Paranemic Crossover DNA: There and Back Again

Engineering tertiary chirality in helical biopolymers

Tertiary chirality describes the handedness of supramolecular assemblies and relies not only on the primary and secondary structures of the building blocks but also on topological driving forces that have been sparsely characterized. Helical biopolymers, especially DNA, have been extensively investigated as they possess intrinsic chirality that determines the optical, mechanical, and physical properties of the ensuing material. Here, we employ the DNA tensegrity triangle as a model system to locate the tipping points in chirality inversion at the tertiary level by X-ray diffraction. We engineer tensegrity triangle crystals with incremental rotational steps between immobile junctions from 3 to 28 base pairs (bp). We construct a mathematical model that accurately predicts and explains the molecular configurations in both this work and previous studies. Our design framework is extendable to other supramolecular assemblies of helical biopolymers and can be used in the design of chiral nanomaterials, optically active molecules, and mesoporous frameworks, all of which are of interest to physical, biological, and chemical nanoscience.

Origin of 17O NMR chemical shifts based on molecular orbital theory: paramagnetic terms of the pre-α, α and β effects from orbital-to-orbital transitions, along with the effects from vinyl, carbonyl and carboxyl groups

17O NMR chemical shifts (δ(O)) were analysed based on the molecular orbital (MO) theory, using the diamagnetic, paramagnetic and total absolute magnetic shielding tensors (σd(O), σp(O) and σt(O), respectively). O2- was selected as the standard for the analysis. An excellent relationship was observed between σd(O) and the charges on O for O6+, O4+, O2+, O0 and O2-. The data from H2O, HO+, HO- and H3O+ were on the correlation line. However, such relationship was not observed for the oxygen species, other than above. The pre-α, α and β effects were evaluated bases on σt(O), where the pre-α effect arises from the protonation to a lone pair orbital on O2-, for an example. The 30-40 ppm and 20-40 ppm (downfield shifts) were predicted for the pre-α and β effects, respectively, whereas the values for the α effect was very small in magnitude, where the effect from the hydrogen bond formation should be considered. Similarly, the carbonyl effect in H2C[double bond, length as m-dash]O and the carboxyl effects in H(HO)C[double bond, length as m-dash]O were evaluated from MeOH, together with H2C[double bond, length as m-dash]CHOH from CH3CH2OH. Very large downfield shifts of 752, 425 and 207 ppm were predicted for H2C[double bond, length as m-dash]O*, H(HO)C[double bond, length as m-dash]O* and H(HO*)C[double bond, length as m-dash]O, respectively, together with the 81 ppm downfield shift for H2C[double bond, length as m-dash]CHO*H. The origin of the effect were visualized based on the occupied-to-unoccupied orbital transitions. As a result, the origin of the 17O NMR chemical shifts (δ(17O)) can be more easily imaged and understand through the image of the effects. The results would help to understand the role of O in the specific position of a compound in question and the mechanisms to arise the shift values also for the experimental scientists. The aim of this study is to establish the plain rules founded in theory for δ(17O), containing the origin, which has been achieved through the treatments.

Macrophage-Targeting DNA Nanomaterials: A Future Direction of Biological Therapy

DNA can be used for precise construction of complex and flexible micro-nanostructures, including DNA origami, frame nucleic acids, and DNA hydrogels. DNA nanomaterials have good biocompatibility and can enter macrophages via scavenger receptor-mediated endocytosis. DNA nanomaterials can be uniquely and flexibly designed to ensure efficient uptake by macrophages, which represents a novel strategy to regulate macrophage function. With the development of nanotechnology, major advances have been made in the design and manufacturing of DNA nanomaterials for clinical therapy. In diseases accompanied by macrophage disturbances including tumor, infectious diseases, arthritis, fibrosis, acute lung injury, and atherosclerosis, DNA nanomaterials received considerable attention as potential treatments. However, we lack sufficient information to guarantee precise targeting of macrophages by DNA nanomaterials, which precludes their therapeutic applications. In this review, we summarize recent studies of macrophage-targeting DNA nanomaterials and discuss the limitations and challenges of this approach with regard to its potential use as a biological therapy.

A DNA Origami-Based Gene Editing System for Efficient Gene Therapy in Vivo

DNA nanostructures have played an important role in the development of novel drug delivery systems. Herein, we report a DNA origami-based CRISPR/Cas9 gene editing system for efficient gene therapy in vivo. In our design, a PAM-rich region precisely organized on the surface of DNA origami can easily recruit and load sgRNA/Cas9 complex by PAM-guided assembly and pre-designed DNA/RNA hybridization. After loading the sgRNA/Cas9 complex, the DNA origami can be further rolled up by the locking strands with a disulfide bond. With the incorporation of DNA aptamer and influenza hemagglutinin (HA) peptide, the cargo-loaded DNA origami can realize the targeted delivery and effective endosomal escape. After reduction by GSH, the opened DNA origami can release the sgRNA/Cas9 complex by RNase H cleavage to achieve a pronounced gene editing of a tumor-associated gene for gene therapy in vivo. This rationally developed DNA origami-based gene editing system presents a new avenue for the development of gene therapy.

A DNA Origami-based Bactericide for Efficient Healing of Infected Wounds

Bacteria infection is a significant obstacle in the clinical treatment of exposed wounds facing widespread pathogens. Herein, we report a DNA origami-based bactericide for efficient anti-infection therapy of infected wounds in vivo. In our design, abundant DNAzymes (G4/hemin) can be precisely organized on the DNA origami for controllable generation of reactive oxygen species (ROS) to break bacterial membranes. After the destruction of the membrane, broad-spectrum antibiotic levofloxacin (LEV, loaded in the DNA origami through interaction with DNA duplex) can be easily delivered into the bacteria for successful sterilization. With the incorporation of DNA aptamer targeting bacterial peptidoglycan, the DNA origami-based bactericide can achieve targeted and combined antibacterial therapy for efficiently promoting the healing of infected wounds. This tailored DNA origami-based nanoplatform provides a new strategy for the treatment of infectious diseases in vivo.

