Organic Coating Reduces Hygroscopic Growth of Phase-Separated Aerosol Particles

Complex Hygroscopic Behavior of Ambient Aerosol Particles Revealed by a Piezoelectric Technique

Understanding the complex interactions between atmospheric aerosols and water vapor in subsaturated regions of the atmosphere is crucial for modeling and predicting aerosol-cloud-radiation-climate interactions. However, the microphysical mechanisms of these interactions for ambient aerosols remain poorly understood. For this study, size-resolved samples were collected from a high-altitude, relatively clean site situated in the Western Ghats of India during the monsoon season, in order to study background and preindustrial processes as a baseline for climate functioning within the context of the most polluted region of the world. Measurements of humidity-dependent mass-based growth factors, hygroscopicity, deliquescence behavior, and aerosol liquid water content (ALWC) were made by a novel approach using a quartz crystal microbalance based on a piezo-electric sensor. The climate-relevant fine-mode aerosols (≤2.5 μm) exhibited strong size-dependent variations in their interactions with water vapor and contributed a high fraction of ALWC. Deliquescence occurred for relatively large aerosols (diameter >180 nm) but was absent for smaller aerosols. The deliquescence relative humidity for ambient aerosols was significantly lower than that of pure inorganic salts, suggesting a strong influence of organic species. Our study establishes an improved approach for accurately measuring aerosol water uptake characteristics of ambient aerosols in the subsaturated regime, aiding in the assessment of radiative forcing effects and improving climate models.

Light absorption enhancement of black carbon and its impact factors during winter in a megacity of the Sichuan Basin, China

Carbonaceous aerosols play a vital role in global climate patterns due to their potent light absorption capabilities. However, the light absorption enhancement effect (Eabs) of black carbon (BC) is still subject to great uncertainties due to factors such as the mixing state, coating material, and particle size distribution. In this study, fine particulate matter (PM2.5) samples were collected in Chengdu, a megacity in the Sichuan Basin, during the winter of 2020 and 2021. The chemical components of PM2.5 and the light absorption properties of BC were investigated. The results revealed that secondary inorganic aerosols and carbonaceous aerosols were the dominant components in PM2.5. Additionally, the aerosol filter filtration-dissolution (AFD) treatment could improve the accuracy of measuring elemental carbon (EC) through thermal/optical analysis. During winter in Chengdu, the absorption enhancement values of BC ranged between 1.56 and 2.27, depending on the absorption wavelength and the mixing state of BC and non-BC materials. The presence of internally mixed BC and non-BC materials significantly contributed to Eabs, accounting for an average of 68 % at 405 nm and 100 % at 635 nm. The thickness of the BC coating influenced Eabs, displaying an increasing-then-decreasing trend. This trend was primarily attributed to the hygroscopic growth and dehydration shrinkage of particulate matter. Nitrate, as the major component of BC coating, played a crucial role in the lensing effect and exhibited fast growth during variation in Eabs. By combining the results from PMF, we identified the secondary formation and vehicle emission as the primary contributors to Eabs. Consequently, this study can provide valuable insights into the optical parameters, which are essential for assessing the environmental quality, improving regional atmospheric conditions, and formulating effective air pollution control strategies.

Underestimated activity-based microplastic intake under scenario-specific exposures

Despite increasing alarms over the health impacts of microplastics (MPs) due to their detection in human organs and feces, precise exposure evaluations remain scarce. To comprehend their risks, there is a distinct need to prioritize quantitive estimates in MP exposome, particularly at the environmentally-realistic level. Here we used a method rooted in real-world MP measurements and activity patterns to determine the daily intake of MPs through inhalation and from ground dust/soil ingestion. We found that nearly 80% of this intake comes from residential sectors, with activity intensity and behavioral types significantly affecting the human MP burden. The data showed a peak in MP exposure for those aged 18-64. When compared to dietary MP intake sources like seafood, salt, and water, we identified a previously underestimated exposure from inhalation and dust/soil ingestion, emphasizing the need for more realistic evaluations that incorporate activity factors. This discovery raises questions about the accuracy of past studies and underscores MP's potential health risks. Moreover, our time-based simulations revealed increased MP intake during the COVID-19 lockdown due to more surface dust ingestion, shedding light on how global health crises may inadvertently elevate MP exposure risks.

