Controllable 3D Hot-Junctions of Silver Nanoparticles Stabilized by Amphiphilic Tri-block Copolymer/Graphene Oxide Hybrid Surfactants for Use as Surface-Enhanced Raman Scattering Substrates

Flexible nanohybrid substrates utilizing gold nanocubes/nano mica platelets with 3D lightning-rod effect for highly efficient bacterial biosensors based on surface-enhanced Raman scattering

In this study, gold nanocubes (AuNCs) were quickly synthesized using the seed-mediated growth method and reduced onto the surface of two-dimensional (2D) delaminated nano mica platelets (NMPs), enabling the development of AuNCs/NMPs nanohybrids with a 3D lightning-rod effect. First, the growth-solution amount can be changed to easily adjust the AuNCs average-particle size within a range of 30-70 nm. The use of the cationic surfactant cetyltrimethylammonium chloride as a protective agent allowed the surface of AuNCs and nanohybrids to be positively charged. Positively charged nanohybrid surfaces presented a good adsorption effect for detecting molecules with negative charges on the surface. Additionally, the NMP surfaces were rich in ionic charges and provided a large specific surface area for stabilizing the growth of AuNCs. Delaminated AuNCs/NMPs nanohybrids can generate a 3D hotspot effect through self-assembly to enhance the Raman signal. Surface-enhanced Raman scattering (SERS) is highly sensitive in detecting adenine biomolecules. Its limit of detection (LOD) and Raman enhancement factor reached 10-9 M and 3.6 × 108, respectively. Excellent reproducibility was obtained owing to the relatively regular arrangement of AuNC particles, and the relative standard deviation (RSD) was 10.7%. Finally, the surface of NMPs was modified by adding the hydrophilic poly(oxyethylene)-diamine (POE2000) and amphiphilic PIB-POE-PIB copolymer at different weight ratios. The adjustment of the surface hydrophilicity and hydrophobicity of AuNCs/NMPs nanohybrids led to better adsorption and selectivity for bacteria. AuNCs/POE/NMPs and AuNCs/PIB-POE-PIB/NMPs were further applied to the SERS detection of hydrophilic Staphylococcus aureus and hydrophobic Escherichia coli, respectively. The SERS-detection results suggest that the LOD of hydrophilic Staphylococcus aureus and hydrophobic Escherichia coli reached 92 CFU mL-1 and 1.6 × 102 CFU mL-1, respectively. The AuNCs/POE/NMPs and AuNCs/PIB-POE-PIB/NMPs nanohybrids had different hydrophilic-hydrophobic affinities, which greatly improved the selectivity and sensitivity for detecting bacteria with different hydrophilicity and hydrophobicity. Therefore, fast, highly selective, and highly sensitive SERS biological-detection results were obtained.

Application of Nanohybrid Substrates with Layer-by-Layer Self-Assembling Properties to High-Sensitivity Surface-Enhanced Raman Scattering Detection

The present study was conducted to prepare and investigate large-area, high-sensitivity surface-enhanced Raman scattering (SERS) substrates. Organic/inorganic nanohybrid dispersants consisting of an amphiphilic triblock copolymer (hereafter referred to simply as "copolymer") and graphene oxide (GO) were used to stabilize the growth and size of gold nanoparticles (AuNPs). Ion-dipole forces were present between the AuNPs and copolymer dispersants, while the hydrogen bonds between GO and the copolymer prevented the aggregation of GO, thereby stabilizing the AuNP/GO nanohybrids. Transmission electron microscopy (TEM) revealed that the AuNPs had particle sizes of 25-35 nm and a relatively uniform size distribution. The AuNP/GO nanohybrids were deposited onto the glass substrate by using the solution drop-casting method and employed for SERS detection. The self-assembling properties of two-dimensional sheet-like GO led to a regular lamellar arrangement of AuNP/GO nanohybrids, which could be used for the preparation of large-area SERS substrates. Following removal of the copolymer by annealing at 300 °C for 2 h, measurements were obtained under scanning electron microscopy. The results confirmed that 2D GO nanosheets were capable of stabilizing AuNPs, with the final size reaching approximately 40 nm. These AuNPs were adsorbed on both sides of the GO nanosheets. Because the GO nanosheets were merely 5 nm-thick, a good three-dimensional hot-junction effect was generated along the z-axis of the AuNPs. Lastly, the prepared material was used for the SERS detection of rhodamine 6G (R6G), a commonly used highly fluorescent dye. An enhancement factor (EF) of up to 3.5 × 106 was achieved, and the limit of detection was approximately 10-10 M. Detection limits of 10-10 M and < 10-10 M were also observed with the detection of Direct Blue 200 and the biological molecule adenine. It is therefore evident that AuNP/copolymer/GO nanohybrids are large-area flexible SERS substrates that hold great potential in environmental monitoring and biological system detection applications.

