis.

Sensitively detecting mTBI biomarker S100B by using peptide-modified ratiometric fluorescent C/AuNCs nanoprobe

Mild traumatic brain injury (mTBI) has become a tough nut in forensic science because of its minor damages but serious consequences. Utilizing biomarkers to diagnose mTBI has become a promising approach due to various shortcomings of traditional diagnostic methods. In this work, we developed a peptide-modified ratiometric fluorescent nanoprobe based on carbon dots (CDs) and gold nanoclusters (AuNCs) for the measurements of a pivotal biomarker S100B protein in the early diagnosis of mTBI. It has been found that florescence intensity of AuNCs at 580 nm was decreased as report signal while the florescence intensity of CDs was unchanged as reference signal in this sensing system when the surface modified peptide bind tightly with calcium-activated S100B. Under the optimized conditions, S100B concentration ranging from 0.03 to 1 μg/mL was successfully determined within 30 min, and the detection limit of 0.01 μg/mL was acquired through the standard rule (S/N = 3). Moreover, the detection of S100B in spiked blood samples were conducted with satisfactory recoveries. The as-prepared ratiometric fluorescent nanoprobe was proved to be a time-saving, convenient, and sensitive strategy, and it showed great prospects in the early diagnosis of mTBI in forensic practice.

Design of organic/inorganic nanocomposites for ultrasensitive electrochemical detection of a cancer biomarker protein

A new type of nanocomposite composed of carboxylated single-walled carbon nanotubes (CNTs-COOH), reduced graphene oxide (rGO), bovine serum albumin-Ag hybride (Ag@BSA), and poly(3,4-ethylenedioxythiophene) (PEDOT) was fabricated to develop an ultrasensitive electrochemical platform for the detection of carcinoembryonic antigen (CEA) as a model of biomarkers. Two steps are involved for the fabrication of the organic/inorganic nanocomposites. The Ag@BSA nanoflowers were first synthesized to be doped with CNTs-COOH and rGO followed by the adsorption of PEDOT resulting in CNTs-COOH/rGO/Ag@BSA/PEDOT. The as-prepared nanocomposites were then deposited onto an Au electrode together with subsequent immobilization of CEA antibody (anti-CEA) to construct the electrochemical immunosensor. This unique structure and composition of the developed immunosensor can expect an excellent electrochemical response. The immunosensor offers a linear relationship between the electrochemical responses and the CEA concentrations from 0.002 to 50 ng∙mL^-1 with a detection limit of 1 × 10^-4 ng∙mL^-1. Moreover, the ultrasensitive immunoassay can detect CEA in real human serum samples, and the results are comparable to those obtained from the commercial ELISA. Therefore, this strategy can monitor diseases, offer clinical diagnosis, and may be valuable for the development of new biomedical devices.