Exploring the diverse biomedical applications of programmable and multifunctional DNA nanomaterials

DNA nanoparticles hold great promise for a range of biological applications, including the development of cutting-edge treatments and diagnostic tests. Their subnanometer-level addressability enables precise, specific modifications with a variety of chemical and biological entities, making them ideal as diagnostic instruments and carriers for targeted delivery. This paper focuses on the potential of DNA nanomaterials, which offer scalability, programmability, and functionality. For example, they can be engineered to provide highly specific biosensing and bioimaging capabilities and show promise as a platform for disease diagnosis and treatment. Successful operation of various biomedical nanomaterials has been demonstrated both in vitro and in vivo. However, there are still significant challenges to overcome, including the need to improve the scalability and reliability of the technology, and to ensure safety in clinical applications. We discuss these challenges and opportunities in detail and highlight the progress and prospects of DNA nanotechnology for biomedical applications.

Mechanics of dynamic and deformable DNA nanostructures

In DNA nanotechnology, DNA molecules are designed, engineered, and assembled into arbitrary-shaped architectures with predesigned functions. Static DNA assemblies often have delicate designs with structural rigidity to overcome thermal fluctuations. Dynamic structures reconfigure in response to external cues, which have been explored to create functional nanodevices for environmental sensing and other applications. However, the precise control of reconfiguration dynamics has been a challenge due partly to flexible single-stranded DNA connections between moving parts. Deformable structures are special dynamic constructs with deformation on double-stranded parts and single-stranded hinges during transformation. These structures often have better control in programmed deformation. However, related deformability and mechanics including transformation mechanisms are not well understood or documented. In this review, we summarize the development of dynamic and deformable DNA nanostructures from a mechanical perspective. We present deformation mechanisms such as single-stranded DNA hinges with lock-and-release pairs, jack edges, helicity modulation, and external loading. Theoretical and computational models are discussed for understanding their associated deformations and mechanics. We elucidate the pros and cons of each model and recommend design processes based on the models. The design guidelines should be useful for those who have limited knowledge in mechanics as well as expert DNA designers.

Size-Controlled DNA Tile Self-Assembly Nanostructures Through Caveolae-Mediated Endocytosis for Signal-Amplified Imaging of MicroRNAs in Living Cells

Signal-amplified imaging of microRNAs (miRNAs) is a promising strategy at the single-cell level because liquid biopsy fails to reflect real-time dynamic miRNA levels. However, the internalization pathways for available conventional vectors predominantly involve endo-lysosomes, showing nonideal cytoplasmic delivery efficiency. In this study, size-controlled 9-tile nanoarrays are designed and constructed by integrating catalytic hairpin assembly (CHA) with DNA tile self-assembly technology to achieve caveolae-mediated endocytosis for the amplified imaging of miRNAs in a complex intracellular environment. Compared with classical CHA, the 9-tile nanoarrays possess high sensitivity and specificity for miRNAs, achieve excellent internalization efficiency by caveolar endocytosis, bypassing lysosomal traps, and exhibit more powerful signal-amplified imaging of intracellular miRNAs. Because of their excellent safety, physiological stability, and highly efficient cytoplasmic delivery, the 9-tile nanoarrays can realize real-time amplified monitoring of miRNAs in various tumor and identical cells of different periods, and imaging effects are consistent with the actual expression levels of miRNAs, ultimately demonstrating their feasibility and capacity. This strategy provides a high-potential delivery pathway for cell imaging and targeted delivery, simultaneously offering a meaningful reference for the application of DNA tile self-assembly technology in relevant fundamental research and medical diagnostics.

Recent Advances in DNA Origami-Engineered Nanomaterials and Applications

DNA nanotechnology is a unique field, where physics, chemistry, biology, mathematics, engineering, and materials science can elegantly converge. Since the original proposal of Nadrian Seeman, significant advances have been achieved in the past four decades. During this glory time, the DNA origami technique developed by Paul Rothemund further pushed the field forward with a vigorous momentum, fostering a plethora of concepts, models, methodologies, and applications that were not thought of before. This review focuses on the recent progress in DNA origami-engineered nanomaterials in the past five years, outlining the exciting achievements as well as the unexplored research avenues. We believe that the spirit and assets that Seeman left for scientists will continue to bring interdisciplinary innovations and useful applications to this field in the next decade.

Center backbone-rigidified DNA polygonal nanostructures and bottom face-templated polyhedral pyramids with structural stability in a complex biological medium

Due to the sequence programmability, good biocompatibility, versatile functionalities and vast sequence space, DNA oligonucleotides are considered to be ideal building blocks for the assembly of diverse nanostructures in one, two and three dimensions that are capable of engineering of multiple functional nucleic acids into a useful tool to implement intended tasks in biological and medical field. However, the construction of wireframe nanostructures consisting of only a few DNA strands remains quite challenging mainly because of the molecular flexibility-based uncontrollability of size and shape. In this contribution, utilizing gel electrophoretic analysis and atomic force microscopy, we demonstrate the modeling assembly technique for the construction of wireframe DNA nanostructures that can be divided into two categories: rigid center backbone-guided modeling (RBM) and bottom face-templated assembly (BTA) that are responsible for the construction of DNA polygons and polyhedral pyramids, respectively. The highest assembly efficiency (AE) is about 100%, while the lowest AE is not less than 50%. Moreover, when adding one edge for polygons or one side face for pyramids, we only need to add one oligonucleotide strand. Especially, the advanced polygons (e.g., pentagon and hexagon) of definite shape are for the first time constructed. Along this line, introduction of cross-linking strands enables the hierarchical assembly of polymer polygons and polymer pyramids. These wireframe DNA nanostructures exhibit the substantially enhanced resistance to nuclease degradation and maintain their structural integrity in fetal bovine serum for several hours even if the vulnerable nicks are not sealed. The proposed modeling assembly technique represents important progress toward the development of DNA nanotechnology and is expected to promote the application of DNA nanostructures in biological and biomedical fields. STATEMENT OF SIGNIFICANCE: DNA oligonucleotides are considered to be ideal building blocks for the assembly of diverse nanostructures. However, the construction of wireframe nanostructures consisting of only a few DNA strands remains quite challenging. In this contribution, we demonstrate the modeling technique for the construction of different wireframe DNA nanostructures: rigid center backbone-guided modeling (RBM) and bottom face-templated assembly (BTA) that are responsible for the assembly of DNA polygons and polyhedral pyramids, respectively. Moreover, cross-linking strands enables the hierarchical assembly of polymer polygons and polymer pyramids. These wireframe DNA nanostructures exhibit the substantially enhanced resistance to nuclease degradation and maintain their structural integrity in fetal bovine serum for several hours, promoting the application of DNA nanostructures in biological and biomedical fields.

