Click Chemistry with Cyclopentadiene

Unique Reactivity of the 1,4-Bis(silyloxy)-1,3-cyclopentadiene Moiety: Application to the Synthesis of 7-Norbornanone Derivatives

We describe a method for the synthesis of various 2-silyloxy-2-norbornen-7-ones by exploiting the specific reactivity of the 1,4-bis(silyloxy)-1,3-cyclopentadiene framework, which is generated by the silylation of a 2,2-disubstituted-1,3-cyclopentanedione bearing a picolinoyloxy group at the 2' position of its C-2 side chain. The release of the acyloxy group during the reaction generates carbocations that are then attacked by silyloxy-substituted carbons in the 1,4-bis(silyloxy)-1,3-cyclopentadiene moiety skeleton, forming a 4,5-cis-fused ring skeleton. Skeletal rearrangement of the bicyclic core results in the formation of the corresponding 2-silyloxy-2-norbornen-7-one. This novel transformation of 1,3-cyclopentanedione moieties can be used to synthesise other cyclopentenone-fused bicyclic frameworks.

Enantioselective and Regiodivergent Gold and Chiral Brønsted Acid Catalyzed Cycloisomerization/Diels-Alder Reaction of 1,10-Dien-4-yn-3-yl Acetates: Synthesis of Norbornene-Embedded Tricarbocycles

A synthetic method for the enantioselective and regiodivergent synthesis of hexahydro-2H-2,4a-methanonaphthalen-4-yl and octahydro-2,4-methanoazulen-1-yl esters that relies on the gold(I)- and chiral Brønsted acid-catalyzed cycloisomerization/Diels-Alder (CDA) reaction of (E)-1,10-dien-4-yn-3-yl acetates is described.

Temperature-Dependent Divergent Cyclopentadiene Synthesis through Cobalt-Catalyzed C-C Activation of Cyclopropenes

We report a temperature-dependent divergent approach to synthesize multisubstituted cyclopentadienes through cobalt-catalyzed carbon-carbon (C-C) bond activation of cyclopropenes and ring expansion with internal alkynes. By employing different heating procedures, two cyclopentadiene substitution isomers were efficiently and selectively constructed. This reaction does not require preactivation of the metal catalyst or additional reducing reagents. Preliminary mechanistic investigations suggest that the key steps are oxidative addition of the cyclopropene to cobalt catalyst, followed by alkyne insertion and 1,5-ester shift.

Ni-Catalyzed 1,5-Sigmatropic Ester Shift on Cyclopentadiene Rings: Regioselective Conversion of 5,5-Disubstituted Cyclopentadienes to CH2-Cyclopentadienes

Described herein is a nickel(II)-catalyzed regioselective rearrangement of 5,5-disubstituted cyclopentadienes to fully functionalized CH2-cyclopentadienes via successive 1,5-sigmatropic shifts of the ester group on the quaternary carbon and hydrogen under mild basic conditions. The obtained CH2-cyclopentadienes were also readily applied in the preparation of highly functionalized dibenzo[e,g]azulene derivatives in two steps.

Isocyanide-based Multicomponent Reactions (IMCRs) in Water or Aqueous Biphasic Systems

BACKGROUND

Isocyanide is an intriguing one-carbon synthon that is frequently employed in a variety of carbon-carbon and carbon-heteroatom bond-forming reactions. Isocyanide-based multicomponent reactions (IMCRs) are effective synthetic tools in organic synthesis for the preparation of complex heterocyclic molecules. The IMCRs in water have become an attractive research direction, enabling simultaneous growth of both IMCRs and green solvents towards ideal organic synthesis.

OBJECTIVE

The goal of this review is to provide a general overview of IMCRs in water or biphasic aqueous systems for accessing various organic molecules, as well as an examination of their benefits and mechanistic insights.

CONCLUSION

High atom economies, mild reaction conditions, high yields, and catalyst-free processes are crucial features of these IMCRs in water or biphasic aqueous systems.

Reactions of 1,3-Diphenyl Cyclopentadiene with α-Aryldiazo Ketones to Enable C-H Insertions versus [4 + 2]-Cycloadditions via Au Catalyst and P(C6F5)3 Additive, Respectively

Two distinct reaction chemoselectivities were reported for the reactions of α-aryldiazo ketone with 1,3-diphenylcyclopentadiene using gold catalyst and phosphine additives, respectively. In the presence of gold catalyst, α-aryldiazo ketone forms gold carbenes initially that are trapped with this 1,3-disubstituted cyclopentadiene to afford C-H insertion products. In the presence of P(C6F5)3 additive, α-aryldiazo ketone forms diarylketenes initially at elevated temperature, which are further stabilized by P(C6F5)3 to secure their entity before proceeding to unprecedented [4C + 2C] cycloadditions.

