Determination of Interfiber Bonded Area Based on the Confocal Laser Scanning Microscopy Technique

X-Ray Nanotomography of Individual Pulp Fibre Bonds Reveals the Effect of Wall Thickness on Contact Area

Fibre bonds play an essential role in various properties of paper. Much research has focused on their strength, but the determination of the actual contact area also provides a challenge. Many of the research methods rely on optical tools, which are restricted by the wavelength of light that is utilised. Novel X-ray computed tomography devices utilise X-rays in studying the inner structure of materials, and surpass the optical methods in terms of resolution, allowing detection of even smaller details and variations in distance between the fibres in the bond intersection area. X-ray nanotomography was used to image 26 individual cellulose fibre bonds made of springwood and summerwood fibres of refined bleached softwood kraft pulp. Various dimensional properties of the bonds were measured, most importantly the relative contact area (apparent contact area/intersection area), whose values showed wide variation from 6.4 to 85% with an average of 57.7%. Although the summerwood bonds had a somewhat smaller intersection and contact area than springwood bonds, there were no significant differences in the relative contact area between the bond types. This suggests that the effect of relative and absolute contact area on the strength differences between bond types seems to be minor.

Poly dimethyl diallyl ammonium chloride assisted cellulase pretreatment for pulp refining efficiency enhancement

The use of poly (diallyldimethylammonium chloride) (PDADMAC) as an additive in the cellulase pretreatment process (the PDADMAC-assisted cellulase pretreatment process) prior to pulp refining, was investigated, with the objective of decreasing the energy consumption and/or cellulase dosage in the pulp refining process. Results showed that PDADMAC significantly improved the cellulase adsorption onto pulp fibers, which is responsible for enhancement in the cellulase treatment efficiency. The low molecular weight PDADMAC is more effective than the high molecular weight counterpart, because it is capable of infiltrating into the fiber pores to attack the fiber internal structure, while the high molecular weight PDADMAC just stays on the fiber surfaces. The developed pretreatment process facilitates the subsequent pulp refining process. The addition of PDADMAC has negligible effect on the strength properties of pulp while reducing the energy consumption with less cellulase dosage. One version of this process concept is proposed.