Nucleic acid nanostructures for in vivo applications: The influence of morphology on biological fate

The development of programmable biomaterials for use in nanofabrication represents a major advance for the future of biomedicine and diagnostics. Recent advances in structural nanotechnology using nucleic acids have resulted in dramatic progress in our understanding of nucleic acid-based nanostructures (NANs) for use in biological applications. As the NANs become more architecturally and functionally diverse to accommodate introduction into living systems, there is a need to understand how critical design features can be controlled to impart desired performance in vivo. In this review, we survey the range of nucleic acid materials utilized as structural building blocks (DNA, RNA, and xenonucleic acids), the diversity of geometries for nanofabrication, and the strategies to functionalize these complexes. We include an assessment of the available and emerging characterization tools used to evaluate the physical, mechanical, physiochemical, and biological properties of NANs in vitro. Finally, the current understanding of the obstacles encountered along the in vivo journey is contextualized to demonstrate how morphological features of NANs influence their biological fates. We envision that this summary will aid researchers in the designing novel NAN morphologies, guide characterization efforts, and design of experiments and spark interdisciplinary collaborations to fuel advancements in programmable platforms for biological applications.

Self-assembly of alkyl-perylenebisdiimide-DNA amphiphiles and control of their morphology through cyclodextrin-based host-guest interaction

Amphiphilic alkyl-perylenebisdiimide-DNA hybrids self-assemble into spherical micelles and transform into nanofibers upon the addition of β-cyclodextrins due to host-guest interaction. A competitive guest can induce the nanofibers to reversibly change back to spherical micelles. Both spherical micelles and nanofibers can anchor functional molecules at the corona through DNA hybridization.

DNA nanotechnology in the undergraduate laboratory: Electrophoretic analysis of DNA nanostructure biostability

The field of DNA nanotechnology has grown rapidly in the last decade and has expanded to multiple laboratories. While lectures in DNA nanotechnology have been introduced in some institutions, laboratory components at the undergraduate level are still lacking. Undergraduate students predominantly learn about DNA nanotechnology through their involvement as interns in research laboratories. The DNA nanostructure biostability analysis experiment presented here can be used as a hands-on introductory laboratory exercise for discussing concepts in DNA nanotechnology in an undergraduate setting. This experiment discusses biostability, gel electrophoresis and quantitative analysis of nuclease degradation of a model DNA nanostructure, the paranemic crossover (PX) DNA motif. The experiment can be performed in a chemistry, biology or a biochemistry laboratory with minimal costs and can be adapted in undergraduate institutions using the instructor and student manuals provided here. Laboratory courses based on cutting edge research not only provide students a direct hands-on approach to the subject, but can also increase undergraduate student participation in research. Moreover, laboratory courses that reflect the increasingly multidisciplinary nature of research add value to undergraduate education.

A single strand: A simplified approach to DNA origami

Just as a single polypeptide strand can self-fold into a complex 3D structure, a single strand of DNA can self-fold into DNA origami. Most DNA origami structures (i.e., the scaffold-staple and DNA tiling systems) utilize hundreds of short single-stranded DNA. As such, these structures come with challenges inherent to intermolecular construction. Many assembly challenges involving intermolecular interactions can be resolved if the origami structure is constructed from one DNA strand, where folding is not concentration dependent, the folded structure is more resistant to nuclease degradation, and the synthesis can be achieved at an industrial scale at a thousandth of the cost. This review discusses the design principles and considerations employed in single-stranded DNA origami and its potential benefits and drawbacks.

The wending rhombus: Self-assembling 3D DNA crystals

In this perspective, we provide a summary of recent developments in self-assembling three-dimensional (3D) DNA crystals. Starting from the inception of this subfield, we describe the various advancements in structure that have led to an increase in the diversity of macromolecular crystal motifs formed through self-assembly, and we further comment on the future directions of the field, which exploit noncanonical base pairing interactions beyond Watson-Crick. We then survey the current applications of self-assembling 3D DNA crystals in reversibly active nanodevices and materials engineering and provide an outlook on the direction researchers are taking these structures. Finally, we compare 3D DNA crystals with DNA origami and suggest how these distinct subfields might work together to enhance biomolecule structure solution, nanotechnological motifs, and their applications.

Homologous pairing in short double-stranded DNA-grafted colloidal microspheres

Homologous pairing (HP), i.e., the pairing of similar or identical double-stranded DNA, is an insufficiently understood fundamental biological process. HP is now understood to also occur without protein mediation, but crucial mechanistic details remain poorly established. Unfortunately, systematic studies of sequence dependence are not practical due to the enormous number of nucleotide permutations and multiple possible conformations involved in existing biophysical strategies even when using as few as 150 basepairs. Here, we show that HP can occur in DNA as short as 18 basepairs in a colloidal microparticle-based system. Exemplary systematic studies include resolving opposing reports of the impact of % AT composition, validating the impact of nucleotide order and triplet framework and revealing isotropic bendability to be crucial for HP. These studies are enabled by statistical analysis of crystal size and fraction within coexisting fluid-crystal phases of double-stranded DNA-grafted colloidal microspheres, where crystallization is predicated by HP.