Significant impact of water-soluble organic matter on hygroscopicity of fine particles under low relative humidity condition

Uncertainties in estimating the hygroscopicity of bulk aerosols under conditions of low relative humidity (RH) or below the deliquescent RH (DRH) of aerosols remain to be significant, mainly due to the presence of water-soluble organic matter (WSOM). To quantify the contributions of WSOM to aerosol hygroscopicity and associated uncertainties, a field campaign was conducted to measure the hygroscopic growth curve (f(RH)) of bulk aerosols online, dominant chemical compositions in PM2.5 online and offline, and size distributions of the dominant chemical compositions offline during the dry and wet seasons of 2019-2020 in urban Guangzhou of south China. Based on the measured f(RH), the hygroscopicity parameter (κ) of bulk aerosols (κ-f(RH)) exhibits a logarithmic increase with increasing RH until RH reaches 69 %. Beyond this threshold, κ-f(RH) increases very slowly with further increase of RH, reaching 0.32 ± 0.04 during the dry season and 0.31 ± 0.05 during the wet season. The κ of WSOM (κ-WSOM) was further estimated to be 0.22 ± 0.03 and 0.13 ± 0.04 in the dry and wet seasons, respectively, when RH > 69 %. WSOM significantly affects κ-f(RH) by retarding the deliquescence process of aerosols and altering the mass ratio of water-soluble inorganic salts (WSIS) to WSOM within the size range of 0.4-0.9 μm, especially under low RH conditions (<60 %). The κ-f(RH) under low RH conditions was revised based on the logarithmic regression equation between RH and the ratio of measured κ-f(RH) to estimated κ-f(RH>69%). f(RH) of WSIS and WSOM were then corrected using the revised κ-f(RH) under low RH conditions, which showed 22-31 % lower values than those produced by the IMPROVE formulas.

Cloud condensation nuclei activity of internally mixed particle populations at a remote marine free troposphere site in the North Atlantic Ocean

This study reports results from research conducted at the Observatory of Mount Pico (OMP), 2225 m above mean sea level on Pico Island in the Azores archipelago in June and July 2017. We investigated the chemical composition, mixing state, and cloud condensation nuclei (CCN) activities of long-range transported free tropospheric (FT) particles. FLEXible PARTicle Lagrangian particle dispersion model (FLEXPART) simulations reveal that most air masses that arrived at the OMP during the sampling period originated in North America and were highly aged (average plume age > 10 days). We probed size-resolved chemical composition, mixing state, and hygroscopicity parameter (κ) of individual particles using computer-controlled scanning electron microscopy with an energy-dispersive X-ray spectrometer (CCSEM-EDX). Based on the estimated individual particle mass from elemental composition, we calculated the mixing state index, χ. During our study, FT particle populations were internally mixed (χ of samples are between 53 % and 87 %), owing to the long atmospheric aging time. We used data from a miniature Cloud Condensation Nucleus Counter (miniCCNC) to derive the hygroscopicity parameter, κCCNC. Combining κCCNC and FLEXPART, we found that air masses recirculated above the North Atlantic Ocean with lower mean altitude had higher κCCNC due to the higher contribution of sea salt particles. We used CCSEM-EDX and phase state measurements to predict single-particle κ (κCCSEM-EDX) values, which overlap with the lower range of κCCNC measured below 0.15 % SS. Therefore, CCSEM-EDX measurements can be useful in predicting the lower bound of κ, which can be used in climate models to predict CCN activities, especially in remote locations where online CCN measurements are unavailable.

