Substituent Effects on the Direct Photolysis of Benzotrifluoride Derivatives

Photochemical degradation of bisphenol S and its tetrahalogenated derivatives in water

Bisphenol S (BPS), a widely used plasticizer, is known to have potential endocrine disrupting effects to organisms. Its tetrahalogenated derivatives, tetrachlorobisphenol S (TCBPS) and tetrabromobisphenol S (TBBPS), are flame retardants exhibiting high neurodevelopmental toxicity and cytotoxicity. Halogen substitution has been shown to significantly affect the optical and photochemical properties of organic compounds. In this study, we conducted a comparative investigation into the photochemical behaviors of BPS, TCBPS, and TBBPS in aqueous solutions under both laboratory UV and natural sunlight irradiation. Spectroscopic titration results indicated that the pKa of TCBPS (4.16) and TBBPS (4.13) are approximately 3.7 units smaller than that of BPS (7.85), indicating that the halogenated derivatives are mainly present as the phenolate anions under circumneutral conditions. The halogen substituents also cause a significant bathochromic shift in the absorption spectra of TCBPS and TBBPS compared to BPS, leading to the enhanced absorption of sunlight. Meanwhile, TCBPS and TBBPS showed higher quantum yields than BPS, attributed to the "heavy atom" effect of halogen substituents. GCSOLAR modeling predicted half-lives for BPS, TCBPS, and TBBPS in surface water in Nanjing (32°2'7.3''N, 118°50'21''E) under noon sunlight in clear mid-autumn days as 810.2, 3.4, and 0.7 min, respectively. Toxicity evaluation suggest potential ecological risks of BPS/TCBPS/TBBPS and their photoproducts to aquatic organisms. Our findings highlight direct photolysis as an important mechanism accounting for the attenuation of tetrahalogenated bisphenols in both sunlit surface waters and UV based water treatment processes.engineered (e.g., UV disinfection) and natural aquatic environments (e.g., surface fresh waters).

Non-Targeted PFAS Suspect Screening and Quantification of Drinking Water Samples Collected through Community Engaged Research in North Carolina's Cape Fear River Basin

A community engaged research (CER) approach was used to provide an exposure assessment of poly- and perfluorinated (PFAS) compounds in North Carolina residential drinking water. Working in concert with community partners, who acted as liaisons to local residents, samples were collected by North Carolina residents from three different locations along the Cape Fear River basin: upper, middle, and lower areas of the river. Residents collected either drinking water samples from their homes or recreational water samples from near their residence that were then submitted by the community partners for PFAS analysis. All samples were processed using weak anion exchange (WAX) solid phase extraction and analyzed using a non-targeted suspect screening approach as well as a quantitative approach that included a panel of 45 PFAS analytes, several of which are specific to chemical industries near the collection site locations. The non-targeted approach, which utilized a suspect screening list (obtained from EPA CompTox database) identified several PFAS compounds at a level two confidence rating (Schymanski scale); compounds identified included a fluorinated insecticide, a fluorinated herbicide, a PFAS used in polymer chemistry, and another that is used in battery production. Notably, at several locations, PFOA (39.8 ng/L) and PFOS (205.3 ng/L) were at levels that exceeded the mandatory EPA maximum contaminant level (MCL) of 4 ng/L. Additionally, several sites had detectable levels of PFAS that are unique to a local chemical manufacturer. These findings were communicated back to the community partners who then disseminated this information to the local residents to help empower and aid in making decisions for reducing their PFAS exposure.

Theoretical explanation of direct photolysis and indirect photolysis of bendazone with •OH, •SO4-, and •CO3- in water: mechanism insights and ecotoxicity evaluation

Bendazone (BNTE) is an herbicide and a highly concerned pollutant in aquatic environments. Understanding the photochemical behavior of BNTE in water is crucial for evaluating its photochemical conversion process in aquatic environments. This study analyzed the direct photolysis and indirect photolysis pathways of two dissociated forms of BNTE in water through density functional theory and time-dependent density functional theory method. The results show that the reaction types of indirect photolysis of BNTE with free radicals (•OH, •SO4-, and •CO3-) are OH- addition, SO4- addition, and CO3- addition. In the process of indirect photolysis of BNTE and free radicals, the photolysis of •OH and BNTE was the easiest, followed by •SO4-. In addition, the active site of BNTE reacting with •OH is C8, and the active site of BNTE reacting with •SO4- is C10. However, the photolysis effect of •CO3- on BNTE is very small, indicating that •CO3- in water plays a secondary role in the indirect photolysis of BNTE. In the direct photolysis of BNTE, N1-C6 bond breaking is difficult to occur spontaneously in the environment due to its high endothermic property and energy barrier. The direct photolysis pathway of BNTE involves the break of the N1-S2/S2-N3/N3-C12 bond. In addition, the ecological toxicity evaluation showed that toxicity of most of the degradation products were reduced, but the toxicity level was still maintained at a harmful level. Our findings provide the photochemical fate of BNTE in aquatic environments and will help to more accurately understand their photochemical conversion mechanisms in the environment.

Chiral nanopesticides: the invincible opponent of plant viruses

Viral diseases of plants are exceptionally difficult to control in agriculture production. Recently, Gao et al. discovered that engineered site-selective nanoparticles (NPs), incorporating metal ion-based proteolytic activity and nanoscale chirality, can be used as potent, nontoxic, and environmentally friendly antiviral agents to kill plant viruses.