Advances in regenerative medicine applications of tetrahedral framework nucleic acid-based nanomaterials: an expert consensus recommendation

With the emergence of DNA nanotechnology in the 1980s, self-assembled DNA nanostructures have attracted considerable attention worldwide due to their inherent biocompatibility, unsurpassed programmability, and versatile functions. Especially promising nanostructures are tetrahedral framework nucleic acids (tFNAs), first proposed by Turberfield with the use of a one-step annealing approach. Benefiting from their various merits, such as simple synthesis, high reproducibility, structural stability, cellular internalization, tissue permeability, and editable functionality, tFNAs have been widely applied in the biomedical field as three-dimensional DNA nanomaterials. Surprisingly, tFNAs exhibit positive effects on cellular biological behaviors and tissue regeneration, which may be used to treat inflammatory and degenerative diseases. According to their intended application and carrying capacity, tFNAs could carry functional nucleic acids or therapeutic molecules through extended sequences, sticky-end hybridization, intercalation, and encapsulation based on the Watson and Crick principle. Additionally, dynamic tFNAs also have potential applications in controlled and targeted therapies. This review summarized the latest progress in pure/modified/dynamic tFNAs and demonstrated their regenerative medicine applications. These applications include promoting the regeneration of the bone, cartilage, nerve, skin, vasculature, or muscle and treating diseases such as bone defects, neurological disorders, joint-related inflammatory diseases, periodontitis, and immune diseases.

Dynamic Catalysis Guided by Nucleic Acid Networks and DNA Nanostructures

Nucleic acid networks conjugated to native enzymes and supramolecular DNA nanostructures modified with enzymes or DNAzymes act as functional reaction modules for guiding dynamic catalytic transformations. These systems are exemplified with the assembly of constitutional dynamic networks (CDNs) composed of nucleic acid-functionalized enzymes, as constituents, undergoing triggered structural reconfiguration, leading to dynamically switched biocatalytic cascades. By coupling two nucleic acid/enzyme networks, the intercommunicated feedback-driven dynamic biocatalytic operation of the system is demonstrated. In addition, the tailoring of a nucleic acid/enzyme reaction network driving a dissipative, transient, biocatalytic cascade is introduced as a model system for out-of-equilibrium dynamically modulated biocatalytic transformation in nature. Also, supramolecular nucleic acid machines or DNA nanostructures, modified with DNAzyme or enzyme constituents, act as functional reaction modules driving temporal dynamic catalysis. The design of dynamic supramolecular machines is exemplified with the introduction of an interlocked two-ring catenane device that is dynamically reversibly switched between two states operating two different DNAzymes, and with the tailoring of a DNA-tweezers device functionalized with enzyme/DNAzyme constituents that guides the dynamic ON/OFF operation of a biocatalytic cascade by opening and closing the molecular device. In addition, DNA origami nanostructures provide functional scaffolds for the programmed positioning of enzymes or DNAzyme for the switchable operation of catalytic transformations. This is introduced by the tailored functionalization of the edges of origami tiles with nucleic acids guiding the switchable formation of DNAzyme catalysts through the dimerization/separation of the tiles. In addition, the programmed deposition of two-enzyme/cofactor constituents on the origami raft allowed the dynamic photochemical activation of the cofactor-mediated biocatalytic cascade on the spatially biocatalytic assembly on the scaffold. Furthermore, photoinduced "mechanical" switchable and reversible unlocking and closing of nanoholes in the origami frameworks allow the "ON" and "OFF" operation of DNAzyme units in the nanoholes, confined environments. The future challenges and potential applications of dynamic nucleic acid/enzyme and DNAzyme conjugates are discussed in the conclusion paragraph.

Nucleic acid paranemic structures: a promising building block for functional nanomaterials in biomedical and bionanotechnological applications

Over the past few decades, DNA has been recognized as a powerful self-assembling material capable of crafting supramolecular nanoarchitectures with quasi-angstrom precision, which promises various applications in the fields of materials science, nanoengineering, and biomedical science. Notable structural features include biocompatibility, biodegradability, high digital encodability by Watson-Crick base pairing, nanoscale dimension, and surface addressability. Bottom-up fabrication of complex DNA nanostructures relies on the design of fundamental DNA motifs, including parallel (PX) and antiparallel (AX) crossovers. However, paranemic or PX motifs have not been thoroughly explored for the construction of DNA-based nanostructures compared to AX motifs. In this review, we summarize the developments of PX-based DNA nanostructures, highlight the advantages as well as challenges of PX-based assemblies, and give an overview of the structural and chemical features that lend their utilization in a variety of applications. The works presented cover PX-based DNA nanostructures in biological systems, dynamic systems, and biomedical contexts. The possible future advances of PX structures and applications are also summarized, discussed, and postulated.

The interactions between DNA nanostructures and cells: A critical overview from a cell biology perspective

DNA nanotechnology has yielded remarkable advances in  composite materials with diverse applications in biomedicine. The specificity and predictability of building 3D structures at the nanometer scale make DNA nanotechnology a promising tool for uses in biosensing, drug delivery, cell modulation, and bioimaging. However, for successful translation of DNA nanostructures to real-world applications, it is crucial to understand how they interact with living cells, and the consequences of such interactions. In this review, we summarize the current state of knowledge on the interactions of DNA nanostructures with cells. We identify key challenges, from a cell biology perspective, that influence progress towards the clinical translation of DNA nanostructures. We close by providing an outlook on what questions must be addressed to accelerate the clinical translation of DNA nanostructures. STATEMENT OF SIGNIFICANCE: Self-assembled DNA nanostructures (DNs) offers unique opportunities to overcome persistent challenges in the nanobiotechnology field. However, the interactions between engineered DNs and living cells are still not well defined. Critical systematization of current cellular models and biological responses triggered by DNs is a crucial foundation for the successful clinical translation of DNA nanostructures. Moreover, such an analysis will identify the pitfalls and challenges that are present in the field, and provide a basis for overcoming those challenges.

Construction of a Reduction-responsive DNA Microsphere using a Reduction-cleavable Spacer based on a Nitrobenzene Scaffold

Here, we describe the design and synthesis of a new reduction-cleavable spacer (RCS) based on a nitrobenzene scaffold for constructing reduction-responsive oligonucleotides according to standard phosphoramidite chemistry. In addition, we demonstrate that the introduction of the RCS in the middle of an oligonucleotide (30 nt) enables the construction of a self-assembled microsphere capable of exhibiting a reduction-responsive disassembly.