Triangular gold nanoplates/two-dimensional nano mica platelets with a 3D lightning-rod effect as flexible nanohybrid substrates for SERS bacterial detection

Triangular gold nanoplates (TAuNPs) were prepared by a one-step rapid growth method and then reduced and stabilized on two-dimensional nano mica nanoplatelets (NMPs). We also prepared TAuNP/NMP nanohybrids with a three-dimensional lightning-rod effect by oxidative etching. The surface of the delaminated NMPs (only 1 nm thick) is highly charged and can provide a large specific surface area; thus, it can be used as a substrate for the stable growth of gold nanoplates. In addition, by controlling relevant synthesis parameters, the edge length of the TAuNPs can be easily adjusted in the range of 30-90 nm. During reduction of the TAuNPs, the cationic surfactant cetyltrimethylammonium chloride was added as a protective agent to surround the TAuNPs; consequently, the surface was positively charged, which facilitates adsorption for detecting molecules with negative charges. When nanohybrids were used in surface-enhanced Raman spectroscopy (SERS) to detect adenine molecules, the limit of detection concentration was 10^-9 M. The Raman enhancement factor was 5.7 × 10⁷, and the relative standard deviation (RSD) was 9.8%. Finally, this method was applied to the biological detection of Staphylococcus aureus, and the surface charge and hydrophilic properties of the material significantly improved the SERS signal of S. aureus. The limit of detection concentration was 10² CFU mL^-1, and the RSD was 11.2%. The TAuNP/NMP nanohybrids can provide very rapid and sensitive SERS detection of biomolecules.

Au Nanorods on Carbon-Based Nanomaterials as Nanohybrid Substrates for High-Efficiency Dynamic Surface-Enhanced Raman Scattering

Gold nanorods (AuNRs) with different aspect ratios were prepared by the seed-mediated growth method and combined with three carbon-based nanomaterials of multiple dimensions (i.e., zero-dimensional (0D) carbon black (CB), one-dimensional (1D) carbon nanotubes (CNTs), and two-dimensional (2D) graphene oxide (GO)). The AuNR/carbon-based nanomaterial hybrids were utilized in dynamic surface-enhanced Raman scattering (D-SERS). First, cetyltrimethylammonium bromide (CTAB) was used to stabilize and coat the AuNRs, enabling them to be dispersed in water and conferring a positive charge to the surface. AuNR/carbon-based nanomaterial hybrids were then formed via electrostatic attraction with the negatively charged carbon-based nanomaterials. Subsequently, the AuNR/carbon-based nanomaterial hybrids were utilized as large-area and highly sensitive Raman spectroscopy substrates. The AuNR/GO hybrids afforded the best signal enhancement because the thickness of GO was less than 5 nm, which enabled the AuNRs adsorbed on GO to produce a good three-dimensional hotspot effect. The enhancement factor (EF) of the AuNR/GO hybrids for the dye molecule Rhodamine 6G (R6G) reached 1 × 10⁷, where the limit of detection (LOD) was 10^-8 M. The hybrids were further applied in D-SERS (detecting samples transitioning from the wet state to the dry state). During solvent evaporation, the system spontaneously formed many hotspots, which greatly enhanced the SERS signal. The final experimental results demonstrated that the AuNR/GO hybrids afforded the best D-SERS signal enhancement. The EF value for R6G reached 1.1 × 10⁸ after 27 min, with a limit of detection of 10^-9 M at 27 min. Therefore, the AuNR/GO nanohybrids have extremely high sensitivity as molecular sensing elements for SERS and are also very suitable for the rapid detection of single molecules in water quality and environmental management.

