Reaction Pathways of the Selective Catalytic Reduction of NO with NH3 on the α-Fe2O3(012) Surface: a Combined Experimental and DFT Study

Modulating the Activity and SO2 Resistance of α-Fe2O3 Catalysts for NH3-SCR of NOx via Crystal Facet Engineering

The development of Fe-based catalysts for the selective catalytic reduction of NOx by NH3 (NH3-SCR of NOx) has garnered significant attention due to their exceptional SO2 resistance. However, the influence of different sulfur-containing species (e.g., ferric sulfates and ammonium sulfates) on the NH3-SCR activity of Fe-based catalysts as well as its dependence on exposed crystal facets of Fe2O3 has not been revealed. This work disclosed that nanorod-like α-Fe2O3 (Fe2O3-NR) predominantly exposing (110) facet performed better than nanosheet-like α-Fe2O3 (Fe2O3-NS) predominantly exposing (001) facet in NH3-SCR reaction, due to the advantages of Fe2O3-NR in redox properties and surface acidity. Furthermore, the results of the SO2/H2O resistance test at a critical temperature of 250 °C, catalytic performance evaluations on Fe2O3-NR and Fe2O3-NS sulfated by SO2 + O2 or deposited with NH4HSO4 (ABS), and systematic characterization revealed that the reactivity of ammonium sulfates on Fe2O3 catalysts to NO(+O2) contributed to their improved catalytic performance, while ferric sulfates showed enhancing and inhibiting effects on NH3-SCR activity on Fe2O3-NR and Fe2O3-NS, respectively; despite this, Fe2O3-NR showed higher affinity for SO2 + O2. This work set a milestone in understanding the NH3-SCR reaction on Fe2O3 catalysts in the presence of SO2 from the aspect of crystal facet engineering.

Spatial Distribution of Brønsted Acid Sites Determines the Mobility of Reactive Cu Ions in the Cu-SSZ-13 Catalyst during the Selective Catalytic Reduction of NOx with NH3

The formation of dimer-Cu species, which serve as the active sites of the low-temperature selective catalytic reduction of NOx with NH3 (NH3-SCR), relies on the mobility of CuI species in the channels of the Cu-SSZ-13 catalysts. Herein, the key role of framework Brønsted acid sites in the mobility of reactive Cu ions was elucidated via a combination of density functional theory calculations, in situ impedance spectroscopy, and in situ diffuse reflectance ultraviolet-visible spectroscopy. When the number of framework Al sites decreases, the Brønsted acid sites decrease, leading to a systematic increase in the diffusion barrier for [Cu(NH3)2]+ and less formation of highly reactive dimer-Cu species, which inhibits the low-temperature NH3-SCR reactivity and vice versa. When the spatial distribution of Al sites is uneven, the [Cu(NH3)2]+ complexes tend to migrate from an Al-poor cage to an Al-rich cage (e.g., cage with paired Al sites), which effectively accelerates the formation of dimer-Cu species and hence promotes the SCR reaction. These findings unveil the mechanism by which framework Brønsted acid sites influence the intercage diffusion and reactivity of [Cu(NH3)2]+ complexes in Cu-SSZ-13 catalysts and provide new insights for the development of zeolite-based catalysts with excellent SCR activity by regulating the microscopic spatial distribution of framework Brønsted acid sites.

Mechanism of interaction between ascorbic acid and soil iron-containing minerals for peroxydisulfate activation and organophosphorus flame retardant degradation

