Cocatalysts for Selective Photoreduction of CO2 into Solar Fuels

g-C3N4 as ballistic electron transport "Tunnel" in CsPbBr3-based ternary photocatalyst for gas phase CO2 reduction

Perovskite CsPbBr3 quantum dot shows great potential in artificial photosynthesis, attributed to its outstanding optoelectronic properties. Nevertheless, its photocatalytic activity is hindered by insufficient catalytic active sites and severe charge recombination. In this work, a CsPbBr3@Ag-C3N4 ternary heterojunction photocatalyst is designed and synthesized for high-efficiency CO2 reduction. The CsPbBr3 quantum dots and Ag nanoparticles are chemically anchored on the surface of g-C3N4 sheets, forming an electron transfer tunnel from CsPbBr3 quantum dots to Ag nanoparticles via g-C3N4 sheets. The resulting CsPbBr3@Ag-C3N4 ternary photocatalyst, with spatial separation of photogenerated carriers, achieves a remarkable conversion rate of 19.49 μmol·g-1·h-1 with almost 100 % CO selectivity, a 3.13-fold enhancement in photocatalytic activity as compared to CsPbBr3 quantum dots. Density functional theory calculations reveal the rapid CO2 adsorption/activation and the decreased free energy (0.66 eV) of *COOH formation at the interface of Ag nanoparticles and g-C3N4 in contrast to the g-C3N4, leading to the excellent photocatalytic activity, while the thermodynamically favored CO desorption contributes to the high CO selectivity. This work presents an innovative strategy of constructing perovskite-based photocatalyst by modulating catalyst structure and offers profound insights for efficient CO2 conversion.

Enhancing photocatalytic CO2 reduction with TiO2-based materials: Strategies, mechanisms, challenges, and perspectives

The concentration of atmospheric CO2 has exceeded 400 ppm, surpassing its natural variability and raising concerns about uncontrollable shifts in the carbon cycle, leading to significant climate and environmental impacts. A promising method to balance carbon levels and mitigate atmospheric CO2 rise is through photocatalytic CO2 reduction. Titanium dioxide (TiO2), renowned for its affordability, stability, availability, and eco-friendliness, stands out as an exemplary catalyst in photocatalytic CO2 reduction. Various strategies have been proposed to modify TiO2 for photocatalytic CO2 reduction and improve catalytic activity and product selectivity. However, few studies have systematically summarized these strategies and analyzed their advantages, disadvantages, and current progress. Here, we comprehensively review recent advancements in TiO2 engineering, focusing on crystal engineering, interface design, and reactive site construction to enhance photocatalytic efficiency and product selectivity. We discuss how modifications in TiO2's optical characteristics, carrier migration, and active site design have led to varied and selective CO2 reduction products. These enhancements are thoroughly analyzed through experimental data and theoretical calculations. Additionally, we identify current challenges and suggest future research directions, emphasizing the role of TiO2-based materials in understanding photocatalytic CO2 reduction mechanisms and in designing effective catalysts. This review is expected to contribute to the global pursuit of carbon neutrality by providing foundational insights into the mechanisms of photocatalytic CO2 reduction with TiO2-based materials and guiding the development of efficient photocatalysts.

Constructing copper Phthalocyanine/Molybdenum disulfide (CuPc/MoS2) S-scheme heterojunction with S-rich vacancies for enhanced Visible-Light photocatalytic CO2 reduction

Constructing a heterojunction by combining two semiconductors with similar band structures is a successful approach to obtaining photocatalysts with high efficiency. Herein, a CuPc/DR-MoS2 heterojunction involving copper phthalocyanine (CuPc) and molybdenum disulfide with S-rich vacancies (13.66%) is successfully prepared by the facile hydrothermal method. Experimental results and theoretical calculations firmly demonstrated that photoelectrons exhibit an S-scheme charge transfer mechanism in the CuPc/DR-MoS2 heterojunction. The S-scheme heterojunction system has proven significant advantages in promoting the charge separation and transfer of photogenerated carriers, enhancing visible-light responsiveness, and achieving robust photoredox capability. As a result, the optimized 3CuPc/DR-MoS2 S-scheme heterojunction exhibits photocatalytic yields of CO and CH4 at 200 and 111.6 μmol g-1h-1, respectively. These values are four times and 4.5 times greater than the photocatalytic yields of pure DR-MoS2. This study offers novel perspectives on the advancement of innovative and highly effective heterojunction photocatalysts.

Surface CN bonds mediate photocatalytic CO2 reduction into efficient CH4 production in TiO2-decorated g-C3N4 nanosheets

Graphitic carbon nitride (g-C3N4, CN) has garnered considerable attention in the field of photocatalysis due to its favorable band gap and high specific surface area. However, its primary practical limitation lies in the strong radiative recombination of lone pair (LP) electronic states, leading to limited efficiency in separating photogenerated carriers and subsequently diminishing photocatalytic performance. In this study, we devised and synthesized a heterojunction photocatalytic system comprising TiO2 nanosheets supported on modified g-C3N4 (MCN), designated as MCN/TiO2. The presence of CN functional groups on the tri-s-triazine nitrogen captures photogenerated electrons by modifying LP electronic states, resulting in a reduction in the fluorescence emission intensity of g-C3N4. Simultaneously, it forms chemical bonds with the supported TiO2 nanosheets, creating an efficient electron transfer pathway for the accumulation of photogenerated electrons at the active Ti sites. Experimentally, the MCN/TiO2 photocatalytic system exhibited optimal performance in CO2 reduction. The CH4 production rate reached 26.59 μmol g-1 h-1, surpassing that of TiO2 and CN/TiO2 by approximately 8 and 3 times, respectively. Furthermore, this photocatalytic system demonstrated exceptional photostability over five cycles, each lasting 4 h. This research offers a valuable approach for the efficient separation and transfer of photogenerated carriers in composite materials based on g-C3N4.

Earth-abundant Zn-dipyrrin chromophores for efficient CO2 photoreduction

The development of strong sensitizing and Earth-abundant antenna molecules is highly desirable for CO2 reduction through artificial photosynthesis. Herein, a library of Zn-dipyrrin complexes (Z-1-Z-6) are rationally designed via precisely controlling their molecular configuration to optimize strong sensitizing Earth-abundant photosensitizers. Upon visible-light excitation, their special geometry enables intramolecular charge transfer to induce a charge-transfer state, which was first demonstrated to accept electrons from electron donors. The resulting long-lived reduced photosensitizer was confirmed to trigger consecutive intermolecular electron transfers for boosting CO2-to-CO conversion. Remarkably, the Earth-abundant catalytic system with Z-6 and Fe-catalyst exhibits outstanding performance with a turnover number of >20 000 and 29.7% quantum yield, representing excellent catalytic performance among the molecular catalytic systems and highly superior to that of noble-metal photosensitizer Ir(ppy)2(bpy)+ under similar conditions. Experimental and theoretical investigations comprehensively unveil the structure-activity relationship, opening up a new horizon for the development of Earth-abundant strong sensitizing chromophores for boosting artificial photosynthesis.

Nitrogen Configuration Effects on Charge Carrier Dynamics in CsPbBr3/Carbon Dots S-Scheme Heterojunction for Photocatalytic CO2 Reduction

Nitrogen-doped carbon dots (NCDs) featuring primary pyrrolic N and pyridinic N dominated configurations were prepared using hydrothermal (H-NCDs) and microwave (M-NCDs) methods, respectively. These H-NCDs and M-NCDs were subsequently applied to decorate CsPbBr3 nanocrystals (CPB NCs) individually, using a ligand-assisted reprecipitation process. Both CPB/M-NCDs and CPB/H-NCDs nanoheterostructures (NHSs) exhibited S-scheme charge transfer behavior, which enhanced their performance in photocatalytic CO2 reduction and selectivity of CO2-to-CH4 conversion, compared to pristine CPB NCs. The presence of pyrrolic N configuration at the heterojunction of CPB/H-NCDs facilitated efficient S-scheme charge transfer, leading to a remarkable 43-fold increase in photoactivity. In contrast, CPB/M-NCDs showed only a modest 3-fold enhancement in photoactivity, which was attributed to electron trapping by pyridinic N at the heterojunction. The study offers crucial insights into charge carrier dynamics within perovskite/carbon NHSs at the molecular level to advance the understanding of solar fuel generation.