Flexible Hybrid Electronics Nanofiber Electrodes with Excellent Stretchability and Highly Stable Electrical Conductivity for Smart Clothing

In this paper, a side-by-side, dual-nozzle electrospinning process was used to prepare a flexible hybrid electronics (FHE) material with excellent stretchable properties. A highly stable electrical conductivity was also imparted to the resulting membrane electrodes using silver nanoparticles (AgNPs) and carbon-based nanomaterials of different structures. The AgNP/carbon-based nanomaterials were coated onto bicomponent polymer nanofibers (composed of polyurethane (PU) and polyvinylidene difluoride (PVDF)) on the nanofiber membrane. The FHE nanofiber electrodes were finally integrated into clothing designed to accurately measure human body sensing signals (e.g., electrocardiography (ECG) and electromyography (EMG) signals). To effectively increase the high electrical conductivity, a polymer-type dispersant (polyisobutylene-b-poly(oxyethylene)-b-polyisobutylene, a triblock copolymer) was used to effectively and stably disperse AgNPs with different particle sizes and carbon-based nanomaterials with different geometric dimensions (e.g., zero-dimensional carbon black, one-dimensional carbon nanotubes, and two-dimensional graphene) through non-covalent adsorption. Moreover, the bicomponent PVDF-PU nanofibers were immersed in a mixed dispersant of AgNPs and carbon-based nanomaterials at low concentrations, and thermal post-treatment was conducted to improve the electrical conductivity. The AgNP/graphene oxide (GO) nanofiber electrode exhibited a continuous phase with a stable material microstructure after 5000 repetitions of 50% tension-tension fatigue testing. The waveform pattern obtained from the proposed AgNP/GO nanofiber electrode was compared with those of traditional ECG and EMG electrodes. The nanofiber web electrode treated with organic/inorganic mixed dispersants and verified via tests of its electrical and fatigue properties was found to be suitable for long-term ECG and EMG monitoring, and it has excellent potential in wearable smart sensors.

Label-free and ultrasensitive SERS detection of pesticide residues using 3D hot-junction of a Raman enhancing montmorillonite/silver nanoparticles nanocomposite

Montmorillonite (MMT) coated with roughened noble metal nanoparticles are novel hybrid nanocomposite with a wide range of applications including agriculture, materials science and biomedical engineering. Herein, we developed a hybrid nanocomposite (MMT/AgNPs) based on MMT coated with silver nanoparticles (AgNPs), which can be used as a cost-effective and efficient surface-enhanced Raman spectroscopy (SERS) substrate for the detection of pesticides in fruits and vegetables. MMT itself is negatively charged and can be assembled with positively charged AgNPs through electrostatic interactions. Moreover, MMT has a layered 2D structure that possesses a large surface area, which can load a large number of AgNPs to form more SERS hotspots for the ultrasensitive measurement. SERS performance of the MMT/AgNPs nanocomposite was tested by 5,5'-dithiobis-(2-nitrobenzoic acid) (DTNB) and the substrate can obtain the strongest SERS enhancement effect with the volume ratio of MMT/AgNPs of 1 : 10. These substrates were applied in the measurement of thiram in apples and spinach samples by SERS. Detection limits of pesticide molecules of 5.0 × 10^-8 M and 1.0 × 10^-7 M in apples and spinach, respectively, were obtained. Most importantly, MMT nanosheets are a robust platform that allowed AgNPs to be evenly and thoroughly distributed and stabilized over the substrate, improving the repeatability and stability of SERS detection. These results reveal that the MMT/AgNPs nanocomposites are suitable substrates for the real-world SERS analysis of pesticide and other contaminants in complex food matrices.