Soil constituents may play an important role in peroxydisulfate (PDS)-based oxidation of organic contaminants in soil. Iron-containing minerals (Fe-minerals) have been found to promote PDS activation for organics degradation. Our study found that ascorbic acid (H2A) could enhance PDS activation by soil Fe-minerals for triphenyl phosphate (TPHP) degradation. Determination and characterization analyses of Fe fractions showed that H2A could induce the reductive dissolution of solid Fe-minerals and the increasing of oxygen vacancies/hydroxyl groups content on Fe-minerals surface. The increasing of divalent Fe (Fe(II)) accelerated PDS activation to generate reactive oxygen species (ROS). Electron paramagnetic resonance (EPR) and quenching studies showed that sulfate radicals (SO4•-) and hydroxyl radicals (HO•) contributed significantly to TPHP degradation. The composition and content of Fe-minerals and soil organic matter (SOM) markedly influenced ROS transformations. Surface-bond and structural Fe played the main role in the production of Fe(II) in reaction system. The high-concentration SOM could result in ROS consumption and degradation inhibition. Density functional theory (DFT) studies revealed that H2A is preferentially adsorbed at α-Fe2O3(012) surface through Fe-O-C bridges rather than hydrogen bonds. After absorption, H atoms on H2A may further be migrated to adjacent O atoms on the α-Fe2O3(012) surface. With the transformation of H atoms to the α-Fe2O3(012) surface, the Fe-O-C bridge is broken and one electron is transferred from the O to Fe atom, inducing the reduction of trivalent Fe (Fe(III)) atom. MS/MS2 analysis, HPLC analysis, and toxicity assessment demonstrated that TPHP was transformed to less toxic 4-hydroxyphenyl diphenyl phosphate (OH-TPHP), diphenyl hydrogen phosphate (DPHP), and phenyl phosphate (PHP) through phenol-cleavage and hydroxylation processes, and even be mineralized in reaction system.

Unexpected Promotion Effect of H2O on the Selective Catalytic Reduction of NOx with NH3 over Cu-SSZ-39 Catalysts

Water molecules commonly inhibit the selective catalytic reduction (SCR) of NOx with NH3 on most catalysts, and water resistance is a long-standing challenge for SCR technology. Herein, by combining experimental measurements and density functional theory (DFT) calculations, we found that water molecules do not inhibit and even promote the NOx conversion to some extent over the Cu-SSZ-39 zeolites, a promising SCR catalyst. Water acting as a ligand on active Cu sites and as a reactant in the SCR reaction significantly improves the O2 activation performance and reduces the overall energy barrier of the catalytic cycle. This work unveils the mechanism of the unexpected promotion effect of water on the NH3-SCR reaction over Cu-SSZ-39 and provides fundamental insight into the development of zeolite-based SCR catalysts with excellent activity and water resistance.

Overview of mechanisms of Fe-based catalysts for the selective catalytic reduction of NOx with NH3 at low temperature

With the increasingly stringent control of NOx emissions, NH3-SCR, one of the most effective de-NOx technologies for removing NOx, has been widely employed to eliminate NOx from automobile exhaust and industrial production. Researchers have favored iron-based catalysts for their low cost, high activity, and excellent de-NOx performance. This paper takes a new perspective to review the research progress of iron-based catalysts. The influence of the chemical form of single iron-based catalysts on their performance was investigated. In the section on composite iron-based catalysts, detailed reviews were conducted on the effects of synergistic interactions between iron and other elements on catalytic performance. Regarding loaded iron-based catalysts, the catalytic performance of iron-based catalysts on different carriers was systematically examined. In the section on iron-based catalysts with novel structures, the effects of the morphology and crystallinity of nanomaterials on catalytic performance were analyzed. Additionally, the reaction mechanism and poisoning mechanism of iron-based catalysts were elucidated. In conclusion, the paper delved into the prospects and future directions of iron-based catalysts, aiming to provide ideas for the development of iron-based catalysts with better application prospects. The comprehensive review underscores the significance of iron-based catalysts in the realm of de-NOx technologies, shedding light on their diverse forms and applications. The hope is that this paper will serve as a valuable resource, guiding future endeavors in the development of advanced iron-based catalysts.