Rubidium Doped Cs2AgBiBr6 Hierarchical Microsphere for Enhanced Photocatalytic CO2 Reduction

Halide perovskites have garnered significant attention for their unique optoelectronic properties in solar-to-fuel conversions. However, the efficiency of halide perovskites in the field of photocatalytic CO2 reduction is largely limited by serious charge recombination and a lack of efficient active sites. In this work, a rubidium (Rb) doped Cs2AgBiBr6 (Rb:CABB) hierarchical microsphere is developed for photocatalytic CO2 reduction. Experimental and theoretical analysis discloses that partially substituting Rb+ for Ag+ can effectively modulate the electronic structure of CABB, favoring charge separation and making adjacent Bi atoms an electron-rich active site. Further investigations indicated that Rb doping also reduces the energy barriers of the rate-determining step in CO2 reduction. As a result, Rb:CABB demonstrated an enhanced CO yield compared to its undoped counterpart. This work presents a promising approach to optimizing the electronic structures of photocatalysts and paving a new way for exploring halide perovskites for photocatalytic CO2 reduction.

Ruthenium Single Atomic Sites Surrounding the Support Pit with Exceptional Photocatalytic Activity

Single-metal atomic sites and vacancies can accelerate the transfer of photogenerated electrons and enhance photocatalytic performance in photocatalysis. In this study, a series of nickel hydroxide nanoboards (Ni(OH)x NBs) with different loadings of single-atomic Ru sites (w-SA-Ru/Ni(OH)x) were synthesized via a photoreduction strategy. In such catalysts, single-atomic Ru sites are anchored to the vacancies surrounding the pits. Notably, the SA-Ru/Ni(OH)x with 0.60 wt % Ru loading (0.60-SA-Ru/Ni(OH)x) exhibits the highest catalytic performance (27.6 mmol g-1 h-1) during the photocatalytic reduction of CO2 (CO2RR). Either superfluous (0.64 wt %, 18.9 mmol g-1 h-1; 3.35 wt %, 9.4 mmol-1 h-1) or scarce (0.06 wt %, 15.8 mmol g-1 h-1; 0.29 wt %, 21.95 mmol g-1 h-1; 0.58 wt %, 23.4 mmol g-1 h-1) of Ru sites have negative effect on its catalytic properties. Density functional theory (DFT) calculations combined with experimental results revealed that CO2 can be adsorbed in the pits; single-atomic Ru sites can help with the conversion of as-adsorbed CO2 and lower the energy of *COOH formation accelerating the reaction; the excessive single-atomic Ru sites occupy vacancies that retard the completion of CO2RR.

A Review of the Effect of Defect Modulation on the Photocatalytic Reduction Performance of Carbon Dioxide

Constructive defect engineering has emerged as a prominent method for enhancing the performance of photocatalysts. The mechanisms of the influence of defect types, concentrations, and distributions on the efficiency, selectivity, and stability of CO2 reduction were revealed for this paper by analyzing the effects of different types of defects (e.g., metallic defects, non-metallic defects, and composite defects) on the performance of photocatalysts. There are three fundamental steps in defect engineering techniques to promote photocatalysis, namely, light absorption, charge transfer and separation, and surface-catalyzed reactions. Defect engineering has demonstrated significant potential in recent studies, particularly in enhancing the light-harvesting, charge separation, and adsorption properties of semiconductor photocatalysts for reducing processes like carbon dioxide reduction. Furthermore, this paper discusses the optimization method used in defect modulation strategy to offer theoretical guidance and an experimental foundation for designing and preparing efficient and stable photocatalysts.

Construction of Dual-Active Sites by Interfacing with Polyhydroxy Fullerene on Nickel Hydroxide Surfaces to Promote CO2 Deep Photoreduction to CH4

Due to the complex series of elementary steps involved, achieving deep photoreduction of CO2 to multielectron products such as CH4 remains a challenging task. Therefore, it is crucial to strategically design catalysts that facilitate the controlled formation of the crucial intermediates and provide precise control over the reaction pathway. Herein, we present a pioneering approach by employing polyhydroxy fullerene (PHF) molecules to modify the surface of Ni(OH)2, creating stable and effective synergistic sites to enhance the formation of CH4 from CO2 under light irradiation. As a result, the optimized PHF-modified Ni(OH)2 cocatalyst achieves a CH4 production rate of 455 μmol g-1 h-1, with an electron-based selectivity of approximately 60%. The combination of in situ characterizations and theoretical calculations reveals that the hydroxyl species on the surface of PHF can participate in stabilizing crucial intermediates and facilitating water activation, thereby altering the reaction pathway to form CH4 instead of CO. This study provides a novel approach to regulating the selectivity of photocatalytic CO2 reduction by exploring molecular surface modification through interfacing with functionalized carbon clusters.

Defective Nb2C MXene Cocatalyst on TiO2 Microsphere for Enhanced Photocatalytic CO2 Conversion to Methane

Sustainable and scalable solar-energy-driven CO2 conversion into fuels requires earth-abundant and stable photocatalysts. In this work, a defective Nb2C MXene as a cocatalyst and TiO2 microspheres as photo-absorbers, constructed via a coulombic force-driven self-assembly, is synthesized. Such photocatalyst, at an optimized loading of defective Nb2C MXene (5% def-Nb2C/TiO2), exhibits a CH4 production rate of 7.23 µmol g-1 h-1, which is 3.8 times higher than that of TiO2. The Schottky junction at the interface improves charge transfer from TiO2 to defective Nb2C MXene and the electron-rich feature (nearly free electron states) enables multielectron reaction of CO2, which apparently leads to high activity and selectivity to CH4 (sel. 99.5%) production. Moreover, DFT calculation demonstrates that the Fermi level (EF) of defective Nb2C MXene (-0.3 V vs NHE) is more positive than that of Nb2C MXene (-1.0 V vs NHE), implying a strong capacity to accept photogenerated electrons and enhance carrier lifetime. This work gives a direction to modify the earth-abundant MXene family as cocatalysts to build high-performance photocatalysts for energy production.

Construction of an Electron Capture and Transfer Center for Highly Efficient and Selective Solar-Light-Driven CO2 Conversion

Exploring high-efficiency photocatalysts for selective CO2 reduction is still challenging because of the limited charge separation and surface reactions. In this study, a noble-metal-free metallic VSe2 nanosheet was incorporated on g-C3N4 to serve as an electron capture and transfer center, activating surface active sites for highly efficient and selective CO2 photoreduction. Quasi in situ X-ray photoelectron spectroscopy (XPS), soft X-ray absorption spectroscopy (sXAS), and femtosecond transient absorption spectroscopy (fs-TAS) unveiled that VSe2 could capture electrons, which are further transferred to the surface for activating active sites. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and density functional theory (DFT) calculations revealed a kinetically feasible process for the formation of a key intermediate and confirmed the favorable production of CO on the VSe2/PCN (protonated C3N4) photocatalyst. As an outcome, the optimized VSe2/PCN composite achieved 97% selectivity for solar-light-driven CO2 conversion to CO with a high rate of 16.3 μmol·g-1·h-1, without any sacrificial reagent or photosensitizer. This work offers new insights into the photocatalyst design toward highly efficient and selective CO2 conversion.

Photocatalytic oxygenation of sulfide using solar light and ingenious GQDs@AQ catalyst: Mechanistic and synthetic investigations

The combination of excellent electronic properties and thermal stability positions orange-derived graphene quantum dots (GQDs) as promising materials for solar light-based applications. Researchers are actively exploring their potential in fields such as photovoltaics, photocatalysis, optoelectronics, and energy storage. Their abundance, cost-effectiveness, and eco-friendly nature further contribute to their growing relevance in cutting-edge scientific research. Furthermore, only GQDs are not much more effective in the UV-visible region, therefore, required band gap engineering in GQDs material. In this context, we designed GQDs-based light harvesting materials, which is active in UV-visible region. Herein we synthesized GQDs coupled with 2,6-diaminoanthrquninone (AQ), that is, GQDs@AQ light harvesting photocatalyst the first time for the oxidation of sulfide to sulfoxide under visible light. For the integrating reactions of sulfide in aerobic conditions under visible light by GQDs@AQ photocatalyst exhibit utmost higher photocatalytic activity than simple GQDs due to low molar extinction coefficient and slow recombination charges. The use of GQDs@AQ light harvesting photocatalyst, showed the excellent organic transformation efficiency of sulfide to sulfoxide with excellent yield (94%). The high efficiency and excellent yield of 94% indicate the effectiveness of GQDs@AQ as a photocatalyst for these specific organic transformations.

