High-efficiency, Synergistic ZnO-Coated SiC Photocatalytic Filter with Antibacterial Properties

High-Density Coordinatively Unsaturated Zn Catalyst for Efficient Alkane Dehydrogenation

The exploration of non-noble metal catalysts for alkane dehydrogenation and their catalytic mechanisms is the priority in catalysis research. Here, we report a high-density coordinatively unsaturated Zn cation (Zncus) catalyst for the direct dehydrogenation (DDH) of ethylbenzene (EB) to styrene (ST). The catalyst demonstrated good catalytic performance (∼40% initial EB conversion rate and >98% ST selectivity) and excellent regeneration ability in the reaction, which is attributed to the high-density (HD) distribution and high-stability structure of Zncus active sites on the surface of zinc silicate (HD-Zncus@ZS). Density functional theory (DFT) calculations further illustrated the reaction pathway and intermediates, supporting that the Zncus sites can efficiently activate the C-H bond of ethyl on ethylbenzene. Developing the high-density Zncus catalyst and exploring the catalytic mechanism laid a good foundation for designing practical non-noble metal catalysts.

Tailoring Structural, Chemical, and Photocatalytic Properties of ZnO@β-SiC Composites: The Effect of Annealing Temperature and Environment

For achieving unified functionalities of rare-earth free materials, the development of innovative zinc oxide and β-silicon carbide (ZnO@β-SiC) composites by a solid-state reaction method is presented. The evolution of zinc silicate (Zn₂SiO₄) is evidenced by X-ray diffraction when annealed in air beyond 700 °C. Detailed X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy analyses reveal the involvement of silicon dioxide in forming Zn₂SiO₄. Transmission electron microscopy and the associated energy-dispersive X-ray spectroscopy elucidate the evolution of the zinc silicate phase at the ZnO/β-SiC interface, though it can be averted by vacuum annealing. These results manifest the importance of air in oxidizing SiC before a chemical reaction with ZnO from 700 °C. Finally, ZnO@β-SiC composites are found to be promising for methylene blue dye degradation under ultraviolet radiation, but the annealing above 700 °C is detrimental due to the evolution of a potential barrier in the presence of Zn₂SiO₄ at the ZnO/β-SiC interface.

Photocatalytic Reactor as a Bridge to Link the Commercialization of Photocatalyst in Water and Air Purification

The development of clean and sustainable teleology is vital to treat the critical environmental pollutants. In the last decade, the use of photocatalytic reactors has been widely reported for organic pollutants degradation. From photocatalysis’s application in environmental remediation, the primary technical issue to scientists is always the efficiency. The enhanced photocatalytic efficiency is mainly depended on the materials improvement. However, the design of photoreactors lags behind the development of photocatalysts, which strongly limit the widespread use of photocatalysis technology in environmental remediation. The nanoparticles separation, mass transfer limitation, and photonic efficiency have always been problematic and restrict the high photocatalytic efficiency of photoreactors. To overcome these bottleneck problems, the most popular or newfangled designs of photoreactors employed in air and water treatment has been reviewed. The purpose of this review is to systematize designs and synthesis of innovative TiO2-based photoreactors and provides detailed survey and discussion on the enhanced mechanism of photocatalytic performance in different TiO2-based photoreactors. The most studied photoreactors are the following: packed bed reactor, film reactor and membrane reactor, which have some limitations and advantages. A comprehensive comparison between the different photocatalytic performance of TiO2-based photoreactors is presented. This work aims to summarize the progress of TiO2-based photoreactors and provides useful information for the further research and development of photocatalysis for water and air purification.

Recent advances in graphite carbon nitride-based nanocomposites: structure, antibacterial properties and synergies

Bacterial infections and transmission threaten human health and well-being. Graphite carbon nitride (g-C₃N₄), a promising photocatalytic antibacterial nanomaterial, has attracted increasing attention to combat bacterial transmission, due to the outstanding stability, high efficiency and environmental sustainability of this material. However, the antibacterial efficiency of g-C₃N₄ is affected by several factors, including its specific surface area, rapid electron/hole recombination processes and optical absorption properties. To improve the efficiency of the antibacterial properties of g-C₃N₄ and extend its range of applications, various nanocomposites have been prepared and evaluated. In this review, the advances in amplifying the photocatalytic antibacterial efficiency of g-C₃N₄-based nanocomposites is discussed, including different topologies, noble metal decoration, non-noble metal doping and heterojunction construction. The enhancement mechanisms and synergistic effects in g-C₃N₄-based nanocomposites are highlighted. The remaining challenges and future perspectives of antibacterial g-C₃N₄-based nanocomposites are also discussed.

