Beyond Energy Balance: Environmental Trade-Offs of Organics Capture and Low Carbon-to-Nitrogen Ratio Sewage Treatment Systems

Flexible Carbon Source Regulation for Mitigating Greenhouse Gas Emissions in Full-Scale Wastewater Treatment

Achieving carbon neutrality in wastewater treatment plants (WWTPs) by 2060 requires effective strategies to mitigate greenhouse gas (GHG) emissions. This study explores the potential of flexible carbon source regulation to reduce GHG emissions while improving the nutrient removal efficiency under varying influent conditions. A plant-wide model was developed, calibrated with one year of hourly monitoring data, to quantify GHG emissions in a full-scale WWTP. We evaluated three carbon regulation strategies: anaerobic digestion (AD), short fermentation (SF), and adaptive carbon source regulation (ACSR). Results show that AD was most effective in high carbon-to-nitrogen (C/N) ratios, reducing GHG emissions by 29.2%. SF performed best at low C/N ratios, reducing N2O emissions by 56.3%. The ACSR strategy, which dynamically adjusts between AD and SF based on influent C/N, achieved a total GHG reduction of 18.2% compared with the base strategy (conventional activated sludge process with mechanical dewatering and landfill disposal of waste sludge). Seasonal variations significantly impacted emissions (p < 0.001), while C/N ratios, although not statistically significant in isolation, play a crucial role in influencing N2O emissions and sludge production, emphasizing the need for adaptive carbon allocation. This study underscores the viability of plant-wide, data-driven carbon source regulation as an integrated approach to achieving net-zero emissions in WWTPs, effectively addressing diverse GHG emission sources within the system.

Integrated urban wastewater management through on-site generation and application of ferrous carbonate

Integrated urban water management is an increasingly popular concept that cost-effectively maximizes system-wide performance by holistically considering all aspects of water and wastewater sectors. An innovative technology enabling production of high-quality bioenergy and an iron salt, ferrous carbonate (FeCO3), represents a significant opportunity for integrated urban water management. This study experimentally evaluates the effect of in-sewer FeCO3 dosing on the performance of sewers and the downstream wastewater treatment plants. Two continuous-flow laboratory-scale urban wastewater systems, each consisting of sewer reactors, a sequencing batch wastewater treatment reactor, and an anaerobic digester, were operated in parallel. After establishing comparable performance, one served as the control without any chemical dosing, while the other received a dosing of 10mgFe/L of FeCO3 in its sewer reactors. Compared to the control, the FeCO3-dosed experimental system reduced dissolved sulfide concentrations by 32.2±3.3% (at 0.58±0.05mgS/mgFe, or 1.0molFe/molS) in sewer reactors, decreased phosphate concentrations by 38.3%±3.2% (at 0.37±0.04mgP/mgFe, or 1.5molFe/molP) in sequencing batch reactors, and lowered dissolved sulfide concentrations by 72.0±4.2% (18.9±2.4mgS/L) in the anaerobic sludge digester. Iron accumulated in the sludge and improved sludge settleability by 33.9±5.5% and enhanced dewaterability of anaerobically digested sludge by 15.9±2.0%. The findings indicate multiple benefits from the integrated use of FeCO3, potentially being as a substitute for the currently used iron salts in urban wastewater systems.

Iron driven organic carbon capture, pretreatment, recovery and upgrade in wastewater: Process technologies, mechanisms, and implications

Wastewater treatment plants face significant challenges in transitioning from energy-intensive systems to carbon-neutral, energy-saving systems, and a large amount of chemical energy in wastewater remains untapped. Iron is widely used in modern wastewater treatment. Research shows that leveraging the coupled redox relationship of iron and carbon can redirect this energy (in the form of carbon) towards resource utilization. Therefore, re-examining the application of iron in existing wastewater carbon processes is particularly important. In this review, we investigate the latest research progress on iron for wastewater carbon flow restructuring. During the iron-based chemically enhanced primary treatment (CEPT) process, organic carbon is captured into sludge and its bioavailability is enhanced through iron-based advanced oxidation processes (AOP) pretreatment, further being recovered or upgraded to value-added products in anaerobic biological processes. We discuss the roles and mechanisms of iron in CEPT, AOP, anaerobic biological processes, and biorefining in driving organic carbon conversion. The dosage of iron, as a critical parameter, significantly affects the recovery and utilization of sludge carbon resources, particularly by promoting effective electron transfer. We propose a pathway for beneficial conversion of wastewater organic carbon driven by iron and analyze the benefits of the main products in detail. Through this review, we hope to provide new insights into the application of iron chemicals and current wastewater treatment models.

