C12-30 α-Bromo-Chloro "Alkenes": Characterization of a Poorly Identified Flame Retardant and Potential Environmental Implications

Polychlorinated alkanes in indoor environment: A review of levels, sources, exposure, and health implications for chlorinated paraffin mixtures

Polychlorinated n-alkanes (PCAs) are the main components of chlorinated paraffins (CPs) mixtures, that have been commonly grouped into short-chain (SCCPs, C10-13), medium-chain (MCCPs, C14-17), and long-chain (LCCPs, C18-30) CPs. PCAs pose a significant risk to human health as they are broadly present in indoor environments and are potentially persistent, bioaccumulative, and toxic. The lack of specific terminology and harmonization in analytical methodologies for PCA analysis complicates direct comparisons between studies. The present work summarizes the different methodologies applied for the analysis of PCAs in indoor dust, air, and organic films. The large variability between the reviewed studies points to the difficulties to assess PCA contamination in these matrices and to mitigate risks associated with indoor exposure. Based on our review of physicochemical properties of PCAs and previously reported sum of measurable S/M/LCCPs levels, the homologue groups PCAs-C10-13 are found to be mostly present in the gas phase, PCAs-C14-17 in particulate matter and organic films, and PCAs-C≥18 in settled dust. However, we emphasized that mapping PCA sources and distribution in the indoors is highly dependent on the individual homologues. To further comprehend indoor PCA distribution, we described the uses of PCA in building materials and household products to apportion important indoor sources of emissions and pathways for human exposure. The greatest risk for indoor PCAs were estimated to arise from dermal absorption and ingestion through contact with dust and CP containing products. In addition, there are several factors affecting indoor PCA levels and exposure in different regions, including legislation, presence of specific products, cleaning routines, and ventilation frequency. This review provides comprehensive analysis of available indoor PCA data, the physicochemical properties, applied analytical methods, possible interior sources, variables affecting the levels, human exposure to PCAs, as well as need for more information, thereby providing perspectives for future research studies.

Workflow for predictive risk assessments of UVCBs: cheminformatics library design, QSAR, and read-across approaches applied to complex mixtures of metal naphthenates

Substances of unknown or variable composition, complex reaction products, and biological materials (UVCBs) are commonly found in the environment. However, assessing their human toxicological risk is challenging due to their variable composition and many constituents. Metal naphthenate salts are one such category of UVCBs that are the reaction products of naphthenic acids with metals to form complex mixtures. Metal naphthenates are often found or used in household and industrial materials with potential for human exposure, but very few of these materials have been evaluated for causing human health hazards. Herein, we evaluate metal naphthenates using predictions derived from read-across and quantitative structure-activity/property relationship (QSAR/QSPR) models. Accordingly, we first built a computational chemistry library by enumerating the structures of naphthenic acids and derived 11,850 QSAR-acceptable structures; then, we used open and commercial in silico tools on these structures to predict a set of physicochemical properties and toxicity endpoints. We then compared the QSAR/QSPR predictions with available experimental data on naphthenic acids to provide a more complete picture of the contributions of the components to the toxicity profiles of metal naphthenate mixtures. The available systematic acute oral toxicity values (LD50) and QSAR LD50 predictions of all the naphthenic acid components indicated low concern for toxicity. The point of departure predictions for chronic repeated dose toxicity for the naphthenic acid components using QSAR models developed from studies on rats ranged from 25 to 50 mg/kg/day. These values are in good agreement with findings from studies on copper and zinc naphthenates, which had no observed adverse effect levels of 30 and 118 mg/kg/day, respectively. Hence, this study demonstrates how published in silico approaches can be used to identify the potential components of metal naphthenates for further testing, inform groupings of UVCBs such as naphthenates, as well as fill the data gaps using read-across and QSAR models to inform risk assessment.