Diels-Alder Photoclick Patterning of Extracellular Matrix for Spatially Controlled Cell Behaviors

Strategies that mimic the spatial complexity of natural tissues can provide cellular scaffolds to probe fundamental questions in cell biology and offer new materials for regenerative medicine. Here, the authors demonstrate a light-guided patterning platform that uses natural engineered extracellular matrix (ECM) proteins as a substrate to program cellular behaviors. A photocaged diene which undergoes Diels-Alder-based click chemistry upon uncaging with 365 nm light is utilized. By interfacing with commercially available maleimide dienophiles, patterning of common ECM proteins (collagen, fibronectin Matrigel, laminin) with readily purchased functional small molecules and growth factors is achieved. Finally, the use of this platform to spatially control ERK activity and migration in mammalian cells is highlighted, demonstrating programmable cell behavior through patterned chemical modification of natural ECM.

Computational study of an oxetane 4H-pyrazole as a Diels-Alder diene

We combine the effects of spirocyclization and hyperconjugation to increase the Diels-Alder reactivity of the 4H-pyrazole scaffold. A density functional theory (DFT) investigation predicts that 4H-pyrazoles containing an oxetane functionality at the saturated center are extremely reactive despite having a relatively high-lying lowest unoccupied molecular orbital (LUMO) energy.

Dynamic Properties of Di(cyclopentadienecarboxylic Acid) Dimethyl Esters

Di(cyclopentadienecarboxylic acid) dimethyl ester (DCPDME) is a potential dynamic covalent system. When such molecules are used as dynamic crosslinkers in polymers, understanding the reversibility of cyclopentadiene dimerization is crucial to determine optimal melt processing conditions. To this end, we synthesized DCPDME, which consists of three regioisomers with different physicochemical properties, which were investigated by isolating them and further characterizing them using 1H NMR, FTIR and DSC. There have been many attempts to improve the synthesis process to increase the reaction yield and purity of isomer 3, and this goal remains a challenge today. In this work, we show that pure isomers 1 and 2 irreversibly convert to the more stable DCPDME isomer 3 at temperatures between 120 and 140 °C in N2. This shows that isolation of the pure isomer 3 from the DCPDME isomer mixture is not necessary. The DCPDME isomer 3 is reversibly cleaved to the monomeric cyclopentadienecarboxylic acid methyl ester (CPME), as confirmed with GC-MS and the resulting mass spectrum. The conversion of DCPDME isomers 1 and 2 to isomer 3 was confirmed by heating the synthesized mixture of DCPDME isomers at 135 °C for 5 min in N2, producing an almost pure isomer 3 which increased its synthesis yield by 35%.

Barrier Heights for Diels-Alder Transition States Leading to Pentacyclic Adducts: A Benchmark Study of Crowded, Strained Transition States of Large Molecules

Theoretical characterization of reactions of complex molecules depends on providing consistent accuracy for the relative energies of intermediates and transition states. Here we employ the DLPNO-CCSD(T) method with core-valence correlation, large basis sets, and extrapolation to the CBS limit to provide benchmark values for Diels-Alder transition states leading to competitive strained pentacyclic adducts. We then used those benchmarks to test a diverse set of wave function and density functional methods for the absolute and relative barrier heights of these transition states. Our results show that only a few of the tested density functionals can predict the absolute barrier heights satisfactorily, although relative barrier heights are more accurate. The most accurate functionals tested are ωB97M-V, M11plus, ωB97X-V, PBE-D3(0), M11, and MN15 with MUDs from best estimates less than 3.0 kcal. These findings can guide selection of density functionals for future studies of crowded, strained transition states of large molecules.

Additivity of Diene Substituent Gibbs Free Energy Contributions for Diels-Alder Reactions between Me2C=CMe2 and Substituted Cyclopentadienes