Hydrophilic-Hydrophobic Nanohybrids of AuNP-Immobilized Two-Dimensional Nanomica Platelets as Flexible Substrates for High-Efficiency and High-Selectivity Surface-Enhanced Raman Scattering Microbe Detection

A flexible hybrid substrate was developed by affixing gold nanoparticles (AuNPs) onto the surface of two-dimensional nanomica platelets (NMPs). The substrate was successfully used in biosensors with high efficiency and high selectivity through surface-enhanced Raman scattering (SERS). By controlling the amphiphilicity of the hybrid substrate, the flexible substrate was made highly selective toward biomolecules. Four different SERS substrate systems were constructed, including intercalated mica, exfoliated NMPs, hydrophilic exfoliated NMPs, and hydrophobic exfoliated NMPs. NMPs were only 1 nm thick. AuNPs adsorbed on both sides of NMPs and thus created excellent three-dimensional hot junction effects in the z-axis direction. For the detection of adenine in DNA, a satisfactory Raman enhancement factor (EF) of up to 8.9 × 10⁶ was achieved with the detection limit as low as 10^-8 M. Subsequently, the AuNP/NMP hybrids were adopted to rapidly detect hydrophilic Staphylococcus hominis and hydrophobic Escherichia coli. The AuNP/PIB-POE-PIB/NMP nanohybrid was concurrently hydrophilic and hydrophobic. This amphiphilic property greatly enhanced the detection selectivity and signal intensity for hydrophilic or hydrophobic bacteria. Overall, AuNPs/PIB-POE-PIB/NMPs developed as SERS substrates enable rapid, sensitive biodetection.

Immobilization of Air-Stable Copper Nanoparticles on Graphene Oxide Flexible Hybrid Films for Smart Clothes

Through the use of organic/inorganic hybrid dispersants—which are composed of polymeric dispersant and two-dimension nanomaterial graphene oxide (GO)—copper nanoparticles (CuNPs) were found to exhibit nano stability, air-stable characteristics, as well as long-term conductive stability. The polymeric dispersant consists of branched poly(oxyethylene)-segmented esters of trimellitic anhydride adduct (polyethylene glycol−trimethylolpropane−trimellitic anhydride, designated as PTT). PTT acts as a stabilizer for CuNPs, which are synthesized via in situ polymerization and redox reaction of the precursor Cu(CH₃COO)₂ within an aqueous system, and use graphene oxide to avoid the reduction reaction of CuNPs. The results show that after 30 days of storage the CuNPs/PTT/GO composite film maintains a highly conductive network (9.06 × 10⁻¹ Ω/sq). These results indicate that organic/inorganic PTT/GO hybrid dispersants can effectively maintain the conductivity stability of CuNPs and address the problem of CuNP oxidation. Finally, the new CuNPs/PTT/GO composite film was applied to the electrocardiogram (ECG) smart clothes. This way, a stable and antioxidant-sensing electrode can be produced, which is expected to serve as a long-term ECG monitoring device.

Enhanced Efficiency of Dye-Sensitized Solar Cells Based on Polymer-Assisted Dispersion of Platinum Nanoparticles/Carbon Nanotubes Nanohybrid Films as FTO-Free Counter Electrodes

In this study, polymer-assisted dispersants are used to stabilize the nanohybrids of platinum nanoparticles (PtNPs)/carbon nanotubes (CNTs) through non-covalent bond forces. These dispersants aim to replace the florine-doped tin oxide (FTO) glass in traditional dye-sensitized solar cells (DSSCs) as counter electrodes. The large specific surface area, high conductivity, and redox potential of PtNPs/CNT nanohybrids are used as the basis to utilize them as the counter electrode material to fabricate a dye-sensitized solar cell. The conductivity results indicate that the resistance of the PtNP/CNT nanohybrid film can be reduced to 7.25 Ω/sq. When carbon nanotubes are mixed with platinum nanoparticles at a weight ratio of 5/1, the photoelectric conversion efficiency of DSSCs can reach 6.28%. When using the FTO-containing substrate as the counter electrode, its conversion efficiency indicates that the micro-/nano-hybrid material formed by PtNPs/CNTs also exhibits an excellent photoelectric conversion efficiency (8.45%) on the traditional FTO substrate. Further, a large-area dye-sensitive cell is fabricated, showing that an 8 cm × 8 cm cell has a conversion efficiency of 7.95%. Therefore, the traditional Pt counter electrode can be replaced with a PtNP/CNT nanohybrid film, which both provides dye-sensitive cells with a high photoelectric conversion efficiency and reduces costs.