Application of pattern deconvolution strategies for the estimation of bromochloro alkane concentrations in indoor dust samples

Bromochloro alkanes (BCAs) are a class of flame retardants similar in structure to polychlorinated alkanes (PCAs), which are the major component of short-chain chlorinated paraffins (SCCPs) listed as Persistent Organic Pollutants under the Stockholm Convention. BCAs have recently been detected for the first time in environmental samples. Due to the complete lack of commercially available analytical standards, no method for quantifying BCAs has been reported to date. In this study, 16 custom-synthesised standards with mixed bromine and chlorine halogenation and carbon chain lengths ranging from C10 to C17 were characterized by liquid chromatography and Orbitrap high-resolution mass spectrometry and used to assess the applicability of pattern deconvolution quantification strategies for BCAs in indoor dust. Br1-9 and Cl1-8 BCAs were detected as [M + Cl]- adduct ions among the C10 to C17 standards, as well as numerous PCA homologues. After applying correction factors to account for the presence of PCAs in the standards, triplicate fortification experiments using varied halogenation composition and concentration determined an average measurement accuracy of 81% over the carbon chain lengths studied and coefficient of variance ≤20% between replicates. Overall, approximately 89% of the ΣBCA concentrations quantified in the fortification trials met the European Union Reference Laboratory's accuracy acceptability criteria recommended for PCAs, between 50 and 150%. Application of the BCA pattern deconvolution quantification procedure to seven representative indoor dust samples from the United States of America revealed a low correlation between the homologue distribution in the samples and the prototype standards (R2 ≤ 0.40), which precluded reliable quantification. This study indicates that pattern deconvolution is an appropriate strategy for quantifying BCAs in environmental samples, but that a large set of appropriate mixture standards will be required before more reliable estimates of BCA concentrations can be achieved in indoor dust.

Detection of Bromochloro Alkanes in Indoor Dust Using a Novel CP-Seeker Data Integration Tool

Bromochloro alkanes (BCAs) have been manufactured for use as flame retardants for decades, and preliminary environmental risk screening suggests they are likely to behave similarly to polychlorinated alkanes (PCAs), subclasses of which are restricted as Stockholm Convention Persistent Organic Pollutants (POPs). BCAs have rarely been studied in the environment, although some evidence suggests they may migrate from treated-consumer materials into indoor dust, resulting in human exposure via inadvertent ingestion. In this study, BCA-C14 mixture standards were synthesized and used to validate an analytical method. This method relies on chloride-enhanced liquid chromatography-electrospray ionization-Orbitrap-high resolution mass spectrometry (LC-ESI-Orbitrap-HRMS) and a novel CP-Seeker integration software package for homologue detection and integration. Dust sample preparation via ultrasonic extraction, acidified silica cleanup, and fractionation on neutral silica cartridges was found to be suitable for BCAs, with absolute recovery of individual homologues averaging 66 to 78% and coefficients of variation ≤10% in replicated spiking experiments (n = 3). In addition, a total of 59 indoor dust samples from six countries, including Australia (n = 10), Belgium (n = 10), Colombia (n = 10), Japan (n = 10), Thailand (n = 10), and the United States of America (n = 9), were analyzed for BCAs. BCAs were detected in seven samples from the U.S.A., with carbon chain lengths of C8, C10, C12, C14, C16, C18, C24 to C28, C30 and C31 observed overall, though not detected in samples from any other countries. Bromine numbers of detected homologues in the indoor dust samples ranged Br1-4 as well as Br7, while chlorine numbers ranged Cl2-11. BCA-C18 was the most frequently detected, observed in each of the U.S.A. samples, while the most prevalent degrees of halogenation were homologues of Br2 and Cl4-5. Broad estimations of BCA concentrations in the dust samples indicated that levels may approach those of other flame retardants in at least some instances. These findings suggest that development of quantification strategies and further investigation of environmental occurrence and health implications are needed.

Tetraphenylphosphonium Chloride-Enhanced Ionization Coupled to Orbitrap Mass Spectrometry for Sensitive and Non-targeted Screening of Polyhalogenated Alkyl Compounds from Limited Serum

Although many types of halogenated compounds are known to bioaccumulate in humans, few are routinely biomonitored and many have remained uncharacterized in human exposome studies due to a lack of high-sensitivity and high-resolution analytical methods. In this study, we discovered tetraphenylphosphonium chloride (Ph₄PCl, 10 μM) as a simple additive to the mobile phase, which enhanced the ionizations of polyhalogenated alkyl compounds (such as organochlorinated pesticides [OCPs], chlorinated paraffins [CPs], dechlorane plus [DPs], and some brominated flame retardants [BFRs]) in the form [M + Cl]^- and boosted mass spectrometry responses by an average of 1-3 orders of magnitude at a resolution of 140,000. Ph₄PCl-enhanced ionization coupled with a halogenation-guided screening process was used to establish a sensitive and non-targeted method that required only single-step sample preparation and identified Cl- and/or bromine-containing alkyl compounds. The method enabled the identification of ∼700 polyhalogenated compounds from 200 μL of human serum, 240 of which were known compounds: 33 short-chain CPs, 52 median-chain CPs, 97 long-chain CPs, 22 very short-chain CPs (vSCCPs), 19 OCPs, 13 DPs, and 4 BFRs. We also identified 325 emerging contaminants (34 unsaturated CPs, 285 chlorinated fatty acid methyl esters [CFAMEs], and 6 chloro-bromo alkenes) and 130 new contaminants (114 oxygen-containing CPs, 2 hexachlorocyclohexane structural analogs, and 11 amino-containing and 3 nitrate-containing chlorinated compounds). The full scan results highlighted the dominance of CPs, CFAMEs, vSCCPs, and dichlorodiphenyltrichloroethanes in the serum samples. Ph₄PCl-enhanced ionization enabled the sensitive and non-targeted identifications of polyhalogenated compounds in small volumes of biological fluid.

