Polyzwitterionic Hydrogels in Engines Based on the Antipolyelectrolyte Effect and Driven by the Salinity Gradient

Smart salt-responsive thread for highly sensitive microfluidic glucose detection in sweat

Thread-based microfluidic colorimetric sensors have been deemed a potential tool that may be incorporated into textiles for non-invasive sweat analysis. Nevertheless, their poor performance significantly limits their practical uses in sweat glucose detection down to 20 μM. Herein, a microfluidic glucose sensing device containing a salt-responsive thread is developed for the highly sensitive detection of glucose in human sweat. By grafting a zwitterionic polymer brush-which could react to ionic strength by changing the conformation of the polymer chains from the collapsing state to the stretching state-onto the cotton thread, the salt-responsive thread was created. Compared to the pristine cotton thread, the modified thread has better ion-capture capabilities, a more noticeable swelling effect, and a higher ability to absorb water. These enable a significant enrichment of glucose when the saline solution passes through it. The salt-responsive thread was employed to construct a thread/paper-based microfluidic sensing device for the monitoring of glucose in artificial sweat, exhibiting a sensitivity of -0.255 μM-1 and a detection limit of 14.7 μM. In comparison to the pristine cotton thread-based device, the performance is significantly superior. Using a hydrophobic fabric and salt-responsive threads, a glucose-sensing headband was prepared for on-body sweat glucose monitoring. With the use of a smartphone-based image analysis system, the headband can detect the concentration of glucose in a volunteer's perspiration. Using the thread-based salt-responsive zwitterionic polymer brush might offer a novel approach to creating wearable sweat sensors with extremely high sensitivity.

Regeneration and reuse of salt-tolerant zwitterionic polymer fluids by simple salt/water system

Highly-efficient separation of adsorbent and pollutant from chemical sludge is urgent for the recycled materials and chemical resources and minimization of sludge production in industry. Herein, an effortless and cost-efficient salt/water system is developed for efficient zwitterionic polymer/dye separation from chemical sludge. To achieve this aim, a novel salt-tolerant zwitterionic polymer (STZP) is synthesized through etherifying 2-chloro-4,6-bis(4-carboxyphenyl amino)-1,3,5-triazine onto corn starch. It is found that "all-surface-area" adsorption of dye can be achieved by in-situ sol-gel transition of STZP. Spent polymer fluid and solid-state dye can be easily regenerated and separated from sewage sludge by a simple salt/water system. At a high NaCl concentration (225 g/L), the separation factor between zwitterionic polymer and dye is up to 50.4, which is 50 times larger than that of salt-free solution. More importantly, the regenerated polymer fluids exhibit an outstanding reusability ability and can maintain over 92.8% decoloration efficiency for dyeing effluent after multiple adsorption-desorption cycles. This study thus provides a technically feasible and economically acceptable strategy for the recycling and reuse of polymer from hazardous textile sludge waste, greatly promising to achieve zero emissions toward conventional adsorption units.

Tandem Osmotic Engine Based on Hydrogel Particles with Antipolyelectrolyte and Polyelectrolyte Effect Fuelled by Both Salinity Gradient Modes

In this study, we propose a new approach to attain energy by salinity gradient engines with pistons based on hydrogels possessing polyelectrolyte and antipolyelectrolyte effects in a tandem arrangement, providing energy in each salinity gradient mode in a repeatable manner. The swelling of hydrogel with a polyelectrolyte effect and shrinking of hydrogel particles possessing an antipolyelectrolyte effect in desalinated water, and subsequent shrinking of hydrogel with polyelectrolyte and swelling of hydrogel antipolyelectrolyte effect in saline water, generate power in both increasing and decreasing salinity modes. To investigate the energy recovery, we scrutinized osmotic engine assemblies by a setup arrangement of pistons with hydrogel particles, with polyelectrolyte and antipolyelectrolyte effects, in tandem. The energy recovery from the tandem engine setup (calculated based on dry form for each polyelectrolyte polyacrylate-based hydrogel-SPA) and antipolyelectrolyte–sulfobetaine-based gel with methacrylate polymeric backbone-SBE) up to 581 J kg⁻¹ and a mean power of 0.16 W kg⁻¹ was obtained by the tandem setup of SPA and SBE hydrogel containing 3% crosslinking density and particle size of 500 microns with an external load of 3.0 kPa. Exchange of sulfobetaine with methacrylamide (SBAm), the main polymer backbone, revealed a positive increase in energy recovery of 670 J kg⁻¹ with a mean power of 0.19 W kg⁻¹ for the tandem system operating under the same parameters (SPA@SBAm). The energy recovery can be controlled, modulated and tuned by selecting both hydrogels with antipolyelectrolyte and polyelectrolyte effects and their performing parameters. This proof of concept provides blue energy harvesting by contributing both polyelectrolyte and antipolyelectrolyte effects in a single tandem setup; together with easy accessibility (diaper-based materials (SPA)) and known antibiofouling, these properties offer a robust alternative for energy harvesting.