Programming 2D Supramolecular Assemblies with Wireframe DNA Origami

Wireframe DNA origami offers the ability to program nearly arbitrary 2D and 3D nanoscale geometries, with six-helix bundle (6HB) edge designs providing both geometric versatility and fidelity with respect to the target origami shape. Because individual DNA origami objects are limited in size by the length of the DNA scaffold, here, we introduce a hierarchical self-assembly strategy to overcome this limitation by programming supramolecular assemblies and periodic arrays using wireframe DNA origami objects as building blocks. Parallel half-crossovers are used together with lateral cohesive interactions between staples and the scaffold to introduce symmetry into supramolecular assemblies constructed from single DNA origami units that cannot be self-assembled directly using base-stacking or conventional antiparallel crossover designs. This hierarchical design approach can be applied readily to 2D wireframe DNA origami designed using the top-down sequence design strategy METIS without any prerequisites on scaffold and staple routing. We demonstrate the utility of our strategy by fabricating dimers and self-limiting hexameric superstructures using both triangular and hexagonal wireframe origami building blocks. We generalize our self-assembly approach to fabricate close-packed and non-close-packed periodic 2D arrays. Visualization using atomic force microscopy and transmission electron microscopy demonstrates that superstructures exhibit similar structural integrity to that of the individual origami building blocks designed using METIS. Our results offer a general platform for the design and fabrication of 2D materials for a variety of applications.

Nucleic Acids and Their Analogues for Biomedical Applications

Nucleic acids are emerging as powerful and functional biomaterials due to their molecular recognition ability, programmability, and ease of synthesis and chemical modification. Various types of nucleic acids have been used as gene regulation tools or therapeutic agents for the treatment of human diseases with genetic disorders. Nucleic acids can also be used to develop sensing platforms for detecting ions, small molecules, proteins, and cells. Their performance can be improved through integration with other organic or inorganic nanomaterials. To further enhance their biological properties, various chemically modified nucleic acid analogues can be generated by modifying their phosphodiester backbone, sugar moiety, nucleobase, or combined sites. Alternatively, using nucleic acids as building blocks for self-assembly of highly ordered nanostructures would enhance their biological stability and cellular uptake efficiency. In this review, we will focus on the development and biomedical applications of structural and functional natural nucleic acids, as well as the chemically modified nucleic acid analogues over the past ten years. The recent progress in the development of functional nanomaterials based on self-assembled DNA-based platforms for gene regulation, biosensing, drug delivery, and therapy will also be presented. We will then summarize with a discussion on the advanced development of nucleic acid research, highlight some of the challenges faced and propose suggestions for further improvement.

Chemically Modified DNA Nanostructures for Drug Delivery

Based on predictable, complementary base pairing, DNA can be artificially pre-designed into versatile DNA nanostructures of well-defined shapes and sizes. With excellent addressability and biocompatibility, DNA nanostructures have been widely employed in biomedical research, such as bio-sensing, bio-imaging, and drug delivery. With the development of the chemical biology of nucleic acid, chemically modified nucleic acids are also gradually developed to construct multifunctional DNA nanostructures. In this review, we summarize the recent progress in the construction and functionalization of chemically modified DNA nanostructures. Their applications in the delivery of chemotherapeutic drugs and nucleic acid drugs are highlighted. Furthermore, the remaining challenges and future prospects in drug delivery by chemically modified DNA nanostructures are discussed.

•

With excellent addressability and biocompatibility, DNA nanostructures are promising candidates for bio-sensing, bio-imaging, and drug delivery

•

The recent progress in chemical modifications of DNA nanostructures is summarized

•

Chemically modified DNA nanostructures for efficient delivery of chemotherapeutic drugs and nucleic acid drugs are highlighted

•

Challenges and prospects of future development toward chemically modified DNA nanostructures for drug delivery are discussed

Structural DNA nanotechnology: Immobile Holliday junctions to artificial robots

DNA nanotechnology marvels the scientific world with its capabilities to design, engineer, and demonstrate nanoscale shapes. This review is a condensed version walking the reader through the structural developments in the field over the past 40 years starting from the basic design rules of the double-stranded building block to the most recent advancements in self-assembled hierarchically achieved structures to date. It builds off from the fundamental motivation of building 3-dimensional (3D) lattice structures of tunable cavities going all the way up to artificial nanorobots fighting cancer. The review starts by covering the most important developments from the fundamental bottom-up approach of building structures, which is the 'tile' based approach covering 1D, 2D, and 3D building blocks, after which, the top-down approach using DNA origami and DNA bricks is also covered. Thereafter, DNA nanostructures assembled using not so commonly used (yet promising) techniques like i-motifs, quadruplexes, and kissing loops are covered. Highlights from the field of dynamic DNA nanostructures have been covered as well, walking the reader through the various approaches used within the field to achieve movement. The article finally concludes by giving the authors a view of what the future of the field might look like while suggesting in parallel new directions that fellow/future DNA nanotechnologists could think about.

Designer DNA nanostructures for viral inhibition

Emerging viral diseases can substantially threaten national and global public health. Central to our ability to successfully tackle these diseases is the need to quickly detect the causative virus and neutralize it efficiently. Here we present the rational design of DNA nanostructures to inhibit dengue virus infection. The designer DNA nanostructure (DDN) can bind to complementary epitopes on antigens dispersed across the surface of a viral particle. Since these antigens are arranged in a defined geometric pattern that is unique to each virus, the structure of the DDN is designed to mirror the spatial arrangement of antigens on the viral particle, providing very high viral binding avidity. We describe how available structural data can be used to identify unique spatial patterns of antigens on the surface of a viral particle. We then present a procedure for synthesizing DDNs using a combination of in silico design principles, self-assembly, and characterization using gel electrophoresis, atomic force microscopy and surface plasmon resonance spectroscopy. Finally, we evaluate the efficacy of a DDN in inhibiting dengue virus infection via plaque-forming assays. We expect this protocol to take 2-3 d to complete virus antigen pattern identification from existing cryogenic electron microscopy data, ~2 weeks for DDN design, synthesis, and virus binding characterization, and ~2 weeks for DDN cytotoxicity and antiviral efficacy assays.