In Situ S-Doping Engineering for Highly Efficient NH3-SCR over Metal-Free Carbon Catalysts: A Novel Synergetic Promotional Mechanism

Cyclic desulfurization-regeneration-denitrification based on metal-free carbon materials is one of the most promising ways to remove NOx and SO2 simultaneously. However, the impact of S-doping induced by the cyclic desulfurization and regeneration (C-S-R) process on the selective catalytic reduction (SCR) is not well understood. Herein, it is demonstrated that the C-S-R process at 500 °C induces in situ S-doping with a significant accumulation of C-S-C structures. NOx conversion was dramatically enhanced from 18.95% of the original sample to 84.55% of the S-doped sample. Density functional theory calculations revealed that the C-S-C structure significantly regulates the electronic structure of the C atom adjacent to the ketonic carbonyl group, thereby significantly altering the NH3 adsorption configuration with superior adsorption capacity. Moreover, S-doping induces an extra electron transfer between the N atom of the NH3 molecule and the C atom of the carbon plane, thereby promoting the activation of NH3 over the ketonic carbonyl group with a reduced energy barrier. This study elucidates a synergetic promotional mechanism between the ketonic carbonyl group and the C-S-C structure for SCR, offering a novel design strategy for high-performance heteroatom-doped carbon catalysts in industrial applications.

Revealing the Formation and Reactivity of Cage-Confined Cu Pairs in Catalytic NOx Reduction over Cu-SSZ-13 Zeolites by In Situ UV-Vis Spectroscopy and Time-Dependent DFT Calculation

The low-temperature mechanism of chabazite-type small-pore Cu-SSZ-13 zeolite, a state-of-the-art catalyst for ammonia-assisted selective reduction (NH3-SCR) of toxic NOx pollutants from heavy-duty vehicles, remains a debate and needs to be clarified for further improvement of NH3-SCR performance. In this study, we established experimental protocols to follow the dynamic redox cycling (i.e., CuII ↔ CuI) of Cu sites in Cu-SSZ-13 during low-temperature NH3-SCR catalysis by in situ ultraviolet-visible spectroscopy and in situ infrared spectroscopy. Further integrating the in situ spectroscopic observations with time-dependent density functional theory calculations allows us to identify two cage-confined transient states, namely, the O2-bridged Cu dimers (i.e., μ-η2:η2-peroxodiamino dicopper) and the proximately paired, chemically nonbonded CuI(NH3)2 sites, and to confirm the CuI(NH3)2 pair as a precursor to the O2-bridged Cu dimer. Comparative transient experiments reveal a particularly high reactivity of the CuI(NH3)2 pairs for NO-to-N2 reduction at low temperatures. Our study demonstrates direct experimental evidence for the transient formation and high reactivity of proximately paired CuI sites under zeolite confinement and provides new insights into the monomeric-to-dimeric Cu transformation for completing the Cu redox cycle in low-temperature NH3-SCR catalysis over Cu-SSZ-13.

Unveiling the Origin of Selectivity in the Selective Catalytic Reduction of NO with NH3 over Oxide Catalysts

The trade-off between activity and selectivity is a century-old puzzle in catalysis. In the selective catalytic reduction of NO with NH₃ (NH₃-SCR), various typical oxide catalysts exhibit distinct characteristics of activity and selectivity: Mn-based catalysts show outstanding low-temperature activity and poor N₂ selectivity, mainly caused by N₂O formation, while Fe- and V-based catalysts possess inverse characteristics. The underlying mechanism, however, has remained elusive. In this study, by combining experimental measurements and density functional theory calculations, we demonstrate that the distinct difference in the selectivity of oxide catalysts is determined by the gap in the energy barriers between N₂ formation and N₂O formation from the consumption of the key intermediate NH₂NO. The gaps in the energy barriers follow the order of α-MnO₂ < α-Fe₂O₃ < V₂O₅/TiO₂, in correspondence with the order of N₂ selectivity of the catalysts. This work discloses the intrinsic link between the target reaction and side reactions in the selective catalytic reduction of NO, providing fundamental insights into the origin of selectivity.