Development of Antibacterial V/TiO2-Based Galvanic Coatings for Combating Biocorrosion

Recently, TiO₂ crystals have been modified by transition-metal dopants with different physicochemical structures to attain distinguished properties. Considering the similar ionic sizes of V⁴⁺ (0.058 nm) and Ti⁴⁺ (0.061 nm), vanadium in the +4 state can be effectively incorporated into the crystal lattice of TiO₂ to tune the band gap energy by creating an impurity energy level (V⁵⁺/V⁴⁺) below the conduction band (2.1 eV) and retaining the anatase phase. In vanadium-incorporated TiO₂ (V/TiO₂), V⁴⁺ is a good dopant candidate as it can increase the lifetime of the charge carrier and reduce the electron-hole recombination rate, which results in high antibacterial activity under visible light irradiation. The present study explores the V/TiO₂-based hot-dip zinc coating with enhanced electrochemical properties and long-term stability for combating biocorrosion. All the composites and the coatings are characterized by different techniques, including X-ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, energy-dispersive X-ray analysis, confocal laser scanning microscopy, optical surface profilometry, and X-ray photoelectron spectroscopy. The biofilm formation assay and the cell viability assay reveal that the tuned composition of the V/TiO₂-based hot-dip zinc coating effectively kills the adherent bacteria and inhibits biofilm formation on the surface. The high-charge-transfer resistance (225.67, 223.63, and 242.35 Ω cm²) and the high-inhibition efficiency (92.24, 92.30, and 92.02%) of the tuned composition of the V/TiO₂-based hot-dip zinc coating confirm its efficient and sustainable antibiocorrosion performance and long-term stability even after an exposure period of 21 days in different bacterial environments. With the inherent antibacterial properties and antibiocorrosion performance of the developed V/TiO₂-based hot-dip zinc coating, the mild steel substrates can find potential application in different fields, including aquatic and marine environments.

A novel n-type CdS nanorods/p-type LaFeO3 heterojunction nanocomposite with enhanced visible-light photocatalytic performance

In this work, a novel n-type CdS nanorods/p-type LaFeO3 (CdS NRs/LFO) nanocomposite was prepared, for the first time, via a facile solvothermal method. The as-prepared n-CdS NRs/p-LFO nanocomposite was characterized by using powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), energy-dispersive X-ray spectroscopy (EDX), UV-visible diffuse reflection spectroscopy (DRS), vibrating sample magnetometry (VSM), photoluminescence (PL) spectroscopy, and Brunauer-Emmett-Teller (BET) surface area analysis. All data revealed the attachment of the LFO nanoparticle on the surface of CdS NRs. This novel nanocomposite was applied as a novel visible light photocatalyst for the degradation of methylene blue (MB), rhodamine B (RhB) and methyl orange (MO) dyes under visible-light irradiation. Under optimized conditions, the degradation efficiency was 97.5% for MB, 80% for RhB and 85% for MO in the presence of H2O2 and over CdS NRs/LFO nanocomposite. The photocatalytic activity of CdS NRs/LFO was almost 16 and 8 times as high as those of the pristine CdS NRs and pure LFO, respectively. The photocatalytic activity was enhanced mainly due to the high efficiency in separation of electron-hole pairs induced by the remarkable synergistic effects of CdS and LFO semiconductors. After the photocatalytic reaction, the nanocomposite can be easily separated from the reaction solution and reused several times without loss of its photocatalytic activity. Trapping experiments indicated that ·OH radicals were the main reactive species for dye degradation in the present photocatalytic system. On the basis of the experimental results and estimated energy band positions, the mechanism for the enhanced photocatalytic activity was proposed.

Antibacterial and Photocatalytic Properties of ZnO-9-Aminoacridine Hydrochloride Hydrate Drug Nanoconjugates

The development of nanomaterial-based hybrid systems for healthcare and energy-related materials has attracted significant attention nowadays. Here, we have designed a nanocomposite of ZnO nanoparticles (NPs) with anticancer therapeutic drug 9-aminoacridine hydrochloride hydrate (9AA-HCl) for antibacterial and photocatalytic activities. Spectroscopic studies reveal that the photoinduced electron transfer from photoexcited 9AA-HCl to the conduction band of ZnO NP causes the generation of the reactive oxygen species (ROS), which is responsible for antibacterial activity and photocatalytic properties. It is seen that the efficiency of photodegradation of dye molecules increases in ZnO-9AA-HCl nanoconjugated systems than pure ZnO nanoparticles because of efficient charge separation. In addition, the antibacterial efficacy of the nanoconjugate is investigated using a strain of Gram-negative bacteria where the cell-killing activities are observed 99.99 and 100% for 20 and 21 μL/mL nanoconjugate, respectively, and very little cell-killing activity is observed for free ZnO NPs and free drug. Moreover, it is also observed that the nanoconjugate generates sufficient intracellular ROS that can hydrolyze 2',7'-dichlorodihydrofluoresceindiacetate (DCFH-DA) to highly fluorescent 2',7'-dichlorofluorescein (DCF). The outcome of the study will provide valuable information for designing new-edge nanoconjugate materials for potential applications in photocatalytic and antibacterial activities.