Systematic computational studies of pericyclic Diels-Alder reactions between (H₃C)₂C=C(CH₃)₂, 1, and all permutations of substituted cyclopentadienes c-C₅R¹R²R³R⁴R^5aR^5b (R = H, CH₃, CF₃, F) allowed isolation of substitutional effects on Gibbs free energy barrier heights and reaction Gibbs free energies. "Average Substitution Gibbs Free Energy Correction" ΔG _ASC# ^‡/ΔG _ASC# values for each substituent in each position appeared to be additive. Substituent effects on barriers showed interesting contrasts. Methyl substitution at positions 5a and 5b increased barriers significantly, while substitution at all other positions had essentially no impact. In contrast, fluoro substitution at positions 5a and 5b lowered barriers more than substitution at other positions. Trifluoromethyl substitution mixed these effects, in that substitution at positions 5a and 5b increased barriers, but substitution at other positions lowered them. Despite the variances, ΔG _ASC# ^‡/ΔG _ASC# values allowed reliable prediction of barriers and exergonicities for reactions between 1 and highly substituted cyclopentadienes, and between 1 and cyclopentadienes with random mixtures of CH₃/CF₃/F substituents. ΔG _ASC# ^‡/ΔG _ASC# values were correlated with steric considerations and quantum theory of atoms in molecules (QTAIM) calculations. Overall, the ASC values provide a resource for predicting which Diels-Alder reactions of this type should occur at rapid rates and/or give stable bicyclic products.

Bioorthogonal 4H-pyrazole "click" reagents

4H-Pyrazoles are emerging as useful click reagents. Fluorinating the saturated center enables 4H-pyrazoles to react rapidly as Diels-Alder dienes without a catalyst but compromises the stability of these dienes under physiological conditions. To identify more stable 4H-pyrazoles for bioorthogonal chemistry applications, we investigated the Diels-Alder reactivity and biological stability of three 4-oxo-substituted 4H-pyrazoles. We found that these dienes undergo rapid Diels-Alder reactions with endo-bicyclo[6.1.0]non-4-yne (BCN) while being much more stable to biological nucleophiles than their fluorinated counterparts. We attribute the rapid Diels-Alder reactivity of the optimal oxygen-substituted pyrazole to a combination of antiaromaticity, predistortion, and spirocyclization. Their reactivity and stability suggest that 4-oxo-4H-pyrazoles can be useful bioorthogonal reagents.

Enantioselective Total Synthesis of (+)-Pedrolide

The first total synthesis of (+)-pedrolide, a tigliane-derived diterpenoid featuring an unprecedented 5-5-6-6-3 carbon skeleton, is reported. Key to the approach is the construction of the bicyclo[2.2.1]heptane core via an intramolecular cyclopentadiene-Diels-Alder cycloaddition. To this end, a norbornadiene serves as an effective surrogate for cyclopentadiene, which is unmasked under mild conditions involving a complex Diels-Alder reaction cascade. In addition, the synthesis provides a novel approach to a densely functionalized carane in an efficient and enantioselective manner.

Synthesis of Cyclopentadiene and Methylcyclopentadiene with Xylose or Extracted Hemicellulose

Cyclopentadiene (CPD) and methylcyclopentadiene (MCPD) are important intermediates that have been widely used in the production of high-energy-density rocket fuels, polymers and valuable chemicals. Currently, CPD and MCPD are produced from fossil energies at very low yields, which greatly limits their application. As a solution to this problem, we disclose an alternative two-step bio-route to access CPD and MCPD using xylose or extracted hemicellulose as the feedstock. In the first step, cyclopentanone (CPO) was directly produced by the selective hydrogenolysis of xylose or extracted hemicellulose over a commercial Ru/C catalyst in an acid-free toluene/NaCl aqueous solution biphasic system. In the second step, CPO was selectively converted to CPD by a cascade hydrodeoxygenation/dehydrogenation reaction over zinc molybdate catalysts. When methanol was introduced with CPO and hydrogen, MCPD was selectively obtained by a cascade dehydrogenation/aldol condensation/selective hydrodeoxygenation reaction over zinc molybdate catalysts.

Controlled Synthesis of a Homopolymer Network Using a Well-Defined Single-Component Diels-Alder Cyclopentadiene Monomer

Cyclopentadiene is known for its high reactivity and propensity to dimerize, making monomer synthesis and polymerization notoriously challenging. In fact, despite its long history and compelling chemistry, only two reports have appeared in the literature since the first attempt to homopolymerize cyclopentadiene by Staudinger in 1926. Herein, we present a strategy not only to synthesize, isolate, and homopolymerize a well-defined tetracyclopentadiene monomer but also to de-cross-link the network homopolymer. Mechanical properties are also investigated, including creep-recovery, shape memory, and tensile behaviors. Interestingly, the tensile test reflects a tough and elastic material, in contrast to prior Cp-based homopolymer networks. This work provides a versatile platform to access and study new cyclopentadiene-based and better-defined homopolymer networks with potential applications ranging from shape memory polymers to degradable thermosets.