Research landscape and hotspots of selective catalytic reduction (SCR) for NOx removal: insights from a comprehensive bibliometric analysis

Selective catalytic reduction (SCR) has been one of the most efficient and widely used technologies to remove nitrogen oxides (NO_x). SCR research has developed rapidly in recent years, which can be reflected by the dramatic increase of related academic publications. Herein, based on the 10,627 documents from 2001 to 2020 in Web of Science, the global research landscape and hotspots in SCR are investigated based on a comprehensive bibliometric analysis. The results show that SCR research has developed positively; the annul number of articles increase sharply from 246 in 2001 to 1092 in 2020. People's Republic of China and Chinese Academy of Sciences are the most productive country and institution, respectively. The global collaboration is extensive and frequent, while People's Republic of China and USA have the most frequent research cooperation. Applied Catalysis B-Environmental is the leading publication source with 711 records. Five major research areas on SCR are identified and elaborated, including catalyst, reductant, deactivation, mechanism, and others. Zeolite is the most widely studied SCR catalyst, while copper, silver, platinum, and iron are the most popular metal elements in catalyst. Ammonia (NH₃) is dominated among various SCR reductants, while hydrocarbon reductant has gained more attention. Sulfur dioxide (SO₂) and vapor are the two most concerned factors leading to catalyst deactivation, and catalyst regeneration is also an important research topic. Density functional theory (DFT), in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and kinetics are the most widely used methods to conduct mechanism study. The studies on "low temperature," "atomic-scale insight," "elemental mercury," "situ DIRFTS investigation," "arsenic poisoning," "SPOA-34," "Cu-CHA catalyst," "TiO₂ catalyst," and "Ce catalyst" have been the hotspots in recent years.

Revealing the crystal facet effect on N2O formation during the NH3-SCR over α-MnO2 catalysts

The detailed atomic-level mechanism of the effect induced by engineering the crystal facet of α-MnO₂ catalysts on N₂O formation during ammonia-selective catalytic reduction (NH₃-SCR) was ascertained by combining density functional theory (DFT) calculations and thermodynamics/kinetic analysis. The surface energies of α-MnO₂ with specific (100), (110), and (310) exposed planes were calculated, and the adsorptions of NH₃, NO, and O₂ on three surfaces were analyzed. The adsorption energies showed that NH₃ and NO molecules could be strongly adsorbed on the surface of the α-MnO₂ catalyst, while the adsorption of O₂ was weak. Moreover, the key steps in the oxidative dehydrogenation of NH₃ and the formation of NH₂NO as well as dissociation of NH₂ were studied to evaluate the catalytic ability of NH₃-SCR reaction and N₂ selectivity. The results revealed that the α-MnO₂ catalyst exposed with the (310) plane exhibited the best NH₃-SCR catalytic performance and highest N₂ selectivity, mainly due to its low energy barriers in NH₃ dehydrogenation and NH₂NO generation, and difficulty in NH₂ dissociation. This study deepens the comprehension of the facet-engineering of α-MnO₂ on inhibiting N₂O formation during the NH₃-SCR, and points out a strategy to improve their catalytic ability and N₂ selectivity for the low-temperature NH₃-SCR process.

Activity Self-Optimization Steered by Dynamically Evolved Fe3+@Fe2+ Double-Center on Fe2O3 Catalyst for NH3-SCR

Identification of the active centers dynamically stable under the reaction condition is of paramount importance but challenging because of the limited knowledge of steady-state chemistry on catalysts at the atomic level. Herein, focusing on the Fe₂O₃ catalyst for the selective catalytic reduction of NO with NH₃ (NH₃-SCR) as a model system, we reveal quantitatively the self-evolving Fe³⁺@Fe²⁺ (∼1:1) double-centers under the in-situ condition by the first-principles microkinetic simulations, which enables the accurate prediction of the optimal industry operating temperature (590 K). The cooperation of this double-center achieves the self-optimization of catalytic activity and rationalizes the intrinsic origin of Fe₂O₃ catalyzing NH₃-SCR at middle-high temperatures instead of high temperatures. Our findings demonstrate the atomic-level self-evolution of active sites and the dynamically adjusted activity variation of the catalyst under the in-situ condition during the reaction process and provide insights into the reaction mechanism and catalyst optimization.

