Addition of Pd on La0.7Sr0.3CoO3 Perovskite To Enhance Catalytic Removal of NOx

Regulating socketed geometry of nanoparticles on perovskite oxide supports for enhanced stability in oxidation reactions

Heterogeneous catalysts with highly dispersed active particles on supports often face stability challenges during high-temperature industrial applications. The ex-solution strategy, which involves in situ extrusion of metals to form socketed particles, shows potential for addressing this stability issue. However, a deeper understanding of the relationship between the socketed geometry of these partially embedded nanoparticles and their catalytic performance is still lacking. Here, in situ transmission electron microscopy and theoretical calculations are utilized to investigate the oxygen-induced ex-solution process of Pd-doped LaAlO3 with varying concentrations of La vacancies (LaxAl0.9Pd0.1O3-δ). We find that the socketed geometry of Pd-based particles can be tuned by manipulating the levels of La deficiencies in the oxide support, which in turn influences the catalytic performance in high-temperature oxidation reactions. As for the socketed particles, the balance between particle size and outcrop height is crucial for determining the oxidation activity and sinter-resistance behavior. Consequently, the optimized catalyst, La0.8Al0.9Pd0.1O3-δ, exhibits superior catalytic performances, particularly high stability (still working after aging at 1000 °C for 50 h) and water resistance in various combustion reactions (e.g., CH4 oxidation and C3H8 oxidation).

Technological solutions for NOx, SOx, and VOC abatement: recent breakthroughs and future directions

NOx, SOx, and carbonaceous volatile organic compounds (VOCs) are extremely harmful to the environment, and their concentrations must be within the limits prescribed by the region-specific pollution control boards. Thus, NOx, SOx, and VOC abatement is essential to safeguard the environment. Considering the importance of NOx, SOx, and VOC abatement, the discussion on selective catalytic reduction, oxidation, redox methods, and adsorption using noble metal and non-noble metal-based catalytic approaches were elaborated. This article covers different thermal treatment techniques, category of materials as catalysts, and its structure-property insights along with the advanced oxidation processes and adsorption. The defect engineered catalysts with lattice oxygen vacancies, bi- and tri-metallic noble metal catalysts and non-noble metal catalysts, modified metal organic frameworks, mixed-metal oxide supports, and their mechanisms have been thoroughly reviewed. The main hurdles and potential achievements in developing novel simultaneous NOx, SOx, and VOC removal technologies are critically discussed to envisage the future directions. This review highlights the removal of NOx, SOx, and VOC through material selection, properties, and mechanisms to further improve the existing abatement methods in an efficient way.

Role of La-based perovskite catalysts in environmental pollution remediation

Since the advent of the industrial revolution, there has been a constant need of efficient catalysts for abatement of industrial toxic pollutants. This phenomenon necessitated the development of eco-friendly, stable, and economically feasible catalytic materials like lanthanum-based perovskite-type oxides (PTOs) having well-defined crystal structure, excellent thermal, and structural stability, exceptional ionic conductivity, redox behavior, and high tunability. In this review, applicability of La-based PTOs in remediation of pollutants, including CO, NO x and VOCs was addressed. A framework for rationalizing reaction mechanism, substitution effect, preparation methods, support, and catalyst shape has been discussed. Furthermore, reactant conversion efficiencies of best PTOs have been compared with noble-metal catalysts for each application. The catalytic properties of the perovskites including electronic and structural properties have been extensively presented. We highlight that a robust understanding of electronic structure of PTOs will help develop perovskite catalysts for other environmental applications involving oxidation or redox reactions.

Mesoporous LaCoO3 perovskite oxide with high catalytic performance for NOx storage and reduction

A mesoporous LaCoO₃ perovskite oxide (LaCoO₃-Meso) with three-dimensionally ordered helical interwoven structure was synthesized by a nano-casting method using KIT-6 as the hard template. The obtained LaCoO₃-Meso with high surface area was tested for its catalytic performance in the NO_x storage and reduction (NSR) reaction and compared with a sample synthesized by the conventional sol-gel method. The LaCoO₃-Meso showed a significant advantage for NO_x storage, with a NO_x storage capacity 2 times higher than the regular sample. LaCoO₃-Meso also exhibited improved NSR catalytic performance in the 150-450 °C temperature range, especially within 350-400 °C, where the NO_x conversion was raised for 40%. The results of X-ray photoelectron spectroscopy and X-ray absorption fine structure measurements suggested the presence of a high concentration of oxygen defects on the LaCoO₃-Meso surface. Further results provided by temperature programmed reduction and temperature programmed desorption indicated that the oxygen defects not only increase the amount of trapped NO_x, but also improve the low-temperature redox performance of the catalyst. The lower stability of NO_x species adsorbed on oxygen defects promotes the NO_x release step in the NSR reaction and benefits the regeneration of storage sites.