Dearomatization of Cyclic Diphenylhydrazines: Harnessing the o-Semidine Rearrangement for the Synthesis of Spirocyclic Tetrahydroquinolines

The synthesis of novel tetrahydroquinoline-containing spirocycles has been achieved through an acid-promoted dearomatization of cyclic diarylhydrazines. The reaction, proceeding through a dearomative o-semidine rearrangement, furnishes a stable, yet reactive spirocyclohexadieniminium ion, which can further be used as an electrophile or a diene in a one-pot sequence. These transformations efficiently produce novel diazaspirocycles and allow for further synthetic elaboration of the cyclohexadienamine products.

Porphyrinatonickel(II)-Cyclopentene and Porphyrinatonickel(II)-Cyclopentadiene Hybrids: Zirconacyclopentadiene-Mediated Syntheses, Structures, and Mechanistic Study

The reaction of meso-formyl Ni(II) porphyrin 1 with zirconacyclopentadiene 2 in the presence of AlCl₃ afforded four products 3, 4, 5, and 6 with a total yield of over 85%. The structures of these compounds are well-characterized by ¹H NMR an d¹³C NMR spectroscopy, HRMS, and X-ray single-crystal diffraction. The mechanism is proposed mainly on the basis of isotopic labeling experiments, which showed that a Friedel-Crafts-type reaction and β-H shift may be critical during the formation of 5 and 6.

Cyclopentadiene as a Multifunctional Reagent for Normal- and Inverse-Electron Demand Diels-Alder Bioconjugation

Optimizing the Diels-Alder (DA) reaction for aqueous coupling has resulted in practical methods to link molecules such as drugs and diagnostic agents to proteins. Both normal electron demand (NED) and inverse electron demand (IED) DA coupling schemes have been employed, but neither mechanism entails a common multipurpose reactive group. This report focuses on expanding the bioconjugation toolbox for cyclopentadiene through the identification of reactive groups that couple through NED or IED mechanisms in aqueous solution. Dienophiles and tetrazine derivatives were screened for reactivity and selectivity toward antibodies bearing cyclopentadiene amino acids to yield bioconjugates. Twelve NED dienophiles and four tetrazine-based IED substrates were identified as capable of practical biocoupling. Furthermore, tetrazine ligation to cyclopentadiene occurred at a rate of 3.3 ± 0.5 M^-1 s^-1 and was capable of bioorthogonal transformations, as evidenced by the selective protein labeling in serum. Finally, an antibody-drug conjugate (ADC)-bearing monomethyl auristatin E was prepared via tetrazine conjugation to cyclopentadiene. The resulting ADC was stable and demonstrated potent activity in vitro. These findings expand the utility of cyclopentadiene as a tool to couple entities to proteins via dual DA addition mechanisms.

Gold-Catalyzed Regioselective Synthesis of Crowded Cyclopentadienes by Migratory Cycloisomerization of Vinylallenes

We report the regioselective synthesis of silyl-substituted cyclopentadienyl esters through gold-catalyzed migratory cycloisomerization of silyl-substituted vinylallenes. This transformation is proposed to proceed through a perfectly orchestrated sequence of events including Nazarov-like cyclization and several silyl and hydrogen rearrangements. Furthermore, exploiting the multifaceted nature of the gold catalyst, we have also identified suitable conditions for the synthesis of these cyclopentadienes in a more straightforward manner through gold-catalyzed reaction of propargyl esters and alkynylsilanes.

CO2 capture by 1,2,3-triazole-based deep eutectic solvents: the unexpected role of hydrogen bonds

Herein, tetraethylammonium 1,2,3-triazolide ([Et₄N][Tz]), 1,2,3-triazole (Tz), and ethylene glycol (EG) are used to form DESs for CO₂ capture. Surprisingly, [Et₄N][Tz]-EG DESs can react with CO₂, but [Et₄N][Tz]-Tz cannot react with CO₂, although both of the two systems contain the same anion [Tz]^-. Unexpectedly, with the addition of EG to [Et₄N][Tz]-Tz, the formed ternary DESs [Et₄N][Tz]-Tz-EG can react with CO₂, although neither EG nor [Et₄N][Tz]-Tz can react with CO₂ before the combination of them. NMR, FTIR and theoretical calculation results disclose that the surprise CO₂ absorption behavior mainly depends on the strength of hydrogen bonds (H-bonds) between the anion [Tz]^- and H-bond donors (EG or Tz). The strength of the H-bond between [Tz]^- and Tz is much stronger than that between [Tz]^- and EG. The strong H-bond between [Tz]^- and Tz in [Et₄N][Tz]-Tz greatly reduces the basicity of [Tz]^-, rendering the anion [Tz]^- unreactive to CO₂. In [Et₄N][Tz]-Tz-EG ternary DESs, EG competes with Tz to form a H-bond with [Tz]^-, which weakens the strength of the H-bond between [Tz]^- and Tz. Moreover, H-bonds also impact the desorption behavior. [Et₄N][Tz] : EG (1 : 2) is regenerated at 60 °C, whereas the chemisorbed CO₂ by [Et₄N][Tz] : Tz : EG (1 : 2 : 2) can be released even down to 30 °C.