Controlling the Structures, Flexibility, Conductivity Stability of Three-Dimensional Conductive Networks of Silver Nanoparticles/Carbon-Based Nanomaterials with Nanodispersion and their Application in Wearable Electronic Sensors

This research has successfully synthesized highly flexible and conductive nanohybrid electrode films. Nanodispersion and stabilization of silver nanoparticles (AgNPs) were achieved via non-covalent adsorption and with an organic polymeric dispersant and inorganic carbon-based nanomaterials-nano-carbon black (CB), carbon nanotubes (CNT), and graphene oxide (GO). The new polymeric dispersant-polyisobutylene-b-poly(oxyethylene)-b-polyisobutylene (PIB-POE-PIB) triblock copolymer-could stabilize AgNPs. Simultaneously, this stabilization was conducted through the addition of mixed organic/inorganic dispersants based on zero- (0D), one- (1D), and two-dimensional (2D) nanomaterials, namely CB, CNT, and GO. Furthermore, the dispersion solution was evenly coated/mixed onto polymeric substrates, and the products were heated. As a result, highly conductive thin-film materials (with a surface electrical resistance of approximately 10-2 Ω/sq) were eventually acquired. The results indicated that 2D carbon-based nanomaterials (GO) could stabilize AgNPs more effectively during their reductNion and, hence, generate particles with the smallest sizes, as the COO- functional groups of GO are evenly distributed. The optimal AgNPs/PIB-POE-PIB/GO ratio was 20:20:1. Furthermore, the flexible electrode layers were successfully manufactured and applied in wearable electronic sensors to generate electrocardiograms (ECGs). ECGs were, thereafter, successfully obtained.

Immobilization and 3D Hot-Junction Formation of Gold Nanoparticles on Two-Dimensional Silicate Nanoplatelets as Substrates for High-Efficiency Surface-Enhanced Raman Scattering Detection

We synthesize a high-efficiency substrate for surface-enhanced Raman scattering (SERS) measurements, which is composed of gold nanoparticles (AuNPs) on two-dimensional silicate nanoplatelets acting as an inorganic stabilizer, via the in-situ reduction of hydrogen tetrachloroaurate (III) by sodium citrate in an aqueous solution. Silicate platelets of ~1-nm thickness and various sizes, viz. laponite (50 nm), sodium montmorillonite (Na⁺⁻MMT, 100 nm), and mica (500 nm), are used to stabilize the AuNPs (Au@silicate), which are formed with uniform diameters ranging between 25 and 30 nm as confirmed by transmission electron microscopy (TEM). In particular, the laponite SERS substrate can be used in biological, environmental, and food safety applications to measure small molecules such as DNA (adenine molecule), dye (Direct Blue), and herbicide (paraquat) as it shows high detection sensitivity with a detection limit of 10-9 M for adenine detection. These highly sensitive SERS substrates, with their three-dimensional hot-junctions formed with AuNPs and two-dimensional silicate nanoplatelets, allow the highly efficient detection of organic molecules. Therefore, these Au@silicate nanohybrid substrates have great potential in biosensor technology because of their environmentally-friendly and simple fabrication process, high efficiency, and the possibility of rapid detection.

Graphene-based nanoplatforms for surface-enhanced Raman scattering sensing

Surface-enhanced Raman scattering (SERS) is one of the important techniques for sensing applications in biological analysis, disease diagnosis, environmental science, and food safety. Graphene provides an excellent nanoplatform for SERS sensing due to its two-dimensional flat structure, uniform electronic and photonic properties, excellent mechanical stability, atomic uniformity, and high biocompatibility. In this review, we summarize recent advances in the fabrication of various graphene-based nanoplatforms for SERS sensing. We present the strategies, such as self-assembly, in situ synthesis, one-pot synthesis, liquid phase reduction, and biomimetic synthesis, for the fabrication of graphene-based hybrid metallic and alloy nanoplatforms, and then demonstrate the potential applications of graphene-based nanoplatforms for the SERS sensing of ions, organic dyes, pesticides, bacteria, DNA, proteins, cells, and other chemicals in great detail. In addition, we also discuss the future development of this interesting research field and provide several perspectives. This work will be helpful for readers to understand the fabrication and sensing mechanisms of graphene-based SERS sensing nanoplatforms; meanwhile, it will promote the development of new materials and novel methods for high performance sensing and biosensing applications.