Advances in Designing Efficient La-Based Perovskites for the NOx Storage and Reduction Process

To overcome the inherent challenge of NOx reduction in the net oxidizing environment of diesel engine exhaust, the NOx storage and reduction (NSR) concept was proposed in 1995, soon developed and commercialized as a promising DeNOx technique over the past two decades. Years of practice suggest that it is a tailor-made technique for light-duty diesel vehicles, with the advantage of being space saving, cost effective, and efficient in NOx abatement; however, the over-reliance of NSR catalysts on high loadings of Pt has always been the bottleneck for its wide application. There remains fervent interest in searching for efficient, economical, and durable alternatives. To date, La-based perovskites are the most explored promising candidate, showing prominent structural and thermal stability and redox property. The perovskite-type oxide structure enables the coupling of redox and storage centers with homogeneous distribution, which maximizes the contact area for NOx spillover and contributes to efficient NOx storage and reduction. Moreover, the wide range of possible cationic substitutions in perovskite generates great flexibility, yielding various formulations with interesting features desirable for the NSR process. Herein, this review provides an overview of the features and performances of La-based perovskite in NO oxidation, NOx storage, and NOx reduction, and in this way comprehensively evaluates its potential to substitute Pt and further improve the DeNOx efficiency of the current NSR catalyst. The fundamental structure–property relationships are summarized and highlighted to instruct rational catalyst design. The critical research needs and essential aspects in catalyst design, including poisoner resistance and catalyst sustainability, are finally addressed to inspire the future development of perovskite material for practical application.

SO2 Resisting Pd-doped Pr1-x Cex MnO3 Perovskites for Efficient Denitration at Low Temperature

H₂ -SCR is served as the promising technology for the controlling of NO_x emission, and the Pd-based derivative catalyst exhibited high NO_x reduction performance. Effectively regulating the electronic configuration of the active component is favorable to the rational optimization of noble Pd. In this work, a series of Pr_1-x Ce_x Mn_1-y Pd_y O₃ @Ni were successfully synthesized and exhibited superior NO conversion efficiency at low temperatures. 92.7 % conversion efficiency was achieved at 200 °C over Pr_0.9 Ce_0.1 Mn_0.9 Pd_0.1 O₃ @Ni in the presence of 4 % O₂ with a GHSV of 32000 h^-1 . Meanwhile, the outstanding performance was obtained in the resistance to SO₂ (200 ppm) and H₂ O (8 %). Deduced from the results of XRD, Raman, XPS, and H₂ -TPR, the modification of d orbit states in palladium was confirmed originating from the incorporation in the B site of Pr_0.9 Ce_0.1 Mn_0.9 Pd_0.1 O₃ . The existence of higher valence (Pd³⁺ and Pd⁴⁺ ) than the bivalence in Pr_0.9 Ce_0.1 Mn_0.9 Pd_0.1 O₃ catalyst was evidenced by XPS analysis. Our research provides a new sight into the H₂ -SCR through the higher utilization of Pd.

Low-temperature NO oxidation using lattice oxygen in Fe-site substituted SrFeO3-δ

Improvement of the low-temperature activity for NO oxidation catalysts is a crucial issue to improve the NO_x storage performance in automotive catalysts. We have recently reported that the lattice oxygen species in SrFeO_3-δ (SFO) are reactive in the oxidation of NO to NO₂ at low temperatures. The oxidation of NO using lattice oxygen species is a powerful means to oxidize NO in such kinetically restricted temperature regions. This paper shows that Fe-site substitution of SFO with Mn or Co improves the properties of lattice oxygen such as the temperature and amount of oxygen release/storage, resulting in the enhancement of the activity for NO oxidation in a low-temperature range. In particular, NO oxidation on SrFe_0.8Mn_0.2O_3-δ is found to proceed even at extremely low temperatures <423 K. From oxygen release/storage profiles obtained by temperature-programmed reactions, Co doping into SFO increases the amount of released oxygen owing to the reducibility of the Co species and promotes the phase transformation to the brownmillerite phase. On the other hand, Mn doping does not increase the oxygen release amount and suppresses the phase transformation. However, it significantly decreases the oxygen migration barrier of SFO. Substitution with Mn renders the structure of SFO more robust and maintains the perovskite structure after the release of oxygen. Thus, the oxygen release properties are strongly dependent on the crystal structure change before and after oxygen release from the perovskite structure, which has a significant effect on NO oxidation and the NO_x storage performance.

