Defect-Rich Hierarchical Porous UiO-66(Zr) for Tunable Phosphate Removal

Defective UiO-66-NH2 (Zr) for Simultaneous Adsorption of Phosphate and Pb2+ for Hydrogen Peroxide Purification

Removal of hetero ions from the hydrogen peroxide solution is a crucial step in purifying electronic-grade H2O2. Conventional adsorption materials are challenged to meet the need for the simultaneous adsorption of both anions and cations in solvents. UiO-66 (Zr) modified by acetic acid and amino group for simultaneous adsorption of phosphate and Pb2+ in H2O2 purification was fabricated in this work. The as-prepared defective UiO-66-NH2 (Zr) demonstrated a significant increase in specific surface area and porosity, along with more exposed sites for phosphate and Pb2+ adsorption. The adsorption capacity of De-UiO-66-NH2 for phosphate and Pb2+ in H2O2 solution was 52.28 mg g-1 and 35.4 mg g-1, which is 1.19 times and 1.88 times that of unmodified UiO-66 (Zr), respectively. The trace simultaneous adsorption with both 100 ppb phosphate and Pb2+ showed removal rates of 94.0% and 88.7%, respectively, confirming the practicality of MOF materials in the purification of electronic chemicals. This work highlights the potential of Zr-based MOFs as anionic and cationic simultaneous adsorbents for highly efficient purification of electronic-grade solvents.

Designed Synthesis of Fe/Zr Bimetallic Organic Framework to Enhance the Selective Conversion of H2S to Sulfur

The development of stable and effective catalysts to convert toxic H2S into high value-added sulfur is essential for production safety and environmental protection. However, the inherent defects of traditional iron- and zirconium-based catalysts, such as poor activity, high oxygen consumption, and low sulfur selectivity, limit their further developments and applications. Herein, the Fe-Zr bimetallic organic framework FeUIO-66(x) with different cubic morphologies was synthesized via a facile solvothermal method. The results indicate that the introduction of Fe not only increases the specific surface area and weak L-sites of the catalyst without changing its crystal structure, which provides enough reaction space and more active sites for the adsorption and activation of H2S, but also reduces the activation energy of the reaction, significantly promoting the selective oxidation of H2S. As a result, the as-obtained FeUIO-66(1) catalyst exhibits the highest desulfurization activity and superior durability and water resistance stability, and its H2S conversion and sulfur selectivity within 50 h are 100 and 88%, respectively. More importantly, the structure of the catalyst after the desulfurization reaction is consistent with that of the fresh counterpart. The study offers new insights into the development of effective and stable bimetallic catalysts to eliminate H2S and recycle sulfur.

Selective Phosphate Adsorption Using Topologically Regulated Binary-Defect Metal-Organic Frameworks: Essential Role of Interfacial Electron Mobility

Metal-organic framework (MOF)-modified biochars (BC) have gained recognition as potent adsorbents for phosphate. However, essential insights into the electronic interfacial state of the MOFs remain lacking. In this study, we propose a novel topological transformation strategy to directionally regulate the interfacial electronic states of BC/MOFs composites. The optimized BC/MOFs exhibited an excellent selective phosphate adsorption capacity of 188.68 mg·g-1, coupled with rapid sorption kinetics of 6.81 mg·(g·min0.5)-1 in simulated P-laden wastewater. When challenged with real bioeffluent, such efficacy was still maintained (5 mg·L-1, 25.92 mg·g-1). This superior performance was due to the Fe(III) → Fe(II) transition, promoting electron mobility and leading to the anchoring of Mg(II) to form specific coordination unsaturated sites (Mg-CUS) for phosphate adsorption. Importantly, the simultaneous regulation of binary defects further enhances electron mobility, resulting in the formation of sp3 unequal hybrid orbitals with a stronger internal coupling capability between Mg 3s in Mg-CUS and O 2p in phosphate. Furthermore, the high electron affinity of Mg effectively promotes electron cycling, endowing BC/MOFs with a distinct self-healing capability to facilitate phosphate desorption. The outcomes of this study provide novel perspectives for electronic regulated phosphate adsorption.