Advances in Defect Engineering of Metal Oxides for Photocatalytic CO2 Reduction

Photocatalytic CO2 reduction technology, capable of converting low-density solar energy into high-density chemical energy, stands as a promising approach to alleviate the energy crisis and achieve carbon neutrality. Semiconductor metal oxides, characterized by their abundant reserves, good stability, and easily tunable structures, have found extensive applications in the field of photocatalysis. However, the wide bandgap inherent in metal oxides contributes to their poor efficiency in photocatalytic CO2 reduction. Defect engineering presents an effective strategy to address these challenges. This paper reviews the research progress in defect engineering to enhance the photocatalytic CO2 reduction performance of metal oxides, summarizing defect classifications, preparation methods, and characterization techniques. The focus is on defect engineering, represented by vacancies and doping, for improving the performance of metal oxide photocatalysts. This includes advancements in expanding the photoresponse range, enhancing photogenerated charge separation, and promoting CO2 molecule activation. Finally, the paper provides a summary of the current issues and challenges faced by defect engineering, along with a prospective outlook on the future development of photocatalytic CO2 reduction technology.

Unveiling Advancements: Trends and Hotspots of Metal-Organic Frameworks in Photocatalytic CO2 Reduction

Metal-organic frameworks (MOFs) are robust, crystalline, and porous materials featured by their superior CO2 adsorption capacity, tunable energy band structure, and enhanced photovoltaic conversion efficiency, making them highly promising for photocatalytic CO2 reduction reaction (PCO2RR). This study presents a comprehensive examination of the advancements in MOFs-based PCO2RR field spanning the period from 2011 to 2023. Employing bibliometric analysis, the paper scrutinizes the widely adopted terminology and citation patterns, elucidating trends in publication, leading research entities, and the thematic evolution within the field. The findings highlight a period of rapid expansion and increasing interdisciplinary integration, with extensive international and institutional collaboration. A notable emphasis on significant research clusters and key terminologies identified through co-occurrence network analysis, highlighting predominant research on MOFs such as UiO, MIL, ZIF, porphyrin-based MOFs, their composites, and the hybridization with photosensitizers and molecular catalysts. Furthermore, prospective design approaches for catalysts are explored, encompassing single-atom catalysts (SACs), interfacial interaction enhancement, novel MOF constructions, biocatalysis, etc. It also delves into potential avenues for scaling these materials from the laboratory to industrial applications, underlining the primary technical challenges that need to be overcome to facilitate the broader application and development of MOFs-based PCO2RR technologies.

Engineering NH2-Cu-NH2 Triple-atom Sites in Defective MOFs for Selective Overall Photoreduction of CO2 into CH3COCH3

Selective photoreduction of CO2 to multicarbon products, is an important but challenging task, due to high CO2 activation barriers and insufficient catalytic sites for C-C coupling. Herein, a defect engineering strategy for incorporating copper sites into the connected nodes of defective metal-organic framework UiO-66-NH2 for selective overall photo-reduction of CO2 into acetone. The Cu2+ site in well-modified CuN2O2 units served as a trapping site to capture electrons via efficient electron-hole separation, forming the active Cu+ site for CO2 reduction. Two NH2 groups in CuN2O2 unit adsorb CO2 and cooperated with copper ion to functionalize as a triple atom catalytic site, each interacting with one CO2 molecule to strengthen the binding of *CO intermediate to the catalytic site. The deoxygenated *CO attached to the Cu site interacted with *CH3 fixed at one amino group to form the key intermediate CO*-CH3, which interacted with the third reduction intermediate on another amino group to produce acetone. Our photocatalyst realizes efficient overall CO2 reduction to C3 product acetone CH3COCH3 with an evolution rate of 70.9 μmol gcat -1 h-1 and a selectivity up to 97 % without any adducts, offering a promising avenue for designing triple-atomic sites to producing C3 product from photosynthesis with water.

Spatially ordered NiOOH-ZnS/CdS heterostructures with an efficient photo-carrier transmission channel for markedly improved H2 production

Spatially-ordered 1D nanocrystal-based semiconductor nanostructures possess distinct merits for photocatalytic reaction, including large surface area, fast carrier separation, and enhanced light scattering and absorption. Nevertheless, establishing a valid photo-carrier transmission channel is still crucial yet challenging for semiconductor heterostructures to realize efficient photocatalysis. In this work, spatially ordered NiOOH-ZnS/CdS heterostructures were constructed by sequential ZnS coating and NiOOH photo-deposition on multi-armed CdS, which consists of {112̄0}-faceted wurtzite nanorods grown epitaxially on {111}-faceted zinc blende core. Intriguingly, the surface photovoltage spectroscopy and PbO2 photo-deposition results suggest that the photogenerated holes of CdS were first transferred to the Zn-vacancy level of ZnS and then to NiOOH, as driven by the built-in electric field between ZnS and CdS and the hole-extracting effect of the NiOOH cocatalyst, leading to the efficient charge separation of NiOOH-ZnS/CdS. With visible-light (λ > 420 nm) irradiation, NiOOH-ZnS/CdS exhibited a distinguished H2-evolution rate of 152.20 mmol g-1 h-1 (apparent quantum efficiency of 40.9% at 420 nm), approximately 18 folds that of 3 wt% Pt-loaded CdS and much higher than that of ZnS/CdS and NiOOH-CdS counterparts as well as the most reported CdS-containing photocatalysts. Moreover, the cycling and long-term H2 generation tests manifested the outstanding photocatalyst stability of NiOOH-ZnS/CdS. The study results presented here may propel the controllable design of highly-active nanomaterials for solar conversion and utilization.

Boron-Nitrogen-Embedded Polycyclic Aromatic Hydrocarbon-Based Controllable Hierarchical Self-Assemblies through Synergistic Cation-π and C-H···π Interactions for Bifunctional Photo- and Electro-Catalysis

Boron-Nitrogen-embedded polycyclic aromatic hydrocarbons (BN-PAHs) as novel π-conjugated systems have attracted immense attention owing to their superior optoelectronic properties. However, constructing long-range ordered supramolecular assemblies based on BN-PAHs remains conspicuously scarce, primarily attributed to the constraints arising from coordinating multiple noncovalent interactions and the intrinsic characteristics of BN-PAHs, which hinder precise control over delicate self-assembly processes. Herein, we achieve the successful formation of BN-PAH-based controllable hierarchical assemblies through synergistically leveraged cation-π and C-H···π interactions. By carefully adjusting the solvent conditions in two progressive assembly hierarchies, the one-dimensional (1D) supramolecular assemblies with "rigid yet flexible" assembled units are first formed by cation-π interactions, and then they can be gradually fused into two-dimensional (2D) structures under specific C-H···π interactions, thus realizing the precise control of the transformation process from BN-PAH-based 1D primary structures to 2D higher-order assemblies. The resulting 2D-BNSA, characterized by enhanced electrical conductivity and ordered 2D layered structure, provides anchoring and dispersion sites for loading two appropriate nanocatalysts, thus facilitating the efficient photocatalytic CO2 reduction (with a remarkable CH4 evolution rate of 938.7 μmol g-1 h-1) and electrocatalytic acetylene semihydrogenation (reaching a Faradaic efficiency for ethylene up to 98.5%).

High-Volumetric Density Atomic Cobalt on Multishell ZnxCd1-xS Boosts Photocatalytic CO2 Reduction

The volumetric density of the metal atomic site is decisive to the operating efficiency of the photosynthetic nanoreactor, yet its rational design and synthesis remain a grand challenge. Herein, we report a shell-regulating approach to enhance the volumetric density of Co atomic sites onto/into multishell ZnxCd1-xS for greatly improving CO2 photoreduction activity. We first establish a quantitative relation between the number of shell layers, specific surface areas, and volumetric density of atomic sites on multishell ZnxCd1-xS and conclude a positive relation between photosynthetic performance and the number of shell layers. The triple-shell ZnxCd1-xS-Co1 achieves the highest CO yield rate of 7629.7 μmol g-1 h-1, superior to those of the double-shell ZnxCd1-xS-Co1 (5882.2 μmol g-1 h-1) and single-shell ZnxCd1-xS-Co1 (4724.2 μmol g-1 h-1). Density functional theory calculations suggest that high-density Co atomic sites can promote the mobility of photogenerated electrons and enhance the adsorption of Co(bpy)32+ to increase CO2 activation (CO2 → CO2* → COOH* → CO* → CO) via the S-Co-bpy interaction, thereby enhancing the efficiency of photocatalytic CO2 reduction.