Weak magnetic field promotes denitrification by stimulating ferromagnetic ion-containing metalloprotein expression

Weak magnetic field (WMF) has been recognized to promote biological denitrification processes; however, the underlying mechanisms remain largely unexplored, hindering the optimization of its effectiveness. Here, we systematically investigated the effects of WMF on denitrification performance, enzyme activity, microbial community, and metaproteome in packed bed bioreactors treating high nitrate wastewater under different WMF intensities and C:N ratios. Results showed that WMFs significantly promoted denitrification by consistently stimulating the activities of denitrifying reductases and NAD+/NADH biosynthesis across decreasing C:N ratios. Reductases and electron transfer enzymes involved in denitrification were overproduced due to the significantly enriched overexpression of ferromagnetic ion-containing (FIC) metalloproteins. We also observed WMFs' intensity-dependent selective pressure on microbial community structures despite the effects being limited compared to those caused by changing C:N ratios. By coupling genome-centric metaproteomics and structure prediction, we found the dominant denitrifier, Halomonas, was outcompeted by Pseudomonas and Azoarcus under WMFs, likely due to its structural deficiencies in iron uptake, suggesting that advantageous ferromagnetic ion acquisition capacity was necessary to satisfy the substrate demand for FIC metalloprotein overproduction. This study advances our understanding of the biomagnetic effects in the context of complex communities and highlights WMF's potential for manipulating FIC protein-associated metabolism and fine-tuning community structure.

Iron Recycle-Driven Organic Capture and Sidestream Anaerobic Membrane Bioreactor for Revolutionizing Bioenergy Generation in Municipal Wastewater Treatment

The practicality of intensifying organic matter capture for bioenergy recovery to achieve energy-neutral municipal wastewater treatment is hindered by the lack of sustainable methods. This study developed innovative processes integrating iron recycle-driven organic capture with a sidestream anaerobic membrane bioreactor (AnMBR). Iron-assisted chemically enhanced primary treatment achieved elemental redirection with 75.2% of chemical oxygen demand (COD), 20.2% of nitrogen, and 97.4% of phosphorus captured into the sidestream process as iron-enhanced primary sludge (Fe-PS). A stable and efficient biomethanation of Fe-PS was obtained in AnMBR with a high methane yield of 224 mL/g COD. Consequently, 64.1% of the COD in Fe-PS and 48.2% of the COD in municipal wastewater were converted into bioenergy. The acidification of anaerobically digested sludge at pH = 2 achieved a high iron release efficiency of 96.1% and a sludge reduction of 29.3% in total suspended solids. Ultimately, 87.4% of iron was recycled for coagulant reuse, resulting in a theoretical 70% reduction in chemical costs. The novel system evaluation exhibited a 75.2% improvement in bioenergy recovery and an 83.3% enhancement in net energy compared to the conventional system (primary sedimentation and anaerobic digestion). This self-reliant and novel process can be applied in municipal wastewater treatment to advance energy neutrality at a lower cost.

Anaerobic Wastewater Treatment and Potable Reuse: Energy and Life Cycle Considerations

Anaerobic secondary treatment has the potential to facilitate energy-positive operations at wastewater treatment plants, but post-treatment of the anaerobic effluent is needed to recover dissolved methane and nutrients and remove sulfide. In this study, a life cycle assessment was conducted to compare hypothetical full-scale wastewater treatment trains and direct potable reuse trains that combine the staged anaerobic fluidized membrane bioreactor (SAF-MBR) with appropriate post-treatment. We found that anaerobic wastewater treatment trains typically consumed less energy than conventional aerobic treatment, but overall global warming potentials were not significantly different. Generally, recovery of dissolved methane for energy production resulted in lower life cycle impacts than microbial transformation of methane, and microbial oxidation of sulfide resulted in lower environmental impacts than chemical precipitation. Use of reverse osmosis to produce potable water was also found to be a sustainable method for nutrient removal because direct potable reuse trains with the SAF-MBR consumed less energy and had lower life cycle impacts than activated sludge. Moving forward, dissolved methane recovery, reduced chemical usage, and investments that enable direct potable reuse have been flagged as key research areas for further investigation of anaerobic secondary treatment options.

Water-climate change extended nexus contribution to social welfare and environment-related sustainable development goals in China

Climate change exacerbates uncertainties in water resource management, water supply, and treatment that are energy intensive and then exert great pressure on climate change mitigation; hence, interrelated and contradictory characteristics within the water-climate change (WC) nexus system are needed to be studied. The nexus thinking and coordination of WC would impact many realistic practices and assist in sustainable socioeconomic development since traditional single-target policies have sometimes been out of function. Hence, the ability to direct water production and use as well as climate change mitigation has become a hotspot recently. Furthermore, we find that there has been no complete research on reviewing the impacts of the WC nexus in different areas on the Sustainable Development Goals (SDGs). Hence, this paper builds a core nexus of WC and then analyzes those effects on social and environmental aspects in many areas, including sewage treatment, energy transition, waste treatment, land management, and ocean management. This paper discusses how WC interlinkages are utilized to realize SDGs in those areas. Moreover, uncertainties derived from exogenous hydrology, climate change, and anthropogenic endogenous systems for realistic problems appeal to gradually increasing concern. Finally, implications offer valuable guidelines for integrated management of water and carbon emissions, as well as sustainable socioeconomic development in the future.