Superior Removal of Vanadium(V) from Simulated Groundwater with a Fe-Based Metal-Organic Framework Immobilized on Cotton Fibers

A suitable adsorbent is essential in the process of removing hazardous vanadium(V) from actual groundwater. In this work, MIL-88A(Fe)/cotton (MC) was employed to eliminate V(V) from simulated vanadium-contaminated groundwater. The findings demonstrated that MC exhibited an exceptional performance in removing V(V), displaying a maximum adsorption capacity of 218.71 mg g-1. MC exhibits great promise as an adsorbent for V(V) elimination in an extensive pH range spanning 3 to 11. Even in the presence of high levels of competing ions such as Cl-, NO3-, and SO42-, MC demonstrated remarkable specificity in adsorbing V(V). The results of column experiments and co-occurring ions influence tests indicate that MC is a potential candidate for effectively treating actual vanadium-contaminated groundwater. The effluent could meet the vanadium content restriction of 50 μg L-1 required in China's drinking water sources. Regeneration of MC can be performed easily without experiencing significant capacity loss. The results obtained from this research indicate the promising potential of MC in mitigating vanadium pollution.

Controllable Synthesis of Defective UiO-66 for Efficient Degradation and Detection of Ozone

Metal-organic framework (MOF) structures have gained significant attention for their exceptional catalytic performance in ozone degradation, even under high humidity conditions, which is attributed to the presence of unsaturated metal sites (MOF defects). However, the correlation between MOF defects and catalytic ozone remains ambiguous, and a general approach for the controllable synthesis of high-performance MOF structures is currently lacking. Herein, different defective UiO-66 materials with cluster or ligand defects were obtained by precisely controlling small molecular acid modulators. Their catalytic performance can be analyzed in real time through the specific cataluminescence (CTL) signal of ozone at the interface. The presence of ligand defects was found to be crucial for both catalytic degradation and luminescence of ozone, and the CTL signal exhibited a positive correlation with the endogenous hydroxyl group content in the material (R2 = 0.982), while external humidity further supplemented internal water molecules within the material. Furthermore, theoretical calculations were conducted to compare the adsorption behaviors of ozone on the defective UiO-66 under dry/wet conditions, leading to the proposal of two potential reaction pathways. Subsequently, UiO-66-DA with superior catalytic performance was employed to develop a highly efficient CTL sensor capable of accurately detecting ozone (LOD = 23.3 ppb). This study held significant value in elucidating the reaction site of ozone on MOFs and achieving optimal catalytic effects through the careful selection of modulators and humidity levels.

Removal of Phosphate by Adsorption with 2-Phenylimidazole-Modified Porous ZIF-8: Powder and Chitosan Spheres

Due to rapid socioeconomic development, increased phosphorus concentrations can cause eutrophication of water bodies, with devastating effects on environmental sustainability and aquatic ecosystems. In this study, ZIF-8-PhIm was prepared for phosphorus removal using 2-phenylimidazole via the solvent-assisted ligand exchange (SALE) method. The structure and composition of ZIF-8-PhIm were characterized by various methods, including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), 1H nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), and Brunauer-Emmett-Teller (BET) analysis. Compared to the ZIF-8 material, it exhibited a multistage pore structure with larger pore capacity and pore size, increased hydrophilicity, exposure of more adsorption sites, and also stronger electrostatic interaction. Under optimized conditions (T = 298 K, C0 = 150 mg/L, dose = 0.2 g/L), the adsorption capacity of ZIF-8-PhIm reached 162.93 mg/g, which was greater than that of the ZIF-8 material (92.07 mg/g). The Langmuir isotherm and pseudo-second-order kinetic models were suitable for describing the phosphate adsorption of ZIF-8-PhIm. The main effects of ZIF-8-PhIm on phosphate adsorption were Zn-O-P bonding and electrostatic interactions. It also had good regeneration properties. The ZIF-8-PhIm/CS spheres were prepared using chitosan (CS) as the cross-linking agent. The results of dynamic adsorption experiments on the spheres showed a saturation capacity of 85.69 mg/g and a half-penetration time of 514.15 min at 318 K according to the fitted results.