Unique Compensation Effects of Heavy Metals and Phosphorus Copoisoning over NOx Reduction Catalysts

Selective catalytic reduction (SCR) of NO_x from the flue gas is still a grand challenge due to the easy deactivation of catalysts. The copoisoning mechanisms and multipoisoning-resistant strategies for SCR catalysts in the coexistence of heavy metals and phosphorus are barely explored. Herein, we unexpectedly found unique compensation effects of heavy metals and phosphorus copoisoning over NO_x reduction catalysts and the introduction of heavy metals results in a dramatic recovery of NO_x reduction activity for the P-poisoned CeO₂/TiO₂ catalysts. P preferentially combines with Ce as a phosphate species to reduce the redox capacity and inhibit NO adsorption. Heavy metals preferentially reduced the Brønsted acid sites of the catalyst and inhibited NH₃ adsorption. It has been demonstrated that heavy metal phosphate species generated over the copoisoned catalyst, which boosted the activation of NH₃ and NO, subsequently bringing about more active nitrate species to relieve the severe impact by phosphorus and maintain the NO_x reduction over CeO₂/TiO₂ catalysts. The heavy metals and P copoisoned catalysts also possessed more acidic sites, redox sites, and surface adsorbed oxygen species, which thus contributed to the highly efficient NO_x reduction. This work elaborates the unique compensation effects of heavy metals and phosphorus copoisoning over CeO₂/TiO₂ catalysts for NO_x reduction and provides a perspective for further designing multipoisoning-resistant CeO₂-based catalysts to efficiently control NO_x emissions in stationary sources.

Promotion of the selective catalytic reduction of NOx with NH3 over microporous Cu-SSZ-13 by H2O and OH group at low temperatures: a density functional theory study

The successful commercialization of microporous Cu-SSZ-13 catalysts in the selective catalytic reduction (SCR) of NOx with NH3 has attracted extensive attention and debate on the mechanism of their excellent activity...

Understand the role of redox property and NO adsorption over MnFeOx for NH3-SCR

Widening the operation temperature window of selective catalytic reduction NO by NH3 (NH3-SCR) is a challenge to meet the increasingly stringent emission control regulations of NOx. Hence, MnFeOx with different...

Theoretical Design of Transition Metal-Doped TiO2 for the Selective Catalytic Reduction of NO with NH3 by DFT Calculations

Many transition metal oxides supported on TiO2 have been studied for selective catalytic reduction (SCR) of NO with NH3. However, the trade-off exists between the low-temperature activity and N2 selectivity....

Understanding the roles of copper dopant and oxygen vacancy in promoting nitrogen oxides removal over iron-based catalyst surface: A collaborative experimental and first-principles study

In this work, we proposed a novel strategy of copper (Cu) doping to enhance the nitrogen oxides (NO_x) removal efficiency of iron (Fe)-based catalysts at low temperature through a simple citric acid mixing method, which is critical for its practical application. The doping of Cu significantly improves the deNO_x performance of Fe-based catalysts below 200 °C, and the optimal catalyst is (Cu_0.22Fe_1.78)_1-δO₃, which deNO_x efficiency can reach 100% at 160-240 °C. From the macro aspects, the main reasons for the excellent catalytic activity of the (Cu_0.22Fe_1.78)_1-δO₃ catalyst are the large number of oxygen vacancies (O_vac), appropriate Fe³⁺ and Cu²⁺ contents, stronger surface acidity and redox ability. From the micro aspects, the O_vac plays a key role in enhancing molecular adsorption, oxidation, and the deNO_x reaction over the Fe-based catalyst surface, which promoting order is CuO_vac > O_vac > Cu. This work provides a new insight for the mechanism study of oxygen vacancy engineering and also accelerates the development of CuFe bimetal composite catalysts at low temperature.