Pursuing the Crystallization of Mono- and Polymetallic Nanosized Crystalline Inorganic Compounds by Low-Temperature Wet-Chemistry and Colloidal Routes

Visualizing In Situ Nucleation and Growth Dynamics of CdSe-Based Heterostructures Regulated by the Water/Oil-Phase Microenvironment

Wet-chemical reactions, covering almost all solution-based synthesis in either the oil-phase or water-phase microenvironment, lead to the as-formed products with distinct morphologies, structures, and functionalities. However, crystal nucleation and growth dynamics under those microenvironments for the same material system have not been clarified. Using in situ transmission electron microscopy on the classical II-VI CdSe-based heterostructures with atomic scale resolution, notably, we revealed the formation of Au on the CdSe surface in the oil phase while the AuSe product was nucleated in the water phase. The nucleation was analogous to the two-step amorphous-to-crystalline transition, followed by growth or coalescence into polycrystalline nanoparticles. During the ex situ growth, the majority of AuSe was polycrystalline (∼79%) in the water phase, in contrast to ∼52% in the oil phase. Surprisingly, the proportion of single crystals prevailed, which was significantly increased to ∼76% in the in situ case. Such distinct behaviors were further verified through the liquid-cell environment and elemental characterizations.

Rational Design and Facile Preparation of Palladium-Based Electrocatalysts for Small Molecules Oxidation

Direct liquid fuel cells (DLFCs) can convert the chemical energy of small organic molecules directly into electrical energy, which is a promising technique and always calls for electrocatalysts with high activity, stability and selectivity. Palladium (Pd)-based catalysts for DLFCs have been widely studied with the pursuit of ultra-high performance, however, most of the preparation routes require complex agents, multi-operation steps, even extreme experimental conditions, which are high-cost, energy-consuming, and not conducive to the scalable and sustainable production of catalysts. In this review, the recent progresses on not only the rational design strategies, but also the facile preparation methods of Pd-based electrocatalysts for small molecules oxidation reaction (SMOR) are comprehensively summarized. Based on the principles of green chemistry in material synthesis, the basic rules of "facile method" have been restricted, and the fabrication processes, perks and drawbacks, as well as practical applications of the "real" facile methods have been highlighted. The landscape of this review is to facilitate the mild preparation of efficient Pd-based electrocatalysts for SMOR, that is, to achieve a balance between "facile preparation" and "outstanding performance", thereby to stimulate the huge potential of sustainable nano-electrocatalysts in various research and industrial fields.

Materials-Driven Soft Wearable Bioelectronics for Connected Healthcare

In the era of Internet-of-things, many things can stay connected; however, biological systems, including those necessary for human health, remain unable to stay connected to the global Internet due to the lack of soft conformal biosensors. The fundamental challenge lies in the fact that electronics and biology are distinct and incompatible, as they are based on different materials via different functioning principles. In particular, the human body is soft and curvilinear, yet electronics are typically rigid and planar. Recent advances in materials and materials design have generated tremendous opportunities to design soft wearable bioelectronics, which may bridge the gap, enabling the ultimate dream of connected healthcare for anyone, anytime, and anywhere. We begin with a review of the historical development of healthcare, indicating the significant trend of connected healthcare. This is followed by the focal point of discussion about new materials and materials design, particularly low-dimensional nanomaterials. We summarize material types and their attributes for designing soft bioelectronic sensors; we also cover their synthesis and fabrication methods, including top-down, bottom-up, and their combined approaches. Next, we discuss the wearable energy challenges and progress made to date. In addition to front-end wearable devices, we also describe back-end machine learning algorithms, artificial intelligence, telecommunication, and software. Afterward, we describe the integration of soft wearable bioelectronic systems which have been applied in various testbeds in real-world settings, including laboratories that are preclinical and clinical environments. Finally, we narrate the remaining challenges and opportunities in conjunction with our perspectives.

Pursuing unprecedent anisotropic morphologies of halide-free Pd nanoparticles by tuning nucleation and growth

In this paper, a highly effective and scalable polyol-based modified procedure is reported, yielding shape controlled Pd nanoparticles (NPs) formed via two distinct growth mechanisms as a function of the...