Pseudopyrolysis of Metal-Organic Frameworks: A Synchronous Nucleation Mechanism to Synthesize Ultrafine Metal Compound Nanoparticles

Metal-Organic frameworks (MOFs) are increasingly being investigated for the synthesis of carbon-supported metal-based ultrafine nanoparticles (UNPs). However, the collapse of the carbon framework and aggregation of metal particles in the pyrolysis process have severely hindered their stability and applications. Here, we report the synchronous nucleation pseudopyrolysis of MOFs to confine Fe/FeO_x UNPs in intact porous carbon nanorods (IPCNs), revealed by in situ transmission electron microscopy experiments and ex situ structure analysis. The pseudopyrolysis mechanism enables strong physical and chemical confinement effects between UNPs and carbon by moderate thermal kinetics and abundant oxygen defects. Further, this strong confinement is greatly beneficial for subsequent chemical transformations to obtain different Fe-based UNPs and excellent electrochemical performance. As a proof of concept, the as-prepared FeSe UNPs in IPCNs show superior lithium storage performance with an ultrahigh and stable capacity of 815.1 mAh g^-1 at 0.1 A g ^-1 and 379.7 mAh g^-1 at 5 A g^-1 for 1000 cycles.

Incorporation of Cu into Goethite Stimulates Oxygen Activation by Surface-Bound Fe(II) for Enhanced As(III) Oxidative Transformation

The dark production of reactive oxygen species (ROS) coupled to biogeochemical cycling of iron (Fe) plays a pivotal role in controlling arsenic transformation and detoxification. However, the effect of secondary atom incorporation into Fe(III) oxyhydroxides on this process is poorly understood. Here, we show that the presence of oxygen vacancy (OV) as a result of Cu incorporation in goethite substantially enhances the As(III) oxidation by Fe(II) under oxic conditions. Electrochemical and density functional theory (DFT) evidence reveals that the electron transfer (ET) rate constant is enhanced from 0.023 to 0.197 s^-1, improving the electron efficiency of the surface-bound Fe(II) on OV defective surfaces. The cascade charge transfer from the surface-bound Fe(II) to O₂ mediated by Fe(III) oxyhydroxides leads to the O-O bond of O₂ stretching to 1.46-1.48 Å equivalent to that of superoxide (^•O₂^-), and ^•O₂^- is the predominant ROS responsible for As(III) oxidation. Our findings highlight the significant role of atom incorporation in changing the ET process on Fe(III) oxyhydroxides for ROS production. Thus, such an effect must be considered when evaluating Fe mineral reactivity toward changing their surface chemistry, such as those noted here for Cu incorporation, which likely determines the fates of arsenic and other redox sensitive pollutants in the environments with oscillating redox conditions.

Adsorption Behavior of a Gd-Based Metal-Organic Framework toward the Quercetin Drug: Effect of the Activation Condition

A carboxylate gadolinium-based metal-organic framework (Gd-MOF) is an exceptional candidate for magnetic resonance imaging agents, but its low drug adsorption capacity hinders this MOF from being used as a theragnostic agent. In this work, the Gd-MOF was synthesized by a simple solvothermal method. Then, different activation situations, including various solvents over different time periods, were applied to enhance the specific surface area of the synthesized MOF. Different characterization analyses such as X-ray diffraction and Brunauer-Emmett-Teller along with experimental quercetin adsorption tests were done to study the crystalline and physical properties of various activated MOFs. In the following, the MOF activated by ethanol for 3 days (3d-E) was chosen as the best activated MOF due to its crystallinity, highest specific surface area, and drug adsorption capacity. More explorations were done for the selected MOF, including the drug adsorption isotherm, thermodynamics, and pH effect of adsorption. The results show that the activation process substantially affects the crystallinity, morphology, specific surface area, and drug adsorption capacity of Gd-MOFs. An optimized activation condition is proposed in this work, which shows an impressive enhancement of the specific surface area of Gd-MOFs just by simple solvent exchange method employment.