Noble-Metal-Free High-Entropy Alloy Nanoparticles for Efficient Solar-Driven Photocatalytic CO2 Reduction

Metal nanoparticle (NP) cocatalysts are widely investigated for their ability to enhance the performance of photocatalytic materials; however, their practical application is often limited by the inherent instability under light irradiation. This challenge has catalyzed interest in exploring high-entropy alloys (HEAs), which, with their increased entropy and lower Gibbs free energy, provide superior stability. In this study, 3.5 nm-sized noble-metal-free NPs composed of a FeCoNiCuMn HEA are successfully synthesized. With theoretic calculation and experiments, the electronic structure of HEA in augmenting the catalytic CO2 reduction has been uncovered, including the individual roles of each element and the collective synergistic effects. Then, their photocatalytic CO2 reduction capabilities are investigated when immobilized on TiO2. HEA NPs significantly enhance the CO2 photoreduction, achieving a 23-fold increase over pristine TiO2, with CO and CH4 production rates of 235.2 and 19.9 µmol g-1 h-1, respectively. Meanwhile, HEA NPs show excellent stability under simulated solar irradiation, as well high-energy X-ray irradiation. This research emphasizes the promising role of HEA NPs, composed of earth-abundant elements, in revolutionizing the field of photocatalysis.

Efficient Photoreduction of CO2 to CO with 100% Selectivity by Slowing Down Electron Transport

It remains challenging to obtain a single product in the gas-solid photocatalytic reduction of CO2 because CO and CH4 are usually produced simultaneously. This study presents the design of the I-type nested heterojunction TiO2/BiVO4 with controllable electron transport by modulating the TiO2 component. This study demonstrates that slowing electron transport could enable TiO2/BiVO4-4 to generate CO with 100% selectivity. In addition, modifying TiO2/BiVO4-4 by loading a Cu single atom further increased the CO product yield by 3.83 times (17.33 μmol·gcat-1·h-1), while maintaining 100% selectivity for CO. Characterization and density functional theory (DFT) calculations revealed that the selectivity was mainly determined by the electron transport of the support, whereas CO2 was efficiently adsorbed and activated by the Cu single atom. Such a two-step regulation strategy of combining heterojunction with single atom enhances the possibility of simultaneously obtaining high selectivity and high yield in the photocatalytic reduction of CO2.

CO2 Photoreduction Over Semiconducting 2D Materials with Supported Single Atoms: Recent Progress and Challenges

In the face of the growing energy crisis and environmental challenges, substantial efforts are now directed toward sustainable clean energy as a replacement for traditional fossil fuels. CO2 photoreduction into value-added chemicals and fuels is widely recognized as a promising approach to mitigate current energy and environmental concerns. Photocatalysts comprising single atoms (SAs) supported on two-dimensional (2D) semiconducting materials (SAs-2DSemi) have emerged as a novel frontier due to the combined merits of SA catalysts and 2D materials. In this study, we review advancements in metal SAs confined on 2DSemi substrates, categorized into four groups: (1) metal oxide-based, (2) g-C3N4-based, (3) emerging, and (4) hybridized 2DSemi, for photocatalytic CO2 conversion over the past few years. With a particular focus on highlighting the distinct advantages of SAs-2DSemi, we delve into the synthesis of state-of-the-art catalysts, their catalytic performances, and mechanistic elucidation facilitated by experimental characterizations and theoretical calculations. Following this, we outline the challenges in this field and offer perspectives on harnessing the potential of SAs-2DSemi as promising photocatalysts. This comprehensive review aims to provide valuable insights for the future development of 2D photocatalytic materials involving SAs for CO2 reduction.

Light-Driven C-C Coupling for Targeted Synthesis of CH3 COOH with Nearly 100 % Selectivity from CO2

Targeted synthesis of acetic acid (CH3 COOH) from CO2 photoreduction under mild conditions mainly limits by the kinetic challenge of the C-C coupling. Herein, we utilized doping engineering to build charge-asymmetrical metal pair sites for boosted C-C coupling, enhancing the activity and selectivity of CO2 photoreduction towards CH3 COOH. As a prototype, the Pd doped Co3 O4 atomic layers are synthesized, where the established charge-asymmetrical cobalt pair sites are verified by X-ray photoelectron spectroscopy and X-ray absorption near edge spectroscopy spectra. Theoretical calculations not only reveal the charge-asymmetrical cobalt pair sites caused by Pd atom doping, but also manifest the promoted C-C coupling of double *COOH intermediates through shortening of the coupled C-C bond distance from 1.54 to 1.52 Å and lowering their formation energy barrier from 0.77 to 0.33 eV. Importantly, the decreased reaction energy barrier from the protonation of two*COOH into *CO intermediates for the Pd-Co3 O4 atomic layer slab is 0.49 eV, higher than that of the Co3 O4 atomic layer slab (0.41 eV). Therefore, the Pd-Co3 O4 atomic layers exhibit the CH3 COOH evolution rate of ca. 13.8 μmol g-1  h-1 with near 100% selectivity, both of which outperform all previously reported single photocatalysts for CO2 photoreduction towards CH3 COOH under similar conditions.

Prediction of M3 B4 -type MBenes as Promising Catalysts for CO2 Capture and Reduction

The rational design of novel catalysts with high activity and selectivity for carbon dioxide reduction reaction (CO2 RR) is highly desired. In this work, we have extensive investigations on the properties of two-dimensional transition metal borides (MBenes) to achieve efficient CO2 capture and reduction through first-principles calculations. The results show that all the investigated M3 B4 -type MBene exhibit remarkable CO2 capture and activation abilities, which proved to be derived from the lone pair of electrons on the MBene surface. Then, we emphasize that the investigated MBenes can further selectively reduce activated CO2 to CH4 . Moreover, a new linear scaling relationship of the adsorption energies of potential-determining intermediates (*OCH2 O and *HOCH2 O) versus ΔG(*OCHO) has been established, where the CO2 RR limiting potentials on MBenes are determined by the different fitting slopes of ΔG(*OCH2 O) and ΔG(*HOCHO), allowing significantly lower limiting potentials to be achieved compared to transition metals. Especially, two promising CO2 RR catalysts (Mo3 B4 and Cr3 B4 MBene) exist quite low limiting potentials of -0.48 V and -0.66 V, as well as competitive selectivity concerning hydrogen evolution reactions have been identified. Our research results make future advances in CO2 capture by MBenes easier and exploit the applications of Mo3 B4 and Cr3 B4 MBenes as novel CO2 RR catalysts.

Nickel selenide/g-C3N4 heterojunction photocatalyst promotes CC coupling for photocatalytic CO2 reduction to ethane

Photocatalytic CO2 reduction to generate high value-added and renewable chemicals is of great potential in facilitating the realization of closed-loop and carbon-neutral hydrogen economy. Stabilizing and accelerating the formation of COCO* intermediate is crucial to achieve high-selectivity ethane production. Herein, a novel 3D/2D NiSe2/g-C3N4 heterostructure that mesoscale hedgehog nickel selenide (NiSe2) grown on the ultrathin g-C3N4 nanosheets were synthesized via a successively high temperature calcination process and in-situ thermal injection method for the first time. The optimum 2.7 % NiSe2/g-C3N4 heterostructure achieved moderate C2H6 generation rate of 46.1 μmol·g-1·h-1 and selectivity of 97.5 % without any additional photosensitizers and sacrificial agents under light illumination. Based on the results of the theoretical calculations and experiments, the improvement of photocatalytic CO2 to C2H6 production and selectivity should be ascribed to the increased visible light absorption ability, unique 3D/2D heterostructures with promoted adsorption of CO2 molecules on the Ni active sites, the type II heterojunction with improved charge transfer dynamics and lowered interfacial transfer resistance, as well as the formation of COCO* key intermediate. This work provides an inspiration to construct efficient photocatalysts for the direct transformation of CO2 to multicarbon products (C2+).