Protein-mediated DNA self-assembly by controlling the surface charge in a molecular crowding environment

Designing and building artificial nanodevices and nanoarchitectures in living systems are extremely intriguing subjects in nanotechnology and synthetic biology. Taking advantage of cellular machinery and endogenous biomacromolecules, such as proteins,...

Biocatalytic cascades and intercommunicated biocatalytic cascades in microcapsule systems

Dynamic dimerization of GOx-loaded microcapsules with β-gal//hemin/G-quadruplex-bridged T1/T2-loaded microcapsules guides the bi-directional intercommunication of the three catalysts cascade.

DNA Nanodevices: from Mechanical Motions to Biomedical Applications

Inspired by molecular machines in nature, artificial nanodevices have been designed to realize various biomedical functions. Self-assembled deoxyribonucleic acid (DNA) nanostructures that feature designed geometries, excellent spatial accuracy, nanoscale addressability and marked biocompatibility provide an attractive candidate for constructing dynamic nanodevices with biomarker-targeting and stimuli-responsiveness for biomedical applications. Here, a summary of typical construction strategies of DNA nanodevices and their operating mechanisms are presented. We also introduced recent advances in employing DNA nanodevices as platforms for biosensing and intelligent drug delivery. Finally, the broad prospects and main challenges of the DNA nanodevices in biomedical applications are discussed.

Lipids and Lipid Derivatives for RNA Delivery

RNA-based therapeutics have shown great promise in treating a broad spectrum of diseases through various mechanisms including knockdown of pathological genes, expression of therapeutic proteins, and programmed gene editing. Due to the inherent instability and negative-charges of RNA molecules, RNA-based therapeutics can make the most use of delivery systems to overcome biological barriers and to release the RNA payload into the cytosol. Among different types of delivery systems, lipid-based RNA delivery systems, particularly lipid nanoparticles (LNPs), have been extensively studied due to their unique properties, such as simple chemical synthesis of lipid components, scalable manufacturing processes of LNPs, and wide packaging capability. LNPs represent the most widely used delivery systems for RNA-based therapeutics, as evidenced by the clinical approvals of three LNP-RNA formulations, patisiran, BNT162b2, and mRNA-1273. This review covers recent advances of lipids, lipid derivatives, and lipid-derived macromolecules used in RNA delivery over the past several decades. We focus mainly on their chemical structures, synthetic routes, characterization, formulation methods, and structure-activity relationships. We also briefly describe the current status of representative preclinical studies and clinical trials and highlight future opportunities and challenges.

The biological applications of DNA nanomaterials: current challenges and future directions

DNA, a genetic material, has been employed in different scientific directions for various biological applications as driven by DNA nanotechnology in the past decades, including tissue regeneration, disease prevention, inflammation inhibition, bioimaging, biosensing, diagnosis, antitumor drug delivery, and therapeutics. With the rapid progress in DNA nanotechnology, multitudinous DNA nanomaterials have been designed with different shape and size based on the classic Watson-Crick base-pairing for molecular self-assembly. Some DNA materials could functionally change cell biological behaviors, such as cell migration, cell proliferation, cell differentiation, autophagy, and anti-inflammatory effects. Some single-stranded DNAs (ssDNAs) or RNAs with secondary structures via self-pairing, named aptamer, possess the ability of targeting, which are selected by systematic evolution of ligands by exponential enrichment (SELEX) and applied for tumor targeted diagnosis and treatment. Some DNA nanomaterials with three-dimensional (3D) nanostructures and stable structures are investigated as drug carrier systems to delivery multiple antitumor medicine or gene therapeutic agents. While the functional DNA nanostructures have promoted the development of the DNA nanotechnology with innovative designs and preparation strategies, and also proved with great potential in the biological and medical use, there is still a long way to go for the eventual application of DNA materials in real life. Here in this review, we conducted a comprehensive survey of the structural development history of various DNA nanomaterials, introduced the principles of different DNA nanomaterials, summarized their biological applications in different fields, and discussed the current challenges and further directions that could help to achieve their applications in the future.

Structures of artificially designed discrete RNA nanoarchitectures at near-atomic resolution

Although advances in nanotechnology have enabled the construction of complex and functional synthetic nucleic acid–based nanoarchitectures, high-resolution discrete structures are lacking because of the difficulty in obtaining good diffracting crystals. Here, we report the design and construction of RNA nanostructures based on homooligomerizable one-stranded tiles for x-ray crystallographic determination. We solved three structures to near-atomic resolution: a 2D parallelogram, a 3D nanobracelet unexpectedly formed from an RNA designed for a nanocage, and, eventually, a bona fide 3D nanocage designed with the guidance of the two previous structures. Structural details of their constituent motifs, such as kissing loops, branched kissing loops, and T-junctions, that resemble natural RNA motifs and resisted x-ray determination are revealed, providing insights into those natural motifs. This work unveils the largely unexplored potential of crystallography in gaining high-resolution feedback for nanoarchitectural design and suggests a route to investigate RNA motif structures by configuring them into nanoarchitectures.

pH- and miRNA-Responsive DNA-Tetrahedra/Metal-Organic Framework Conjugates: Functional Sense-and-Treat Carriers

