Construction of Biomass-Derived Hybrid Organogel Electrodes with a Cross-Linking Conductive Network for High-Performance All-Solid-State Supercapacitors

Binary Biomass-Based Electrolyte Films for High-Performance All-Solid-State Supercapacitor

Solid-state electrolytes have received widespread attention for solving the problem of the leakage of liquid electrolytes and effectively improving the overall performance of supercapacitors. However, the electrochemical performance and environmental friendliness of solid-state electrolytes still need to be further improved. Here, a binary biomass-based solid electrolyte film (LSE) was successfully synthesized through the incorporation of lignin nanoparticles (LNPs) with sodium alginate (SA). The impact of the mass ratio of SA to LNPs on the microstructure, porosity, electrolyte absorption capacity, ionic conductivity, and electrochemical properties of the LSE was thoroughly investigated. The results indicated that as the proportion of SA increased from 5% to 15% of LNPs, the pore structure of the LSE became increasingly uniform and abundant. Consequently, enhancements were observed in porosity, liquid absorption capacity, ionic conductivity, and overall electrochemical performance. Notably, at an SA amount of 15% of LNPs, the ionic conductivity of the resultant LSE-15 was recorded at 14.10 mS cm-1, with the porosity and liquid absorption capacity reaching 58.4% and 308%, respectively. LSE-15 was employed as a solid electrolyte, while LNP-based carbon aerogel (LCA) served as the two electrodes in the construction of a symmetric all-solid-state supercapacitor (SSC). The SSC device demonstrated exceptional electrochemical storage capacity, achieving a specific capacitance of 197 F g-1 at 0.5 A g-1, along with a maximum energy and power density of 27.33 W h kg-1 and 4998 W kg-1, respectively. Furthermore, the SSC device exhibited highly stable electrochemical performance under extreme conditions, including compression, bending, and both series and parallel connections. Therefore, the development and application of binary biomass-based solid electrolyte films in supercapacitors represent a promising strategy for harnessing high-value biomass resources in the field of energy storage.

Surfactant-assisted preparation of all-gel-state flexible supercapacitor with remarkable electrochemical performance based on polyaniline-polyacrylamide/sodium alginate hydrogels

The electrochemical performance of polyaniline-based all-gel-state supercapacitor (AGSSC) is significantly depended on the dispersity and mass loaded of polyaniline (PANI). In this manuscript, inspired by the properties of surfactant, sodium dodecylbenzene sulfonate (SDBS) was introduced to prepare various PANI-polyacrylamide/sodium alginate/SDBS (PANIy-PSSx) AGSSCs. With presence of SDBS, the electrochemical performance of PANIy-PSSx AGSSCs was greatly improved, displaying a trend of initial rise and then decrease with increasing concentration of SDBS from 0 to 0.75 wt%. As the content of SDBS was 0.5 wt%, the resulting PANI1.0-PSS0.5 AGSSC displayed the optimum electrochemical properties with area capacitance and energy density of 913.79 mF/cm2 and 81.23 μWh/cm2, respectively. The capacitance rate of PANI1.0-PSS0.5 AGSSC was still more than 93 % after 2000 cycles of sequential CV scans at the scan rate of 200 mV/s. These data were greatly higher than many reported PANI-based AGSSCs. Moreover, the resultant PANI1.0-PSS0.5 AGSSC could maintain high electrochemical performance even after various operations, such as compression, puncture, fluctuating temperature, bending situations and various voltage windows and series-parallel connections. The resultant PANI1.0-PSS0.5 AGSSC had the wide potentials to satisfy the real application requirements. This study offered a facile strategy for design and preparation of flexible supercapacitor with excellent electrochemical performance.

Lignosulfonate sodium assisted PEDOT-based all-gel supercapacitors with enhanced supercapacitance and wide temperature tolerance

Conducting polymer hydrogels are typically employed in all-gel supercapacitors; however, Poly[3,4-ethylene-dioxythiophene] (PEDOT)-based hydrogel supercapacitors still suffer from low capacitance because of the low packing density of PEDOT in the electrodes. Here, we demonstrate lignosulfonate sodium (LS) as an excellent template to synthesize various LS-PEDOT conductive nanofillers for high mass-loading LS-PEDOT/PAAM hydrogel electrodes. Then, the optimum LS-PEDOT/PAAM electrode was assembled with a redox-active LS/PAAM/Fe3+ hydrogel electrolyte to form sandwich-structured all-gel supercapacitors, which could deliver a high specific capacitance of 672.5 mF/cm2 and an energy efficiency of 60 μWh/cm2, which are three times higher than the 220 mF/cm2 and 19.5 μWh/cm2 of the device without Fe3+ at the same condition. Such a device shows excellent temperature tolerance from -30 to 100 °C. Besides, the LS-PEDOT/PAAM electrode has excellent photothermal conversion effects under simulated solar illumination. The sluggish electrochemical performance of the SC under low temperatures could be significantly boosted by ~50 % under simulated solar light. All of these findings demonstrate that the capacitance performance of the PEDOT-based hydrogel device is successfully improved not only at room temperature but also under subzero conditions.