Asymmetrical Interactions between Ni Single Atomic Sites and Ni Clusters in a 3D Porous Organic Framework for Enhanced CO2 Photoreduction

3D porous organic frameworks, which possess the advantages of high surface area and abundant exposed active sites, are considered ideal platforms to accommodate single atoms (SAs) and metal nanoclusters (NCs) in high-performance catalysts; however, very little research has been conducted in this field. In the present work, a 3D porous organic framework containing Ni1 SAs and Nin NCs is prepared through the metal-assisted one-pot polycondensation of tetraaldehyde and hexaaminotriptycene. The single metal sites and metal clusters confined in the 3D space created a favorable micro-environment that facilitated the activation of chemically inert CO2 molecules, thus promoting the overall photoconversion efficiency and selectivity of CO2 reduction. The 3D-NiSAs/NiNCs-POPs, as a CO2 photoreduction catalyst, demonstrated an exceptional CO production rate of 6.24 mmol g-1  h-1 , high selectivity of 98%, and excellent stability. The theoretical calculations uncovered that asymmetrical interaction between Ni1 SAs and Nin NCs not only favored the bending of CO2 molecules and reducing the CO2 reduction energy, but also regulated the electronic structure of the catalyst leading to the optimal binding strength of intermediates.

Large-Area Conductive MOF Ultrathin Film Controllably Integrating Dinuclear-Metal Sites and Photosensitizers to Boost Photocatalytic CO2 Reduction with H2O as an Electron Donor

Owing to the electrical conductivity and periodic porosity, conductive metal-organic framework (cMOF) ultrathin films open new perspectives to photocatalysis. The space-selective assembly of catalytic sites and photosensitizers in/on cMOF is favorable for promoting the separation of photogenerated carriers and mass transfer. However, the controllable integration of functional units into the cMOF film is rarely reported. Herein, via the synergistic effect of steric hindrance and an electrostatic-driven strategy, the dinuclear-metal molecular catalysts (DMC) and perovskite (PVK) quantum dot photosensitizers were immobilized into channels and onto the surface of cMOF ultrathin films, respectively, affording [DMC@cMOF]-PVK film photocatalysts. In this unique heterostructure, cMOF not only facilitated the charge transfer from PVK to DMC but also guaranteed mass transfer. Using H2O as an electron donor, [DMC@cMOF]-PVK realized a 133.36 μmol·g-1·h-1 CO yield in photocatalytic CO2 reduction, much higher than PVK and DMC-PVK. Owing to the excellent light transmission of films, multilayers of [DMC@cMOF]-PVK were integrated to increase the CO yield per unit area, and the 10-layer device realized a 1115.92 μmol·m-2 CO yield in 4 h, which was 8-fold higher than that of powder counterpart. This work not only lightens the development of cMOF-based composite films but also paves a novel avenue for an ultrathin film photocatalyst.

Au-decorated Sb2Se3 photocathodes for solar-driven CO2 reduction

Photoelectrodes with FTO/Au/Sb2Se3/TiO2/Au architecture were studied in photoelectrochemical CO2 reduction reaction (PEC CO2RR). The preparation is based on a simple spin coating technique, where nanorod-like structures were obtained for Sb2Se3, as confirmed by SEM images. A thin conformal layer of TiO2 was coated on the Sb2Se3 nanorods via ALD, which acted as both an electron transfer layer and a protective coating. Au nanoparticles were deposited as co-catalysts via photo-assisted electrodeposition at different applied potentials to control their growth and morphology. The use of such architectures has not been explored in CO2RR yet. The photoelectrochemical performance for CO2RR was investigated with different Au catalyst loadings. A photocurrent density of ∼7.5 mA cm-2 at -0.57 V vs. RHE for syngas generation was achieved, with an average Faradaic efficiency of 25 ± 6% for CO and 63 ± 12% for H2. The presented results point toward the use of Sb2Se3-based photoelectrodes in solar CO2 conversion applications.

Remarkable Enhancement of Photocatalytic Activity of High-Energy TiO2 Nanocrystals for NO Oxidation through Surface Defluorination

The superior photocatalytic activity of TiO2 nanocrystals with exposed high-energy (001) facets, achieved through the use of hydrofluoric acid as a shape-directing reagent, is widely reported. However, in this study, we report for the first time the detrimental effect of surface fluorination on the photoreactivity of high-energy faceted TiO2 nanocrystals towards NO oxidation (resulting in a NO removal rate of only 5.9%). This study aims to overcome this limitation by exploring surface defluorination as an effective strategy to enhance the photocatalytic oxidation of NO on TiO2 nanocrystals enclosed with (001) facets. We found that surface defluorination, achieved through either NaOH washing (resulting in an improved NO removal rate of 23.2%) or calcination (yielding an enhanced NO removal rate of 52%), leads to a large increase in the photocatalytic oxidation of NO on TiO2 nanocrystals with enclosed (001) facets. Defluorination processes stimulate charge separation, effectively retarding recombination and significantly promoting the production of reactive oxygen species, including superoxide radicals (·O2-), singlet oxygen (1O2), and hydroxyl radicals (·OH). Both in situ diffuse reflectance infrared Fourier-transform spectroscopy and density functional theory calculations confirm the higher adsorption of NO after defluorination, thus facilitating the oxidation of NO on TiO2 nanocrystals.

High-Entropy Photothermal Materials

High-entropy (HE) materials, celebrated for their extraordinary chemical and physical properties, have garnered increasing attention for their broad applications across diverse disciplines. The expansive compositional range of these materials allows for nuanced tuning of their properties and innovative structural designs. Recent advances have been centered on their versatile photothermal conversion capabilities, effective across the full solar spectrum (300-2500 nm). The HE effect, coupled with hysteresis diffusion, imparts these materials with desirable thermal and chemical stability. These attributes position HE materials as a revolutionary alternative to traditional photothermal materials, signifying a transformative shift in photothermal technology. This review delivers a comprehensive summary of the current state of knowledge regarding HE photothermal materials, emphasizing the intricate relationship between their compositions, structures, light-absorbing mechanisms, and optical properties. Furthermore, the review outlines the notable advances in HE photothermal materials, emphasizing their contributions to areas, such as solar water evaporation, personal thermal management, solar thermoelectric generation, catalysis, and biomedical applications. The review culminates in presenting a roadmap that outlines prospective directions for future research in this burgeoning field, and also outlines fruitful ways to develop advanced HE photothermal materials and to expand their promising applications.

Boosting CO2 Photoreduction to Formate or CO with High Selectivity over a Covalent Organic Framework Covalently Anchored on Graphene Oxide

Covalent organic frameworks (COFs) have been widely studied in photocatalytic CO2 reduction reaction (CO2 RR). However, pristine COFs usually exhibit low catalytic efficiency owing to the fast recombination of photogenerated electrons and holes. In this study, we fabricated a stable COF-based composite (GO-COF-366-Co) by covalently anchoring COF-366-Co on the surface of graphene oxide (GO) for the photocatalytic CO2 reduction. Interestingly, in absolute acetonitrile (CH3 CN), GO-COF-366-Co shows a high selectivity of 94.4 % for the photoreduction of CO2 to formate, with a formate yield of 15.8 mmol/g, which is approximately four times higher than that using the pristine COF-366-Co. By contrast, in CH3 CN/H2 O (v : v=4 : 1), the main product for the photocatalytic CO2 reduction over GO-COF-366-Co is CO (96.1 %), with a CO yield as high as 52.2 mmol/g, which is also approximately four times higher than that using the pristine COF-366-Co. Photoelectrochemical experiments demonstrate the covalent bonding of COF-366-Co and GO to form the GO-COF-366-Co composite facilitates charge separation and transfer significantly, thereby accounting for the enhanced catalytic activity. In addition, theoretical calculations and in situ Fourier transform infrared spectroscopy reveal H2 O can stabilize the *COOH intermediate to further form a *CO intermediate via O-H(aq)⋅⋅⋅O(*COOH) hydrogen bonding, thus explaining the regulated photocatalytic performance.