Brønsted acid promoted substrate-dependent regiodivergent alkynylcyclopropane–cyclopentadiene rearrangement assisted by the internal carbonyl group

Facile Brønsted acid promoted alkynylcyclopropane–cyclopentadiene rearrangement, avoiding the five-membered cycloallene intermediate assisted by the internal carbonyl groups, has been developed.

Synthesis of a Bicyclo[2.2.1]heptane Skeleton with Two Oxy-Functionalized Bridgehead Carbons via the Diels-Alder Reaction

We describe a synthetic method for a bicyclo[2.2.1]heptane skeleton with two oxy-functionalized bridgehead carbons. This method involves an intermolecular Diels-Alder reaction using 5,5-disubstituted 1,4-bis(silyloxy)-1,3-cyclopentadienes, the diene structure of which has never been synthesized. Furthermore, the intramolecular Diels-Alder reaction using a diene bearing a dienophile moiety at the C-5 position can provide a tricyclic carbon framework that includes the bicyclo[2.2.1]heptane skeleton. The novel bicyclo[2.2.1]heptane derivatives could be utilized as versatile building blocks for organic synthetic chemistry.

Forgotten and forbidden chemical reactions revitalised through continuous flow technology

Continuous flow technology has played an undeniable role in enabling modern chemical synthesis, whereby a myriad of reactions can now be performed with greater efficiency, safety and control. As flow chemistry furthermore delivers more sustainable and readily scalable routes to important target structures a growing number of industrial applications are being reported. In this review we highlight the impact of flow chemistry on revitalising important chemical reactions that were either forgotten soon after their initial report as necessary improvements were not realised due to a lack of available technology, or forbidden due to unacceptable safety concerns relating to the experimental procedure. In both cases flow processing in combination with further reaction optimisation has rendered a powerful set of tools that make such transformations not only highly efficient but moreover very desirable due to a more streamlined construction of desired scaffolds. This short review highlights important contributions from academic and industrial laboratories predominantly from the last 5 years allowing the reader to gain an appreciation of the impact of flow chemistry.

Shining Light on Cyclopentadienone-Norbornadiene Diels-Alder Adducts to Enable Photoinduced Click Chemistry with Cyclopentadiene

A new Diels-Alder (DA)-based photopatterning platform is presented, which exploits the irreversible, light-induced decarbonylation and subsequent cleavage of cyclopentadienone-norbornadiene (CPD-NBD) adducts. A series of CPD-NBD adducts have been prepared and systematically studied toward the use in a polymeric material photopatterning platform. By incorporating an optimized CPD-NBD adduct into polymer networks, it is demonstrated that cyclopentadiene may be unveiled upon 365 nm irradiation and subsequently clicked to a variety of maleimides with spatial control under mild reaction conditions and with fast kinetics. Unlike currently available photoinduced Diels-Alder reactions that rely on trapping transient, photocaged dienes, this platform introduces a persistent, yet highly reactive diene after irradiation, enabling the use of photosensitive species such as cyanine dyes to be patterned. To highlight the potential use of this platform in a variety of material applications, we demonstrate two proof-of-concepts: patterned conjugation of multiple dyes into a polyacrylate network and preprogrammed ligation of streptavidin into poly(ethylene glycol) hydrogels.

Geminal Repulsion Disrupts Diels-Alder Reactions of Geminally Substituted Cyclopentadienes and 4H-Pyrazoles

We have experimentally and computationally explored the sluggish Diels-Alder reactivities of the geminally substituted 5,5-dimethylcyclopentadiene and 5,5-dimethyl-2,3-diazacyclopentadiene (4,4-dimethyl-4H-pyrazole) scaffolds. We found that geminal dimethylation of 1,2,3,4-tetramethylcyclopentadiene to 1,2,3,4,5,5-hexamethylcyclopentadiene decreases the Diels-Alder reactivity towards maleimide by 954-fold. Quantum mechanical calculations revealed that the decreased Diels-Alder reactivities of gem-dimethyl substituted cyclopentadienes and 2,3-diazacyclopentadienes are not a consequence of unfavorable steric interactions between the diene and dienophile as reported previously, but a consequence of the increased repulsion within the gem-dimethyl group in the transition state. The findings have implications for the use of cyclopentadienes in "click" chemistry.