The synthesis of stimuli-responsive hybrid structures composed of drug-loaded UiO-66 metal-organic framework nanoparticles, NMOFs, locked by DNA tetrahedra gates is presented. The hybrid systems combine the high loading capacity of drugs in the porous NMOFs and the effective cell permeation properties of the DNA tetrahedra. The nucleic acid-functionalized UiO-66 NMOFs are loaded with drugs (doxorubicin, DOX, or camptothecin, CPT) or with dyes as drug models (Rhodamine 6G or fluorescein) and used to prepare stimuli-responsive carriers. In this study, two different stimuli-responsive NMOFs are presented. One system introduces the drug-loaded NMOFs locked by pH-responsive DNA tetrahedra. At acidic pH values, the gating tetrahedra are dissociated from the NMOFs through the formation of i-motif structures, resulting in the unlocking of the NMOFs and the release of the drugs. In addition, the tetrahedra gates are modified with AS1411 aptamer tethers, and these target the drug-loaded NMOFs to nucleolin receptors overexpressed in certain malignant cells. A second system involves the preparation of NMOFs loaded with drugs/dyes and gated by the microRNA (miRNA)-responsive tetrahedra (miRNA-21 or miRNA-155). In the presence of miRNAs, the dissociation of miRNA-responsive tetrahedra from the NMOFs leads to the unlocking of the NMOFs and the release of the loads. Further developments of the miRNA-responsive tetrahedra-gated hybrid carriers include the following. (i) By appropriate engineering of the miRNA gating units, the exonuclease III (Exo III)-amplified unlocking of the carriers, through the regeneration of the miRNA triggers, and the enhanced release of the loaded drugs are demonstrated. (ii) By applying mixtures of miRNA-21-responsive DNA tetrahedra-gated DOX-loaded NMOFs and miRNA-155-responsive DNA tetrahedra-gated CPT-loaded NMOFs, the multiplexed miRNA-21/miRNA-155-dictated release of the drugs is demonstrated. As compared to the analog DNA duplex-modified NMOFs, DNA tetrahedra-gated, drug-loaded NMOFs permeation into malignant MDA-MB-231 breast cancer cells presents more effective cell permeation. Effective and selective cytotoxicity toward the malignant cells, as compared to nonmalignant epithelial MCF-10A breast cells, is demonstrated due to the acidic pH, present in cancer cells, or the miRNA-21, present in MDA-MB-231 malignant cells.

Nuclease resistance of DNA nanostructures

DNA nanotechnology has progressed from proof-of-concept demonstrations of structural design towards application-oriented research. As a natural material with excellent self-assembling properties, DNA is an indomitable choice for various biological applications, including biosensing, cell modulation, bioimaging and drug delivery. However, a major impediment to the use of DNA nanostructures in biological applications is their susceptibility to attack by nucleases present in the physiological environment. Although several DNA nanostructures show enhanced resistance to nuclease attack compared with duplexes and plasmid DNA, this may be inadequate for practical application. Recently, several strategies have been developed to increase the nuclease resistance of DNA nanostructures while retaining their functions, and the stability of various DNA nanostructures has been studied in biological fluids, such as serum, urine and cell lysates. This Review discusses the approaches used to modulate nuclease resistance in DNA nanostructures and provides an overview of the techniques employed to evaluate resistance to degradation and quantify stability.

Toehold-Mediated Selective Assembly of Compact Discrete DNA Nanostructures

Production of small discrete DNA nanostructures containing covalent junctions requires reliable methods for the synthesis and assembly of branched oligodeoxynucleotide (ODN) conjugates. This study reports an approach for self-assembly of hard-to-obtain primitive discrete DNA nanostructures-"nanoethylenes", dimers formed by double-stranded oligonucleotides using V-shaped furcate blocks. We scaled up the synthesis of V-shaped oligonucleotide conjugates using pentaerythritol-based diazide and alkyne-modified oligonucleotides using copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) and optimized the conditions for "nanoethylene" formation. Next, we designed nanoethylene-based "nanomonomers" containing pendant adapters. They demonstrated smooth and high-yield spontaneous conversion into the smallest cyclic product, DNA tetragon aka "nano-methylcyclobutane". Formation of DNA nanostructures was confirmed using native polyacrylamide gel electrophoresis (PAGE) and atomic force microscopy (AFM) and additionally studied by molecular modeling. The proposed facile approach to discrete DNA nanostructures using precise adapter-directed association expands the toolkit for the realm of DNA origami.

Supramolecular Architectures of Nucleic Acid/Peptide Hybrids

Supramolecular architectures that are built artificially from biomolecules, such as nucleic acids or peptides, with structural hierarchical orders ranging from the molecular to nano-scales have attracted increased attention in molecular science research fields. The engineering of nanostructures with such biomolecule-based supramolecular architectures could offer an opportunity for the development of biocompatible supramolecular (nano)materials. In this review, we highlighted a variety of supramolecular architectures that were assembled from both nucleic acids and peptides through the non-covalent interactions between them or the covalently conjugated molecular hybrids between them.

Nuclease Degradation Analysis of DNA Nanostructures Using Gel Electrophoresis

Custom-built DNA nanostructures are now used in applications such as biosensing, molecular computation, biomolecular analysis, and drug delivery. While the functionality and biocompatibility of DNA makes DNA nanostructures useful in such applications, the field faces a challenge in making biostable DNA nanostructures. Being a natural material, DNA is most suited for biological applications, but is also easily degraded by nucleases. Several methods have been employed to study the nuclease degradation rates and enhancement of nuclease resistance. This protocol describes the use of gel electrophoresis to analyze the extent of nuclease degradation of DNA nanostructures and to report degradation times, kinetics of nuclease digestion, and evaluation of biostability enhancement factors. © 2020 Wiley Periodicals LLC. Basic Protocol: Timed analysis of nuclease degradation of DNA nanostructures Support Protocol: Calculating biostability enhancement factors.

DNA Tetrahedra Modules as Versatile Optical Sensing Platforms for Multiplexed Analysis of miRNAs, Endonucleases, and Aptamer-Ligand Complexes

The sensing modules for analyzing miRNAs or the endonucleases consist of tetrahedra functionalized with three different fluorophore-quencher pairs in spatially quenched configurations and hairpin units acting as recognition elements for the analytes. Three different miRNAs (miRNA-21, miRNA-221, and miRNA-155) or three different endonucleases (Nt.BbvCI, EcoRI, and HindIII) uncage the respective hairpins, leading to the switched-on fluorescence of the respective fluorophores and to the multiplex detection of the respective analytes. In addition, a tetrahedron module for the multiplexed analysis of aptamer ligand complexes (ligands = ATP, thrombin, VEGF) is introduced. The module includes edges modified with three spatially separated fluorophore-quencher pairs that were stretched by the respective aptamer strands to yield a switched-on fluorescent state. Formation of the respective aptamer ligands reconfigures the edges into fluorophore-quenched caged-hairpin structures that enable the multiplexed analysis of the aptamer-ligand complexes. The facile permeation of the tetrahedra structures into cells is used for the imaging of MCF-7 and HepG2 cancer cells and their discrimination from normal epithelial MCF-10A breast cells.