Seasonal and annual energy efficiency of mainstream anaerobic membrane bioreactor (AnMBR) in temperate climates: Assessment in onsite pilot plant and estimation in scaled-up plant

The seasonal and annual energy efficiency of mainstream anaerobic membrane bioreactor (AnMBR) was first assessed in an onsite pilot plant (15 m³/d) and then estimated in a scaled-up plant (10,000 m³/d) in temperate climates (15-25 °C). It was found that the annual net electricity demand was 0.100 and 0.090 kWh/m³, and the annual net energy (electricity + heat) demand was -0.158 and -0.309 kWh/m³ under the dissolved methane recovery condition and the non-recovery condition, respectively, demonstrated that the application of mainstream AnMBR in temperate climates is electricity saving and energy positive. The energy efficiency of the AnMBR decreased with temperature drop due to the reduction of methane production, and the increase in biogas sparging to mitigate membrane fouling. Since approximately 26.7%-39.7% of input COD remained in sludge, attention should be paid to recovering this potential energy to improve the overall energy performance of the mainstream AnMBR plants in future.

Effect of addition sites on bioaugmentation of tea polyphenols-NZVI/PE composite packing: Nitrogen removal efficiency and service life

Although efficient improvement of the nitrogen removal from wastewater by adding iron was achieved in wastewater process, the influence mechanism of addition sites is unclear. The study was based on the A/O-MBR treating simulated domestic wastewater, and tea polyphenol-nano zero-valent iron/polyethylene packing (TP-NZVI/PE) was added into the anoxic tank, aerobic tank and membrane effluent end of the process, respectively. The effect of the different addition sites on the nitrogen removal performance of A/O-MBR was investigated. Combine with the corrosion rate of NZVI on the packing surface to optimize TP-NZVI/PE addition site. The enhancement mechanism of TP-NZVI/PE under different addition site was explored through the calculation of the materials balance (carbon, nitrogen, phosphorus). The results showed that the pollutant removal of A/O-MBR was significantly increased with the TP-NZVI/PE added. In particular, the TP-NZVI/PE was added into the aerobic tank, and the pollutant removal rate was increased 31.71% (TN) and 53.00% (total phosphorus), respectively. Meanwhile, the service life of TP-NZVI/PE in the aerobic tank was 66 days. The anti-oxidation and dispersion of NZVI was improved with the encapsulation of tea polyphenols and support of packing, and it also played a certain slow-release effect, so that the service life of NZVI was further prolonged in aerobic condition. Combined with the material balance analysis, the result showed that the environmental structure made diversity in the aerobic tank by added the TP-NZVI/PE, and the simultaneous nitrification and denitrification process was achieved. The dependence of the denitrification process on the carbon source was greatly reduced. Besides, it promoted the adsorption and chemical precipitation process of the system for phosphor pollutant and achieved the denitrifying phosphorus removal performance.

Denitrifying bacteria immobilized magnetic mycelium pellets bioreactor: A new technology for efficient removal of nitrate at a low carbon-to-nitrogen ratio

This study integrated spores and magnetite (Fe₃O₄) to form magnetic mycelium pellets (MMP) as bio-carriers immobilized with denitrifying bacteria in a bioreactor. Different carbon-to-nitrogen (C/N) ratios and hydraulic retention time (HRT) were established for investigating the performance of the bioreactor. The nitrate removal efficiency was 98.14% at C/N = 2.0 and HRT = 6 h. Gas chromatography (GC) results indicated that the main component of the produced gas was N₂. Fe₃O₄ was well-integrated into MMP according to X-ray diffraction (XRD) results and infrared spectrometer (FTIR) analysis. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) showed that bacteria were successfully immobilized on MMP. Fluorescence excitation-emission matrix (EEM) indicated that functional bacteria GF2 might enhance the metabolic activity of the microbial community in the bioreactor and microbial activity was highest at C/N = 2.0. Pseudomonas stutzeri sp. GF2 might be immobilized and had a major role in the bioreactor according to high throughput sequencing results.

Combining Process Modelling and LCA to Assess the Environmental Impacts of Wastewater Treatment Innovations

Alternative wastewater treatment (WWT) technologies with lower environmental impacts seem to be the way forward in the pursuit of sustainable wastewater treatment plants (WWTPs). Process modelling of material and energy flows together with life-cycle assessment (LCA) can help to better understand these impacts and show the right direction for their development. Here, we apply this combined approach to three scenarios: conventional WWT; conventional WWT + chemically enhanced primary treatment (CEPT); conventional WWT + CEPT + side stream partial nitritation/anammox (PN/A). For each scenario, equations were developed to calculate chemical oxygen demand and nitrogen flow (solid and dissolved form) through the WWTP and to estimate the energy demands of its unit operations. LCA showed that the main environmental impact categories for all scenarios were global warming potential (GWP), eutrophication potential (EP) and marine aquatic eco-toxicity potential (MAETP). Compared with conventional WWT, CEPT and CEPT combined with PN/A resulted in a higher sum of normalized and weighed environmental indicators, by 19.5% and 16.4%, respectively (20.0% and 18.3% including biogenic carbon). Interestingly, the environmentally positive features of the alternative scenarios were often traded-off against other increased negative impacts. This suggests that further development is needed to consider these technologies a sustainable alternative.