Quasi-polymeric construction of stable perovskite-type LaFeO3/g-C3N4 heterostructured photocatalyst for improved Z-scheme photocatalytic activity via solid p-n heterojunction interfacial effect

Materials of perovskite-type structure have attracted considerable attention for their applications in photocatalysis. In this study, a novel composite of p-type LaFeO₃ microsphere coated with n-type nanosized graphitic carbon nitride nanosheets was constructed by the quasi-polymeric calcination method with the aid of electrostatic self-assembly interaction. Results indicate that the LaFeO₃/g-C₃N₄p-n heterostructured photocatalyst obtained, in contrast to the pure constituents, enabled improved visible-light absorption, and more efficient separation and migration of charge carriers via solid p-n heterojunction interfacial effect. Correspondingly, the LaFeO₃/g-C₃N₄ composite allowed for higher visible-light-responsive photocatalytic activity for the degradation of Brilliant Blue, which was 16.9 and 7.8 times that of pristine g-C₃N₄ and LaFeO₃, respectively. The photocatalytic degradation of Brilliant Blue was ascribed to the combined contributions of the photogenerated holes (h⁺), superoxide radicals (O₂^-) and hydroxyl radicals (OH). Based on solid p-n heterojunction interfacial interaction, a Z-scheme charge carrier transfer pathway integrated with the dye-sensitization effect is proposed as the underlying mechanism of the photocatalytic reaction process. Therefore, we believe that the perovskite-type LaFeO₃/g-C₃N₄ Z-scheme photcatalyst promotes the development of photocatalysis and holds much promise for environmental remediation.

Highly Efficient Photocatalyst Based on a CdS Quantum Dots/ZnO Nanosheets 0D/2D Heterojunction for Hydrogen Evolution from Water Splitting

A novel CdS/ZnO heterojunction constructed of zero-dimensional (0D) CdS quantum dots (QDs) and two-dimensional (2D) ZnO nanosheets (NSs) was rationally designed for the first time. The 2D ZnO NSs were assembled into ZnO microflowers (MFs) via an ultrasonic-assisted hydrothermal procedure (100 °C, 12 h) in the presence of a NaOH solution (0.06 M), and CdS QDs were deposited on both sides of every ZnO NS in situ by using the successive ionic-layer absorption and reaction method. It was found that the ultrasonic treatment played an important role in the generation of ZnO NSs, while NaOH was responsible to the assembly of a flower-like structure. The obtained CdS/ZnO 0D/2D heterostructures exhibited remarkably enhanced photocatalytic activity for hydrogen evolution from water splitting in comparison with other CdS/ZnO heterostructures with different dimensional combinations such as 2D/2D, 0D/three-dimensional (3D), and 3D/0D. Among them, CdS/ZnO-12 (12 deposition cycles of CdS QDs) exhibited the highest hydrogen evolution rate of 22.12 mmol/g/h, which was 13 and 138 times higher than those of single CdS (1.68 mmol/g/h) and ZnO (0.16 mmol/g/h), respectively. The enhanced photocatalytic activity can be attributed to several positive factors, such as the formation of a Z-scheme photocatalytic system, the tiny size effect of 0D CdS QDs and 2D ZnO NSs, and the intimate contact between CdS QDs and ZnO NSs. The formation of a Z-scheme photocatalytic system remarkably promoted the separation and migration of photogenerated electron-hole pairs. The tiny size effect effectively decreased the recombination probability of electrons and holes. The intimate contact between the two semiconductors efficiently reduced the migration resistance of photogenerated carriers. Furthermore, CdS/ZnO-12 also presented excellent stability for photocatalytic hydrogen evolution without any decay within five cycles in 25 h.

Nanomaterials-modified cellulose paper as a platform for biosensing applications

Recently, paper substrates have attracted tremendous interest from both academia and industry. Not only is paper highly abundant and portable, it is lightweight, disposable, easy-to-use, and can be rolled or folded into 3D configurations. More importantly, with a unique porous bulk structure and rough and absorptive surface properties, the construction of nanomaterials-functionalized cellulose has enabled cellulose paper to be applied for point-of-care (POC) paper devices with reasonably good performance at low cost. In this review, the latest advances in the modification of nanomaterials on paper cellulose are summed up. To begin with, the attractive properties of paper-based analytical devices are described. Then, fabricating methods for the functionalization of cellulose with diverse materials, including noble metals, bimetals, metal oxides, carbon nanomaterials, and molecular imprinting polymer nanoparticles, as well as their applications, are introduced in detail. Finally, the current critical issues, challenges, and future prospectives for exploring a paper-based analytical system based on nanomaterials-modified cellulose are discussed. It is believed that more strategies will be developed in the future to construct nanomaterials-functionalized cellulose, paving the way for the mass production of POC paper devices with a satisfactory performance.

A promising carbon fiber-based photocatalyst with hierarchical structure for dye degradation

To fabricate a novel photocatalyst, ZnO seeds were uniformly deposited on carbon fibers via atomic layer deposition followed by hydrothermal growth of ZnO nanorods, then Pt nanoparticles were deposited by DC magnetron sputtering.