Sulfobetaine-based polydisulfides with tunable upper critical solution temperature (UCST) in water alcohols mixture, depolymerization kinetics and surface wettability

HYPOTHESIS

Synthesis of a new family of polymers having a polydisulfide structure can be conducted from sulfobetaine-based derivative of natural (R)-lipoic acid. A polydisulfide backbone of polymer can be depolymerized by response to external stimuli and sulfobetaine pendant groups ensure the upper critical solution temperature (UCST) behaviour temperatures that can be modulated according to the nature of the solvent and concentration.

EXPERIMENTS

Sulfobetaine-bearing polydisulfides were synthesized from dithiolane derivatives and then characterized. UCST behavior of the polymers in water and in mixtures containing different alcohols (methanol, ethanol, isopropanol) was investigated. The regeneration of monomers from the polymers in response to external stimuli was examined using UV-vis and circular dichroism (CD) spectroscopy. Tunable surface wettability were shown on the grafted polymers.

FINDINGS

Decreasing polarity and/or increasing alcohol percentage in the water mixtures induced an increase in the cloud points of the polymers in the solutions. Thermoresponsive behaviour were repeatable and fully reversible with negligible hysteresis from aggregate to unimer state. The regeneration of monomers by depolymerization was tunable by temperature and sunlight. A thickness dependence on surface wettability was observed on wafers covalently modified with polydisulfides. This is the first report of sulfobetaine-based polydisulfides showing tunable UCST behavior and surface wettability.

Recovered Energy from Salinity Gradients Utilizing Various Poly(Acrylic Acid)-Based Hydrogels

Hydrogels can be utilized to extract energy from salinity gradients when river water mixes with seawater. Saline-sensitive hydrogels exhibit a reversible swelling/shrinking process when they are, alternately, exposed to fresh and saline water. We present a comparison of several poly(acrylic acid)-based hydrogels, including poly(acrylic acid) (PAA), poly(acrylic acid-co-vinylsulfonic acid) (PAA/PVSA), and poly(4-styrenessulfonic acid-co-maleic acid) interpenetrated in a poly(acrylic acid) network (PAA/PSSA-MA). The hydrogels were synthesized by free radical polymerization, copolymerization, and by semi-IPN (interpenetrating polymer network). The hydrogels were placed in a piston-like system to measure the recovered energy. Semi-IPN hydrogels exhibit a much higher recovered energy compared to the copolymer and PAA hydrogel. The recovered energy of 60 g swollen gel was up to 4 J for the PAA/PSSA-MA hydrogel. The obtained energy per gram dried gel was up to 13.3 J/g. The swelling volume of the hydrogels was maintained for 30 cycles without decline in recovered energy.

Electrochemical Investigation of Interfacial Properties of Ti3C2T x MXene Modified by Aryldiazonium Betaine Derivatives

For efficient and effective utilization of MXene such as biosensing or advanced applications, interfacial modification of MXene needs to be considered. To this end, we describe modification of Ti3C2Tx MXene by aryldiazonium-based grafting with derivatives bearing a sulfo- (SB) or carboxy- (CB) betaine pendant moiety. Since MXene contains free electrons, betaine derivatives could be grafted to MXene spontaneously. Kinetics of spontaneous grafting of SB and CB toward MXene was electrochemically examined in two different ways, and such experiments confirmed much quicker spontaneous SB grafting compared to spontaneous CB grafting. Moreover, a wide range of electrochemical methods investigating non-Faradaic and Faradaic redox behavior also in the presence of two redox probes together with contact-angle measurements and secondary ion mass spectrometry (SIMS) confirmed substantial differences in formation and interfacial presentation of betaine layers, when spontaneously grafted on MXene. Besides spontaneous grafting of CB and SB toward MXene, also electrochemical grafting by a redox trigger was performed. Results suggest that electrochemical grafting provides a denser layer of SB and CB on the MXene interface compared to spontaneous grafting of SB and CB. Moreover, an electrochemically grafted SB layer offers much lower interfacial resistance and an electrochemically active surface area compared to an electrochemically grafted CB layer. Thus, by adjusting the SB/CB ratio in the solution during electrochemical grafting, it is possible to effectively tune the redox behavior of an MXene-modified interface. Finally, electrochemically grafted CB and SB layers on MXene were evaluated against non-specific protein binding and compared to the anti-fouling behavior of an unmodified MXene interface.