Boosting exciton dissociation and charge transfer in CsPbBr3 QDs via ferrocene derivative ligation for CO2 photoreduction

Photo-catalytic CO2 reduction with perovskite quantum dots (QDs) shows potential for solar energy storage, but it encounters challenges due to the intricate multi-electron photoreduction processes and thermodynamic and kinetic obstacles associated with them. This study aimed to improve photo-catalytic performance by addressing surface barriers and utilizing multiple-exciton generation in perovskite QDs. A facile surface engineering method was employed, involving the grafting of ferrocene carboxylic acid (FCA) onto CsPbBr3 (CPB) QDs, to overcome limitations arising from restricted multiple-exciton dissociation and inefficient charge transfer dynamics. Kelvin Probe Force Microscopy and XPS spectral confirmed successfully creating an FCA-modulated microelectric field through the Cs active site, thus facilitating electron transfer, disrupting surface barrier energy, and promoting multi-exciton dissociations. Transient absorption spectroscopy showed enhanced charge transfer and reduced energy barriers, resulting in an impressive CO2-to-CO conversion rate of 132.8 μmol g-1 h-1 with 96.5% selectivity. The CPB-FCA catalyst exhibited four-cycle reusability and 72 h of long-term stability, marking a significant nine-fold improvement compared to pristine CPB (14.4 μmol g-1 h-1). These results provide insights into the influential role of FCA in regulating intramolecular charge transfer, enhancing multi-exciton dissociation, and improving CO2 photoreduction on CPB QDs. Furthermore, these findings offer valuable knowledge for controlling quantum-confined exciton dissociation to enhance CO2 photocatalysis.

Symmetry Breaking Induced Amorphization of Cobalt-Based Catalyst for Boosted CO2 Photoreduction

Photocatalytic reduction of CO2 to energy carriers is intriguing in the industry but kinetically hard to fulfil due to the lack of rationally designed catalysts. A promising way to improve the efficiency and selectivity of such reduction is to break the structural symmetry of catalysts by manipulating coordination. Here, inspired by analogous CoO6 and CoSe6 octahedral structural motifs of the Co(OH)2 and CoSe, a hetero-anionic coordination strategy is proposed to construct a symmetry-breaking photocatalyst prototype of oxygen-deficient Se-doped cobalt hydroxide upon first-principles calculations. Such involvement of large-size Se atoms in CoO6 octahedral frameworks experimentally lead to the switching of semiconductor type of cobalt hydroxide from p to n, generation of oxygen defects, and amorphization. The resultant oxygen-deficient Se,O-coordinated Co-based amorphous nanosheets exhibit impressive photocatalytic performance of CO2 to CO with a generation rate of 60.7 µmol g-1  h-1 in the absence of photosensitizer and scavenger, superior to most of the Co-based photocatalysts. This work establishes a correlation between the symmetry-breaking of catalytic sites and CO2 photoreduction performances, opening up a new paradigm in the design of amorphous photocatalysts for CO2 reduction.

Application of GaS nanotubes as efficient catalysts in photocatalytic hydrolysis: a first principles study

Photocatalytic hydrogen production is a promising and sustainable technology that converts solar energy into hydrogen energy with the assistance of semiconductor photocatalysts. Herein, we investigated the geometric structure and electronic and photocatalytic properties of single-walled GaS nanotubes under the framework of density functional theory with HSE06 as an exchange-correlation function. This paper presents the first study on the geometric structure, electron, and photocatalytic properties of single-walled GaS nanotubes. The results show that the strain energy and formation energy of GaS nanotubes decrease, while the structure is more stable, with increasing radius. Our study shows that after rolling from the slab, the nanotubes undergo a transition from an indirect band gap to a direct band gap and have appropriate band gaps for absorbing visible light. Moreover, it is speculated that the large disparity between the effective mass of electrons and holes can reduce charge carrier recombination. Among them, the nanotube with a diameter larger than (35, 0) showed promising band edge positions for photocatalytic hydrolysis redox potential with pH values between 0 and 7. Based on these properties, we believe that GaS nanotubes will be promising in photocatalytic hydrolysis.

Accelerated Photocatalytic Carbon Dioxide Reduction and Water Oxidation under Spatial Synergy

Photocatalytic conversion of CO2 and H2 O into fuels and oxygen is a highly promising solution for carbon-neutral recycling. Traditionally, researchers have studied CO2 reduction and H2 O oxidation separately, overlooking potential synergistic interplay between these processes. This study introduces an innovative approach, spatial synergy, which encourages synergistic progress by bringing the two half-reactions into atomic proximity. To facilitate this, we developed a defective ZnIn2 S4 -supported single-atom Cu catalyst (Cu-SA/D-ZIS), which demonstrates remarkable catalytic performance with CO2 reduction rates of 112.5 μmol g-1  h-1 and water oxidation rates of 52.3 μmol g-1  h-1 , exhibiting a six-fold enhancement over D-ZIS. The structural characterization results indicated that the trapping effect of vacancy associates on single-atom copper led to the formation of an unsaturated coordination structure, Cu-S3 , consequently giving rise to the CuZn 'VS ⋅⋅VZn " defect complexes. FT-IR studies coupled with theoretical calculations reveal the spatially synergistic CO2 reduction and water oxidation on CuZn 'VS ⋅⋅VZn ", where the breakage of O-H in water oxidation is synchronized with the formation of *COOH, significantly lowering the energy barrier. Notably, this study introduces and, for the first time, substantiates the spatial synergy effect in CO2 reduction and H2 O oxidation through a combination of experimental and theoretical analyses, providing a fresh insight in optimizing photocatalytic system.

A nonmetallic plasmonic catalyst for photothermal CO2 flow conversion with high activity, selectivity and durability

The meticulous design of active sites and light absorbers holds the key to the development of high-performance photothermal catalysts for CO2 hydrogenation. Here, we report a nonmetallic plasmonic catalyst of Mo2N/MoO2-x nanosheets by integrating a localized surface plasmon resonance effect with two distinct types of active sites for CO2 hydrogenation. Leveraging the synergism of dual active sites, H2 and CO2 molecules can be simultaneously adsorbed and activated on N atom and O vacancy, respectively. Meanwhile, the plasmonic effect of this noble-metal-free catalyst signifies its promising ability to convert photon energy into localized heat. Consequently, Mo2N/MoO2-x nanosheets exhibit remarkable photothermal catalytic performance in reverse water-gas shift reaction. Under continuous full-spectrum light irradiation (3 W·cm-2) for a duration of 168 h, the nanosheets achieve a CO yield rate of 355 mmol·gcat-1·h-1 in a flow reactor with a selectivity exceeding 99%. This work offers valuable insights into the precise design of noble-metal-free active sites and the development of plasmonic catalysts for reducing carbon footprints.

Urea catalytic oxidation for energy and environmental applications

Urea is one of the most essential reactive nitrogen species in the nitrogen cycle and plays an indispensable role in the water-energy-food nexus. However, untreated urea or urine wastewater causes severe environmental pollution and threatens human health. Electrocatalytic and photo(electro)catalytic urea oxidation technologies under mild conditions have become promising methods for energy recovery and environmental remediation. An in-depth understanding of the reaction mechanisms of the urea oxidation reaction (UOR) is important to design efficient electrocatalysts/photo(electro)catalysts for these technologies. This review provides a critical appraisal of the recent advances in the UOR by means of both electrocatalysis and photo(electro)catalysis, aiming to comprehensively assess this emerging field from fundamentals and materials, to practical applications. The emphasis of this review is on the design and development strategies for electrocatalysts/photo(electro)catalysts based on reaction pathways. Meanwhile, the UOR in natural urine is discussed, focusing on the influence of impurity ions. A particular emphasis is placed on the application of the UOR in energy and environmental fields, such as hydrogen production by urea electrolysis, urea fuel cells, and urea/urine wastewater remediation. Finally, future directions, prospects, and remaining challenges are discussed for this emerging research field. This critical review significantly increases the understanding of current progress in urea conversion and the development of a sustainable nitrogen economy.