Synthesis and Biomedical Applications of Highly Porous Metal-Organic Frameworks

In this review, aspects of the synthesis, framework topologies, and biomedical applications of highly porous metal-organic frameworks are discussed. The term "highly porous metal-organic frameworks" (HPMOFs) is used to denote MOFs with a surface area larger than 4000 m² g^-1. Such compounds are suitable for the encapsulation of a variety of large guest molecules, ranging from organic dyes to drugs and proteins, and hence they can address major contemporary challenges in the environmental and biomedical field. Numerous synthetic approaches towards HPMOFs have been developed and discussed herein. Attempts are made to categorise the most successful synthetic strategies; however, these are often not independent from each other, and a combination of different parameters is required to be thoroughly considered for the synthesis of stable HPMOFs. The majority of the HPMOFs in this review are of special interest not only because of their high porosity and fascinating structures, but also due to their capability to encapsulate and deliver drugs, proteins, enzymes, genes, or cells; hence, they are excellent candidates in biomedical applications that involve drug delivery, enzyme immobilisation, gene targeting, etc. The encapsulation strategies are described, and the MOFs are categorised according to the type of biomolecule they are able to encapsulate. The research field of HPMOFs has witnessed tremendous development recently. Their intriguing features and potential applications attract researchers' interest and promise an auspicious future for this class of highly porous materials.

ZIF-X (8, 67) based nanostructures for gas-sensing applications

ZIF-8 and ZIF-67 are the most investigated zeolitic imidazolate frameworks (ZIFs) materials that have aroused enormous scientific interests in numerous areas of application including electrochemistry, gas storage, separation, and sensors by reason of their fascinating structural properties. Recently, there is a rapidly growing demand for chemical gas sensors for the detection of various analytes in widespread applications including environmental pollution monitoring, clinical analysis, wastewater analysis, industrial applications, food quality, consumer products, and automobiles. In general, the key to the development of superior gas sensors is exploring innovative sensing materials. ZIF-X (8, 67) based nanostructures have demonstrated great potential as ideal sensing materials for high-performance sensing applications. In this review, the general properties and applications of ZIF-X (8, 67) including gas storage and gas adsorption are first summarized, and then the recent progress of ZIF-X (8, 67) based nanostructures for gas-sensing applications and the structure-property correlations are summarized and analyzed.

Multifunctional Fe3O4/TiO2/NH2-UiO-66 with integrated interfacial features for favorable phosphate adsorption

Excessive use and discharge of phosphate are the decisive factors leading to water eutrophication, and adsorption is deemed among the most effective methods in phosphorus capture. This study prepared the...

Tailoring Defect Density in UiO-66 Frameworks for Enhanced Pb(II) Adsorption

Defect engineering of metal organic frameworks offers potential prospects for tuning their features toward particular applications. Herein, two series of defective UiO-66 frameworks were synthesized via changing the concentration of the linker and synthetic temperature of the reaction. These defective materials showed a significant improvement in the capability of Pb(II) removal from wastewater. This strategy for defect engineering not only created additional active sites, more open framework, and enhanced porosity but also exposed more oxygen groups, which served as the adsorption sites to improve Pb(II) adsorption. A relationship among degree of defects, texture features, and performances for Pb(II) removal was successfully developed as a proof-of-concept, highlighting the importance of defect engineering in heavy metal remediation. To investigate the kinetic and adsorption isotherms, we performed adsorption experiments influenced by the time and concentration of the adsorbate, respectively. For the practicality of the materials, the most significant parameters such as pH, temperature, adsorbent concentration, selectivity, and recyclability as well as simulated natural surface water were also examined. This study provides a clue for the researchers to design other advanced defective materials for the enhancement of adsorption performance by tuning the defect engineering.