Tracking Fluorine during Aqueous Photolysis and Advanced UV Treatment of Fluorinated Phenols and Pharmaceuticals Using a Combined 19F-NMR, Chromatography, and Mass Spectrometry Approach

Fluorine incorporation into organic molecules has increased due to desirable changes in the molecular physiochemical properties. Common fluorine motifs include: aliphatic fluorines and -CF₃, or -F containing groups bonded directly onto an aromatic (Ar-CF₃ and Ar-F) or heteroaromatic ring. Photolysis of these compounds, either in natural or engineered systems, is a potential source of new fluorinated byproducts. Given the potential persistence and toxicity of fluorinated byproducts, monitoring of product formation during photolysis of various fluorinated motifs is needed. ¹⁹F-NMR is a means to detect and quantify these species. Ar-CF₃ and Ar-F model compounds (2-, 3-, and 4-(trifluoromethyl)phenol, 2-, 3-, 4-fluorophenol, and 2,6-, 3,5-difluorophenol) were photolyzed under a variety of aqueous conditions: pH 5, pH 7, pH 10, 1 mM H₂O₂ at pH 7 to form •OH, and 0.5 mM SO₃ ^2- at pH 10 to form e_aq ^-. Pharmaceuticals with the Ar-CF₃ (fluoxetine) and Ar-F plus pyrazole-CF₃ (sitagliptin) motifs were treated similarly. Parent molecule concentrations were monitored with high pressure liquid chromatography with a UV detector. Fluorine in the parent and product molecules was quantified with ¹⁹F-NMR and complete fluorine mass balances were obtained. High resolution mass spectrometry was used to further explore product identities. The major product for Ar-F compounds was fluoride. The Ar-CF₃ model compounds led to fluoride and organofluorine products dependent on motif placement and reaction conditions. Trifluoroacetic acid was a product of 4-(trifluoromethyl)phenol and fluoxetine. Additional detected fluoxetine products identified using mass spectrometry resulted from addition of -OH to the aromatic ring, but a dealkylation product could not be distinguished from fluoxetine by ¹⁹F-NMR. Sitagliptin formed multiple products that all retained the pyrazole-CF₃ motif while the Ar-F motif produced fluoride. ¹⁹F-NMR, mass spectrometry, and chromatography methods provide complementary information on the formation of fluorinated molecules by modification or fragmentation of the parent structure during photolysis, allowing screening for fluorinated photoproducts and development of fluorine mass balances.

Microwell Fluoride Screen for Chemical, Enzymatic, and Cellular Reactions Reveals Latent Microbial Defluorination Capacity for -CF3 Groups

The capacity to defluorinate polyfluorinated organic compounds is a rare phenotype in microbes but is increasingly considered important for maintaining the environment. New discoveries will be greatly facilitated by the ability to screen many natural and engineered microbes in a combinatorial manner against large numbers of fluorinated compounds simultaneously. Here, we describe a low-volume, high-throughput screening method to determine defluorination capacity of microbes and their enzymes. The method is based on selective binding of fluoride to a lanthanum chelate complex that gives a purple-colored product. It was miniaturized to determine biodefluorination in 96-well microtiter plates by visual inspection or robotic handling and spectrophotometry. Chemicals commonly used in microbiological studies were examined to define usable buffers and reagents. Base-catalyzed, purified enzyme and whole-cell defluorination reactions were demonstrated with fluoroatrazine and showed correspondence between the microtiter assay and a fluoride electrode. For discovering new defluorination reactions and mechanisms, a chemical library of 63 fluorinated compounds was screened in vivo with Pseudomonas putida F1 in microtiter well plates. These data were also calibrated against a fluoride electrode. Our new method revealed 21 new compounds undergoing defluorination. A compound with four fluorine substituents, 4-fluorobenzotrifluoride, was shown to undergo defluorination to the greatest extent. The mechanism of its defluorination was studied to reveal a latent microbial propensity to defluorinate trifluoromethylphenyl groups, a moiety that is commonly incorporated into numerous pharmaceutical and agricultural chemicals. IMPORTANCE Thousands of organofluorine chemicals are known, and a number are considered to be persistent and toxic environmental pollutants. Environmental bioremediation methods are avidly being sought, but few bacteria biodegrade fluorinated chemicals. To find new organofluoride biodegradation, a rapid screening method was developed. The method is versatile, monitoring chemical, enzymatic, and whole-cell biodegradation. Biodegradation of organofluorine compounds invariably releases fluoride anions, which was sensitively detected. Our method uncovered 21 new microbial defluorination reactions. A general mechanism was delineated for the biodegradation of trifluoromethylphenyl groups that are increasingly being used in drugs and pesticides.

Prioritizing Direct Photolysis Products Predicted by the Chemical Transformation Simulator: Relative Reasoning and Absolute Ranking

The United States Environmental Protection Agency's Chemical Transformation Simulator (CTS) platform implemented the first freely available reaction library to predict direct photolysis products of organic contaminants in aquatic systems. However, the initial version of the reaction library did not differentiate the formation likelihood of each predicted product, and therefore, the number of predicted products that are not observed tended to exponentially increase with the prediction generation. To alleviate this problem, we first employed relative reasoning algorithms to remove unlikely products. We then ranked different reaction schemes according to their transformation kinetics and removed slowly forming products. Applying the two strategies improved the precision (the percentage of correctly predicted products over all predicted products) by 34% and 53% for the internal evaluation set and the external evaluation set, respectively, when products from three generations were considered. This improved library also revealed new research directions to improve predictions of the dominant phototransformation products.

Fluorescence-Based Sensing of Pesticides Using Supramolecular Chemistry

The detection of pesticides in real-world environments is a high priority for a broad range of applications, including in areas of public health, environmental remediation, and agricultural sustainability. While many methods for pesticide detection currently exist, the use of supramolecular fluorescence-based methods has significant practical advantages. Herein, we will review the use of fluorescence-based pesticide detection methods, with a particular focus on supramolecular chemistry-based methods. Illustrative examples that show how such methods have achieved success in real-world environments are also included, as are areas highlighted for future research and development.