Comparison of the Surface Properties of Hydrothermally Synthesised Fe3O4@C Nanocomposites at Variable Reaction Times

The influence of variable reaction time (tr) on surface/textural properties (surface area, total pore volume, and pore diameter) of carbon-encapsulated magnetite (Fe3O4@C) nanocomposites fabricated by a hydrothermal process at 190 °C for 3, 4, and 5 h was studied. The properties were calculated using the Brunauer-Emmett-Teller (BET) isotherms data. The nanocomposites were characterised using Fourier transform infrared spectroscopy, X-ray diffraction analysis, thermogravimetry, and scanning and transmission electron microscopies. Analysis of variance shows tr has the largest effect on pore volume (F value = 1117.6, p value < 0.0001), followed by the surface area (F value = 54.8, p value < 0.0001) and pore diameter (F value = 10.4, p value < 0.001) with R2-adjusted values of 99.5%, 88.5% and 63.1%, respectively. Tukey and Fisher tests confirmed tr rise to have caused increased variations in mean particle sizes (11-91 nm), crystallite sizes (5-21 nm), pore diameters (9-16 nm), pore volume (0.017-0.089 cm3 g-1) and surface area (7.6-22.4 m2 g-1) of the nanocomposites with individual and simultaneous confidence limits of 97.9 and 84.4 (p-adj < 0.05). The nanocomposites' retained Fe-O vibrations at octahedral (436 cm-1) and tetrahedral (570 cm-1) cubic ferrite sites, modest thermal stability (37-60 % weight loss), and large volume-specific surface area with potential for catalytic application in advanced oxidation processes.

Flow-Through PolyHIPE Silver-Based Catalytic Reactor

Catalytic reactors performing continuously are an important step towards more efficient and controllable processes compared to the batch operation mode. For this purpose, homogenous high internal phase emulsion polymer materials with an immobilized silver catalyst were prepared and used as a continuous plug flow reactor. Porous material with epoxide groups was functionalized to bear aldehyde groups which were used to reduce silver ions using Tollens reagent. Investigation of various parameters revealed that the mass of deposited silver depends on the aldehyde concentration as well as the composition of Tollens reagent. Nanoparticles formed on the pore surface showed high crystallinity with a cuboctahedra crystal shape and highly uniform surface coverage. The example of the 4-nitrophenol catalytic reduction in a continuous process was studied and demonstrated to be dependent on the mass of deposited silver. Furthermore, productivity increased with the volumetric silver density and flow rate, and it was preserved during prolonged usage and storage.

Room-Temperature Laser Synthesis in Liquid of Oxide, Metal-Oxide Core-Shells, and Doped Oxide Nanoparticles

Although oxide nanoparticles are ubiquitous in science and technology, a multitude of compositions, phases, structures, and doping levels exist, each one requiring a variety of conditions for their synthesis and modification. Besides, experimental procedures are frequently dominated by high temperatures or pressures and by chemical contaminants or waste. In recent years, laser synthesis of colloids emerged as a versatile approach to access a library of clean oxide nanoparticles relying on only four main strategies running at room temperature and ambient pressure: laser ablation in liquid, laser fragmentation in liquid, laser melting in liquid and laser defect-engineering in liquid. Here, established laser-based methodologies are reviewed through the presentation of a panorama of oxide nanoparticles which include pure oxidic phases, as well as unconventional structures like defective or doped oxides, non-equilibrium compounds, metal-oxide core-shells and other anisotropic morphologies. So far, these materials showed several useful properties that are discussed with special emphasis on catalytic, biomedical and optical application. Yet, given the endless number of mixed compounds accessible by the laser-assisted methodologies, there is still a lot of room to expand the library of nano-crystals and to refine the control over products as well as to improve the understanding of the whole process of nanoparticle formation. To that end, this review aims to identify the perspectives and unique opportunities of laser-based synthesis and processing of colloids for future studies of oxide nanomaterial-oriented sciences.

Low-Temperature Miniemulsion-Based Routes for Synthesis of Metal Oxides

The use of miniemulsions containing chemical precursors in the disperse phase is a versatile method to produce nanoparticles and nanostructures of different chemical nature, including not only polymers, but also a variety of inorganic materials. This Minireview focuses on materials in which nanostructures of metal oxides are synthesized in processes that involve the miniemulsion technique in any of the steps. This includes in the first place those approaches in which the spaces provided by nanodroplets are directly used to confine precipitation reactions that lead eventually to oxides. On the other hand, miniemulsions can also be used to form functionalized polymer nanoparticles that can serve either as supports or as controlling agents for the synthesis of metal oxides. Herein, the description of essential aspects of the methods is combined with the most representative examples reported in the last years for each strategy.