Semiquantitative Characterization of Bromo-chloro Paraffins and Olefins in the Australian Environment

A semiquantitative high-resolution mass spectrometry method was developed and applied to assess the occurrence of bromo-/chloro paraffins (BCPs) and olefins (BCOs) in the environment. More than 400 possible BCPs and BCO congener groups were detected in dust, air, and sewage sludge samples collected from Australia. Median chain analytes with the number of halogen atoms <7 (C_nH_mCl_xBr_y, 14 ≤ n ≤ 17, x + y < 7) prevailed in the dust and sludge samples, while short chain analytes (C_nH_mCl_xBr_y, 10 ≤ n ≤ 13, x + y < 7) predominated the air samples. The estimated concentrations of ∑BCPs and ∑BCOs in dust and sludge were approximately 20% that of the chlorinated paraffins (CPs) present, with the median concentrations of 5.4 μg/g (dust) and 0.18 μg/g (sludge) for ∑BCPs and 22 μg/g (in dust) and 0.50 μg/g (sludge) for BCOs. In the air samples, the concentrations of BCPs (0.020 pg/m³) and BCOs (0.032 pg/m³) were 3-4 orders of magnitudes lower than the concentrations of CPs (790 pg/m³). Significant correlations (P < 0.001) were found between the concentration of CPs, BCPs, and BCOs in all the matrices.

The Next Frontier of Environmental Unknowns: Substances of Unknown or Variable Composition, Complex Reaction Products, or Biological Materials (UVCBs)

Substances of unknown or variable composition, complex reaction products, or biological materials (UVCBs) are over 70 000 "complex" chemical mixtures produced and used at significant levels worldwide. Due to their unknown or variable composition, applying chemical assessments originally developed for individual compounds to UVCBs is challenging, which impedes sound management of these substances. Across the analytical sciences, toxicology, cheminformatics, and regulatory practice, new approaches addressing specific aspects of UVCB assessment are being developed, albeit in a fragmented manner. This review attempts to convey the "big picture" of the state of the art in dealing with UVCBs by holistically examining UVCB characterization and chemical identity representation, as well as hazard, exposure, and risk assessment. Overall, information gaps on chemical identities underpin the fundamental challenges concerning UVCBs, and better reporting and substance characterization efforts are needed to support subsequent chemical assessments. To this end, an information level scheme for improved UVCB data collection and management within databases is proposed. The development of UVCB testing shows early progress, in line with three main methods: whole substance, known constituents, and fraction profiling. For toxicity assessment, one option is a whole-mixture testing approach. If the identities of (many) constituents are known, grouping, read across, and mixture toxicity modeling represent complementary approaches to overcome data gaps in toxicity assessment. This review highlights continued needs for concerted efforts from all stakeholders to ensure proper assessment and sound management of UVCBs.

Short- and medium-chain chlorinated paraffins in commercial complementary baby food produced in different European countries: Occurrence, congener group profiles, portion-based dietary intake, and risk assessment