Liquid-Liquid Phase Separation in Single Suspended Aerosol Microdroplets

Liquid-liquid phase separation (LLPS) is ubiquitous in ambient aerosols. This specific morphology exerts substantial impacts on the physicochemical properties and atmospheric processes of aerosols, particularly on the gas-particle mass transfer, the interfacial heterogeneous reaction, and the surface albedo. Although there are many studies on the LLPS of aerosols, a clear picture of LLPS in individual aerosols is scarce due to the experimental difficulties of trapping a single particle and mimicking the suspended state of real aerosols. Here, we investigate the phase separation in individual contactless microdroplets by a self-constructed laser tweezer/Raman spectroscopy system. The dynamic transformation of the morphology of optically trapped droplets over the course of humidity cycles is detected by the time-resolved cavity-enhanced Raman spectra. The impacts of pH and inorganic components on LLPS in aerosols are discussed. The results show that the increasing acidity can enhance the miscibility between the hydrophilic and hydrophobic phases and decrease the separation relative humidity of aerosols. Moreover, the inorganic components also have various impacts on the aerosol phase state, whose influence depends on their different salting-out capabilities. It brings possible implications on the morphology of actual atmospheric particles, particularly for those dominated by internal mixtures of inorganic and organic components.

Molecular Imaging Reveals Two Distinct Mixing States of PM2.5 Particles Sampled in a Typical Beijing Winter Pollution Case

Mixing states of aerosol particles are crucial for understanding the role of aerosols in influencing air quality and climate. However, a fundamental understanding of the complex mixing states is still lacking because most traditional analysis techniques only reveal bulk chemical and physical properties with limited surface and 3-D information. In this research, 3-D molecular imaging enabled by ToF-SIMS was used to elucidate the mixing states of PM_2.5 samples obtained from a typical Beijing winter haze event. In light pollution cases, a thin organic layer covers separated inorganic particles; while in serious pollution cases, ion exchange and an organic-inorganic mixing surface on large-area particles were observed. The new results provide key 3-D molecular information of mixing states, which is highly potential for reducing uncertainty and bias in representing aerosol-cloud interactions in current Earth System Models and improving the understanding of aerosols on air quality and human health.

Visualizing hazardous solids with cryogenic electron microscopy (Cryo-EM)

Recent developments point to exciting potential of cryogenic electron microscopy (cryo-EM) for fundamental environmental research, especially for characterizing environmental samples with a high-water content. As a matter of fact, most environmental materials including soils, sediments, biomass, solid wastes and sludge are hydrated. This perspective provides a brief synopsis of cryo-EM and highlights emerging applications in environmental research. With cryogenic techniques, specimens are preserved by rapid freezing and observed with electron microscopes operating at high-vacuum and low temperature to keep the ice in amorphous state and reduce the effect of radiation damage. So far, cryo-EM has been successfully applied to advance fundamental understanding of physical, chemical and biological mechanisms due to its desirable properties to maintain the native state of hydrated samples and visualize structures at high resolution in three dimensions. The cryo-EM technique also has significant applications to the technology development of pathogen detection, sludge dewatering, waste treatment, and green chemical production from cellular biomass as cellular water content can be clearly observed and manipulated at the single cell level.

Gas-to-Aerosol Phase Partitioning of Atmospheric Water-Soluble Organic Compounds at a Rural Site in China: An Enhancing Effect of NH3 on SOA Formation

Partitioning gaseous water-soluble organic compounds (WSOC) to the aerosol phase is a major formation pathway of atmospheric secondary organic aerosols (SOA). However, the fundamental mechanism of the WSOC-partitioning process remains elusive. By simultaneous measurements of both gas-phase WSOC (WSOCg) and aerosol-phase WSOC (WSOCp) and formic and acetic acids at a rural site in the Yangtze River Delta (YRD) region of China during winter 2019, we showed that WSOCg during the campaign dominantly partitioned to the organic phase in the dry period (relative humidity (RH) < 80%) but to aerosol liquid water (ALW) in the humid period (RH > 80%), suggesting two distinct SOA formation processes in the region. In the dry period, temperature was the driving factor for the uptake of WSOCg. In contrast, in the humid period, the factors controlling WSOCg absorption were ALW content and pH, both of which were significantly elevated by NH₃ through the formation of NH₄NO₃ and neutralization with organic acids. Additionally, we found that the relative abundances of WSOCp and NH₄NO₃ showed a strong linear correlation throughout China with a spatial distribution consistent with that of NH₃, further indicating a key role of NH₃ in WSOCp formation at a national scale. Since WSOCp constitutes the major part of SOA, such a promoting effect of NH₃ on SOA production by elevating ALW formation and WSOCg partitioning suggests that emission control of NH₃ is necessary for mitigating haze pollution, especially SOA, in China.