Shaping a Doped Perovskite Oxide with Measured Grain Boundary Defects to Catalyze Bifunctional Oxygen Activation for a Rechargeable Zn-Air Battery

Symmetry broken configurations within a long-range atomic arrangement exhibit new physical properties, and distinctive strategies are needed to resuscitate the localized symmetry by introducing measured defects, which can be attractive in displaying enhanced catalytic activities for energy applications. Our hypothesis is validated by introducing lattice defects due to the strain originating from a slightly higher doped grain boundary (GB) than at the interconnected grains of perovskite oxide. When Pd is doped at the B-site of ABO₃-type La_0.7Sr_0.3CoO_3-δ, a marginally higher ionic radius of Pd⁴⁺ than Co³⁺ enables partial deportation of Pd⁴⁺ to the GB. Consequently, the GB unit cell is relatively expanded with a higher interplanar spacing, as observed by microscopic analysis. When the Pd concentration is increased, oxygen vacancy sites are reduced and both metallic Pd and PdO_x are exsolved at the perovskite oxide surface. With the Pd/Co ratio of 0.05, the defects originating from the Pd-modulated GB can be maximized to 1.29 ± 0.21% which enhances the bifunctional O₂ activation ability by lowering the combined overpotential of oxygen evolution and reduction reactions (OER/ORR) to 0.91 V, duly corroborated by computational studies. The fabricated rechargeable Zn-air battery has a specific capacity of 740 mA·h/g_Zn (851 mW·h/g_Zn) when discharge is performed at 10 mA/cm². Galvanostatic charge-discharge cycling with a 1 h cycle time shows 60 h stable performance. The OER/ORR bifunctional activity is found to be strongly correlated to the repositioned lattice symmetry at the perovskite GB.

Perovskite-Based Catalysts as Efficient, Durable, and Economical NOx Storage and Reduction Systems

Diesel engines operate under net oxidizing environment favoring lower fuel consumption and CO2 emissions than stoichiometric gasoline engines. However, NOx reduction and soot removal is still a technological challenge under such oxygen-rich conditions. Currently, NOx storage and reduction (NSR), also known as lean NOx trap (LNT), selective catalytic reduction (SCR), and hybrid NSR–SCR technologies are considered the most efficient control after treatment systems to remove NOx emission in diesel engines. However, NSR formulation requires high platinum group metals (PGMs) loads to achieve high NOx removal efficiency. This requisite increases the cost and reduces the hydrothermal stability of the catalyst. Recently, perovskites-type oxides (ABO3) have gained special attention as an efficient, economical, and thermally more stable alternative to PGM-based formulations in heterogeneous catalysis. Herein, this paper overviews the potential of perovskite-based formulations to reduce NOx from diesel engine exhaust gases throughout single-NSR and combined NSR–SCR technologies. In detail, the effect of the synthesis method and chemical composition over NO-to-NO2 conversion, NOx storage capacity, and NOx reduction efficiency is addressed. Furthermore, the NOx removal efficiency of optimal developed formulations is compared with respect to the current NSR model catalyst (1–1.5 wt % Pt–10–15 wt % BaO/Al2O3) in the absence and presence of SO2 and H2O in the feed stream, as occurs in the real automotive application. Main conclusions are finally summarized and future challenges highlighted.

Studies of Multiferroic Palladium Perovskites

We have studied the atomic force microscopy (AFM), X-ray Bragg reflections, X-ray absorption spectra (XAS) of the Pd L-edge, Scanning electron microscopey (SEM) and Raman spectra, and direct magnetoelectric tensor of Pd-substituted lead titanate and lead zirconate-titanate. A primary aim is to determine the percentage of Pd⁺⁴ and Pd⁺² substitutional at the Ti-sites (we find that it is almost fully substitutional). The atomic force microscopy data uniquely reveal a surprise: both threefold vertical (polarized out-of-plane) and fourfold in-plane domain vertices. This is discussed in terms of the general rules for Voronoi patterns (Dirichlet tessellations) in two and three dimensions. At high pressures Raman soft modes are observed, as in pure lead titanate, and X-ray diffraction (XRD) indicates a nearly second-order displacive phase transition. However, two or three transitions are involved: First, there are anomalies in c/a ratio and Raman spectra at low pressures (P = 1 − 2 GPa); and second, the c/a ratio reaches unity at ca. P = 10 GPa, where a monoclinic (M_c) but metrically cubic transition occurs from the ambient tetragonal P4 mm structure in pure PbTiO₃; whereas the Raman lines (forbidden in the cubic phase) remain until ca. 17 GPa, where a monoclinic-cubic transition is known in lead titanate.

Perovskite-based catalysts for the control of nitrogen oxide emissions from diesel engines

Nitrogen oxides removal over a wide range of perovskite-based catalysts together with their property-activity relationships.

Atom economy and green elimination of nitric oxide using ZrN powders

Nitric oxide (NO) may cause serious environmental problems, such as acid rain, haze weather, global warming and even death. Herein, a new low-cost, highly efficient and green method for the elimination of NO using zirconium nitride (ZrN) is reported for the first time, which does not produce any waste or any by-product. Relevant experimental parameters, such as reaction temperature and gas concentration, were investigated to explore the reaction mechanism. Interestingly, NO can be easily decomposed into nitrogen (N₂) by ZrN powders at 600°C with ZrN simultaneously transformed into zirconium dioxide (ZrO₂) gradually. The time for the complete conversion of NO into N₂ was approximately 14 h over 0.5 g of ZrN at a NO concentration of 500 ppm. This green elimination process of NO demonstrated good atom economy and practical significance in mitigating environmental problems.