This study was performed to evaluate the presence of chlorinated paraffins (CPs) in complementary baby food from different European countries, to assess portion-based dietary intake of CPs, and to characterize possible risks to children arising from CPs uptake. In total, 86 baby food samples from 22 countries were grouped into eight food-type categories considering the WHO classification. In six out of eight sample categories, predominance of medium-chain CPs (MCCPs) concentrations over short-chain CPs (SCCPs) was observed and, contrary to expectations, samples that contained ingredients of animal origin (e.g., meat or fish) did not display elevated CPs levels. The median ∑_CPs concentrations for selected sample categories ranged from 0.8 ng g^-1 for desert to 2.8 ng g^-1 found in dry cereal and porridge subgroups, while the highest CPs concentration of 387 ng g^-1 was observed in dry porridge. Among the selected groups of baby foods, portion-based intake of ∑_CPs varied from 1.0 to 43.6 ng kg^-1 body weight (b.w.) while exposure estimations indicated that portion-based dietary exposure through consumption of complementary baby food was the highest for infants aged 3-12 months due to the lower body weight. The risk characterization according to the European Food Safety Authority (EFSA) approach showed that the margin of exposure (MOE) figures higher than the critical value for ∑_CPs, indicating that the dietary exposures through consumption of complementary baby food are unlikely to be of significant health concern for children. However, it should be pointed out that the performed risk assessment covered only SCCPs and MCCPs, while the occurrence of other groups from CPs and CPs related compounds (e.g., very short-chain CPs, chlorinated alkenes, or long-chain CPs (LCCPs)) was not addressed.

Enhancing Scientific Support for the Stockholm Convention's Implementation: An Analysis of Policy Needs for Scientific Evidence

The Stockholm Convention is key to addressing the global threats of persistent organic pollutants (POPs) to humanity and the environment. It has been successful in identifying new POPs, but its national implementation remains challenging, particularly by low- and middle-income Parties. Concerted action is needed to assist Parties in implementing the Convention's obligations. This analysis aims to identify and recommend research and scientific support needed for timely implementation of the Convention. We aim this analysis at scientists and experts from a variety of natural and social sciences and from all sectors (academia, civil society, industry, and government institutions), as well as research funding agencies. Further, we provide practical guidance to scientists and experts to promote the visibility and accessibility of their work for the Convention's implementation, followed by recommendations for sustaining scientific support to the Convention. This study is the first of a series on analyzing policy needs for scientific evidence under global governance on chemicals and waste.

Which of the (Mixed) Halogenated n-Alkanes Are Likely To Be Persistent Organic Pollutants?

Short-chain polychlorinated n-alkanes are ubiquitous industrial chemicals widely recognized as persistent organic pollutants. They represent only a small fraction of the 184,600 elemental compositions (C_10-25) and the myriad isomers of all possible (mixed) halogenated n-alkanes (PXAs). This study prioritizes the PXAs on the basis of their potential to persist, bioaccumulate, and undergo long-range transport guided by quantitative structure-property relationships (QSPRs), density functional theory (DFT), chemical fate models, and partitioning space. The QSPR results narrow the list to 966 elemental compositions, of which 352 (23 Br, 83 Cl/F, 119 Br/Cl, and 127 Br/F) are likely constituents of substances used as lubricants, plasticizers, and flame retardants. Complementary DFT calculations suggest that an additional 1367 elemental compositions characterized by a greater number of carbon and fluorine atoms but fewer chlorine and bromine atoms may also pose a risk. The results of this study underline the urgent need to identify and monitor these suspected pollutants, most appropriately using mass spectrometry. We estimate that the resolving power required to distinguish ∼74% of the prioritized elemental compositions from the most likely interferents, i.e., chlorinated alkanes, is approximately 60,000 (full width at half-maximum). This indicates that accurate identification of the PXAs is achievable using most high-resolution mass spectrometers.

Complex Mixtures of Chlorinated Paraffins Found in Hand Wipes of a Norwegian Cohort

Up to 18000 ng of total chlorinated paraffins (CPs) was found in hand wipes of individual adult participants in a Norwegian cohort study (n = 60), with a geometric mean (SD) value of 870 (2700) ng. The CPs covered a wide range of alkane chain lengths from C₇ to C₄₈ with variable chlorine substitution. Complex mixtures of very-short-chain (vSCCPs, C_<10), short-chain (SCCPs, C_10-13), medium-chain (MCCPs, C_14-17), and long-chain (LCCPs, C_>17) CPs were found, contributing on average 0.3%, 20%, 58%, and 22%, respectively, of the total CPs. Significant positive correlations were found between CP levels and factors related to the indoor environment and product use, including living in a house/apartment built before the ban of SCCPs, having a sofa, the number of TVs in the home, and owning a car, which mirrors CP usage as flame retardants and/or plasticizers in consumer products. Compared to previous studies of other organic contaminants in hand wipe samples from the same cohort, CPs were the most abundant flame retardants. This is the first report of CPs in hand wipes, and dermal exposure based on these data suggested that hand contact could be an important human exposure pathway for LCCPs.