Low-Temperature Solution Crystallization of Nanostructured Oxides and Thin Films

As an introduction to this themed issue, a critically selected overview of recent progress on the topic of solution methods for the low-temperature crystallization of nanoscale oxide materials is presented. It is focused on the low-temperature solution processing of oxide nanostructures and thin films. Benefits derived from these methods span from minimizing the environmental impact to reducing the fabrication costs. In addition, this topic is regarded as a key objective in the area because it offers a unique opportunity for the use of these materials in areas like flexible electronics, energy conversion and storage, environmental sciences, catalysis, or biomedicine.

Exploring wet chemistry approaches to ZnFe2O4 spinel ferrite nanoparticles with different inversion degrees: a comparative study

ZnFe₂O₄ was synthesised through three different low-temperature routes to study the effect on the structural evolution of the compounds.

Quaternary ferrites by batch and continuous flow hydrothermal synthesis: a comparison

Crystalline spinel quaternary ferrites M_xZn_1−xFe₂O₄ (M = Co, Ni) were synthesised through two synthetic routes: conventional batch and continuous flow hydrothermal synthesis.

Describing inorganic nanoparticles in the context of surface reactivity and catalysis

Fabrication of inorganic nanoparticles is now a mature field. However, further advances, in particular in the field of catalysis, require a more accurate description of their surface and of the transformations occurring beneath the surface in the environment of use. Through a selection of case studies, this feature article proposes a journey from surface science to nanoparticle design, while illustrating state-of-the-art spectroscopies that help provide a relevant description of inorganic nanoparticles in the context of surface reactivity.

Effects of 1-hexanol on C12E10 micelles: a molecular simulations and light scattering study

The micelles of the non-ionic C₁₂E₁₀ surfactant and 1-hexanol as an aqueous solution additives are studied toward the purpose of understanding the role of alcohol additives in tuning the characteristics of alkyl-ethoxylate micellar systems. Our dynamic light scattering and cloud point experiments show that the addition of hexanol induces a response similar to an increase of temperature. We associate the change with increased attraction between the micelles at low to moderate hexanol loadings and a potential increase of the aggregate size at a high hexanol-to-surfactant ratio. Detailed molecular dynamic simulation characterization shows that hexanol solubilizes to a micelle palisade layer when the hexanol-to-C₁₂E₁₀ ratio is less than or equal to 0.5 while swollen micelles, in which a part of hexanol forms an oil core, are present when the ratio increases above approximately 1.5. The simulations indicate that the surface of the micelles is rough. Formation of reverse hexanol structures akin to those found in bulk octanol is observed in the oil core. Molecular simulations associate the increase in attraction between micelles observed via the experiments with decreased chain density in the headgroup region. This density decrease is caused by hexanol molecules solubilized between neighbouring surfactants. Altogether, these findings provide detailed physical characterization of the effect of an archetypal solution additive, hexanol, on an alkyl ethoxylate micelle system. These findings could bear a significance in designing micellar and emulsion based systems with desired solution characteristics or properties for e.g. drug delivery, catalysis, or platforms for green chemistry reactions.

Low-temperature crystallization of solution-derived metal oxide thin films assisted by chemical processes

Low-temperature chemical solution methods to prepare crystalline metal oxide thin films and to integrate them with flexible substrates are shown.

Evolution of hollow nanostructures in hybrid Ce1-x Cu x O2 under droplet confinement leading to synergetic effects on the physical properties

The paper discusses a successful strategy for tuning the hollow, porous or even solid morphologies of pure and Cu²⁺-doped CeO₂ nanostructures. The reaction of nanodroplets at the interface in miniemulsions is significantly affected by the concentration of dopants. The growth mechanism is both reaction- as well as diffusion-controlled, which finally determines the particular morphology. With a varying degree of dopant concentration and quantum confinement, the concentration of Ce³⁺ available on the surface of the nano-droplets and -particles is found to change quite appreciably. This immediately leads to modulation in the physical properties, such as ferromagnetism or absorption. The significant red shift in the absorption spectra and associated broadband visible photoluminescence opens newer applications for the present material in visible optoelectronic devices.

Hierarchical Mesoporous Iron Fluoride with Superior Rate Performance for Lithium-Ion Batteries

Monodispersed mesoporous iron fluorides were synthesized by a low-cost reversed micelle method. The as-prepared materials with hierarchical mesoporous structure exhibit excellent rate capability (115.6 mAh g^-1 at 2000 mA g^-1) which is superior to many other carbon-free iron fluorides. In addition, a high reversible capacity of 143.2 mAh g^-1 can be retained after 100 cycles at 1000 mA g^-1. The outstanding electrochemical features can be attributed to the particular hierarchical mesoporous structure, facilitating electrolyte penetration as well as rapid electronic and ionic transportation.