Braiding Ultrathin Au Nanowires into Ropes

Braiding is a common skill in daily life but rare at the nanoscale. Most of the current nanohelices are directly grown or assembled without involving mechanical interactions, and they are thus distinctively different from ropes in terms of functions and mechanisms. Here, by coaxially twisting multiple ultrathin Au nanowires, nanoropes are synthesized with elegant helical patterns that are consistent with the macroscopic equivalents. The strain relaxation of lattice transformation causes the nanowires to pursue the maximum degree of twisting, while the mutual packing interactions in a bundle prevent sideways emergence of U-turns. The consistent chirality of the seemingly independent strands can only arise when a first twisting strand causes morphological deformation in its neighbors, which induces the collective uni-directional twisting. The spontaneous braiding and the "remote" control of the nanowires involve mechanical interactions and possibly energy transmission, thus opening doors to chiral assembly and future smart nanodevices.

Exceptional Nuclease Resistance of Paranemic Crossover (PX) DNA and Crossover-Dependent Biostability of DNA Motifs

Nanometer-sized features and molecular recognition properties make DNA a useful material for nanoscale construction, but degradation in biological fluids poses a considerable roadblock to biomedical applications of DNA nanotechnology. Here, we report the remarkable biostability of a multistranded motif called paranemic crossover (PX) DNA. Compared to double stranded DNA, PX DNA has dramatically enhanced (sometimes >1000 fold) resistance to degradation by four different nucleases, bovine and human serum, and human urine. We trace the cause of PX's biostability to DNA crossovers, showing a continuum of protection that scales with the number of crossovers. These results suggest that enhanced biostability can be engineered into DNA nanostructures by adopting PX-based architectures or by strategic crossover placement.

Biotechnological and Therapeutic Applications of Natural Nucleic Acid Structural Motifs

Genetic information and the blueprint of life are stored in the form of nucleic acids. The primary sequence of DNA, read from the canonical double helix, provides the code for RNA and protein synthesis. Yet these already-information-rich molecules have higher-order structures which play critical roles in transcription and translation. Uncovering the sequences, parameters, and conditions which govern the formation of these structural motifs has allowed researchers to study them and to utilize them in biotechnological and therapeutic applications in vitro and in vivo. This review covers both DNA and RNA structural motifs found naturally in biological systems including catalytic nucleic acids, non-coding RNA, aptamers, G-quadruplexes, i-motifs, and Holliday junctions. For each category, an overview of the structural characteristics, biological prevalence, and function will be discussed. The biotechnological and therapeutic applications of these structural motifs are highlighted. Future perspectives focus on the addition of proteins and unnatural modifications to enhance structural stability for greater applicability.

Patterning Porous Networks through Self-Assembly of Programmed Biomacromolecules

Two-dimensional (2D) porous networks are of great interest for the fabrication of complex organized functional materials for potential applications in nanotechnologies and nanoelectronics. This review aims at providing an overview of bottom-up approaches towards the engineering of 2D porous networks by using biomacromolecules, with a particular focus on nucleic acids and proteins. The first part illustrates how the advancements in DNA nanotechnology allowed for the attainment of complex ordered porous two-dimensional DNA nanostructures, thanks to a biomimetic approach based on DNA molecules self-assembly through specific hydrogen-bond base pairing. The second part focuses the attention on how polypeptides and proteins structural properties could be used to engineer organized networks templating the formation of multifunctional materials. The structural organization of all examples is discussed as revealed by scanning probe microscopy or transmission electron microscopy imaging techniques.

Triggered Interconversion of Dynamic Networks Composed of DNA-Tetrahedra Nanostructures

Constitutional dynamic networks (CDNs) consisting of DNA tetrahedra allow the dynamically triggered adaptive control over the compositions and structures of the constituents. In one system, a CDN consisting of four tetrahedra constituents is orthogonally triggered by two alternative triggers, T₁ or T₂, to reconfigure into two different CDNs, revealing adaptive control-over the tetrahedra compositions in the two CDNs. In the presence of the counter triggers T₁' or T₂', the parent CDN is regenerated. In the second system, the assembly of a CDN consisting of four dimeric tetrahedra exhibiting variable sizes and shapes is described. The orthogonal triggering of the CDN by two different triggers T₃ or T₄, leads to the adaptive reconfiguration of the CDN into new equilibrated CDNs exhibiting control-over the compositions and shapes of the dimeric tetrahedra comprising the CDNs. Mg²⁺-ion-dependent DNAzyme units conjugated to the tetrahedra nanostructures and complementary electrophoretic experiments provide means to quantitatively evaluate the compositions of the different CDN systems. By the functionalization of the four-tetrahedra-based CDN system with two fluorophor donor-acceptor pairs and the orthogonal reconfiguration of the CDN in the presence of two alternative triggers, the control-over the FRET functions of the CDN systems is demonstrated.

Metal-Modified Nucleic Acids: Metal-Mediated Base Pairs, Triples, and Tetrads

The incorporation of metal ions into nucleic acids by means of metal-mediated base pairs represents a promising and prominent strategy for the site-specific decoration of these self-assembling supramolecules with metal-based functionality. Over the past 20 years, numerous nucleoside surrogates have been introduced in this respect, broadening the metal scope by providing perfectly tailored metal-binding sites. More recently, artificial nucleosides derived from natural purine or pyrimidine bases have moved into the focus of Ag^I -mediated base pairing, due to their expected compatibility with regular Watson-Crick base pairs. This minireview summarizes these advances in metal-mediated base pairing but also includes further recent progress in the field. Moreover, it addresses other aspects of metal-modified nucleic acids, highlighting an expansion of the concept to metal-mediated base triples (in triple helices and three-way junctions) and metal-mediated base tetrads (in quadruplexes). For all types of metal-modified nucleic acids, proposed or accomplished applications are briefly mentioned, too.