Design of Nitrile Rubber with High Strength and Recycling Ability Based on Fe3+–Catechol Group Coordination

Catalytic effect of high thermal conductive SiC on the kinetics and thermodynamics of vulcanization reaction of SBR/BR-filled nano-SiC

Nano-silicon carbide (SiC) as a high thermal conductive material with an intrinsic thermal conductivity of ~ 490 W/m K was used to improve the cure characteristics, kinetics, and thermodynamics of curing reaction of styrene-butadiene rubber/butadiene rubber (SBR/BR) compounds. The considerations were carried out by non-isothermal differential scanning calorimetry (DSC). Results revealed that the presence of SiC shifted the peak and end temperatures of the curing peak to lower temperatures. The calculated activation energy of the curing reaction based on the Kissinger approach showed a descent from 409.8 to 93.8 kJ/mol by adding SiC from 0 to 7.5 phr (part per hundred rubber). Moreover, the obtained Gibbs free energy variation and equilibrium constant of the curing reaction proved that the reaction was absolutely forced and irreversible, which can be increasingly characterized as a one-way process. According to the results, SiC accelerated the curing reaction because of the increment of heat transfer into the compound. This phenomenon caused the increment of enthalpy variation of the vulcanization reaction, particularly at the SiC content of 5 phr. The achieved kinetic parameters via fitting an autocatalytic model based on the Sestàk-Berggren model by the Màlek method to describe the kinetics of the curing reaction indicated that the SiC filler had a catalytic effect on the curing reaction of SBR/BR-SiC, particularly after 2.5 phr of the filler.

Influence of UV Polymerization Curing Conditions on Performance of Acrylic Pressure Sensitive Adhesives

Acrylic pressure sensitive adhesives (PSAs) were prepared by UV polymerization under varying curing conditions of both fast and slow curing, employing high- and low-intensity UV radiation, respectively. The influences of curing conditions and isobornyl acrylate (IBOA) content on PSA performance were comprehensively investigated by measurement of their rheological, thermal, and adhesive properties. In particular, rheological characterization was accomplished by several analytical methods, such as in situ UV rheology, frequency sweep, stress relaxation, and temperature ramp tests, to understand the effect of the UV curing process and IBOA content on the viscoelastic behavior of acrylic PSAs. The slow-cured samples were observed to form more tightly crosslinked networks compared to the fast-cured. On the other hand, at high loading levels of IBOA, in the case of slow curing, the sample exhibited a contrasting trend, having the shortest stress relaxation time and the highest energy dissipation; this was due to molecular chain scission occurring in the crosslinked polymer during UV polymerization. Consequently, we successfully demonstrated the influence of monomer composition of acrylic PSAs, and that of curing conditions employed in UV polymerization. This study provides valuable insights for the development of crosslinked polymer networks of acrylic PSAs for flexible display applications.

Self-healing elastomers based on conjugated diolefins: a review

The introduction of dynamic covalent and physical crosslinks into diolefin-based elastomers improves mechanical and self-healing properties. The presence of dynamic crosslinks also helps in the reprocessing of elastomers.

Self-healing and shape memory metallopolymers: state-of-the-art and future perspectives

Recent achievements and problems associated with the use of metallopolymers as self-healing and shape memory materials are presented and evaluated.