Copper Modulated Lead-Free Cs4 MnSb2 Cl12 Double Perovskite Microcrystals for Photocatalytic Reduction of CO2

In order to deal with the global energy crisis and environmental problems, reducing carbon dioxide through artificial photosynthesis has become a hot topic. Lead halide perovskite is attracted people's attention because of its excellent photoelectric properties, but the toxicity and long-term instability prompt people to search for new photocatalysts. Herein, a series of <111> inorganic double perovskites Cs4 Mn1-x Cux Sb2 Cl12 microcrystals (x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5) are synthesized and characterized. Among them, Cs4 Mn0.7 Cu0.3 Sb2 Cl12 microcrystals have the best photocatalytic performance, and the yields of CO and CH4 are 503.86 and 68.35 µmol g-1 , respectively, after 3 h irradiation, which are the highest among pure phase perovskites reported so far. In addition, in situ Fourier transform infrared (FT-IR) spectroscopy and electron spin resonance (ESR) spectroscopy are used to explore the mechanism of the photocatalytic reaction. The results highlight the potential of this class of materials for photocatalytic reduction reactions.

Porous In2O3 Hollow Tube Infused with g-C3N4 for CO2 Photocatalytic Reduction

Converting CO2 into energy-rich fuels by using solar energy is a sustainable solution that promotes a carbon-neutral economy and mitigates our reliance on fossil fuels. However, affordable and efficient CO2 conversion remains an ongoing challenge. Here, we introduce polymeric g-C3N4 into the pores of a hollow In2O3 microtube. This architecture results in a compact and staggered arrangement between g-C3N4 and In2O3 components with an increased contact interface for improved charge separation. The hollow interior further contributes to strengthening light absorption. The resulting g-C3N4-In2O3 hollow tubes exhibit superior activity (274 μmol·g-1·h-1) toward CO2 to CO conversion in comparison with those of pure In2O3 and g-C3N4 (5.5 and 93.6 μmol·g-1·h-1, respectively), underlining the role of integrating g-C3N4 and In2O3 in this advanced system. This work offers a strategy for the advanced design and preparation of hollow heterostructures for optimizing CO2 adsorption and conversion by integrating inorganic and organic semiconductors.

Hydrochar-Supported NiFe2O4Nanosheets with a Tailored Microstructure for Enhanced CO2Photoreduction to Syngas

Constructing high-efficiency composite photocatalysts with enhanced charge transfer and a rapid surface catalytic reaction has recently received significant attention. Herein, a hydrochar-mediated NiFe2O4 nanosheet (C/NFO) composite was rationally constructed by a simple hydrothermal method. Intimate interface contacts and chemical interactions between hydrochar and NFO were formed. The prepared C/NFO samples exhibited remarkable visible-light-driven catalytic CO2 reduction properties under mild reaction conditions with Ru(bpy)32+ sensitization. As the optimized sample, 16%-C/NFO achieved a 4-fold enhancement of CO production (17.49 μmol/h) compared with that of pure NFO. The C/NFO samples demonstrated good activity and structural stability in the CO2 photoreduction system. The carbon source of CO derived from CO2 was verified through isotopic labeling experiments using 13CO2. In situ photoluminescence and electrochemical characterizations confirmed the role of electron transfer intermediates of C/NFO. The synergistic effect of the nanosheet-like structure of NFO, combined with the surface functional groups of hydrochar, facilitated an exceptionally high rate of charge transfer and exposed abundant active adsorption sites for CO2, thereby promoting the efficient separation of photogenerated charge carriers and enhancing photocatalytic activity for CO2 reduction. This study presents a promising strategy for the rational design of hydrochar coupled with transition metal compound catalysts for efficient CO2 photoreduction.

Molecular Co-Catalyst Confined within a Metallacage for Enhanced Photocatalytic CO2 Reduction

The construction of structurally well-defined supramolecular hosts to accommodate catalytically active species within a cavity is a promising way to address catalyst deactivation. The resulting supramolecular catalysts can significantly improve the utilization of catalytic sites, thereby achieving a highly efficient chemical conversion. In this study, the Co-metalated phthalocyanine (Pc-Co) was successfully confined within a tetragonal prismatic metallacage, leading to the formation of a distinctive type of supramolecular photocatalyst (Pc-Co@Cage). The host-guest architecture of Pc-Co@Cage was unambiguously elucidated by single-crystal X-ray diffraction (SCXRD), NMR, and ESI-TOF-MS, revealing that the single cobalt active site can be thoroughly isolated within the space-restricted microenvironment. In addition, we found that Pc-Co@Cage can serve as a homogeneous supramolecular photocatalyst that displays high CO2 to CO conversion in aqueous media under visible light irradiation. This supramolecular photocatalyst exhibits an obvious improvement in activity (TONCO = 4175) and selectivity (SelCO = 92%) relative to the nonconfined Pc-Co catalyst (TONCO = 500, SelCO = 54%). The present strategy provided a rare example for the construction of a highly active, selective, and stable photocatalyst for CO2 reduction through a cavity-confined molecular catalyst within a discrete metallacage.

Theoretical Investigation of the BCN Monolayer and Their Derivatives for Metal-free CO2 Photocatalysis, Capture, and Utilization

In recent years, carbon capture and utilization (CCU) has been explored as an attractive solution to global warming, which is mainly caused by increasing CO2 emission levels. Many functional materials have been developed for removing atmospheric CO2 and converting it to more useful forms of carbon. Traditional metallic photocatalytic species have drawbacks-photocorrosion, low visible-light absorbance, and environmental damage; therefore, metal-free materials have attracted considerable research attention. In particular, boron nitride (BN) possesses unique B-N bonds, characterized by a large difference in the electronegativity of atoms that facilitates CO2 reduction, and catalytic CO2 reduction by boron carbon nitride (BCN) has been demonstrated under visible light; hence, these two materials can be considered potential CO2 reduction photocatalysts. However, further modification of the materials and their applicability to other CCU applications have not been extensively explored. Therefore, we decided to investigate the modification of BCN monolayers, with the aim of ensuring that the properties of the materials are better suited, first, to the requirements of CO2 photocatalysis, and second, to those of carbon capture or other optoelectronic applications. In this study, we considered various novel BCN monolayers, based on modification via metal-free substitutional doping and nitrogen vacancy creation, and performed first-principles density functional theory calculations. The effects of the modifications on band gap tuning, charge transfer, and the CO2 adsorption ability were all studied. Specifically, ON-B13C8N11 and SiC-2 × 2-BC6N were shown to possess excellent properties for photocatalytic CO2 reduction, and OC-2 × 2-BC6N and Nv-4 × 4-BN can be considered for future CO2 capture materials. These results contribute to existing CCU approaches, suggesting that BCN monolayer modification merits further investigation, and offering insights relevant to other photocatalytic applications.

Hydrophobic Porphyrin Titanium-Based MOFs for Visible-Light-Driven CO2 Reduction to Formate

Three hydrophobic porphyrin titanium-based metal-organic frameworks (MOFs) (HPA/DGIST-1, DPA/DGIST-1, and OPA/DGIST-1) were synthesized through a postsynthetic coordination reaction by using alkylphosphonic acid of different lengths (HPA, hexylphosphonic acid; DPA, dodecylphosphonic acid; OPA, octadecylphosphonic acid). Compared with the hydrophilic DGIST-1, modified DGIST-1 exhibits excellent hydrophobicity and presents good stability in humid atmospheres. Due to the introduction of porphyrin ligands, HPA/DGIST-1, DPA/DGIST-1, and OPA/DGIST-1 showed good visible-light absorption (380-700 nm) and sensitive photogenerated charge responses. When acted as catalysts, these hydrophobic Ti-MOFs can selectively reduce CO2 to HCOO- under visible-light irradiation with average reaction rates of 150.9, 178.5, and 228.3 μmol·h-1·g-1, where these values are 1.3-2.0 times higher than the system mediated by the initial porphyrin Ti-MOF catalyst. 13C NMR spectroscopy demonstrates that the catalytic product HCOO- anion originates from the reactant CO2. The photocatalytic experiments, electron paramagnetic resonance, and photoluminescence spectra tests showed that porphyrin ligands and Ti-O units can act as catalytic activity centers to realize the conversion of CO2 to HCOO-. This work demonstrated that the combination of porphyrin titanium-based MOF and alkyl hydrophobic groups is an effective way to enhance the stability of titanium-based MOFs and maintain their high photocatalytic performance.

Subnanometric Bismuth Clusters Confined in Pyrochlore-Bi2 Sn2 O7 Enable Remarkable CO2 Photoreduction

The development of highly efficient photocatalysts for conversion of carbon dioxide (CO2 ) with water (H2 O) into chemical fuels is of great importance for energy sustainability and carbon resource utilization. Herein, we demonstrated a facile hydrothermal method for in situ construction of subnanometric Bi metallic clusters in pyrochlore-Bi2 Sn2 O7 frameworks, leading to the remarkable improvements of photocatalytic performances for CO2 reduction into CO in the absence of sacrificial reagent. More specifically, an outstanding CO evolution activity of 114.1 μmol g-1  h-1 has been achieved, more than 20-fold improvement compared with the pristine Bi2 Sn2 O7 (5.7 μmol g-1  h-1 ). Detailed experiments together with in situ characterizations reveal that the spatially confined Bi clusters could significantly promote charge-separation/electron-enrichment and adsorption/activation of CO2 molecules, which provides highly efficient reaction channels to facilitate the generation of *COOH intermediate as well as the subsequent desorption of *CO towards CO formation. These demonstrations provide an important knowledge for precise design and fabrication of highly efficient photocatalysts for CO2 conversion into solar fuels.

Photonic approach in stacked slabs having periodic holes for enhancing photocatalytic activities

Photonic approaches can improve the efficiencies of photo-electrochemical devices towards CO2 reduction and fossil fuel-free societies. In a system consisting of stacked dielectric slabs having periodic holes with each slab coated by photocatalyst layers at both sides, immersed in water, we show that an incident electromagnetic field is effectively confined in the photocatalyst layers, resulting in the enhancement of the photocatalytic activities. In addition, the antireflection effect was engineered by adjusting the distances between the photonic crystal slabs. Numerical results reveal an enhancement factor of 3 for the absorption of electromagnetic fields at the operation frequency in the 3rd band of the dispersion diagram, compared to the bulk photocatalyst. Our system has the feature of periodic holes allowing the movement of reaction products. An analytical model is developed using the revised plane wave method and perturbation theory, which captures the trends observed in numerical results.

Elucidating protonation pathways in CO2 photoreduction using the kinetic isotope effect

The surge in anthropogenic CO2 emissions from fossil fuel dependence demands innovative solutions, such as artificial photosynthesis, to convert CO2 into value-added products. Unraveling the CO2 photoreduction mechanism at the molecular level is vital for developing high-performance photocatalysts. Here we show kinetic isotope effect evidence for the contested protonation pathway for CO2 photoreduction on TiO2 nanoparticles, which challenges the long-held assumption of electron-initiated activation. Employing isotopically labeled H2O/D2O and in-situ diffuse reflectance infrared Fourier transform spectroscopy, we observe H+/D+-protonated intermediates on TiO2 nanoparticles and capture their inverse decay kinetic isotope effect. Our findings significantly broaden our understanding of the CO2 uptake mechanism in semiconductor photocatalysts.

Photocatalytic Conversion of Diluted CO2 into Tunable Syngas via Modulating Transition Metal Hydroxides

The conversion of diluted CO2 into tunable syngas via photocatalysis is critical for implementing CO2 reduction practically, although the efficiency remains low. Herein, we report the use of graphene-modified transition metal hydroxides, namely, NiXCo1-X-GR, for the conversion of diluted CO2 into syngas with adjustable CO/H2 ratios, utilizing Ru dyes as photosensitizers. The Ni(OH)2-GR cocatalyst can generate 12526 μmol g-1 h-1 of CO and 844 μmol g-1 h-1 of H2, while the Co(OH)2-GR sample presents a generation rate of 2953 μmol g-1 h-1 for CO and 10027 μmol g-1 h-1 for H2. Notably, by simply altering the addition amounts of nickel and cobalt in the transition metal composite, the CO/H2 ratios in syngas can be easily regulated from 18:1 to 1:4. Experimental characterization of composites and DFT calculations suggest that the differing adsorption affinities of CO2 and H2O over Ni(OH)2-GR and Co(OH)2-GR play a significant role in determining the selectivity of CO and H2 products, ultimately affecting the CO/H2 ratios in syngas. Overall, these findings demonstrate the potential of graphene-modified transition metal hydroxides as efficient photocatalysts for CO2 reduction and syngas production.

Solar CO2 Reduction Enabled by Cascade Hole Migration

Solar-powered photocatalytic conversion of CO2 to hydrocarbon fuels represents an emerging approach to solving the greenhouse effect. However, low charge separation efficiency, deficiency of surface catalytic active sites, and sluggish charge-transfer kinetics, together with the complicated reaction pathway, concurrently hinder the CO2 reduction. Herein, we show the rational construction of transition metal chalcogenides (TMCs) heterostructure CO2 reduction photosystems, wherein the TMC substrate is tightly integrated with amorphous oxygen-containing cobalt sulfide (CoSOH) by a solid non-conjugated polymer, i.e., poly(vinyl alcohol) (PVA), to customize the unidirectional charge-transfer pathway. In this well-defined multilayered nanoarchitecture, the PVA interim layer intercalated between TMCs and CoSOH acts as a hole-relaying mediator and meanwhile boosts CO2 adsorption capacity, while CoSOH functions as a terminal hole-collecting reservoir, stimulating the charge transport kinetics and boosting the charge separation over TMCs. This peculiar interface configuration and charge transport characteristics endow TMC/PVA/CoSOH heterostructures with significantly enhanced visible-light-driven photoactivity and CO2 conversion. Based on the intermediates probed during the photocatalytic CO2 reduction reaction, the photocatalytic mechanism was determined. Our work would inspire sparkling ideas to mediate the charge transfer over semiconductor for solar carbon neutral conversion.

Regulating Oxygen Vacancies and Fermi Level of Mesoporous CeO2-x for Intensified Built-In Electric Field and Boosted Charge Separation of Cs3 Bi2 Br9 /CeO2-x S-Scheme Heterojunction

Regulating the built-in electric field (BEF) in the heterojunction is is a great challenge in developing high-efficiency photocatalysts. Herein, by tailoring the content of oxygen vacancies in the constituent reduction semiconductor (mesoporous CeO2-x ), a precise Fermi level (EF ) regulation of CeO2-x is realized, yielding an amplified EF gap and intensified BEF in the Cs3 Bi2 Br9 perovskite quantum dots/CeO2-x S-scheme heterojunction. Such an enhanced BEF offers a strong driving force for directional electron transfer, boosting charge separation in the S-scheme heterojunction. As a result, the optimized Cs3 Bi2 Br9 /CeO2-x heterojunction delivers a remarkable CO2 conversion efficiency, with an impressive CO production rate of 80.26 µmol g-1  h-1 and a high selectivity of 97.6%. The S-scheme charge transfer mode is corroborated comprehensively by density functional theory (DFT) calculations, in situ X-ray photoelectron spectroscopy (XPS), and photo-irradiated Kelvin probe force microscopy (KPFM). Moreover, diffuse reflectance infrared Fourier transform spectra (DRIFTS) and theoretical calculations are conducted cooperatively to reveal the CO2 photoreduction pathway.

Hollow Plasmonic P-Metal-N S-Scheme Heterojunction Photoreactor with Spatially Separated Dual Cocatalysts toward Artificial Photosynthesis

Semiconductor-based step-scheme (S-scheme) heterojunctions possess many merits toward mimicking natural photosynthesis. However, their applications for solar-to-chemical energy conversion are hindered by inefficient charge utilization and unsatisfactory surface reactivity. Herein, two synergistic protocols are demonstrated to overcome these limitations based on the construction of a hollow plasmonic p-metal-n S-scheme heterojunction photoreactor with spatially separated dual noble-metal-free cocatalysts. On one side, plasmonic Au, inserted into the heterointerfaces of CuS@ZnIn2 S4 core-shell nanoboxes, not only accelerates the transfer and recombination of useless charges, enabling a more thorough separation of useful ones for CO2 reduction and H2 O oxidation but also generates hot electrons and holes, respectively injects them into ZnIn2 S4 and CuS, further increasing the number of active carriers participating in redox reactions. On the other side, Fe(OH)x and Ti3 C2 cocatalysts, separately located on the CuS and ZnIn2 S4 surface, enrich the redox sites, adjust the reduction potential and pathway for selective CO2 -to-CH4 transformation, and balance the transfer and consumption of photocarriers. As expected, significantly enhanced activity and selectivity in CH4 production are achieved by the smart design along with nearly stoichiometric ratios of reduction and oxidation products. This study paves the way for optimizing artificial photosynthetic systems via rational interfacial channel introduction and surface cocatalyst modification.